Provided by: hmmer_3.1b1-3_amd64 
NAME
nhmmer - search DNA/RNA queries against a DNA/RNA sequence database
SYNOPSIS
nhmmer [options] <queryfile> <seqdb>
DESCRIPTION
nhmmer is used to search one or more nucleotide queries against a nucleotide sequence database. For each
query in <queryfile>, use that query to search the target database of sequences in <seqdb>, and output a
ranked list of the hits with the most significant matches to the query. A query may be either a profile
model built using hmmbuild, a sequence alignment, or a single sequence. Sequence based queries can be in
a number of formats (see --qformat), and can typically be autodetected. Note that only Stockholm format
supports the use of multiple sequence-based queries.
Either the query <queryfile> or the target <seqdb> may be '-' (a dash character), in which case the query
file or target database input will be read from a <stdin> pipe instead of from a file. Only one input
source can come through <stdin>, not both. If the query is sequence-based and passed via <stdin>, the
--qformat flag must be used. If the <queryfile> contains more than one query, then <seqdb> cannot come
from <stdin>, because we can't rewind the streaming target database to search it with another profile.
If the query is sequence-based, and not from <stdin>, a new file containing the HMM(s) built from the
input(s) in <queryfile> may optionally be produced, with the filename set using the --hmmout flag.
The output format is designed to be human-readable, but is often so voluminous that reading it is
impractical, and parsing it is a pain. The --tblout option saves output in a simple tabular format that
is concise and easier to parse. The -o option allows redirecting the main output, including throwing it
away in /dev/null.
OPTIONS
-h Help; print a brief reminder of command line usage and all available options.
OPTIONS FOR CONTROLLING OUTPUT
-o <f> Direct the main human-readable output to a file <f> instead of the default stdout.
-A <f> Save a multiple alignment of all significant hits (those satisfying inclusion thresholds) to the
file <f>.
--tblout <f>
Save a simple tabular (space-delimited) file summarizing the per-target output, with one data line
per homologous target sequence found.
--dfamtblout <f>
Save a tabular (space-delimited) file summarizing the per-hit output, similar to --tblout but more
succinct.
--aliscoresout <f>
Save to file a list of per-position scores for each hit. This is useful, for example, in
identifying regions of high score density for use in resolving overlapping hits from different
models.
--hmmout <f>
If <queryfile> is sequence-based, the internally-computed HMM(s) are written to <f>.
--acc Use accessions instead of names in the main output, where available for profiles and/or sequences.
--noali
Omit the alignment section from the main output. This can greatly reduce the output volume.
--notextw
Unlimit the length of each line in the main output. The default is a limit of 120 characters per
line, which helps in displaying the output cleanly on terminals and in editors, but can truncate
target profile description lines.
--textw <n>
Set the main output's line length limit to <n> characters per line. The default is 120.
OPTIONS CONTROLLING REPORTING THRESHOLDS
Reporting thresholds control which hits are reported in output files (the main output, --tblout, and
--dfamtblout). Hits are ranked by statistical significance (E-value).
-E <x> Report target sequences with an E-value of <= <x>. The default is 10.0, meaning that on average,
about 10 false positives will be reported per query, so you can see the top of the noise and
decide for yourself if it's really noise.
-T <x> Instead of thresholding output on E-value, instead report target sequences with a bit score of >=
<x>.
OPTIONS FOR INCLUSION THRESHOLDS
Inclusion thresholds are stricter than reporting thresholds. Inclusion thresholds control which hits are
considered to be reliable enough to be included in an output alignment or a subsequent search round, or
marked as significant ("!") as opposed to questionable ("?") in hit output.
--incE <x>
Use an E-value of <= <x> as the inclusion threshold. The default is 0.01, meaning that on
average, about 1 false positive would be expected in every 100 searches with different query
sequences.
--incT <x>
Instead of using E-values for setting the inclusion threshold, use a bit score of >= <x> as the
inclusion threshold. By default this option is unset.
OPTIONS FOR MODEL-SPECIFIC SCORE THRESHOLDING
Curated profile databases may define specific bit score thresholds for each profile, superseding any
thresholding based on statistical significance alone.
To use these options, the profile must contain the appropriate (GA, TC, and/or NC) optional score
threshold annotation; this is picked up by hmmbuild from Stockholm format alignment files. For a
nucleotide model, each thresholding option has a single per-hit threshold <x> This acts as if -T<x>
--incT<x> has been applied specifically using each model's curated thresholds.
--cut_ga
Use the GA (gathering) bit score threshold in the model to set per-hit reporting and inclusion
thresholds. GA thresholds are generally considered to be the reliable curated thresholds defining
family membership; for example, in Dfam, these thresholds are applied when annotating a genome
with a model of a family known to be found in that organism. They may allow for minimal expected
false discovery rate.
--cut_nc
Use the NC (noise cutoff) bit score threshold in the model to set per-hit reporting and inclusion
thresholds. NC thresholds are less stringent than GA; in the context of Pfam, they are generally
used to store the score of the highest-scoring known false positive.
--cut_tc
Use the NC (trusted cutoff) bit score threshold in the model to set per-hit reporting and
inclusion thresholds. TC thresholds are more stringent than GA, and are generally considered to be
the score of the lowest-scoring known true positive that is above all known false positives; for
example, in Dfam, these thresholds are applied when annotating a genome with a model of a family
not known to be found in that organism.
OPTIONS CONTROLLING THE ACCELERATION PIPELINE
HMMER3 searches are accelerated in a three-step filter pipeline: the scanning-SSV filter, the Viterbi
filter, and the Forward filter. The first filter is the fastest and most approximate; the last is the
full Forward scoring algorithm. There is also a bias filter step between SSV and Viterbi. Targets that
pass all the steps in the acceleration pipeline are then subjected to postprocessing -- domain
identification and scoring using the Forward/Backward algorithm.
Changing filter thresholds only removes or includes targets from consideration; changing filter
thresholds does not alter bit scores, E-values, or alignments, all of which are determined solely in
postprocessing.
--max Turn off (nearly) all filters, including the bias filter, and run full Forward/Backward
postprocessing on most of the target sequence. In contrast to hmmscan, the --max flag in nhmmscan
sets the scanning-SSV filter threshold to 0.4, not 1.0. Use of this flag increases sensitivity
somewhat, at a large cost in speed.
--F1 <x>
Set the P-value threshold for the SSV filter step. The default is 0.02, meaning that roughly 2%
of the highest scoring nonhomologous targets are expected to pass the filter.
--F2 <x>
Set the P-value threshold for the Viterbi filter step. The default is 0.001.
--F3 <x>
Set the P-value threshold for the Forward filter step. The default is 1e-5.
--nobias
Turn off the bias filter. This increases sensitivity somewhat, but can come at a high cost in
speed, especially if the query has biased residue composition (such as a repetitive sequence
region, or if it is a membrane protein with large regions of hydrophobicity). Without the bias
filter, too many sequences may pass the filter with biased queries, leading to slower than
expected performance as the computationally intensive Forward/Backward algorithms shoulder an
abnormally heavy load.
OTHER OPTIONS
--tformat <s>
Assert that the target sequence database file is in format <s>. Accepted formats include fasta,
embl, genbank, ddbj, uniprot, stockholm, pfam, a2m, and afa. The default is to autodetect the
format of the file.
--qformat <s>
Declare that the input queryfile is in format <s>. This is used when the query is sequence-based,
rather than made up of profile model(s). Currently the accepted multiple alignment sequence file
formats include Stockholm, Aligned FASTA, Clustal, NCBI PSI-BLAST, PHYLIP, Selex, and UCSC SAM
A2M. Default is to autodetect the format of the file.
--nonull2
Turn off the null2 score corrections for biased composition.
-Z <x> For the purposes of per-hit E-value calculations, Assert that the total size of the target
database is <x> million nucleotides, rather than the actual number of targets seen.
--seed <n>
Set the random number seed to <n>. Some steps in postprocessing require Monte Carlo simulation.
The default is to use a fixed seed (42), so that results are exactly reproducible. Any other
positive integer will give different (but also reproducible) results. A choice of 0 uses a
randomly chosen seed.
--w_beta <x>
Window length tail mass. The upper bound, W, on the length at which nhmmer expects to find an
instance of the model is set such that the fraction of all sequences generated by the model with
length >= W is less than <x>. The default is 1e-7. This flag may be used to override the value
of W established for the model by hmmbuild, or when the query is sequence-based.
--w_length <n>
Override the model instance length upper bound, W, which is otherwise controlled by --w_beta. It
should be larger than the model length. The value of W is used deep in the acceleration pipeline,
and modest changes are not expected to impact results (though larger values of W do lead to longer
run time). This flag may be used to override the value of W established for the model by
hmmbuild, or when the query is sequence-based.
--toponly
Only search the top strand. By default both the query sequence and its reverse-complement are
searched.
--bottomonly
Only search the bottom (reverse-complement) strand. By default both the query sequence and its
reverse-complement are searched.
--cpu <n>
Set the number of parallel worker threads to <n>. By default, HMMER sets this to the number of
CPU cores it detects in your machine - that is, it tries to maximize the use of your available
processor cores. Setting <n> higher than the number of available cores is of little if any value,
but you may want to set it to something less. You can also control this number by setting an
environment variable, HMMER_NCPU.
This option is only available if HMMER was compiled with POSIX threads support. This is the
default, but it may have been turned off at compile-time for your site or machine for some reason.
--stall
For debugging the MPI master/worker version: pause after start, to enable the developer to attach
debuggers to the running master and worker(s) processes. Send SIGCONT signal to release the pause.
(Under gdb: (gdb) signal SIGCONT) (Only available if optional MPI support was enabled at compile-
time.)
--mpi Run in MPI master/worker mode, using mpirun. (Only available if optional MPI support was enabled
at compile-time.)
SEE ALSO
See hmmer(1) for a master man page with a list of all the individual man pages for programs in the HMMER
package.
For complete documentation, see the user guide that came with your HMMER distribution (Userguide.pdf); or
see the HMMER web page ().
COPYRIGHT
Copyright (C) 2013 Howard Hughes Medical Institute.
Freely distributed under the GNU General Public License (GPLv3).
For additional information on copyright and licensing, see the file called COPYRIGHT in your HMMER source
distribution, or see the HMMER web page ().
AUTHOR
Eddy/Rivas Laboratory
Janelia Farm Research Campus
19700 Helix Drive
Ashburn VA 20147 USA
http://eddylab.org
HMMER 3.1b1 May 2013 nhmmer(1)