Provided by: gromacs-data_4.6.5-1build1_all 
NAME
g_wham - weighted histogram analysis after umbrella sampling
VERSION 4.6.5
SYNOPSIS
g_wham -ix pullx-files.dat -if pullf-files.dat -it tpr-files.dat -ip pdo-files.dat -o profile.xvg -hist
histo.xvg -oiact iact.xvg -iiact iact-in.dat -bsres bsResult.xvg -bsprof bsProfs.xvg -tab umb-pot.dat
-[no]h -[no]version -nice int -xvg enum -min real -max real -[no]auto -bins int -temp real -tol real
-[no]v -b real -e real -dt real -[no]histonly -[no]boundsonly -[no]log -unit enum -zprof0 real -[no]cycl
-[no]sym -[no]ac -acsig real -ac-trestart real -nBootstrap int -bs-method enum -bs-tau real -bs-seed int
-histbs-block int -[no]vbs
DESCRIPTION
This is an analysis program that implements the Weighted Histogram Analysis Method (WHAM). It is intended
to analyze output files generated by umbrella sampling simulations to compute a potential of mean force
(PMF).
At present, three input modes are supported.
* With option -it, the user provides a file which contains the file names of the umbrella simulation
run-input files ( .tpr files), AND, with option -ix, a file which contains file names of the pullx
mdrun output files. The .tpr and pullx files must be in corresponding order, i.e. the first .tpr
created the first pullx, etc.
* Same as the previous input mode, except that the the user provides the pull force output file names (
pullf.xvg) with option -if. From the pull force the position in the umbrella potential is computed.
This does not work with tabulated umbrella potentials.
* With option -ip, the user provides file names of (gzipped) .pdo files, i.e. the GROMACS 3.3
umbrella output files. If you have some unusual reaction coordinate you may also generate your own .pdo
files and feed them with the -ip option into to g_wham. The .pdo file header must be similar to the
following:
UMBRELLA 3.0
Component selection: 0 0 1
nSkip 1
Ref. Group 'TestAtom'
Nr. of pull groups 2
Group 1 'GR1' Umb. Pos. 5.0 Umb. Cons. 1000.0
Group 2 'GR2' Umb. Pos. 2.0 Umb. Cons. 500.0
The number of pull groups, umbrella positions, force constants, and names may (of course) differ.
Following the header, a time column and a data column for each pull group follows (i.e. the displacement
with respect to the umbrella center). Up to four pull groups are possible per .pdo file at present.
By default, the output files are
-o PMF output file
-hist Histograms output file
Always check whether the histograms sufficiently overlap.
The umbrella potential is assumed to be harmonic and the force constants are read from the .tpr or .pdo
files. If a non-harmonic umbrella force was applied a tabulated potential can be provided with -tab.
WHAM OPTIONS ------------
-bins Number of bins used in analysis
-temp Temperature in the simulations
-tol Stop iteration if profile (probability) changed less than tolerance
-auto Automatic determination of boundaries
-min,-max Boundaries of the profile
The data points that are used to compute the profile can be restricted with options -b, -e, and -dt.
Adjust -b to ensure sufficient equilibration in each umbrella window.
With -log (default) the profile is written in energy units, otherwise (with -nolog) as probability. The
unit can be specified with -unit. With energy output, the energy in the first bin is defined to be
zero. If you want the free energy at a different position to be zero, set -zprof0 (useful with
bootstrapping, see below).
For cyclic or periodic reaction coordinates (dihedral angle, channel PMF without osmotic gradient), the
option -cycl is useful. g_wham will make use of the periodicity of the system and generate a periodic
PMF. The first and the last bin of the reaction coordinate will assumed be be neighbors.
Option -sym symmetrizes the profile around z=0 before output, which may be useful for, e.g. membranes.
AUTOCORRELATIONS ----------------
With -ac, g_wham estimates the integrated autocorrelation time (IACT) tau for each umbrella window and
weights the respective window with 1/[1+2*tau/dt]. The IACTs are written to the file defined with
-oiact. In verbose mode, all autocorrelation functions (ACFs) are written to hist_autocorr.xvg. Because
the IACTs can be severely underestimated in case of limited sampling, option -acsig allows one to smooth
the IACTs along the reaction coordinate with a Gaussian (sigma provided with -acsig, see output in
iact.xvg). Note that the IACTs are estimated by simple integration of the ACFs while the ACFs are larger
0.05. If you prefer to compute the IACTs by a more sophisticated (but possibly less robust) method such
as fitting to a double exponential, you can compute the IACTs with g_analyze and provide them to g_wham
with the file iact-in.dat (option -iiact), which should contain one line per input file ( .pdo or
pullx/f file) and one column per pull group in the respective file.
ERROR ANALYSIS --------------
Statistical errors may be estimated with bootstrap analysis. Use it with care, otherwise the statistical
error may be substantially underestimated. More background and examples for the bootstrap technique can
be found in Hub, de Groot and Van der Spoel, JCTC (2010) 6: 3713-3720.
-nBootstrap defines the number of bootstraps (use, e.g., 100). Four bootstrapping methods are supported
and selected with -bs-method.
(1) b-hist Default: complete histograms are considered as independent data points, and the bootstrap
is carried out by assigning random weights to the histograms ("Bayesian bootstrap"). Note that each point
along the reaction coordinate must be covered by multiple independent histograms (e.g. 10 histograms),
otherwise the statistical error is underestimated.
(2) hist Complete histograms are considered as independent data points. For each bootstrap, N
histograms are randomly chosen from the N given histograms (allowing duplication, i.e. sampling with
replacement). To avoid gaps without data along the reaction coordinate blocks of histograms (
-histbs-block) may be defined. In that case, the given histograms are divided into blocks and only
histograms within each block are mixed. Note that the histograms within each block must be representative
for all possible histograms, otherwise the statistical error is underestimated.
(3) traj The given histograms are used to generate new random trajectories, such that the generated
data points are distributed according the given histograms and properly autocorrelated. The
autocorrelation time (ACT) for each window must be known, so use -ac or provide the ACT with -iiact. If
the ACT of all windows are identical (and known), you can also provide them with -bs-tau. Note that
this method may severely underestimate the error in case of limited sampling, that is if individual
histograms do not represent the complete phase space at the respective positions.
(4) traj-gauss The same as method traj, but the trajectories are not bootstrapped from the umbrella
histograms but from Gaussians with the average and width of the umbrella histograms. That method yields
similar error estimates like method traj.
Bootstrapping output:
-bsres Average profile and standard deviations
-bsprof All bootstrapping profiles
With -vbs (verbose bootstrapping), the histograms of each bootstrap are written, and, with bootstrap
method traj, the cumulative distribution functions of the histograms.
FILES
-ix pullx-files.dat Input, Opt.
Generic data file
-if pullf-files.dat Input, Opt.
Generic data file
-it tpr-files.dat Input, Opt.
Generic data file
-ip pdo-files.dat Input, Opt.
Generic data file
-o profile.xvg Output
xvgr/xmgr file
-hist histo.xvg Output
xvgr/xmgr file
-oiact iact.xvg Output, Opt.
xvgr/xmgr file
-iiact iact-in.dat Input, Opt.
Generic data file
-bsres bsResult.xvg Output, Opt.
xvgr/xmgr file
-bsprof bsProfs.xvg Output, Opt.
xvgr/xmgr file
-tab umb-pot.dat Input, Opt.
Generic data file
OTHER OPTIONS
-[no]hno
Print help info and quit
-[no]versionno
Print version info and quit
-nice int 19
Set the nicelevel
-xvg enum xmgrace
xvg plot formatting: xmgrace, xmgr or none
-min real 0
Minimum coordinate in profile
-max real 0
Maximum coordinate in profile
-[no]autoyes
Determine min and max automatically
-bins int 200
Number of bins in profile
-temp real 298
Temperature
-tol real 1e-06
Tolerance
-[no]vno
Verbose mode
-b real 50
First time to analyse (ps)
-e real 1e+20
Last time to analyse (ps)
-dt real 0
Analyse only every dt ps
-[no]histonlyno
Write histograms and exit
-[no]boundsonlyno
Determine min and max and exit (with -auto)
-[no]logyes
Calculate the log of the profile before printing
-unit enum kJ
Energy unit in case of log output: kJ, kCal or kT
-zprof0 real 0
Define profile to 0.0 at this position (with -log)
-[no]cyclno
Create cyclic/periodic profile. Assumes min and max are the same point.
-[no]symno
Symmetrize profile around z=0
-[no]acno
Calculate integrated autocorrelation times and use in wham
-acsig real 0
Smooth autocorrelation times along reaction coordinate with Gaussian of this sigma
-ac-trestart real 1
When computing autocorrelation functions, restart computing every .. (ps)
-nBootstrap int 0
nr of bootstraps to estimate statistical uncertainty (e.g., 200)
-bs-method enum b-hist
Bootstrap method: b-hist, hist, traj or traj-gauss
-bs-tau real 0
Autocorrelation time (ACT) assumed for all histograms. Use option -ac if ACT is unknown.
-bs-seed int -1
Seed for bootstrapping. (-1 = use time)
-histbs-block int 8
When mixing histograms only mix within blocks of -histbs-block.
-[no]vbsno
Verbose bootstrapping. Print the CDFs and a histogram file for each bootstrap.
SEE ALSO
gromacs(7)
More information about GROMACS is available at <http://www.gromacs.org/>.
Mon 2 Dec 2013 g_wham(1)