Provided by: user-mode-linux_3.13.0-1um-0ubuntu1_amd64 
NAME
linux — User-mode Linux
SYNOPSIS
linux [options ...]
DESCRIPTION
This manual page briefly documents User-mode Linux.
This manual page was written for the Debian GNU/Linux distribution because the original program does not
have a manual page. Check linux --help for an up-to-date synopsis.
OPTIONS
mem=memory
This controls how much "physical" memory the kernel allocates for the system. The size is
specified as a number followed by one of 'k', 'K', 'm', 'M', which have the obvious meanings.
This is not related to the amount of memory in the physical machine. It can be more, and the
excess, if it's ever used, will just be swapped out.
iomem=name,file
Configure file as a named IO memory region named name.
gdb-pid=pid
gdb-pid is used to attach an external debugger to UML. This may be an already-running gdb or a
debugger-like process like strace.
debugtrace
Causes the tracing thread to pause until it is attached by a debugger and continued. This is
mostly for debugging crashes early during boot, and should be pretty much obsoleted by the
debug switch.
honeypot This makes UML put process stacks in the same location as they are on the host, allowing
exploits such as stack smashes to work against UML.
debug Starts up the kernel under the control of gdb. See the kernel debugging tutorial and the
debugging session pages in the user-mode-linux-doc package for more information.
root=file This is actually used by the generic kernel in exactly the same way as in any other kernel. If
you configure a number of block devices and want to boot off something other than ubd0, you
would use something like "root=/dev/ubd5". Another notation is the use of the major and the
minor number of the device, i.e. root=98:0, for ubd0.
To use hostfs for the root filesystem, use the syntax "root=/dev/root rootflags=/
rootfstype=hostfs"
umid=name This is used to assign a unique identity to this UML machine This is used for naming the pid
file and management console socket. I.e. to access to the management console for an already
running image (i.e. umid=test), just launch uml_mconsole test from the host command line.
uml_dir=directory
The location to place the pid and umid files.
initrd=file
This is used to boot UML from an initrd image. The argument is the name of the file containing
the image.
jail Enables the protection of kernel memory from processes
con[0-9]*=description
Attach a console to a host channel. Examples of channels include ttys, ptys, pts terminals,
xterms, and file descriptors.
tty This will make UML attach the device to the specified tty. If the tty that you
specify is the slave end of a tty/pty pair, something else must have already opened
the corresponding pty in order for this to work.
con1=tty:/dev/tty3
pty This will cause UML to allocate a free host pty for the device. The pty will be
announced in the boot log. You would attach to it via the corresponding tty.
con1=pty
pts terminal
This is similar to pty above, but the specified UML device will be attached to a free
pts device on the host. Look at the boot log to see which one.
con1=pts
xterm UML will run an xterm and the device will be attached to it.
con1=xterm
file descriptors
If you set up a file descriptor on the UML command line, you can attach a UML device
to it. This is most commonly used to put the main console back on stdin and stdout
after assigning all the other consoles to something else.
con0=fd:0,fd:1 con=xterm
You can also specify different input and output channels for a device by putting a comma
between them:
ssl3=tty:/dev/tty2,xterm
See Setting up Serial Lines and Consoles (link to URL file:///usr/share/doc/user-mode-linux-
doc/html/input.html) for a more information.
ssl[0-9]*=description
Attach a serial line to a host channel. The same options are supported as for consoles,
described above.
fake_ide Create ide0 entries that map onto ubd devices.
ubd[0-7][r][s]=file
ubd0r=/tmp/debian-woody.ext2
ubd0rs=/tmp/debian-woody.ext2
ubd0=/tmp/chroot
This is used to associate a device with a file or in the underlying filesystem. Usually, there
is a filesystem in the file, but that's not required. Swap devices containing swap files can
be specified like this. Also, a file which doesn't contain a filesystem can have its contents
read in the virtual machine by running dd on the device. Appending an 'r' will cause that
device to be mounted read-only. Appending an 's' tells UML to open the file using O_SYNC
(synchronous I/O).
The ubd option can no longer be used to specify a hostfs root filesystem. See the "root"
option for a more correct method.
udb This option is here solely to catch ubd -> udb typos, which can be to impossible to catch
visually unless you specifically look for them. The only result of any option starting with
'udb' is an error in the boot output.
fakehd Change the ubd device name to "hd", allowing programs within UML to access UBD devices as if
they were normal IDE disks.
eth[0-9]+=transport,options
Configure a network device. Formats and examples follow (one for each configured transport).
eth[0-9]+=ethertap,device,ethernet_address,tap_ip_address
eth0=ethertap,tap0,,192.168.0.1
eth[0-9]+=tuntap,,ethernet_address,ip_address
eth0=tuntap,,fe:fd:0:0:0:1,192.168.0.1
eth[0-9]+=daemon,ethernet_address,type,control_socket,data_socket
eth0=daemon,,unix,/var/run/uml-utilities/uml_switch.ctl
eth[0-9]+=slip,slip_ip
eth0=slip,192.168.0.1
eth[0-9]+=mcast,ethernet_address,address,port,ttl
eth0=mcast,,224.2.3.4:5555,3
mode=tt When both CONFIG_MODE_TT and CONFIG_MODE_SKAS are enabled, this option forces UML to run in tt
(tracing thread) mode. It is not the default because it's slower and less secure than skas
mode.
mode=skas0
Disables SKAS3 usage, so that SKAS0 is used, unless you specify mode=tt. Note that this was
recently added - on older kernels you must use simply "skas0".
skas0 Disables SKAS3 usage, so that SKAS0 is used, unless you specify mode=tt.
mconsole=notify:socket
Requests that the mconsole driver send a message to the named Unix socket containing the name
of the mconsole socket. This also serves to notify outside processes when UML has booted far
enough to respond to mconsole requests.
aio=2.4 This is used to force UML to use 2.4-style AIO even when 2.6 AIO is available. 2.4 AIO is a
single thread that handles one request at a time, synchronously. 2.6 AIO is a thread which
uses the 2.6 AIO interface to handle an arbitrary number of pending requests. 2.6 AIO is not
available in tt mode, on 2.4 hosts, or when UML is built with /usr/include/linux/aio_abi.h not
available. Many distributions don't include aio_abi.h, so you will need to copy it from a
kernel tree to your /usr/include/linux in order to build an AIO-capable UML.
hostfs=rootdir,flags
This is used to set hostfs parameters. The root directory argument is used to confine all
hostfs mounts to within the specified directory tree on the host. If this isn't specified,
then a user inside UML can mount anything on the host that's accessible to the user that's
running it. The only flag currently supported is 'append', which specifies that all files
opened by hostfs will be opened in append mode.
xterm=terminal emulator,title switch,exec switch
Specifies an alternate terminal emulator to use for the debugger, consoles, and serial lines
when they are attached to the xterm channel. The values are the terminal emulator binary, the
switch it uses to set its title, and the switch it uses to execute a subprocess, respectively.
The title switch must have the form exec switch must have the form '<switch> command arg1 arg2
The default values are 'xterm=xterm,-T,-e'. Values for gnome-terminal are 'xterm=gnome-
terminal,-t,-x'.
noptraceldt
Turns off usage of PTRACE_LDT, even if host supports it. To support PTRACE_LDT, the host needs
to be patched using the current skas3 patch.
noptracefaultinfo
Turns off usage of PTRACE_FAULTINFO, even if host supports it. To support PTRACE_FAULTINFO, the
host needs to be patched using the current skas3 patch.
noprocmm Turns off usage of /proc/mm, even if host supports it. To support /proc/mm, the host needs to
be patched using the current skas3 patch.
nosysemu Turns off syscall emulation patch for ptrace (SYSEMU) on. SYSEMU is a performance-patch
introduced by Laurent Vivier. It changes behaviour of ptrace() and helps reducing host context
switch rate. To make it working, you need a kernel patch for your host, too. See
http://perso.wanadoo.fr/laurent.vivier/UML/ for further information.
--help Prints syntax information.
--version Prints the version number of the kernel.
--showconfig
Prints the configuration used to build the kernel. To print all the options used to build the
"linux" uml kernel and save them in "config_file" you can use
linux --showconfig > config_file
SEE ALSO
The UserModeLinux-HOWTO (link to URL file:///usr/share/doc/user-mode-linux-doc/html/UserModeLinux-
HOWTO.html)
AUTHOR
User-mode Linux was written by Jeff Dike and others.
This manual page was written by Matt Zimmerman mdz@debian.org for the Debian GNU/Linux system, based on
linux --help and the user-mode-linux website.
LINUX(1)