Provided by: gpivtools_0.6.0-3build1_amd64
NAME
gpiv_trig - triggers a (double Nd_YAGG) laser with a CCD camera.
SYNOPSIS
gpiv_trig [-h | --help] [-i | --interactive] [-v | --version] [-V | --verbose]
DESCRIPTION
gpiv_trig triggers a CCD camera and a (double Nd_YAGG) laser for Particle Image velocimetry (PIV). The code uses a kernel module gpivtrig_rtl from the gpivtrig package that depends on the Real Time Application Interface (RTAI) and RealtimeLinux. Trigger pulses are send to the parallel port of the PC (/dev/lpt0 or /dev/lpt1; see the configure script of the gpivtrig package) at bins #1 (camera), #2 and #3 (first and second laser respectively). The program may be started directly if all modules have been loaded or by the gpiv_control script, also included in the gpivtrig package, which takes care of the loading and unloading of the needed kernel modules. Currently, gpiv_trig is tested with RTAI-3.1 and the linux kernel-2.4.27. This program uses the TRIG parameters. The command line options are explained below.
Options
-h | --help On-line help. -i | --interactive Prompt for confirmation. -v | --version Print version information on standard output, then exit successfully. -V | --verbose program behaves more verbose during operation showing what is going on
SEE ALSO
gpivtools(1), gpiv_control(1), gpiv(1)
AUTHOR
Gerber Van der Graaf 19 Januari 2005 GPIV_TRIG(1)