NAME

       esreverse - reverse an es stream

SYNOPSIS

       esreverse [switches] <infile> <outfile>

DESCRIPTION

              TS tools version 1.11, esreverse built Nov 11 2008 17:15:47

              Output  a  reversed  stream  derived  from  the  input  H.264 (MPEG-4/AVC) or H.262
              (MPEG-2) elementary stream.

              If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66)
              and video PID (0x68) are used.

   Files:
       <infile>
              is the input elementary stream.

              <outfile> is the output stream, either an equivalent elementary

              stream, or an H.222 Transport Stream (but see -stdout and -host below).

   Switches:
       -verbose, -v
              Output additional (debugging) messages

       -quiet, -q
              Only output error messages

       -stdout
              Write output to <stdout>, instead of a named file Forces -quiet.

       -host <host>, -host <host>:<port>
              Writes  output  (over  TCP/IP)  to the named <host>, instead of to a named file. If
              <port> is not specified, it defaults to 88. Implies -tsout.

       -max <n>, -m <n>
              Maximum number of frames to read

       -freq <n>
              Specify the frequency of frames to try to keep when reversing. Defaults to 8.

       -tsout Output H.222 Transport Stream

       -pes, -ts
              The input file is TS or PS, to be read via the PES->ES reading mechanisms

       -server
              Also output as normal forward video as reversal data is  being  collected.  Implies
              -pes and -tsout.

       -x     Temporary extra debugging information

   Stream type:
              If  input  is  from  a file, then the program will look at the start of the file to
              determine if the stream is H.264 or H.262 data. This process may occasionally  come
              to  the  wrong conclusion, in which case the user can override the choice using the
              following switches.

       -h264, -avc
              Force the program to treat the input as MPEG-4/AVC.

       -h262  Force the program to treat the input as MPEG-2.

              TS tools version 1.11, esreverse built Nov 11 2008 17:15:47

              Output a reversed stream  derived  from  the  input  H.264  (MPEG-4/AVC)  or  H.262
              (MPEG-2) elementary stream.

              If output is to an H.222 Transport Stream, then fixed values for the PMT PID (0x66)
              and video PID (0x68) are used.

   Files:
       <infile>
              is the input elementary stream.

              <outfile> is the output stream, either an equivalent elementary

              stream, or an H.222 Transport Stream (but see -stdout and -host below).

   Switches:
       -verbose, -v
              Output additional (debugging) messages

       -quiet, -q
              Only output error messages

       -stdout
              Write output to <stdout>, instead of a named file Forces -quiet.

       -host <host>, -host <host>:<port>
              Writes output (over TCP/IP) to the named <host>, instead of to  a  named  file.  If
              <port> is not specified, it defaults to 88. Implies -tsout.

       -max <n>, -m <n>
              Maximum number of frames to read

       -freq <n>
              Specify the frequency of frames to try to keep when reversing. Defaults to 8.

       -tsout Output H.222 Transport Stream

       -pes, -ts
              The input file is TS or PS, to be read via the PES->ES reading mechanisms

       -server
              Also  output  as  normal forward video as reversal data is being collected. Implies
              -pes and -tsout.

       -x     Temporary extra debugging information

   Stream type:
              If input is from a file, then the program will look at the start  of  the  file  to
              determine  if the stream is H.264 or H.262 data. This process may occasionally come
              to the wrong conclusion, in which case the user can override the choice  using  the
              following switches.

       -h264, -avc
              Force the program to treat the input as MPEG-4/AVC.

       -h262  Force the program to treat the input as MPEG-2.

SEE ALSO

       The  full  documentation  for  esreverse  is maintained as a Texinfo manual.  Please check
       http://tstools.berlios.de for more information.