Provided by: debarchiver_0.10.0_all bug

NAME

       debarchiver - Tool to sort debian packages into a package archive.

SYNOPSIS

       debarchiver [options]

DESCRIPTION

       The debian archiver is a tool that installs debian packages into a file structure suitable
       for apt-get, aptitude, dselect and similar tools. This can be used for updating the Debian
       system. It is meant to be used by local administrators that need special packages, or
       tweaked versions to ease administration.

       The file structure is based on the potato file structure and does not support package
       pools.

OPTIONS

       -a | --autoscan
           Does both --autoscanpackages and --autoscansources.

       --autoscanall
           Same as --scanall --autoscan.

       --autoscanpackages
           Automatically run dpkg-scanpackages after all new packages are installed.

       --autoscansources
           Automatically run dpkg-scansources after all new packages are installed.

       -b | --bzip
           Create bzip2 compressed Packages.bz2 and Sources.bz2 files.

       --cachedir dir
           The apt-ftparchive package cache directory, if --index is used. The default is
           $cachedir.

       --cinstall dir
           Where the .changes file will be installed to. Use the empty string to remove the
           .changes file instead. The default is $cinstall.

       --configfile file
           Specifies an extra configuration file to read. Will be read after etc configuration
           and after user configuration files.

       --copycmd
           The install command to use where the default is $copycmd. Both packages and .changes
           files are installed using this command.

       -d | --dest | --destdir dir
           Destination directory. The base directory where all the distribution packages will
           reside and where the $distrib/$major/$arch/$section directory structure will be
           created. The default is $destdir, relative to the input directory.

       --debug-level | --dl level
           What information that should be printed. 1=critical, 2=error, 3=normal, 4=message,
           5=debug, 6=verbose debug (modules).

       --distinputcriteria
           The criteria for what binary packages should be installed even if they do not have a
           .changes file. The default is $distinputcriteria.

       --gpgkey
           The GnuPG key to use to sign the archive.

       --gpgpassfile
           The file that provides the password to GnuPG.

       --help
           Prints this information.

       -i | --input | --indir | --inputdir dir
           This is the directory where debarchiver will look for new package versions and
           corresponding *.changes files that should be installed to the --dest directory. The
           default is $instdir.

       --ignoredestcheck
           Force install of .changes file even if some files specified in the .changes file
           already exists with wrong size or md5 hash.

       --incompletetime
           The time to allow .changes file to be incomplete in seconds.  The default is 24 hours.

       --index | -x
           Automatically run apt-ftparchive after all new packages are installed. Use this *or*
           --autoscan, not both.

       --instcmd
           DEPRECATED!

       --lockfile file
           The lockfile to use. The default is $lockfile.

       --mailcmd
           The command to use to send emails. The default behavior is to use the sendmail
           command.

       --mailformat
           Defines the format to be used to send emails with, by the command specified by
           --mailfrom. Only 'sendmail' and 'mail' formats are supported. By default debarchiver
           assumes 'sendmail' format. The argument can be one of the following:
             sendmail = use of the sendmail format
             mail     = use of the mail format

       --mailfrom
           Specify mail sender.

       --majordefault
           Default major section to use. The default is 'main'.

       --movecmd
           Command to move files (currently not used at all).

       --nosort
           Do not sort packages.

       --nostructurefix
           Do not create directories and touch Package files.

       -o | --addoverride
           Automatically add new packages to the override file.

       --quit-level level
           On what level to quit the application, see debug level.

       --rmcmd
           The remove command to use. The default is $rmcmd. This can be used to move away the
           old packages to some other place.

       --scanall
           Scan all distributions, sections, etc.

       --scandetect | -s
           Scan using 'apt-ftparchive' or 'dpkg-scan*' (dpkg-scanpackages and dpkg-scansources)
           depending on what is installed on the system. This is the recommended way. Only use
           --index or --autoscan if you know what you are doing.

       --scanonly
           Same as --nosort --nostructurefix.

       -v | --version
           Prints the version string.

CONFIGURATION FILES

       You can also place configuration files with the following names (in the following order)
       /etc/debarchiver.conf, ~/.debarchiver.conf and input.conf (relative to input directory)
       that will be read before the arguments to this program will be parsed. In the above files
       you can change the following variables:

       The configuration files are read as perl modules they should end with a true value.
       Therefore they should always end with a line that states '1;'.

       $bzip
           If set to 0 no bzip2 files will be generated. If set to 1 bzip2 files will be
           generated.

       $cachedir
           The cache directory for apt-ftparchive used if --index is used.

       $cinstall
           Where the .changes files are installed (see --cinstall above).

       $copycmd
           The install command (see --copycmd).

       $destdir
           The destination directory (see --destdir above).

       $distinputcriteria
           The criteria for which packages that should be installed even if it does not have a
           .changes file. The default is $distinputcriteria.

       %distinputdirs
           Directories (distribution => dir) to be searched for extra binary packages that does
           not need a .changes file to be installed but match $distinputcriteria.  The default is
           to accept kernel packages generated by make-kpkg (which does not generate a .changes
           file). Additionally binary packages with a valid .changes file will have the default
           distribution overridden to be the current queue directory. This cause uploads to a
           specific queue to place the package into that distribution directly.

       $gpgkey
           The GnuPG key to use to sign the archive. If this variable is set, the Release file
           for each changed section of the archive will be signed with GnuPG using $gpgkey as the
           key ID.  Unless you use a key that has no passphrase or use $gpgpassfile, you will
           need to run debarchiver interactively when using this option so that you can supply
           the passphrase.

       $gpgpassfile
           The file that contains the passphrase for the GnuPG key. See $gpgkey for more
           information.

       $ignoredestcheck
           Force install of .changes file even if some files specified in the .changes file
           already exist with wrong size or md5 hash. Default to 0 (do not ignore).

       $incompletetime
           Time to allow .changes files to be incomplete in seconds. Useful for slow uploads.
           The default is 24 hours.

       $inputdir
           The input directory (no effect in $inputconfigfile).

       $lockfile
           The lockfile to use. The default is $lockfile.

       @mailtos
           An array of strings that will receive emails. If the string contains an email address
           that one is used. If it contains an incomplete email address, i.e. @hostname, the
           username owning the file is used @ the hostname specified. If no '@' character is
           found in the string, it is considered as a field in the .changes file. Such a field
           can for example be Maintainer or Uploaders.

       $mailformat
           The format to use to send emails (see --mailformat above).

       $mailfrom
           Specifies the sender of emails. The default is none ("")

       $majordefault
           Default major section (see --majordefault above).

       $movecmd
           The move command (see --movecmd).

       %release
           Additional information to add to generated Release files. Supported keys are 'origin',
           'label', and 'description'.

       $rmcmd
           The remove command (see --rmcmd above).

       $verifysignatures
           Choose to enable (1) or disable (0) signature verification for packages uploaded into
           $inputdir (not %distinputdirs).

       $verifysignaturesdistinput
           Choose to enable (1) or disable (2) signature verification for packages uploaded into
           %distinputdirs. This works independently from $verifysignatures.

       $usermailcmd
           It allows the user to tell debarchiver to use a specific command to send emails.  You
           may also want to specify the mailformat your mail command handles by setting the value
           of the $mailformat variable. Using the --mailcmd option on the command line will
           superseed this variable.

PACKAGE INDEXING

       There are two ways to generate the indexes that apt-get relies on.

       Using --autoscanpackages, --autoscansources, or --autoscan will use dpkg-scanpackages and
       dpkg-scansources. This will generate the Packages and Sources files, but will not generate
       Contents files and can be slow with a large repository.

       Alternatively, the --index config option will call apt-ftparchive to index the package
       tree. apt-ftparchive can also generate Contents files (for use with apt-file), and can
       optionally use a cache of package information to speed up multiple runs.  The apt-
       ftparchive configuration file will be generated automatically. This is however not fully
       tested.

       You should use either --autoscanpackages and --autoscansources or --index, not both, as
       they do basically the same thing.

       The default action (and the recommended) is --scandetect that probe for installed software
       and use the best choice depending on what software you have installed (chooses between
       --index and --autoscan right now).

REJECT

       Changes files are rejected in the following conditions:
        * A file that is about to be installed already exist in the archive and is not identical
       to the one that is about to be installed.
        * Changes file is incomplete and has been there for $incompletetime time.
        * A file that is part of the Changes file is not yet big enough and the changes file has
       been there for $incompletetime time.
        * A file that is part of the Changes file is bigger than specified.
        * Verify signatures is enabled and signature do not match.

FILES

       /etc/debarchiver.conf

SEE ALSO

       apt-ftparchive(1)

AUTHOR

       Ola Lundqvist <ola@inguza.com>