Provided by: php5-cgi_5.5.9+dfsg-1ubuntu4.29_amd64 bug

NAME

       php - PHP Command Line Interface 'CLI'

       php-cgi - PHP Common Gateway Interface 'CGI' command

SYNOPSIS

       php [options] [ -f ] file [[--] args...]

       php [options] -r code [[--] args...]

       php [options] [-B begin_code] -R code [-E end_code] [[--] args...]

       php [options] [-B begin_code] -F file [-E end_code] [[--] args...]

       php [options] -- [ args...]

       php [options] -a

       php [options] -S addr:port [-t docroot]

DESCRIPTION

       PHP  is a widely-used general-purpose scripting language that is especially suited for Web
       development and can be embedded into HTML. This is the command line interface that enables
       you to do the following:

       You  can parse and execute files by using parameter -f followed by the name of the file to
       be executed.

       Using parameter -r you can directly execute PHP code simply as you would do inside a  .php
       file when using the eval() function.

       It  is also possible to process the standard input line by line using either the parameter
       -R or -F. In this mode each separate input line causes the code specified  by  -R  or  the
       file  specified  by  -F  to  be  executed.   You can access the input line by $argn. While
       processing the input lines $argi contains the number of the actual line  being  processed.
       Further  more  the  parameters  -B  and -E can be used to execute code (see -r) before and
       after all input lines have been processed respectively. Notice that the input is read from
       STDIN  and  therefore  reading  from STDIN explicitly changes the next input line or skips
       input lines.

       PHP also contains an built-in web server for application development purpose. By using the
       -S  option  where  addr:port  point  to  a  local address and port PHP will listen to HTTP
       requests on that address and port and serve files from the current  working  directory  or
       the docroot passed by the -t option.

       If  none  of  -r -f -B -R -F -E or -S is present but a single parameter is given then this
       parameter is taken as the filename to parse and execute (same as with -f). If no parameter
       is present then the standard input is read and executed.

OPTIONS

       --interactive
       -a             Run  PHP  interactively.  This  lets  you  enter  snippets of PHP code that
                      directly get executed. When readline support is enabled you  can  edit  the
                      lines and also have history support.

       --bindpath address:port|port
       -b address:port|port
                      Bind Path for external FASTCGI Server mode (CGI only).

       --no-chdir
       -C             Do not chdir to the script's directory (CGI only).

       --no-header
       -q             Quiet-mode. Suppress HTTP header output (CGI only).

       --timing count
       -T count       Measure execution time of script repeated count times (CGI only).

       --php-ini path|file
       -c path|file   Look for php.ini file in the directory path or use the specified file

       --no-php-ini
       -n             No php.ini file will be used

       --define foo[=bar]
       -d foo[=bar]   Define INI entry foo with value bar

       -e             Generate extended information for debugger/profiler

       --file file
       -f file        Parse and execute file

       --global name
       -g name        Make variable name global in script.

       --help
       -h             This help

       --hide-args
       -H             Hide  script  name (file) and parameters (args...) from external tools. For
                      example you may want to use this when a php script is started as  a  daemon
                      and the command line contains sensitive data such as passwords.

       --info
       -i             PHP information and configuration

       --syntax-check
       -l             Syntax check only (lint)

       --modules
       -m             Show compiled in modules

       --run code
       -r code        Run PHP code without using script tags '<?..?>'

       --process-begin code
       -B begin_code  Run PHP begin_code before processing input lines

       --process-code code
       -R code        Run PHP code for every input line

       --process-file file
       -F file        Parse and execute file for every input line

       --process-end code
       -E end_code    Run PHP end_code after processing all input lines

       --syntax-highlight
       -s             Output HTML syntax highlighted source

       --server addr:port
       -S addr:port   Start built-in web server on the given local address and port

       --docroot docroot
       -t docroot     Specify the document root to be used by the built-in web server

       --version
       -v             Version number

       --stripped
       -w             Output source with stripped comments and whitespace

       --zend-extension file
       -z file        Load Zend extension file

       args...        Arguments  passed  to script. Use '--' args when first argument starts with
                      '-' or script is read from stdin

       --rfunction    name
       --rf           name Shows information about function name

       --rclass       name
       --rc           name Shows information about class name

       --rextension   name
       --re           name Shows information about extension name

       --rzendextension
                      name
       --rz           name Shows information about Zend extension name

       --rextinfo     name
       --ri           name Shows configuration for extension name

       --ini          Show configuration file names

FILES

       /etc/php5/cli/php.ini
                      The configuration file for the CLI version of PHP.

       /etc/php5/cgi/php.ini
                      The configuration file for the CGI version of PHP.

       /etc/php5/apache2/php.ini
                      The configuration file for the version of PHP that apache2 uses.

EXAMPLES

       php -r 'echo "Hello World\n";'
            This command simply writes the text "Hello World" to standard out.

       php -r 'print_r(gd_info());'
            This shows the configuration of your gd extension. You can use this to  easily  check
            which  image formats you can use. If you have any dynamic modules you may want to use
            the same ini file that php uses when executed from your  webserver.  There  are  more
            extensions which have such a function. For dba use:
            php -r 'print_r(dba_handlers(1));'

       php -R 'echo strip_tags($argn)."\n";'
            This PHP command strips off the HTML tags line by line and outputs the result. To see
            how it works you can first look at the following PHP command  ´php  -d  html_errors=1
            -i´  which  uses  PHP to output HTML formatted configuration information. If you then
            combine those two ´php ...|php ...´ you'll see what happens.

       php -E 'echo "Lines: $argi\n";'
            Using this PHP command you can count the lines being input.

       php -R '@$l+=count(file($argn));' -E 'echo "Lines:$l\n";'
            In this example PHP expects each input line being a file. It counts all lines of  the
            files  specified by each input line and shows the summarized result.  You may combine
            this with tools like find and change the php scriptlet.

       php -R 'echo "$argn\n"; fgets(STDIN);'
            Since you have access to STDIN from within -B -R -F and -E you can skip certain input
            lines  with  your code. But note that in such cases $argi only counts the lines being
            processed by php itself. Having read this you will guess what the above program does:
            skipping every second input line.

TIPS

       You  can use a shebang line to automatically invoke php from scripts. Only the CLI version
       of PHP will ignore such a first line as shown below:

              #!/bin/php
              <?php
               // your script
              ?>

SEE ALSO

       For a more or less complete description of PHP look here:
       http://www.php.net/manual/

BUGS

       You can view the list of known bugs or report any new bug you found at:
       http://bugs.php.net

AUTHORS

       The PHP Group: Thies C. Arntzen, Stig Bakken, Andi  Gutmans,  Rasmus  Lerdorf,  Sam  Ruby,
       Sascha Schumann, Zeev Suraski, Jim Winstead, Andrei Zmievski.

       Additional  work for the CLI sapi was done by Edin Kadribasic, Marcus Boerger and Johannes
       Schlueter.

       A List of active developers can be found here:
       http://www.php.net/credits.php

       And last but not least PHP was developed with the help of a huge  amount  of  contributors
       all around the world.

VERSION INFORMATION

       This manpage describes php, version 5.5.9-1ubuntu4.29.

COPYRIGHT

       Copyright © 1997-2013 The PHP Group

       This  source file is subject to version 3.01 of the PHP license, that is bundled with this
       package in the file LICENSE, and is available through the world-wide-web at the  following
       url:
       http://www.php.net/license/3_01.txt

       If  you  did not receive a copy of the PHP license and are unable to obtain it through the
       world-wide-web, please send  a  note  to  license@php.net  so  we  can  mail  you  a  copy
       immediately.