Provided by: mikmod_3.2.1-4_amd64 
NAME
mikmod - play soundtracker etc. modules on a Unix machine.
SYNOPSIS
mikmod [-options]... [module|playlist]...
DESCRIPTION
MikMod is a very portable module player based on libmikmod, written originally by Jean-Paul Mikkers
(MikMak). It will play the IT, XM, MOD, MTM, S3M, STM, ULT, FAR, MED, DSM, AMF, IMF and 669 module
formats. It works under AIX, FreeBSD, HP-UX, IRIX, Linux, NetBSD, OpenBSD, OSF/1, SunOS, Solaris and
OS/2. It is controllable via an easy-to-use curses interface and will extract and play modules from a
variety of different archive formats.
OPTIONS
Options can be given in any order, and are case-sensitive. For the options which have both a short and a
long form, the long form can be prefixed by one or two dashes. Note that the settings in your
$HOME/.mikmodrc will override the defaults shown in this man page.
OUTPUT OPTIONS
-d, --driver n
Use the specified device driver for output, 0 is autodetect. The default is 0. If your installed
libmikmod engine is recent enough (>=3.1.7), you can also specify the driver with an alias, as
well as driver options separated by commas. The list and driver aliases and recognized options can
be found in libmikmod's documentation.
-o, --output 8m|8s|16m|16s
Output settings, 8 or 16 bit in stereo or mono. The default is "16s".
-f, --frequency freq
Set mixing frequency in hertz. The default is 44100.
-i, --interpolate
Use interpolated mixing. This will generally improve audio quality, at the expense of a bit more
CPU usage. Note that this option alters the behaviour of software drivers only ; hardware drivers
are not affected.
--nointerpolate
Do not use interpolated mixing (default).
--hqmixer
Use high quality software mixer. This improves audio quality, but requires a lot more CPU power.
Note that this option alters the behaviour of software drivers only ; hardware drivers are not
affected.
--nohqmixer
Do not use high quality software mixer (default).
--surround
Use surround mixing.
--nosurround
Do not use surround mixing (default).
-r, --reverb n
Sets reverb amount from 0 (no reverb) to 15 (max reverb). The default is 0 (no reverb).
PLAYBACK OPTIONS
-v, --volume volume
Set volume from 0% (silence) to 100%. The default is 100%.
-F, --fadeout
Fade out the volume during the last pattern of each module.
--nofadeout
Do not fade out the volume during the last pattern of each module (default).
-l, --loops
Enable in-module backwards loops.
--noloops
Disable in-module backwards loops (default).
-a, --panning
Process panning effects (default). This should be disabled (using --nopanning) for very old demo
modules which use the panning effects for synchronization purposes.
--nopanning
Do not process panning effects.
-x, --protracker
Enable protracker extended speed effect (default). This should be disabled (using --noprotracker)
for very old demo modules which use the extended speed effect for synchronization purposes.
--noprotracker
Disable protracker extended speed effect.
-X, --exitafter
Exit MikMod upon playlist completion. If there is nothing in the playlist, MikMod will not exit.
Can be disabled with --noexitafter.
--noexitafter
Do not exit MikMod upon playlist completion.
LOADING OPTIONS
-c, --curious
Look for hidden patterns in module. Most modules don't have hidden patterns, but you can find
"bonus" patterns (or just silence) in some modules.
--nocurious
Do not look for hidden patterns in module (default).
-p, --playmode n
Playlist mode. The possible values here are 1, to loop the current module; 2, to loop the whole
playlist; 4, to shuffle the playlist; and 8, to walk the playlist in random order. These values
can be added; 0 plays the whole playlist once. The default is 2, depending on your mikmod
configuration.
-t, --tolerant
Don't halt MikMod if a module cannot be read or is an unknown format.
--notolerant
Halt MikMod if a module cannot be read or is an unknown format (default).
SCHEDULING OPTIONS
The following options need root privileges (or a setuid root binary), and don't work under all systems.
-s, --renice
Renice to -20 if possible to gain more CPU priority. This option is only available under FreeBSD,
Linux, NetBSD, OpenBSD and OS/2.
--norenice
Do not renice to -20 (default).
-S, --realtime
Reschedule mikmod to gain real-time priority (and thus more CPU time). DANGEROUS! USE WITH
CAUTION! This option is only available under FreeBSD, Linux and OS/2.
--norealtime
Do not reschedule MikMod to gain real-time priority (default).
DISPLAY OPTIONS
-q, --quiet
Quiet mode. Disables interactive commands and displays only errors.
--terse
Terse display like MikMod 2, i.e. without the information panels.
-C, --color
Enable colors in interface (default).
--nocolor
Disable colors in interface.
INFORMATION OPTIONS
-n, --information
Display the list of the known drivers and module loaders.
-V, --version
Display MikMod version.
-h, --help
Display a summary of the options.
CONFIGURATION OPTION
--norc Do not parse the $HOME/.mikmodrc configuration file. This file contains your default settings, so
that you don't have to specify them each time you run MikMod. The file is read when you run MikMod
and updated on exit. Using this option prevents MikMod from accessing this file.
RUNTIME COMMANDS
At play time, the following keystrokes offer control over MikMod:
H, function key F1
Display help panel.
S, function key F2
Display samples panel.
I, function key F3
Display instruments panel (if present in the module).
M, function key F4
Display song message panel (if present in the module).
L, function key F5
Display the playlist panel.
C, function key F6
Display the configuration panel.
digits Set volume from 10% (digit 1) to 100% (digit 0).
< Decrease volume.
> Increase volume.
-, Left
Restart current pattern / skip to previous pattern.
+, Right
Skip to next pattern in current module.
Up, Down
Scroll panel.
PgUp, PgDown
Scroll panel (faster).
Home Go on top of the panel.
End Go to the end of the panel.
( Decrease speed variable (module plays faster).
) Increase speed variable (module plays slower).
{ Decrease tempo variable (module plays slower).
} Increase tempo variable (module plays faster).
: or ; Toggle interpolation mixing.
U Toggle surround mixing.
Q Exit MikMod.
P Switch to previous module in playlist.
N Switch to next module in playlist.
R Restart current module.
space Toggle pause.
Control-L
Refresh the screen.
MENU BASICS
Some functions of MikMod are available through menus, in the playlist and configuration panels.
You can select commands in the menus either by moving the selection with the arrow keys and pressing
enter, or entering the highlighted letter corresponding ot the command you want to select.
Menu entries ending with a > character open a submenu, whereas entries ending in ... open a dialog box.
You can dismiss a submenu either by choosing a command in this menu, or using the left arrow key to go
back, or switching panels.
In dialog boxes, you can move the focus from the input line to the Ok and Cancel buttons either with the
"tab" key, or the up and down arrow keys.
Also, if the statusbar is active (which is the default behaviour), it will contain a short help text
describing the menu option currently highlighted.
PLAYLIST MENU
When the playlist panel is displayed, pressing the return key will popup a menu. The menu commands are:
Play Continue list playback from the currently highlighted module.
Remove Remove module from the playlist.
Delete...
Remove module from the playlist, and delete module file on disk, or whole archive if the module is
stored in an archive file. This function asks you to confirm your choice.
File > This entry opens a submenu with four commands, "Load", "Insert", "Save" and "Save as". The Load
and Insert commands ask you for a filename, and replace the playlist with it (load) or merge it
with the playlist (insert). No wildcards are allowed. The Save and Save as commands save the
current playlist in a file, by default ``playlist.mpl'', in the current directory. Note that
playlist filenames should end in .mpl, or they won't be loaded by MikMod.
Shuffle
Randomize the playlist.
Sort > This entry opens a submenu with sort commands. You can select a normal or reverse order, and then
sort the playlist with one of the four criteria: by name, by extension, by path or by time.
Back Discards the menu.
CONFIGURATION PANEL
The configuration panel lets you customize your MikMod settings, and save them. You can also try some
particular settings without losing your previous configuration.
Output options
This section lets you choose various vital playback settings, such as the output driver, the
stereo/mono and 16/8 bit output settings, the playback frequency, and the software mixer settings.
Playback options
This section lets you choose various module playback settings, such as the output volume, the
processing of panning effects and bacwards loops, etc.
Other options
This section lets you choose the remaining settings, such as the playlist mode, and various
program settings.
Use config
This command activates the current configuration settings, but does not save them.
Save config
This command saves and activates the current configuration settings.
Revert config
This command reverts to the on-disk configuration file settings.
MODULE FORMATS
MikMod will currently play the following common and not so common formats:
669 Composer 669 and Extended 669 modules.
AMF DSMI internal module format (Advanced Module Format, converted with M2AMF).
DSM DSIK's internal module format.
FAR Farandole composer modules.
GDM General Digital Munsic internal module format (converted with 2GDM).
IMF Imago Orpheus modules.
IT Impulse Tracker modules.
MED Amiga MED modules, but synthsounds are not supported.
MOD Protracker, Startracker, Fasttracker, Oktalyzer, and Taketracker modules.
MTM Multitracker module editor modules.
S3M Screamtracker version 3 modules.
STM Screamtracker version 2 modules.
STX STMIK converted modules.
ULT Ultratracker modules.
UNI, APUN
Old MikMod (UNI) and APlayer (APUN) internal module format.
XM Fasttracker 2 modules.
ARCHIVE FORMATS
MikMod should recognize and extract the following common archive formats. However, to use each of these
you will need to find the appropriate program(s) for MikMod to use to extract them. These are commonly
available and you will most likely find them with this distribution of MikMod.
zip Info-zip or PkZip archives, commonly used on DOS/Windows platforms.
lha, lzh
Lharc archives, commonly used on the Amiga.
zoo Zoo archives, quite rare those days...
rar Rar archives.
gz Gzip compressed files.
bz2 Bzip2 compressed files.
tar, tar.gz and tar.bz2
Tar archives, even compressed with gzip or bzip2.
FILES
$HOME/.mikmodrc (or MikMod.cfg under OS/2)
User configuration settings, can also contain a default playlist.
playlist.mpl
Default playlist filename.
AUTHORS
MikMod is the result of the work of many people, including: Jean-Paul Mikkers, Jake Stine, Miodrag
Vallat, Frank Loemker, Steve McIntyre, Raphael Assenat, Peter Amstutz, "MenTaLguY", Dimitri Boldyrev,
Shlomi Fish, Stefan Tibus, Tinic Urou. A full list of people having worked on libmikmod and MikMod is
displayed when MikMod starts.
LOCATING NEWER VERSIONS...
The official MikMod and libmikmod home page is located on
http://mikmod.raphnet.net
Version 3.2.0, 4th October 2003 MIKMOD(1)