Provided by: argyll_1.5.1-5ubuntu1_amd64
NAME
Read - Read a Display.
DESCRIPTION
Read a Display, Version 1.5.1 Author: Graeme W. Gill, licensed under the AGPL Version 3 Diagnostic: Usage requested usage: dispread [options] outfile -v Verbose mode -display displayname Choose X11 display name -d n[,m] Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access 1 = 'Screen 1, Output VBOX0 at 0, 0, width 1605, height 1079' -dweb[:port] Display via a web server at port (default 8080) -c listno Set communication port from the following list (default 1) ** No ports found ** -p Use telephoto mode (ie. for a projector) (if available) -k file.cal Load calibration file into display while reading -K file.cal Apply calibration file to test values while reading -s Save spectral information (default don't save) -P ho,vo,ss[,vs] Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. -F Fill whole screen with black background -n Don't set override redirect on test window -J Run instrument calibration first (used rarely) -N Disable initial calibration of instrument if possible -H Use high resolution spectrum mode (if available) -w Disable normalisation of white to Y = 100 -X file.ccmx Apply Colorimeter Correction Matrix -X file.ccss Use Colorimeter Calibration Spectral Samples for calibration -Q observ Choose CIE Observer for spectrometer or CCSS colorimeter data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c -I b|w Drift compensation, Black: -Ib, White: -Iw, Both: -Ibw -Y A Use non-adaptive integration time mode (if available). -C "command" Invoke shell "command" each time a color is set -M "command" Invoke shell "command" each time a color is measured -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff -D [level] Print debug diagnostics to stderr outfile Base name for input[ti1]/output[ti3] file Author: Graeme W. Gill, licensed under the AGPL Version 3 Diagnostic: Usage requested usage: dispread [options] outfile -v Verbose mode -display displayname Choose X11 display name -d n[,m] Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access 1 = 'Screen 1, Output VBOX0 at 0, 0, width 1605, height 1079' -dweb[:port] Display via a web server at port (default 8080) -c listno Set communication port from the following list (default 1) ** No ports found ** -p Use telephoto mode (ie. for a projector) (if available) -k file.cal Load calibration file into display while reading -K file.cal Apply calibration file to test values while reading -s Save spectral information (default don't save) -P ho,vo,ss[,vs] Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc. -F Fill whole screen with black background -n Don't set override redirect on test window -J Run instrument calibration first (used rarely) -N Disable initial calibration of instrument if possible -H Use high resolution spectrum mode (if available) -w Disable normalisation of white to Y = 100 -X file.ccmx Apply Colorimeter Correction Matrix -X file.ccss Use Colorimeter Calibration Spectral Samples for calibration -Q observ Choose CIE Observer for spectrometer or CCSS colorimeter data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c -I b|w Drift compensation, Black: -Ib, White: -Iw, Both: -Ibw -Y A Use non-adaptive integration time mode (if available). -C "command" Invoke shell "command" each time a color is set -M "command" Invoke shell "command" each time a color is measured -W n|h|x Override serial port flow control: n = none, h = HW, x = Xon/Xoff -D [level] Print debug diagnostics to stderr outfile Base name for input[ti1]/output[ti3] file