Provided by: whitedune_0.30.10-1.3_amd64 
NAME
dune - graphical vrml97 editor and animation tool
SYNOPSIS
dune [ variantoptions ] [ stereoviewoptions ] [ inputdeviceoptions [ axisoptions ] [
miscoptions ] [ file.wrl file.x3dv file.xml ... ]
dune [ conversionoption ] filename
dune -illegal2vrml [ -prefix prefix ] protofile.wrl file.wrl ...
DESCRIPTION
dune / white_dune is a graphical editor for the Virtual Reality Modeling Language
(VRML97), ISO/IEC 14772-1:1997.
Additionally it has support for the NurbsSurface Node described in VRML97 Amendment 1.
white_dune can also load and store VRML encoded X3DV files
It can also load X3D files with XML encoding, if configured to use a commandline
vrml97/x3d translator.
A filename of - means standart input.
Dune has some basic support for stereographic view usually with shutterglases in OpenGL
"quadbuffer" mode.
When used with the conversionoptions or the -illegal2vrml commandline argument,
white_dune is a non graphical commandline program.
The conversionoptions are used to convert the VRML/X3DV file into sourcecode or a other 3D
graphics format. This options are used in the commandline, but some options require a
graphics context (e.g. in the simplest case a usage within a xterm command), cause some of
the conversion options require the usage of OpenGL commands. To create a OpenGL context,
there are 3 different ways.
First open a temporay graphics window, do the conversion and close the graphics window and
exit. This is currently used under M$Windows.
Second is to use Mesa off screen rendering (the program was compiled with the --with-
osmesa configure option). With Mesa off screen rendering it is possible to use OpenGL
commands in a pure commandline program.
Third is to use glx based off screen rendering under Linux/UNIX/MacOSX. In this case, no
the program do not open a graphics window, but requires a working X11 display anyway. On a
text console the Xvfb X11 server program can be used to get a working X11 display.
The -illegal2vrml option is used to repair VRML97 files with illegal extensions.
See the illegal2vrml(1) manpage for more information.
VARIANTOPTIONS
-4kids start dune with a simplified GUI as simple 3D modeller for kids.
-x3dv if no file is loaded, start dune with a new X3DV file.
Per default, dune is started with a new VRML97 file.
-kambi start dune with support for unportable extension nodes only usable with the kambi
VRML gameengine.
-cover start dune with support for unportable extension nodes only usable with the special
immersive VRML97 viewer cover/covise.
-4catt start dune with a simplified GUI as a exporter/converter for users of the CATT 8
sound simulation software.
-bw Use black and white icons instead of colored icons
-german
Use german menu, dialogs and errormessages
-italian
Use italian menu and dialogs, errormessages are still in english language
-english
Use english menu, dialogs and errormessages. This is the default can be used to
overwrite the setting of the LANG environment variable.
CONVERSIONOPTIONS
-vrml97
Convert file to VRML97 ISO/IEC 14772-1:1997, write it to standart output and exit.
-vrml97levelx3dv
Convert file to VRML97 ISO/IEC 14772-1:1997 compatible parts of X3D classic VRML
encoding ISO/IEC ISO/IEC 19776-2:2005, write it to standart output and exit.
-x3d Convert file to XML encoded X3D, write it to standard output and exit.
-kanim filenamepattern
Convert file to the kanim fileformat and write it to standard output.
The kanim fileformat is a XML file with references to different VRML files. The
VRML files are generated too, their name is generated based on filenamepattern: The
filenamepattern is shortend from the fileextension and then extended with a
underscore, a increasing number and the .wrl extension.
All VRML files describe the same VRML scene with same the nodes, but some numeric
fields are animated.
This type of file is used by the open source VRML based Kambi gameengine. It makes
no sense to export a kanim file, if the exported VRML file do not contain
timesensor/interpolator based animation.
-wonderland moduleDirectory
Convert file to a java source file included in a directory structure needed to
build a SUN wonderland version 0.5 module and exit.
If the root directory of the module is build from the input filename (without
extension) as moduleDirectory/exportX3dv/filename
If this directory and the other needed files do not exists, this files are also
created. If the other files exist, they are not overwritten, only the target java
source itself is overwritten. The name of the target java source file is
moduleDirectory/exportX3dv/filename/src/classes/org/jdesktop/wonderland/modules/filename/client/jme/cellrenderer/filename.java
The first character of the target java source file is uppercase.
To get a wonderland module from the moduleDirectory/exportX3dv/filename directory,
chance into this directory and run the ant command. A usual jar file of the
wonderland module can then be found in the moduleDirectory/exportX3dv/filename/dist
directory.
When compiling the output of the wonderland java source export with the command
ant, the java compiler may get out of memory resources.
To fix the problem, you can set the memory limits by extending the javac tag in the
file wonderland/build-tools/build-scripts/build-setup.xml e.g.
<javac ...
...
fork="true"
memoryinitialsize="256m"
memorymaximumsize="1024m"
>
Currently, the -wonderland option only support static 3D modeller output without
animation or interaction.
These features are work in progress and are still to be done.
This option uses OpenGL commands.
-x3d4wonderland
Convert file to XML encoded X3D for import in SUN wonderland 0.4, write it to
standard output and exit.
SUN wonderland 0.4 only support IndexedFaceSets with colorPerVertex and fullsize
Color nodes. This exporter tries to convert other nodes to this IndexedFaceSets,
but can (currently) not correctly convert nodes with colorPerVertex false and
fullsize Color nodes.
This option uses OpenGL commands.
-ac3d Convert file to the AC3D format (Version AC3Db), write it to standart output and
exit. This option uses OpenGL commands.
The AC3D file format is the input/output file format of the 3D modeller ac3d.
The ac3d 3d modeller do not support several features of VRML/X3D (e.g. the ac3d 3d
modeller do not support animation or interaction). Therefore the AC3D file format
can not keep the complete information of a VRML/X3D file in general.
-catt8geo outputdir_with_material_geo
Convert file to the catt geo format (Version 8), write it to several .geo formats
to the directory outputdir_with_material_geo and exit.
The catt geo file format is the input geometry file format of the catt acustic
simulation program.
The master.geo file in this directory outputdir_with_material_geo will hold include
commands for the other produced .geo files.
In the directory, a file material.geo with the needed ABS commands must exist
before conversion. The material names for the ABS names are generated from the DEF
names of the VRML nodes.
If the material.geo file do not exist in the outputdir_with_material_geo directory,
white_dune fails with a errormessage.
Despite the catt programm can export VRML97 files, it do not support several
features of VRML/X3D.
Therefore the catt geo file format can not keep the information of a VRML/X3D file
in general.
This option uses OpenGL commands.
-ldraw Convert file to the major part of the ldraw fileformat and write it to standard
output.
The header of the ldraw file is not generated. The header is a important part of a
ldraw file and should have been written to standard output earlier (typically this
is done from a batch script).
The ldraw fileformat is a ASCII fileformat which is used to exchange 3D data
between several open source plastic brick description programs. A example for such
a program is LeoCAD.
-prefix prefix
The -prefix option in conjunction with conversion is only used for the following
options to create source code. It can be used to define a leading prefix for the
name of the data structures in the source code output.
For example, the source code creates data types named "Node", "Scenegraph" and
"Callback". To avoid problems with other libraries, adding options like for example
"-prefix X3d" would change the names to "X3dNode", "X3dSceneGraph" and
"X3dCallback".
-c Converts file to a C header/source file, write it to standard output and exit.
Currently, information about routes are not exported.
See section C/C++/JAVA SOURCE EXPORT for more information.
+c prefix
This option is very similar to the -c option, but writes a incomplete source file,
which can be concatinated to a sourcefile written by the -c option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-3c This option is similar to the -c option, but surfaces are first triangulated and
then exported as TriangleSet nodes.
This option uses OpenGL commands.
+3c prefix
This option is very similar to the -3c option, but writes a incomplete source file,
which can be concatinated to a sourcefile written by the -3c option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-meshc This option is similar to the -c option, but surfaces are first converted to a
polygon mesh and then exported as IndexedFaceSet nodes.
+meshc prefix
This option is very similar to the -meshc option, but writes a incomplete source
file, which can be concatinated to a sourcefile written by the -meshc option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-c++ Converts file to a C++ header/source file, write it to standard output and exit.
Currently, information about routes are not exported.
See section C/C++/JAVA SOURCE EXPORT for more information.
+c++ prefix
This option is very similar to the -c++ option, but writes a incomplete source
file, which can be concatinated to a sourcefile written by the -c++ option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-3c++ This option is similar to the -c++ option, but surfaces are first triangulated and
then exported as TriangleSet nodes.
This option uses OpenGL commands.
+3c++ prefix
This option is very similar to the -3c++ option, but writes a incomplete source
file, which can be concatinated to a sourcefile written by the -3c++ option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-meshc++
This option is similar to the -c++ option, but surfaces are first converted to a
polygon mesh and then exported as IndexedFaceSet nodes.
+meshc++ prefix
This option is very similar to the -meshc++ option, but writes a incomplete source
file, which can be concatinated to a sourcefile written by the -meshc++ option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-java Converts file to a java source file, write it to standard output and exit.
Currently, information about routes are not exported.
See section C/C++/JAVA SOURCE EXPORT for more information.
+java prefix
This option is very similar to the -java option, but writes a incomplete source
file, which can be concatinated to a sourcefile written by the -java option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-3java This option is similar to the -java option, but surfaces are first triangulated and
then exported as TriangleSet nodes.
This option uses OpenGL commands.
+3java prefix
This option is very similar to the -3java option, but writes a incomplete source
file, which can be concatinated to a sourcefile written by the -3java option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-meshjava
This option is similar to the -java option, but surfaces are first converted to a
polygon mesh and then exported as IndexedFaceSet nodes.
+meshjava prefix
This option is very similar to the -meshjava option, but writes a incomplete source
file, which can be concatinated to a sourcefile written by the -meshjava option.
The names of the new defined datatypes in the sourcefile start with the prefix
argument.
-manyclasses
Only valid after the -java, -3java, -meshjava or -wonderland options.
This option is a brute force attempt to fight against the "too much constants"
problem in java. It may be impossible to compile the output of a normal java based
source code export, cause the current format of java class files are limited to 64K
so called "constants". Not only real constants like 1, 2 or 3 are counted, but also
things like member variable definitions in classes etc.
With the -manyclasses option, all data is distributed into many seperated classes.
The -manyclasses option should help, if you run into the "too much constants"
problem. In case of a large number of DEF commands in the vrml/x3dv file, you can
still run into "too much constants" problem, cause each DEF commands leads to extra
member variable in the main scenegraph class. In this case, you should reduce the
number of DEF commands with the menupoint actions ... rest of scenegraph branch ...
remove ... DEF name
Beside the need to increase the memory limits of the javac compiler (-Xms/-Xmx)
options, you may also need to increase the PermSize memory limits
(-XX:PermSize=/-XX:MaxPermSize=) of the java interpreter.
STEREOVIEWOPTIONS
-nostereo
force non stereoview mode on Linux/UNIX (e.g. if you do not own shutterglases)
-stereo
force stereoview mode.
Stereo is only supported for hardware/software combinations, that allow quadbuffer
stereo ("stereo in a window"), NOT splitscreen stereo (eg. "OpenGlVR").
Examples for hardware/software combinations with support for quadbuffer stereo are
graphicscards with support for shutterglasses or "stereo cloneview" to connect
beamers of a onewall.
-anaglyph glassestype
force expermential stereoview mode for use with colored anaglyph glasses.
glassestype can be red_green, green_red, red_blue or blue_red.
This option uses the OpenGL accumulation buffer. This is not hardware-supported by
a lot of graphics cards/graphics drivers and can result in miserable performance.
-eyedist eyedistinmeter
Distance between the two eyes of the viewer.
Default eyedistinmeter is 0.06, it can be negative to swap eyes (no need to
reconfigure your hardware if eye swapping problems occure).
-screendist screendistinmeter
Distance between the eyes of the viewer and the mid of the monitor screen.
Default screendistinmeter is 0.8.
-fieldofview fieldofviewindegree
Overwrite Field of View field in VRML viewpoints and set to fieldofviewindegree in
degree.
Good stereoviewing may want need to ignore the fieldOfView field of viewpoints. The
fieldOfView of the human eye is about 18 degrees, the VRML default is 45 degrees.
INPUTDEVICEOPTIONS
The following options are only valid, if dune was compiled with matching inputdevice
driver support (e.g. there is not support for a Linux joystick under IRIX).
-joystick joystickdevice
Only valid under Linux or M$Windows.
Under Linux, joystickdevice is the device of a Linux joystick (usually something
like /dev/input/js0 or /dev/js0).
Under M$Windows, the joystickdevice is a number. Depending from the M$Windows
version, this number is either 0, 1 or a number from 0 to 15.
-SDLjoystick joystickdevice
Currently only valid under MacOSX. The joystickdevice is a number (e.g. 0, 1, 2,
...).
-spaceball spaceballdevice
spaceballdevice is the serial device connected to the spaceball (usually something
like /dev/ttyd2 or /dev/ttyS0).
Only valid if binary was compiled with libsball support.
-nxtdials usbdevice
This option support a dials like inputdevice made of mindstorms nxt motors. Just
attach a wheel or gear to each of 3 motors, connect them to the brick and connect
the brick to the computer via USB.
This option is only valid, if white_dune was compiled with support of the libusb
library e.g. available under Linux.
usbdevice is the number of the mindstorms nxt brick connected via USB (0 for the
first nxt brick, 1 for the second nxt brick, etc).
The -nxtdials option automatically set the wheel axisoption.
-xinput xinputname
xinputname is the devicename supported by the Xinput Protocol (usually something
like magellan or dialbox).
Valid on most Unix/X11 implementations.
-xinputlist
Print a list of Xinput devicenames that can be possibly used as xinputname for the
-xinput option and exit.
Valid on most Unix/X11 implementations.
-xinputlistlong
Print a list of Xinput devicenames with axis information and exit.
Valid on most Unix/X11 implementations.
-aflock aflockdevice [ aflockoptions ] -tracker birdaddr -wand birdaddr
aflockdevice is the serial device connected to the Ascension Flock of Birds master
transmitter (usually something like /dev/ttyd2 or /dev/ttyS0).
Dune assumes the following configuration:
Multiple FOBs with single RS232 Interface to Host Computer (see "The flock of
Birds, Installation and Operation Guide, Standalone and Multiple
Transmitter/Multiple Sensors Configurations", Page 3 (chapter "Introduction"),
Figure 2).
birdaddr is the adress of the Bird Unit of the magnetic head tracker (-tracker) or
"3D Mouse" (-wand) in the Fast Bird Bus (FBB adress) as configured with the
dipswitches on the Bird Unit.
This program need to have the Flock of Birds configured in the Normal Address Mode
only (see Page 12, Figure 4 of the manual decribed above).
-headnavigation
Use current transformmode (including rotations) when using a headtracker.
Default without -headnavigation is using only the translation mode. This default
gives you a very natural reaction, when your head moves, the virtual world moves,
but if your head only rotates, the virtual world stand still. With the
headnavigation option, the virtual world reacts to head rotations, depending of the
current transform mode. Be carefull when you use this feature while talking to a
audience. Talking cause small and fast head rotations and will cause small and fast
rotations of the virtual world. Your audience may get a impression like in a
earthquake and is more in danger to get motion sickness.
-sendalways
Tell dune that the device sends (almost) always values. This values will then not
be interpreted automatically as transform commands.
Automatically used for Ascension Flock of Birds device (-aflock).
-dontcarefocus
Inputdevice actions dont care about the window focus.
This can be useful in situations, when you only work with one dune window, e.g.
when using a onewall.
AXISOPTIONS
-x|-y|-z|-xrot|-yrot|-zrot=[-][integer_axisnumber]
[,[factor][,[accel][,[wheel][,ignore]]]]
-all|-allxyz|-allrot=[factor][,[accel][,[wheel][,ignore]]]
-none=integer_axisnumber
-axes=max_number_axes
AXISLEGEND
- used to swap sign of value from axis
integer_axisnumber
Integer with the number of the axis, that should be used for the x y z xrot yrot
zrot directions.
This number may not be greater than the number of axes of the inputdevice.
The integer_axisnumber in the none option is used to disable this axis.
factor Float with a multiplicator for the axes
The factors of the all, allrot and allxyz options are independend of the factors of
the single axes.
accel Float with a expotential accelerator for the axes
wheel The string "wheel" means this axis of the inputdevice will not deliver zero if
released
ignore Float with the value (relative to the maximal value from the device) which will be
ignored (insensitivity)
max_number_axes
Number of used axes, one of (2,3,4,5).
This must be equal or less to the physical available axes of a device. Main usage
of this option is to disable bad designed or mechanical defect axes e.g. when you
wish, this axis on a joystick would not exist
AFLOCKOPTIONS
This options are only valid for the Ascension flock of birds magnetic tracking system.
-baud baudrate
Baudrate of the serial line communicating with the transmitter.
According to the flock of bird manual, the following baudrates are valid for serial
line communication: 2400, 4800, 9600, 19200, 38400, 57600 and 115200.
Default: 38400
-numbirds numberbirds
Number of "data delivering" birds attached to the transmitter (e.g. not counting
the transmitter itself, if it is a Extended Range Controller (ERC)).
Default: 2 (tracker and wand).
-master birdaddr
Adress of the master transmitter in the Fast Bird Bus (FBB adress) as configured
with the dipswitches on the transmitter unit.
Default: 1
-masterIsErc
Used to differ between configurations, where the master is a ERC (Extended Range
Controller) or not. If the master is not a ERC, the FBB adress is the same as the
FBB adress of the tracker or the wand.
Default: not set
-hemisphere FRONT_HEM|AFT_HEM|UPPER_HEM|LOWER_HEM|LEFT_HEM|RIGHT_HEM
Hemisphere used. Sit on the antenna block (with the legs near on the side of the
text) to see, what is left or right 8-)
Default: RIGHT_HEM
-sync 0|1
Synchronise (1) or not (0) data output to a CRT (Monitor) or your host computer.
Synchronisation is used to elimiate magnetic effects of a Monitor using the CRT
sync cable.
Default: 0
-block 0|1
Set (1) or do not set (0) the FNDELAY flag to the filedescriptor of the serial
port.
Default: 0
-filter AC_NARROW | AC_WIDE | DC_FILTER
Enable different filters. Read the Flock of Birds manuals for more information.
This option can be repeated to use multiple filters.
Default: no filter set, using filter set by Flock autoconfiguration.
-suddenchangelock 0|1
Allow (0) or disallow (1) setting of messured position and orientation when a
sudden large messurement occure.
Default: 1
-calfile calibrationfile
Use a VR Juggler style file to calibrate position messurement.
-ignoresize delta
Ignore position jumps from flock bigger than delta. This is much like
suddenchangelock, but pure software based.
Default: 0
MISCOPTIONS
-tessellation integer
Set the default tessellation of NURBS and superformula based parametric shapes to
integer.
The meaning of tessellation decide how many edges are generated in one direction.
A low default tessellation result in faster rendering of related shapes with
tessellation set to 0 inside the white_dune application, but can give a reduced
view, so details of a shape may be hidden.
If no -tessellation option is used, the default tessellation is 32.
-indirect
Forces indirect OpenGL rendering, even when 3D hardware rendering accelleration is
available. In case of possible 3D hardware rendering accelleration this option can
drastically slow down the program.
This option is most usefull on machines with problematic graphic drivers or
halfbaken 3D desktop features like compiz.
-uninstall
Output information (if available) on the commandline, how the white_dune
application can be uninstalled and exit.
Under Micro$oft Windows it additionally clears all information activly set by
white_dune (under HKEY_CURRENT_USER) in the Windows registry.
-psn_???
Only valid under MacOSX.
Options starting with the string "-psn_" are generated by the Aqua desktop under on
some versions of MacOSX and are silently ignored.
-fn font
Only valid under Linux/UNIX/MacOSX.
Set the unix font. Check for valid fonts with the xlsfonts(1) command.
-demomode timeout
This options is intended for running the program as eyecatcher eg. on a fair.
The option is only usefull, if a viewpoint animation is running. In case of input
from the mouse (mouseclick), keyboard or a 3D inputdevice, the animation is stopped
an the user can navigate through the 3D world.
timeout seconds after the last input, the viewpoint animation is not supressed
anymore.
-filedialogdir directory
Change to a specific directory before opening a filedialog.
-proto category protofile
Adds the VRML PROTO in the file protofile to the list of available PROTOs in the
create => proto menu in the category submenu and exit.
-renderslower
This option uses a slower render mode.
--version
Print out version information and exit.
--copyrightdetails
Print out detailed copyright informations and exit.
MOUSE/KEYS
In the 3D view, dune support the following mouse / keyboard commands:
Mouse Button 1 click:
Select objects/3D handlers (e.g. arrows or white boxes) under the cursor (or under
the top of 3D cursor in stereoview)
Mouse Button 2 click:
Additionly select white box 3D handlers under the cursor (or under the top of 3D
cursor in stereoview)
Mouse Button 1 drag:
Drag objects/3D handlers around
CTRL-Mouse Button 1 drag:
Virtual trackball navigation
SHIFT-Mouse Button 1 drag:
Forward/backward navigation
CTRL+SHIFT-Mouse Button 1 drag:
up/down/left/right navigation
ALT-Mouse Button 1 drag: (SGI style)
Virtual trackball navigation
ALT-Mouse Button 2 drag: (SGI style)
up/down/left/right navigation
ALT-Mouse Button 1+2 drag: (SGI style)
forward/backward navigation
Navigation icon pressed-Mouse Button 1 drag:
Virtual trackball navigation
Navigation icon pressed-Mouse Button 2 drag:
forward/backward navigation
Navigation icon-Mouse Button 1+2 drag:
up/down/left/right navigation
In the route view, dune support the following mouse / keyboard commands:
Mouse Button 1 click to event socket of a node and drag to a matching event
socket:
create a ROUTE connection
Mouse Button 1 click to nothing and drag:
cut a ROUTE connection
Mouse Button 1 click to a node and drag:
move node in the route view
Mouse Button 1 click to a node, hold Mouse Button1, pressing Page Up/Down key
move node in the route view by one page (works only on correct motif/lesstif
implementations)
Information about other keyboard usage can be found in the toolbar.
Tips how to use dune can be found in the docs directory of dune
(http://129.69.35.12/dune/docs/)
C/C++/JAVA SOURCE EXPORT
The export to source code is a export of the information (numbers and strings) of the
VRML/X3D scenegraph tree.
White_dune do not export something like C source with OpenGL commands. The exported code
is independend of any rendering engine, but can be used with any 3D API.
Additional code is needed to render the scenegraph with a 3D API. Currently white_dune
comes with only one set of such additinal code for the Java Monkey Engine (JME). This code
can be used as a model for writing code for additional renderengines.
The information of the scenegraph is written into a class/struct with a name concatinated
from the string of the prefix argument (default "X3d") and the string "SceneGraph". The
scenegraph class/struct is filled with references to the different VRML/X3D commands
("nodes"). The name of the type of such a node is concatinated from the string of the
prefix argument (default "X3d") and "Node". Each node type contains the data of the
VRML/X3D node in variables named in the same way as the VRML/X3D fields.
The following table shows the mapping from the VRML/X3D field type to the C, C++ and java
datatypes:
│ │ │
VRML/X3D datatype │ C datatype │ C++ datatype │ java datatype
───────────────────┼──────────────┼──────────────┼────────────────
SFBool │ short │ bool │ boolean
SFInt32 │ int │ int │ int
SFImage │ int* │ int* │ int[]
SFFloat │ float │ float │ float
SFVec2f │ float[2] │ float[2] │ float[2]
SFVec3f │ float[3] │ float[3] │ float[3]
SFVec4f │ float[4] │ float[4] │ float[4]
SFRotation │ float[4] │ float[4] │ float[4]
SFMatrix3f │ float[9] │ float[9] │ float[9]
SFMatrix4f │ float[16] │ float[16] │ float[16]
SFColor │ float[3] │ float[3] │ float[3]
SFColorRGBA │ float[4] │ float[4] │ float[4]
SFDouble │ double │ double │ double
SFVec3d │ double[3] │ double[3] │ double[3]
SFTime │ double │ double │ double
SFString │ const char* │ const char* │ String
SFNode (***) │ X3dNode* │ X3dNode* │ X3dNode
│ │ │
MFBool │ short* │ bool* │ boolean[]
MFInt32 │ int* │ int* │ int[]
MFFloat │ float* │ float* │ float[]
MFVec2f │ float* │ float* │ float[]
MFVec3f │ float* │ float* │ float[]
MFVec4f │ float* │ float* │ float[]
MFRotation │ float* │ float* │ float[]
MFMatrix3f │ float* │ float* │ float[]
MFMatrix4f │ float* │ float* │ float[]
MFColor │ float* │ float* │ float[]
MFColorRGBA │ float* │ float* │ float[]
MFDouble │ double* │ double* │ double[]
MFVec3d │ double* │ double* │ double[]
MFTime │ double* │ double* │ double[]
MFString │ const char** │ const char** │ String[]
MFNode (***) │ X3dNode** │ X3dNode** │ X3dNode[]
(***) The "X3d" part of the name is the default, it can be replaced by the string of the
prefix argument.
For any MF* type field (and a SFImage type field) the number of int, float etc. values in
the array is stored in a variable of the X3dNode struct/class composed from "m_", the name
of the field and "_length" in case of a C/C++ export. Java do not need such a variable,
cause the length of a array is always available as with the .length component of the
array.
The scenegraph is a tree of nodes. The root of the scenegraph is (similar to the
white_dune internals) a VRML/X3D Group node named "root".
In a Group node, the contained nodes are attached via a field named "children" of type
MFNode.
For example imagine the following VRML file:
#VRML V2.0 utf8
Group
{
children
[
Group
{
}
Group
{
}
DEF NAME_OF_FOGNODE Fog
{
color 1 0.50000000 1
}
]
}
If no prefix argument is used, the first node in a VRML/X3D file is represended in the
exported C source as "root->children[0]" in the "X3dSceneGraph" struct.
If the first node in the VRML/X3D file is also a Group node and contain three other nodes,
the third of this nodes is represended as "root->children[0]->children[2]" in the
"X3dSceneGraph" struct.
If the third of this nodes is a Fog node, the "color" field of the Fog node is represended
in the exported C source as "root->children[0]->children[2]->color" in the "X3dSceneGraph"
struct.
The type of the "color" field of the Fog node is SFColor. The SFColor type is represented
as a array of 3 floating point values in the C source, used to store the red, green and
blue part of the color.
So the green part of the fog color is represended in the exported C source as
"root->children[0]->children[2]->color[1]" in the "X3dSceneGraph" struct.
A C++ export would also use "root->children[0]->children[2]->color[1]" in the
"X3dSceneGraph" class.
A java export would similarly use "root.children[0].children[2].color[1]" in the
"X3dSceneGraph" class.
There is a second way to access the fields of the Fog node.
In VRML/X3D it is possible to name nodes with a "DEF" command. The string behind the DEF
command ("NAME_OF_FOGNODE" in the example) also occures in the in the "X3dSceneGraph"
struct and can be directly used to access the matching VRML/X3D data.
So the green part of the fog color is represended in the exported C source as
"NAME_OF_FOGNODE->color[1]" in the "X3dSceneGraph" struct.
A C++ export would also use "NAME_OF_FOGNODE->color[1]" in the "X3dSceneGraph" class.
A java export would use similarly "NAME_OF_FOGNODE.color[1]" in the "X3dSceneGraph" class.
A problem can occure, if the string behind the DEF command is a reserved keyword in the
target language. For example, the 3D modeller wings3d often uses the DEF name "default"
when exporting VRML97 files.
In this case, the DEF name will be renamed (e.g. to "default1") and a warning would be
written to standard error during the export.
Beside the access of node data directly, there are also 2 sets of callbacks to handle the
data of a whole scenegraph (or a branch of it): a set of callbacks to render the content
of the scenegraph branch ("*RenderCallback") and a additional set of callbacks for other
tasks ("*DoWithDataCallback").
There are also callbacks to replace the functions, which per default alltogether traverse
the Scenegraph ("*TreeRenderCallback" and "*TreeDoWithDataCallback").
The callback mechanism and the scenegraph initialization differs from programming language
to programming language.
C:
The scenegraph (default argument "X3d" for prefix) can be declarated with
struct X3dSceneGraph sceneGraph;
and initialized with
X3dSceneGraphInit(&sceneGraph);
A callback function for any X3D node type (like Fog, Text, IndexedFaceSet etc.) has the
declaration
void mycallbackFunction(X3dNode *self, void *data)
To access the fields of the X3D node, you usually cast the X3dNode pointer to a pointer to
the type build from the string of the prefix argument (default "X3d") and the name of the
X3D node type you access with this callback (e.g. X3dFog, X3dText, X3dIndexedFaceSet
etc.).
X3dFog *node = (X3dFog *)self;
X3dText *node = (X3dText *)self;
X3dIndexedFaceSet *node = (X3dIndexedFaceSet *)self;
etc.
With this variable "node" the fields the X3D node can be accessed.
To install the callback, simply assign you function pointer to "callbackFunction" to a
variable build from the string of the prefix argument (default "X3d"), the the name of
the X3D node and the string "RenderCallback" or "DoWithDataCallback". E.g.
X3dFogRenderCallback = mycallbackFunction;
X3dTextDoWithDataCallback = mycallbackFunction;
X3dIndexedFaceSetRenderCallback = mycallbackFunction;
To run the Render or DoWithData functions with the scenegraph tree, just use
X3dGroupTreeDoWithData(&sceneGraph.root, NULL);
Instead of using NULL, other data can be passed to the "data" argument of the callback
functions.
C++:
The callback mechanism is very similar to the C mechanism.
The main difference is the storage of the callback functions. While the callbackfunctions
in C are stored in global space, the C++ callbackfunctions are stored in the static part
of the matching node type.
Instead of using
X3dFogRenderCallback = mycallbackFunction; // C
a C++ program would use
X3dFog dummy;
dummy.renderCallback = &mycallbackFunction; // C++
In C++ there is no need to call a initialization function. A constructor is called when
the
X3dSceneGraph sceneGraph;
declaration is used.
To run the Render or DoWithData functions with the scenegraph tree
"sceneGraph.render(NULL);" or "sceneGraph.doWithData(NULL);" is used.
NULL can be replaced by other data, that will be passed to the "data" argument of the
callback function.
java:
The java callback mechanism is a bit different, it is based on inheritance.
The callback function is part of a class, that extends a matching class:
class MyCallbackClass extends X3dFogRenderCallback {
public void render(X3dNode node) {
The new class is used in the following example:
MyCallbackClass myCallback = new MyCallbackClass();
X3dSceneGraph sceneGraph = new X3dSceneGraph();
X3dText.setX3dTextRenderCallback(myCallback);
sceneGraph.render();
With the the -manyclasses option, the last line changes to "X3dSceneGraph.render();". The
access to a node with a DEF command in the x3dv/vrml file changes also to a static
variable in a similar way.
See the directories docs/export_example_c, docs/export_example_c++ and
docs/export_example_java of the source archive for examples.
EXAMPLES
dune -nostereo
start dune this way, if you have a stereo capable visual, but no shutterglases or
other shutterbased technology.
dune -xinput magellan -allxyz=10,100,,0.0000002 -xinput dialbox-1 -x=0 -y=2 -z=4 -xrot=1
-yrot=3 -zrot=5 -all=1000,,wheel
starts dune with a magellan xinputdevice with factor 10, acceleration 100 and a
ignore value of 0.0000002 on the xyz axes and a dialbox device with
x axis = 0. axis
y axis = 2. axis
z axis = 4. axis
rotation around x axis = 1. axis
rotation around y axis = 3. axis
rotation around y axis = 5. axis
all axes use factor 1000 and all to not deliver zero if released
dune -joystick /dev/input/js0 -z=,3 -axes=3
starts dune with a linux joystick, set acceleration of the z axis to 3 and disables
the 4. (5., 6., ...) axis.
dune -xinput magellan -z=3 -xrot=2 -none=2
starts dune with a xinput/magellan device, swapping axis number 2 and axis number
3, with axis number 2 disabled.
dune -nxtdials
starts dune with a mindstorms nxt usb device, all axes are automatic handled as
wheels.
dune -aflock /dev/ttyS1 -numbirds 2 -master 1 -wand 2 -tracker 3
starts dune with a Ascension Flock of Birds. Master transmitter (a Extended Range
Controller (ERC)) at FBB adress 1 is connected to the serial device /dev/ttyS1, use
2 Birds, one attached to a "3D Mouse" device at FBB adress 2 and one attached to a
head tracking device at FBB adress 3.
dune -wonderland wonderland/modules -manyclasses Test.x3dv
Exports the content of Test.x3dv as java source for wonderland 0.5 to the directory
wonderland/modules/exportX3dv/test.
To compile the java source to a wonderland module
wonderland/modules/exportX3dv/test/dist/test.jar change the directory to
wonderland/modules/exportX3dv/test and use ant.
FILES
$HOME/.dunerc
default file to load/store settings
(see DUNERC environment variable for more information)
$HOME/.dune_crash_*_*.wrl
stores the vrml file in case of a crash
ENVIRONMENT
DUNERC filename to load/store details of dunes screen layout and
settings of the "options" menupoint.
If this filename is not writable, settings are only loaded, not stored.
If DUNERC is not set, the file $HOME/.dunerc is used under Linux/UNIX/MacOSX or the
registry under Micro$oft Windows.
DUNEDOCS path to documentation directory
LANG the first two characters of then environment variable LANG
are compared to the ISO 3166 country shortcut of the supported languages. For
example, if LANG is set to de_DE, german menu, dialogs and errormessages are used.
COPYRIGHT
Dune, graphical vrml97 editor and animation tool
Copyright (C) 2000-2002 Stephen F. White and others
This program is free software; you can redistribute it
and/or modify it under the terms of the
GNU General Public License
as published by the Free Software Foundation; either
version 2 of the License, or (at your option) any later
version.
BUGS
Dune need valid vrml97/x3dv code to work, it can not load a invalid VRML97/X3DV file.
White_dune can load XML encoded X3D files via a translator.
Use the menupoint Options -> Input Settings... to configure a X3D/XML to X3DV translator.
dune is software in development, it is not 100% free of bugs. Unsucessful crashes should
be rare, lucky crashes allow to get back the data. (see "EXIT STATUS").
Currently not all VRML97/X3D nodes are displayed (e.g. MovieTexture, NurbsSweptSurface or
NurbsSwungSurface) or displayed correctly (e.g. Text or Viewpoint).
Please send bugmessages to the old dune bugtracker sourceforge page ⟨http://
sourceforge.net/tracker/?group_id=3356&atid=103356⟩
DIAGNOSTICS
Exit status is 0 for sucessfull operation.
Exit status is 1 if inputfile can not be sucessfully read or other initialisation error.
Exit status is 2 in case of a X11 server crash.
Exit status is 11 in case of a X11 initialisation error.
Exit status is 97 in case one of the inputfiles is a VRML 1 file (the VRML 1 format is not
supported).
In case of a coredump/crash, the exit status can be undefined.
EXIT STATUS
In case of a crash (e.g. X11 server crash or signal (coredump) in case of a internal
error), dune tries to write it's contence to the file $HOME/.dune_crash_*_*.wrl
SEE ALSO
illegal2vrml(1), javac(1), java(1), Xvfb(1), xterm(1), v2x3d(1), x3dv2(1), FreeWRL(1),
lookat(1), cc3dglut(1), xj3d(1), cosmoplayer(1), cosmoworlds(1),
ISO/IEC 14772
⟨http://www.web3d.org/x3d/specifications/vrml/⟩
ISO/IEC 19776-2
⟨http://www.web3d.org/specifications/⟩
NIST vrml97/x3d translators
⟨http://ovrt.nist.gov/v2_x3d.html⟩
AUTHORS
Stephen F. White and others
See README file for details