NAME

       foo2hiperc - Convert Ghostscript pbmraw or bitcmyk format into a HIPERC printer stream

SYNOPSIS

       foo2hiperc [options] <pbmraw-file >hiperc-file

       foo2hiperc [options] <bitcmyk-file >hiperc-file

       foo2hiperc [options] <pksmraw-file >hiperc-file

DESCRIPTION

       foo2hiperc  converts  Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome
       or color HIPERC streams, for driving the Oki C310dn, C3100, C3200, C3300n, C3400n, C5100n,
       C5500n, C5600n, and the C5800n HIPERC printers.

COMMAND LINE OPTIONS

   Normal Options
       These  are  the  options  used  to  select  the parameters of a print job that are usually
       controlled on a per job basis.

       -c     Force color mode if autodetect doesn't work.

       -d duplex
              Duplex code to send to printer [1].
              │        │               │
              │1   off │ 2   long edge │ 3   short edge

       -g xpixxypix
              Set page dimensions in pixels [5100x6600].

       -m media
              Media code to send to printer [0].

              ──────────────────────────
              Media          HIPERC
              ──────────────────────────
              plain            0
              labels           1
              transparency     2

       -p paper
              Paper code to send to printer [2].

              ┌─────────────┬─────────────────────┐
              │ 1   A4      │  2   letter         │
              │ 3   legal   │ -    -              │
              │ 5   A5      │  6   B5jis          │
              │ 7   A6      │  8   env Monarch    │
              │ 9   env DL  │ 10   env C5         │
              │11   env #10 │ 12   executive      │
              │13   env #9  │ 14   legal 13.5"    │
              │15   A3      │ 16   tabloid/ledger │
              └─────────────┴─────────────────────┘
       -n copies
              Number of copies [1].

       -r xresxyres
              Set device resolution in pixels/inch [600x600].

       -s source
              Source (InputSlot) code to send to printer [0].
              │                │
              │0   auto select │
              │1   tray1       │ 2   tray2
              │3   multi       │ 4   manual

       -t     Draft mode.  Every other pixel is white.

       -J filename
              Filename string to send to printer.

       -U username
              Username string to send to printer.

   Printer Tweaking Options
       These are the options used to customize the  operation  of  foo2hiperc  for  a  particular
       printer.

       -u xoffxyoff
              Set  the offset of the start of the printable region from the upper left corner, in
              pixels [0x0].

       -l xoffxyoff
              Set the offset of the end of the printable region from the lower right  corner,  in
              pixels [0x0].

       -L mask
              Send logical clipping amounts implied by -u/-l in the HIPERC stream [3].

              0   don't send any logical clipping amounts
              1   only send Y clipping amount
              2   only send X clipping amount
              3   send both X and Y clipping amounts

       -A     AllIsBlack: convert C=1,M=1,Y=1 to just K=1.  Works with bitcmyk input only.

       -B     BlackClears: K=1 forces C,M,Y to 0.  Works with bitcmyk input only.

       -Z compressed
              Use uncompressed (0) or compressed (1) JBIG data.

   Debugging Options
       These options are used for debugging foo2hiperc.

       -S plane
              Output  just  a  single  color  plane  from a color print and print it on the black
              plane.  The default is to output all color planes.

              1   Cyan
              2   Magenta
              3   Yellow
              4   Black

       -D level
              Set Debug level [0].

EXAMPLES

       Create a black and white HIPERC stream:

              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
                  -sPAPERSIZE=letter -r600x600 -sDEVICE=pbmraw
                  -sOutputFile=- - < testpage.ps
              | foo2hiperc -r600x600 -g5100x6600 -p0 >testpage.zm

       Create a color HIPERC stream:

              gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
                  -sPAPERSIZE=letter -g5100x6600 -r600x600 -sDEVICE=bitcmyk
                  -sOutputFile=- - < testpage.ps
              | foo2hiperc -r600x600 -g5100x6600 -p0 >testpage.zc

FILES

       /usr/bin/foo2hiperc

SEE ALSO

       foo2hiperc-wrapper(1), hipercdecode(1)

AUTHOR

       Rick Richardson <rick.richardson@comcast.com>
       http://foo2hiperc.rkkda.com/