Ubuntu Manpage: na_record — play waveform files on audio device

Provided by: speech-tools_2.1~release-6_amd64

NAME

     na_record — play waveform files on audio device

SYNOPSIS

     na_play [-h] [-itype type] [-n channels] [-f sample rate] [-ibo byteorder] [-iswap]
             [-istype type] [-c channel] [-start time] [-end time] [-from sample] [-to sample]
             [-p protocol] [-command command] [-basic] [-quality high | low] [-server host]
             [-scale scale] [-v] [-wait] input files ...

DESCRIPTION

na_play plays digital audio data to the system's audio input device from the specified
file(s). It supports a variety of file formats and native audio devices.

The following option flags are recognized:

-h Prints a short summary of usage to standard output.
-itype type
Input file type. Usually, the input type can be determined from the file's
headers, so this option is not required except for raw (unheadered) data.
Supported types are currently: nist, est, esps, snd, riff, aiff, audlab, raw,
ascii.
-n channels
Number of channels, in an unheadered input file. Again, this can usually be
determined from the headers. Default is 1.
-f sampling rate
Sampling rate, for an unheadered input file. Default is 16000.
-ibo byte order
Byte order, for an unheadered input file. Default is system byte order.
Recognized values are: MSB, LSB, native, nonnative.
-iswap
Swap bytes in an unheadered input file.
-istype type
Sample type for an unheadered input file. Recognized values are: short, mulaw,
byte, ascii.
-c channel
Select a single channel (starting at 0) for playback. This option plays only
the specified channel and discards all others.
-start time
Select a subsection of the file, starting at this time (specified in seconds).
-end time
Select a subsection of the file, ending at this time (specified in seconds).
-from sample
Select a subsection of the file, starting at this offset (specified in number of
samples).
-to sample
Select a subsection of the file, ending at this offset (specified in number of
samples).
-p protocol
Use the specified audio device protocol. The list of supported types varies
between platforms, and can be obtained using the -h flag.
-command command
If the "audio_command" protocol is specified, this argument must be given to
select the command used to play the waveform. A temporary file is created and
passed in the environment variable FILE. The sample rate is passed in the
environment varialbe SR.
-basic
Treat unheadered input files as 8kHz mu-law data (i.e. audio/basic MIME type)
-quality high | low
Select the quality of output. "high" will ensure that proper resampling is used.
"low" means to play as fast as possible with a minimum of processor time.
-server host
Specifies the host to play sound on, when using a network-aware audio protocol
(such as NAS)
-scale scale
Change the gain (volume) of the signal. The argument is a number relative to
1.0, which is the default.
-v Be verbose (i.e. print file names when playing)
-wait
Pause for a keystroke between each file.

ENVIRONMENT

           NA_PLAY_PROTOCOL
                 Audio protocol to use (as in the -p flag)
           NA_PLAY_COMMAND
                 Command used to play audio when using the audio_command protocol.
           NA_PLAY_HOST
                 Host to play audio on when using a network audio protocol.
           NA_PLAY_QUALITY
                 Playback quality (low or high)

EXAMPLES

     To play the section of foo.wav from 1.5 to 3.2 seconds:
           $ na_play -start 1.5 -end 3.2 foo.wav
     To play samples 3600 to 42000 of channel 1 of bar.wav:
           $ na_play -from 3600 -to 4200 -c 1 foo.wav

BUGS