Ubuntu Manpage: pmie_check, pmie_daily - administration of the Performance Co-Pilot inference engine

NAME

       pmie_check, pmie_daily - administration of the Performance Co-Pilot inference engine

SYNOPSIS

       $PCP_BINADM_DIR/pmie_check [-CNsV] [-c control]
       $PCP_BINADM_DIR/pmie_daily  [-NV] [-c control] [-k discard] [-m addresses] [-x compress] [-X program] [-Y
       regex]

DESCRIPTION

This series of shell scripts and associated control files may be used to create a customized regime of
administration and management for the Performance Co-Pilot (see PCPintro(1)) inference engine, pmie(1).

pmie_daily is intended to be run once per day, preferably in the early morning, as soon after midnight as
practicable. Its task is to rotate the log files for the running pmie processes - these files may grow
without bound if the ``print'' action is used, or any other pme action writes to its stdout/stderr
streams. After some period, old pmie log files are discarded. This period is 14 days by default, but
may be changed using the -k option. Two special values are recognized for the period (discard), namely 0
to keep no log files beyond the current one, and forever to prevent any log files being discarded.

Log files can optionally be compressed after some period (compress), to conserve disk space. This is
particularly useful for large numbers of pmie processes under the control of pmie_check. The -x option
specifies the number of days after which to compress archive data files, and the -X option specifies the
program to use for compression - by default this is bzip2(1). Use of the -Y option allows a regular
expression to be specified causing files in the set of files matched for compression to be omitted - this
allows only the data file to be compressed, and also prevents the program from attempting to compress it
more than once. The default regex is ".meta$|.index$|.Z$|.gz$|.bz2|.zip$" - such files are filtered
using the -v option to egrep(1).

Use of the -m option causes pmie_daily to construct a summary of the log files generated for all
monitored hosts in the last 24 hours (lines matching `` OK '' are culled), and e-mail that summary to the
set of space-separated addresses.

pmie_check may be run at any time, and is intended to check that the desired set of pmie(1) processes are
running, and if not to re-launch any failed inference engines. Use of the -s option provides the reverse
functionality, allowing the set of pmie processes to be cleanly shutdown. Use of the -C option queries
the system service runlevel information for pmie, and uses that to determine whether to start or stop
processes.

Both pmie_check and pmie_daily are controlled by a PCP inference engine control file that specifies the
pmie instances to be managed. The default control file is $PCP_PMIECONTROL_PATH but an alternate may be
specified using the -c option.

The control file should be customized according to the following rules.

1. Lines beginning with a ``#'' are comments.
2. Lines beginning with a ``$'' are assumed to be assignments to environment variables in the style
of sh(1), and all text following the ``$'' will be eval'ed by the script reading the control file,
and the corresponding variable exported into the environment. This is particularly useful to set
and export variables into the environment of the administrative script, e.g.
$ PMCD_CONNECT_TIMEOUT=20
Warning: The $PCP_PMIECONTROL_PATH file must not be writable by any user other than root.
3. There should be one line in the control file for each pmie instance of the form:

host y|n logfile args

4. Fields within a line of the control file are separated by one or more spaces or tabs.
5. The first field is the name of the host that is the default source of the performance metrics for
this pmie instance.
6. The second field indicates whether this pmie instance needs to be started under the control of
pmsocks(1) to connect to a pmcd through a firewall (y or n).
8. The third field is the name of the pmie activity log file. A useful convention is that pmie
instances monitoring the local host with hostname myhost are maintained in the directory
$PCP_LOG_DIR/pmie/myhost, while activity logs for the remote host mumble are maintained in
$PCP_LOG_DIR/pmie/mumble. This is consistent with the way pmlogger(1) maintains its activity logs
and archive files.
9. All other fields are interpreted as arguments to be passed to pmie(1). Most typically this would
be the -c option.

The following sample control lines specify one pmie instance monitoring the local host (wobbly), and
another monitoring performance metrics from the host splat.

wobbly n PCP_LOG_DIR/pmie/wobbly -c config.default
splat n PCP_LOG_DIR/pmie/splat -c splat/cpu.conf

Typical crontab(5) entries for periodic execution of pmie_daily and pmie_check are given in
$PCP_SYSCONF_DIR/pmie/crontab (unless installed by default in /etc/cron.d already) and shown below.

# daily processing of pmie logs
08 0 * * * $PCP_BINADM_DIR/pmie_daily
# every 30 minutes, check pmie instances are running
28,58 * * * * $PCP_BINADM_DIR/pmie_check

The output from the cron(1) execution of the scripts may be extended using the -V option to the scripts
which will enable verbose tracing of their activity. By default the scripts generate no output unless
some error or warning condition is encountered.

The -N option enables a ``show me'' mode, where the actions are echoed, but not executed, in the style of
``make -n''. Using -N in conjunction with -V maximizes the diagnostic capabilities for debugging.

FILES

       $PCP_PMIECONTROL_PATH
                 the default PCP inference engine control file
                 Warning: this file must not be writable by any user other than root.

       $PCP_SYSCONF_DIR/pmie/crontab
                 sample crontab for automated script execution by $PCP_USER (or  root)  -  exists  only  if  the
                 platform does not support the /etc/cron.d mechanism.

       $PCP_SYSCONF_DIR/pmie/config.default
                 default  pmlogger  configuration  file  location  for  a  localhost inference engine, typically
                 generated automatically by pmieconf(1).

       $PCP_LOG_DIR/pmie/hostname
                 default location for the pmie log file for the host hostname

       $PCP_LOG_DIR/pmie/hostname/lock
                 transient lock file to guarantee mutual exclusion  during  pmie  administration  for  the  host
                 hostname - if present, can be safely removed if neither pmie_daily nor pmie_check are running

       $PCP_LOG_DIR/NOTICES
                 PCP ``notices'' file used by pmie(1) and friends

PCP ENVIRONMENT

       Environment  variables with the prefix PCP_ are used to parameterize the file and directory names used by
       PCP.  On each installation, the file /etc/pcp.conf contains the local values for  these  variables.   The
       $PCP_CONF variable may be used to specify an alternative configuration file, as described in pcp.conf(5).

NAME

SYNOPSIS

DESCRIPTION

FILES

PCP ENVIRONMENT

SEE ALSO