Provided by: flactag_2.0.4-1_amd64 bug

NAME

       flactag - A tagger for whole album FLACs using data from the MusicBrainz service

SYNOPSIS

       flactag [options] flacfile [ flacfile ] [ flacfile ]

       ripflac basename [ /path/to/cdrom ]

       ripdataflac basename numtracks [ /path/to/cdrom ]

       checkflac flacfile

       discid devicename

RIPPING CDS TO FLAC

       IMPORTANT: I think I found a bug in cueconvert which means that any FLAC files generated
       from CDs that used INDEX marks to separate tracks that didn’t have any pre-gap would
       generate invalid disc IDs. I would urge you to use the checkflac script provided to
       compare any disks you may have ripped with their FLAC files to ensure that the discids
       match correctly. Included in this release is a SED script which will massage the TOC file
       of a CD to work around this problem. Unfortunately, the only way to recover from this is
       to re-rip the CD.

       To rip a CD to flac, simply enter ripflac <basename> (where basename is used as the base
       name of the FLAC file you will be creating. The CD in the drive will be ripped, and a FLAC
       file created containing an embedded CUE sheet. ripflac takes an optional final parameter
       for the path to the CD drive, which defaults to /dev/cdrom.

       If the original CD contains data tracks, then the FLAC conversion will fail. Should this
       happen, enter ripdataflac <basename> <range> (where basename is the same one specified in
       the first rip attempt, and range is the range of tracks to rip (e.g. if the CD has 13
       tracks, where track 13 is the data track, then the range would be 1-12). ripdataflac takes
       an optional final parameter for the path to the CD drive, which defaults to /dev/cdrom.

       During the ripping of the data CD, you will be provided with the CUE sheet in an editor.
       You should delete the data track from this CUE sheet file and save it (I will try to
       automate this process at some point).

       Both these scripts will compare the calculated discid of the FLAC file with the discid of
       the CD in the drive. If they do not match, a warning will be issued.

       The discid command can be used to display the disc ID of a CD in the drive.

DESCRIPTION

       The flactag command retrieves and writes tag information for a whole-album FLAC file. The
       data is retrieved from the MusicBrainz service. Additionally, if an Amazon ASIN is
       associated with the release, then cover art will be included in the FLAC file.

       flactag can be used either interactively or in batch mode

OPTIONS

       -v, --version
           Display the software version.

       -h, --help
           Display brief usage information.

       -d, --discid
           Display the calculated disc ID for the specified FLAC file and exit.

       -s, --submit-url
           Display the URL used to submit information for this file to the MusicBrainz service.
           Use this to submit data for your CD if the data returned does not match.

       -c, --check
           This option will compare the file’s tags against those returned from the MusicBrainz
           service. A message will be displayed indicating where the tags match or not.

       -w, --write
           This option implies --check. If the files tags differ from those returned from the
           MusicBrainz service, the tags will be written to the file.

       -f, --force-write
           If --write is specified then tags will be written even if they appear to match those
           already in the file.

       -r, --rename
           The filename will be compared with that specified by the rename rules, and if it
           doesn’t match, the file will be renamed.

       -o, --overwrite-existing
           If --rename is specified then existing files will be overwritten when renaming.

       -O <discID>, --override-discid <discID>
           Instead of calculating disc ID from the cuesheet, flactag will use the provided disc
           ID to query MusicBrainz. Only one FLAC file can be processed when this option is used.

BATCH MODE

       flactag can be used in batch mode to process an entire music collection. For example, to
       check every FLAC file, write new tags and rename appropriately:

       find /var/spool/music -name "*.flac" -print0 | xargs -0 flactag --write --rename

INTERACTIVE MODE

       If flactac is executed without any options, it will interactively process all FLAC files
       given as arguments.

       If the flactag utility does not find information for your CD, a URL will be provided to
       submit information for it. Often the MusicBrainz server will have information about the
       tracks and artist, but cannot match this up to your CD. In these circumstances, it is
       simply a matter of 'associating\' your CD’s DiskID with the correct album data on the
       MusicBrainz server. In other instances, you may be required to enter the track and album
       information into the MusicBrainz service. Once you have entered this information, you can
       re-run flactag, and the data should be downloaded from the MusicBrainz server.

       If the flactag utility finds information for your CD at the musicbrainz server, the
       application’s main window will be shown.

       This contains three main areas:

       •   The 'Albums' window. This will contain a list of albums that match the DiskID for your
           FLAC file.

       •   The 'Tracks' window. This contains a list of all the tracks on the currently selected
           album.

       •   The 'Tags' window. At startup, this will contain a list of the tags currently found in
           your FLAC file. If there are no tags present, then an empty set appropriate for the
           album will be displayed. If you make changes to these tags, an asterisk ('*') will be
           displayed to indicate that this information has been changed.

       The currently active window will be highlighted by the border and window title changing
       colour. To switch between the three windows, press the TAB key. To scroll around the
       active window, use the cursor UP and cursor DOWN keys (to scroll one line at a time) or
       the PAGE UP and PAGE DOWN keys (to scroll half a page at a time). Scrolling in the
       'Albums' window will update the information in the 'Tracks' window appropriately.

       Once the appropriate album has been selected, pressing c will copy the tags for that album
       into the 'Tags' window. These tags can then be saved to the FLAC file by pressing the w
       key.

       Pressing r will rename the file based on the settings in the configuration file
       (~/.flactag - this file is created automatically the first time you run flactag). Note
       that this facility uses the tags that are actually written to the file, so should
       generally be performed after the new tags have been written. This option will be
       unavailable if the filename and location are already correct.

       Pressing q will move to the next file specified on the command line. If all files have
       been processed, the application will exit.

FILE RENAMING DETAILS

       The following configuration file (~/.flactag) entries affect file renaming:

       •    BasePath - This is the root directory of where your music files should be stored.
           (e.g. /var/spool/music)

       •    SingleDiskFileName - This template is used to rename disks that are not part of a
           multi-disk set.

       •    MultiDiskFileName - This template is used to rename disks that are part of a
           multi-disk set.

       •    DirectoryCreatePermissions - The permissions to be set on any directory that is
           created (e.g. 0755).

       •    CreateCuesheetAfterRename - If set to true, flactag will generate a cuesheet file to
           accompany the renamed FLAC file.

       The FileName templates can accept the following parameters:

       •    %A - This will be replaced with the artist name

       •    %S - This will be replaced with the artist sort name

       •    %T - This will be replaced with the album title

       •    %D - This will be replaced with the disk number

       •    %Y - This will be replaced with the year

       •    %G - This will be replaced with the genre

       •    %1 - This will be replaced with the first character of the artist sort name

       •    %E - This will be replaced by the appropriate filename extension (flac or cue)

       If any item is used but does not have a value, then it will be stored as (for example)
       NOGENRE (if the genre tag is empty).

USING A DIFFERENT MUSICBRAINZ SERVER

       To use a different MusicBrainz server (for example if you have a local mirror) you can set
       the Server and Port parameters in the configuration file.

       e.g.

       Server=mbserver.localdomain

       Port=5000

BUGS / LIMITATIONS / FUTURE ENHANCEMENTS

       •   Once changes are written to the FLAC file, there is no way of reverting back to the
           original tags.

AUTHOR

       Written by

       Andy Hawkins, <andy@gently.org.uk>

       Daniel Pocock, <daniel@pocock.com.au>

RESOURCES

       Main web site: http://flactag.sourceforge.net

COPYING

       Copyright (C) 2007-2012 Andy Hawkins Copyright (C) 2011-2012 Daniel Pocock

       Use of this software is granted under the terms of the GNU General Public License (GPL)
       v3.

AUTHOR

       Andy Hawkins <andy@gently.org.uk>
           Author.

                                            07/01/2012                                 FLACTAG(1)