Provided by: docker.io_1.6.2~dfsg1-1ubuntu4~14.04.1_amd64 
NAME
docker-run - Run a command in a new container
SYNOPSIS
docker run [-a|--attach[=[]]] [--add-host[=[]]] [-c|--cpu-shares[=0]] [--cap-add[=[]]] [--cap-drop[=[]]]
[--cidfile[=CIDFILE]] [--cpuset-cpus[=CPUSET-CPUS]] [-d|--detach[=false]] [--device[=[]]]
[--dns-search[=[]]] [--dns[=[]]] [-e|--env[=[]]] [--entrypoint[=ENTRYPOINT]] [--env-file[=[]]]
[--expose[=[]]] [-h|--hostname[=HOSTNAME]] [--help] [-i|--interactive[=false]] [--ipc[=IPC]]
[-l|--label[=[]]] [--label-file[=[]]] [--link[=[]]] [--lxc-conf[=[]]] [--log-driver[=[]]]
[-m|--memory[=MEMORY]] [--memory-swap[=MEMORY-SWAP]] [--mac-address[=MAC-ADDRESS]] [--name[=NAME]]
[--net[="bridge"]] [-P|--publish-all[=false]] [-p|--publish[=[]]] [--pid[=[]]] [--privileged[=false]]
[--read-only[=false]] [--restart[=RESTART]] [--rm[=false]] [--security-opt[=[]]] [--sig-proxy[=true]]
[-t|--tty[=false]] [-u|--user[=USER]] [-v|--volume[=[]]] [--volumes-from[=[]]] [-w|--workdir[=WORKDIR]]
[--cgroup-parent[=CGROUP-PATH]] IMAGE [COMMAND] [ARG...]
DESCRIPTION
Run a process in a new container. docker run starts a process with its own file system, its own
networking, and its own isolated process tree. The IMAGE which starts the process may define defaults
related to the process that will be run in the container, the networking to expose, and more, but docker
run gives final control to the operator or administrator who starts the container from the image. For
that reason docker run has more options than any other Docker command.
If the IMAGE is not already loaded then docker run will pull the IMAGE, and all image dependencies, from
the repository in the same way running docker pull IMAGE, before it starts the container from that image.
OPTIONS
-a, --attach=[]
Attach to STDIN, STDOUT or STDERR.
In foreground mode (the default when -d is not specified), docker run can start the process in the
container and attach the console to the process’s standard input, output, and standard error. It can even
pretend to be a TTY (this is what most commandline executables expect) and pass along signals. The -a
option can be set for each of stdin, stdout, and stderr.
--add-host=[]
Add a custom host-to-IP mapping (host:ip)
Add a line to /etc/hosts. The format is hostname:ip. The --add-host option can be set multiple times.
-c, --cpu-shares=0
CPU shares (relative weight)
By default, all containers get the same proportion of CPU cycles. This proportion can be modified by
changing the container's CPU share weighting relative to the weighting of all other running containers.
To modify the proportion from the default of 1024, use the -c or --cpu-shares flag to set the weighting
to 2 or higher.
The proportion will only apply when CPU-intensive processes are running. When tasks in one container are
idle, other containers can use the left-over CPU time. The actual amount of CPU time will vary depending
on the number of containers running on the system.
For example, consider three containers, one has a cpu-share of 1024 and two others have a cpu-share
setting of 512. When processes in all three containers attempt to use 100% of CPU, the first container
would receive 50% of the total CPU time. If you add a fouth container with a cpu-share of 1024, the first
container only gets 33% of the CPU. The remaining containers receive 16.5%, 16.5% and 33% of the CPU.
On a multi-core system, the shares of CPU time are distributed over all CPU cores. Even if a container is
limited to less than 100% of CPU time, it can use 100% of each individual CPU core.
For example, consider a system with more than three cores. If you start one container C0 with -c=512
running one process, and another container C1 with -c=1024 running two processes, this can result in the
following division of CPU shares:
PID container CPU CPU share
100 C0 0 100% of CPU0
101 C1 1 100% of CPU1
102 C1 2 100% of CPU2
--cap-add=[]
Add Linux capabilities
--cap-drop=[]
Drop Linux capabilities
--cgroup-parent=""
Path to cgroups under which the cgroup for the container will be created. If the path is not absolute,
the path is considered to be relative to the cgroups path of the init process. Cgroups will be created if
they do not already exist.
--cidfile=""
Write the container ID to the file
--cpuset-cpus=""
CPUs in which to allow execution (0-3, 0,1)
-d, --detach=true|false
Detached mode: run the container in the background and print the new container ID. The default is
false.
At any time you can run docker ps in the other shell to view a list of the running containers. You can
reattach to a detached container with docker attach. If you choose to run a container in the detached
mode, then you cannot use the -rm option.
When attached in the tty mode, you can detach from a running container without stopping the process by
pressing the keys CTRL-P CTRL-Q.
--device=[]
Add a host device to the container (e.g. --device=/dev/sdc:/dev/xvdc:rwm)
--dns-search=[]
Set custom DNS search domains (Use --dns-search=. if you don't wish to set the search domain)
--dns=[]
Set custom DNS servers
This option can be used to override the DNS configuration passed to the container. Typically this is
necessary when the host DNS configuration is invalid for the container (e.g., 127.0.0.1). When this is
the case the --dns flags is necessary for every run.
-e, --env=[]
Set environment variables
This option allows you to specify arbitrary environment variables that are available for the process that
will be launched inside of the container.
--entrypoint=""
Overwrite the default ENTRYPOINT of the image
This option allows you to overwrite the default entrypoint of the image that is set in the Dockerfile.
The ENTRYPOINT of an image is similar to a COMMAND because it specifies what executable to run when the
container starts, but it is (purposely) more difficult to override. The ENTRYPOINT gives a container its
default nature or behavior, so that when you set an ENTRYPOINT you can run the container as if it were
that binary, complete with default options, and you can pass in more options via the COMMAND. But,
sometimes an operator may want to run something else inside the container, so you can override the
default ENTRYPOINT at runtime by using a --entrypoint and a string to specify the new ENTRYPOINT.
--env-file=[]
Read in a line delimited file of environment variables
--expose=[]
Expose a port, or a range of ports (e.g. --expose=3300-3310), from the container without publishing it
to your host
-h, --hostname=""
Container host name
Sets the container host name that is available inside the container.
--help
Print usage statement
-i, --interactive=true|false
Keep STDIN open even if not attached. The default is false.
When set to true, keep stdin open even if not attached. The default is false.
--ipc=""
Default is to create a private IPC namespace (POSIX SysV IPC) for the container
'container:': reuses another container shared memory, semaphores and
message queues
'host': use the host shared memory,semaphores and message queues inside
the container. Note: the host mode gives the container full access to local shared memory and is
therefore considered insecure.
-l, --label=[]
Set metadata on the container (e.g., --label com.example.key=value)
--label-file=[]
Read in a line delimited file of labels
--link=[]
Add link to another container in the form of :alias
If the operator uses --link when starting the new client container, then the client container can access
the exposed port via a private networking interface. Docker will set some environment variables in the
client container to help indicate which interface and port to use.
--lxc-conf=[]
(lxc exec-driver only) Add custom lxc options --lxc-conf="lxc.cgroup.cpuset.cpus = 0,1"
--log-driver="|json-file|syslog|none"
Logging driver for container. Default is defined by daemon --log-driver flag.
Warning: docker logs command works only for json-file logging driver.
-m, --memory=""
Memory limit (format: , where unit = b, k, m or g)
Allows you to constrain the memory available to a container. If the host supports swap memory, then the
-m memory setting can be larger than physical RAM. If a limit of 0 is specified (not using -m), the
container's memory is not limited. The actual limit may be rounded up to a multiple of the operating
system's page size (the value would be very large, that's millions of trillions).
--memory-swap=""
Total memory limit (memory + swap)
Set -1 to disable swap (format: , where unit = b, k, m or g). This value should always larger than -m,
so you should alway use this with -m.
--mac-address=""
Container MAC address (e.g. 92:d0:c6:0a:29:33)
Remember that the MAC address in an Ethernet network must be unique. The IPv6 link-local address will be
based on the device's MAC address according to RFC4862.
--name=""
Assign a name to the container
The operator can identify a container in three ways:
UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”)
UUID short identifier (“f78375b1c487”)
Name (“jonah”)
The UUID identifiers come from the Docker daemon, and if a name is not assigned to the container with
--name then the daemon will also generate a random string name. The name is useful when defining links
(see --link) (or any other place you need to identify a container). This works for both background and
foreground Docker containers.
--net="bridge"
Set the Network mode for the container
'bridge': creates a new network stack for the container on the docker
bridge
'none': no networking for this container
'container:': reuses another container network stack
'host': use the host network stack inside the container. Note: the host
mode gives the container full access to local system services such as D-bus and is therefore considered
insecure.
-P, --publish-all=true|false
Publish all exposed ports to random ports on the host interfaces. The default is false.
When set to true publish all exposed ports to the host interfaces. The default is false. If the operator
uses -P (or -p) then Docker will make the exposed port accessible on the host and the ports will be
available to any client that can reach the host. When using -P, Docker will bind any exposed port to a
random port on the host within an ephemeral port range defined by /proc/sys/net/ipv4/ip_local_port_range.
To find the mapping between the host ports and the exposed ports, use docker port.
-p, --publish=[]
Publish a container's port, or range of ports, to the host.
format: ip:hostPort:containerPort | ip::containerPort |
hostPort:containerPort | containerPort
Both hostPort and containerPort can be specified as a range of ports.
When specifying ranges for both, the number of container ports in the
range must match the number of host ports in the range. (e.g., -p 1234-1236:1234-1236/tcp)
(use 'docker port' to see the actual mapping)
--pid=host
Set the PID mode for the container
host: use the host's PID namespace inside the container.
Note: the host mode gives the container full access to local PID and is therefore considered
insecure.
--privileged=true|false
Give extended privileges to this container. The default is false.
By default, Docker containers are “unprivileged” (=false) and cannot, for example, run a Docker daemon
inside the Docker container. This is because by default a container is not allowed to access any devices.
A “privileged” container is given access to all devices.
When the operator executes docker run --privileged, Docker will enable access to all devices on the host
as well as set some configuration in AppArmor to allow the container nearly all the same access to the
host as processes running outside of a container on the host.
--read-only=true|false
Mount the container's root filesystem as read only.
By default a container will have its root filesystem writable allowing processes to write files anywhere.
By specifying the --read-only flag the container will have its root filesystem mounted as read only
prohibiting any writes.
--restart="no"
Restart policy to apply when a container exits (no, on-failure[:max-retry], always)
--rm=true|false
Automatically remove the container when it exits (incompatible with -d). The default is false.
--security-opt=[]
Security Options
"label:user:USER" : Set the label user for the container
"label:role:ROLE" : Set the label role for the container
"label:type:TYPE" : Set the label type for the container
"label:level:LEVEL" : Set the label level for the container
"label:disable" : Turn off label confinement for the container
--sig-proxy=true|false
Proxy received signals to the process (non-TTY mode only). SIGCHLD, SIGSTOP, and SIGKILL are not
proxied. The default is true.
-t, --tty=true|false
Allocate a pseudo-TTY. The default is false.
When set to true Docker can allocate a pseudo-tty and attach to the standard input of any container. This
can be used, for example, to run a throwaway interactive shell. The default is value is false.
The -t option is incompatible with a redirection of the docker client standard input.
-u, --user=""
Username or UID
-v, --volume=[]
Bind mount a volume (e.g., from the host: -v /host:/container, from Docker: -v /container)
The -v option can be used one or more times to add one or more mounts to a container. These mounts can
then be used in other containers using the --volumes-from option.
The volume may be optionally suffixed with :ro or :rw to mount the volumes in read-only or read-write
mode, respectively. By default, the volumes are mounted read-write. See examples.
--volumes-from=[]
Mount volumes from the specified container(s)
Mounts already mounted volumes from a source container onto another
container. You must supply the source's container-id. To share
a volume, use the --volumes-from option when running
the target container. You can share volumes even if the source container
is not running.
By default, Docker mounts the volumes in the same mode (read-write or
read-only) as it is mounted in the source container. Optionally, you
can change this by suffixing the container-id with either the :ro or
:rw keyword.
If the location of the volume from the source container overlaps with
data residing on a target container, then the volume hides
that data on the target.
-w, --workdir=""
Working directory inside the container
The default working directory for running binaries within a container is the root directory (/). The
developer can set a different default with the Dockerfile WORKDIR instruction. The operator can override
the working directory by using the -w option.
EXAMPLES
Exposing log messages from the container to the host's log
If you want messages that are logged in your container to show up in the host's syslog/journal then you
should bind mount the /dev/log directory as follows.
# docker run -v /dev/log:/dev/log -i -t fedora /bin/bash
From inside the container you can test this by sending a message to the log.
(bash)# logger "Hello from my container"
Then exit and check the journal.
# exit
# journalctl -b | grep Hello
This should list the message sent to logger.
Attaching to one or more from STDIN, STDOUT, STDERR
If you do not specify -a then Docker will attach everything (stdin,stdout,stderr) you’d like to connect
instead, as in:
# docker run -a stdin -a stdout -i -t fedora /bin/bash
Sharing IPC between containers
Using shm_server.c available here: ⟨http://www.cs.cf.ac.uk/Dave/C/node27.html⟩ Testing --ipc=host mode: Host shows a shared memory segment with 7 pids attached, happens to be from httpd: $ sudo ipcs -m ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status 0x01128e25 0 root 600 1000 7 Now run a regular container, and it correctly does NOT see the shared memory segment from the host: $ sudo docker run -it shm ipcs -m ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status Run a container with the new --ipc=host option, and it now sees the shared memory segment from the host httpd: $ sudo docker run -it --ipc=host shm ipcs -m ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status 0x01128e25 0 root 600 1000 7 Testing --ipc=container:CONTAINERID mode: Start a container with a program to create a shared memory segment: sudo docker run -it shm bash $ sudo shm/shm_server $ sudo ipcs -m ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status 0x0000162e 0 root 666 27 1 Create a 2nd container correctly shows no shared memory segment from 1st container: $ sudo docker run shm ipcs -m ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status Create a 3rd container using the new --ipc=container:CONTAINERID option, now it shows the shared memory segment from the first: $ sudo docker run -it --ipc=container:ed735b2264ac shm ipcs -m $ sudo ipcs -m ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status 0x0000162e 0 root 666 27 1
Linking Containers
The link feature allows multiple containers to communicate with each other. For example, a container
whose Dockerfile has exposed port 80 can be run and named as follows:
# docker run --name=link-test -d -i -t fedora/httpd
A second container, in this case called linker, can communicate with the httpd container, named
link-test, by running with the --link=:
# docker run -t -i --link=link-test:lt --name=linker fedora /bin/bash
Now the container linker is linked to container link-test with the alias lt. Running the env command in
the linker container shows environment variables
with the LT (alias) context (LT_)
# env
HOSTNAME=668231cb0978
TERM=xterm
LT_PORT_80_TCP=tcp://172.17.0.3:80
LT_PORT_80_TCP_PORT=80
LT_PORT_80_TCP_PROTO=tcp
LT_PORT=tcp://172.17.0.3:80
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
PWD=/
LT_NAME=/linker/lt
SHLVL=1
HOME=/
LT_PORT_80_TCP_ADDR=172.17.0.3
_=/usr/bin/env
When linking two containers Docker will use the exposed ports of the container to create a secure tunnel
for the parent to access.
Mapping Ports for External Usage
The exposed port of an application can be mapped to a host port using the -p flag. For example, a httpd
port 80 can be mapped to the host port 8080 using the following:
# docker run -p 8080:80 -d -i -t fedora/httpd
Creating and Mounting a Data Volume Container
Many applications require the sharing of persistent data across several containers. Docker allows you to
create a Data Volume Container that other containers can mount from. For example, create a named
container that contains directories /var/volume1 and /tmp/volume2. The image will need to contain these
directories so a couple of RUN mkdir instructions might be required for you fedora-data image:
# docker run --name=data -v /var/volume1 -v /tmp/volume2 -i -t fedora-data true
# docker run --volumes-from=data --name=fedora-container1 -i -t fedora bash
Multiple --volumes-from parameters will bring together multiple data volumes from multiple containers.
And it's possible to mount the volumes that came from the DATA container in yet another container via the
fedora-container1 intermediary container, allowing to abstract the actual data source from users of that
data:
# docker run --volumes-from=fedora-container1 --name=fedora-container2 -i -t fedora bash
Mounting External Volumes
To mount a host directory as a container volume, specify the absolute path to the directory and the
absolute path for the container directory separated by a colon:
# docker run -v /var/db:/data1 -i -t fedora bash
When using SELinux, be aware that the host has no knowledge of container SELinux policy. Therefore, in
the above example, if SELinux policy is enforced, the /var/db directory is not writable to the container.
A "Permission Denied" message will occur and an avc: message in the host's syslog.
To work around this, at time of writing this man page, the following command needs to be run in order for
the proper SELinux policy type label to be attached to the host directory:
# chcon -Rt svirt_sandbox_file_t /var/db
Now, writing to the /data1 volume in the container will be allowed and the changes will also be reflected
on the host in /var/db.
Using alternative security labeling
You can override the default labeling scheme for each container by specifying the --security-opt flag.
For example, you can specify the MCS/MLS level, a requirement for MLS systems. Specifying the level in
the following command allows you to share the same content between containers.
# docker run --security-opt label:level:s0:c100,c200 -i -t fedora bash
An MLS example might be:
# docker run --security-opt label:level:TopSecret -i -t rhel7 bash
To disable the security labeling for this container versus running with the --permissive flag, use the
following command:
# docker run --security-opt label:disable -i -t fedora bash
If you want a tighter security policy on the processes within a container, you can specify an alternate
type for the container. You could run a container that is only allowed to listen on Apache ports by
executing the following command:
# docker run --security-opt label:type:svirt_apache_t -i -t centos bash
Note:
You would have to write policy defining a svirt_apache_t type.
HISTORY
April 2014, Originally compiled by William Henry (whenry at redhat dot com) based on docker.com source
material and internal work. June 2014, updated by Sven Dowideit ⟨SvenDowideit@home.org.au⟩ July 2014,
updated by Sven Dowideit ⟨SvenDowideit@home.org.au⟩