Provided by: percona-toolkit_2.2.7-1~dfsg1_all bug

NAME

       pt-summary - Summarize system information nicely.

SYNOPSIS

       Usage: pt-summary

       pt-summary conveniently summarizes the status and configuration of a server.  It is not a
       tuning tool or diagnosis tool.  It produces a report that is easy to diff and can be
       pasted into emails without losing the formatting.  This tool works well on many types of
       Unix systems.

       Download and run:

          wget http://percona.com/get/pt-summary
          bash ./pt-summary

RISKS

       Percona Toolkit is mature, proven in the real world, and well tested, but all database
       tools can pose a risk to the system and the database server.  Before using this tool,
       please:

       •   Read the tool's documentation

       •   Review the tool's known "BUGS"

       •   Test the tool on a non-production server

       •   Backup your production server and verify the backups

DESCRIPTION

       pt-summary runs a large variety of commands to inspect system status and configuration,
       saves the output into files in a temporary directory, and then runs Unix commands on these
       results to format them nicely.  It works best when executed as a privileged user, but will
       also work without privileges, although some output might not be possible to generate
       without root.

OUTPUT

       Many of the outputs from this tool are deliberately rounded to show their magnitude but
       not the exact detail. This is called fuzzy-rounding. The idea is that it doesn't matter
       whether a particular counter is 918 or 921; such a small variation is insignificant, and
       only makes the output hard to compare to other servers. Fuzzy-rounding rounds in larger
       increments as the input grows. It begins by rounding to the nearest 5, then the nearest
       10, nearest 25, and then repeats by a factor of 10 larger (50, 100, 250), and so on, as
       the input grows.

       The following is a simple report generated from a CentOS virtual machine, broken into
       sections with commentary following each section. Some long lines are reformatted for
       clarity when reading this documentation as a manual page in a terminal.

        # Percona Toolkit System Summary Report ######################
                Date | 2012-03-30 00:58:07 UTC (local TZ: EDT -0400)
            Hostname | localhost.localdomain
              Uptime | 20:58:06 up 1 day, 20 min, 1 user,
                       load average: 0.14, 0.18, 0.18
              System | innotek GmbH; VirtualBox; v1.2 ()
         Service Tag | 0
            Platform | Linux
             Release | CentOS release 5.5 (Final)
              Kernel | 2.6.18-194.el5
        Architecture | CPU = 32-bit, OS = 32-bit
           Threading | NPTL 2.5
            Compiler | GNU CC version 4.1.2 20080704 (Red Hat 4.1.2-48).
             SELinux | Enforcing
         Virtualized | VirtualBox

       This section shows the current date and time, and a synopsis of the server and operating
       system.

        # Processor ##################################################
          Processors | physical = 1, cores = 0, virtual = 1, hyperthreading = no
              Speeds | 1x2510.626
              Models | 1xIntel(R) Core(TM) i5-2400S CPU @ 2.50GHz
              Caches | 1x6144 KB

       This section is derived from /proc/cpuinfo.

        # Memory #####################################################
               Total | 503.2M
                Free | 29.0M
                Used | physical = 474.2M, swap allocated = 1.0M,
                       swap used = 16.0k, virtual = 474.3M
             Buffers | 33.9M
              Caches | 262.6M
               Dirty | 396 kB
             UsedRSS | 201.9M
          Swappiness | 60
         DirtyPolicy | 40, 10
         Locator  Size  Speed    Form Factor  Type    Type Detail
         =======  ====  =====    ===========  ====    ===========

       Information about memory is gathered from "free". The Used statistic is the total of the
       rss sizes displayed by "ps". The Dirty statistic for the cached value comes from
       /proc/meminfo. On Linux, the swappiness settings are gathered from "sysctl". The final
       portion of this section is a table of the DIMMs, which comes from "dmidecode". In this
       example there is no output.

        # Mounted Filesystems ########################################
          Filesystem                       Size Used Type  Opts Mountpoint
          /dev/mapper/VolGroup00-LogVol00   15G  17% ext3  rw   /
          /dev/sda1                         99M  13% ext3  rw   /boot
          tmpfs                            252M   0% tmpfs rw   /dev/shm

       The mounted filesystem section is a combination of information from "mount" and "df". This
       section is skipped if you disable "--summarize-mounts".

        # Disk Schedulers And Queue Size #############################
                dm-0 | UNREADABLE
                dm-1 | UNREADABLE
                 hdc | [cfq] 128
                 md0 | UNREADABLE
                 sda | [cfq] 128

       The disk scheduler information is extracted from the /sys filesystem in Linux.

        # Disk Partioning ############################################
        Device       Type      Start        End               Size
        ============ ==== ========== ========== ==================
        /dev/sda     Disk                              17179869184
        /dev/sda1    Part          1         13           98703360
        /dev/sda2    Part         14       2088        17059230720

       Information about disk partitioning comes from "fdisk -l".

        # Kernel Inode State #########################################
        dentry-state | 10697 8559  45 0  0  0
             file-nr | 960   0  50539
            inode-nr | 14059 8139

       These lines are from the files of the same name in the /proc/sys/fs directory on Linux.
       Read the "proc" man page to learn about the meaning of these files on your system.

        # LVM Volumes ################################################
        LV       VG         Attr   LSize   Origin Snap% Move Log Copy% Convert
        LogVol00 VolGroup00 -wi-ao 269.00G
        LogVol01 VolGroup00 -wi-ao   9.75G

       This section shows the output of "lvs".

        # RAID Controller ############################################
          Controller | No RAID controller detected

       The tool can detect a variety of RAID controllers by examining "lspci" and "dmesg"
       information. If the controller software is installed on the system, in many cases it is
       able to execute status commands and show a summary of the RAID controller's status and
       configuration. If your system is not supported, please file a bug report.

        # Network Config #############################################
          Controller | Intel Corporation 82540EM Gigabit Ethernet Controller
         FIN Timeout | 60
          Port Range | 61000

       The network controllers attached to the system are detected from "lspci". The TCP/IP
       protocol configuration parameters are extracted from "sysctl". You can skip this section
       by disabling the "--summarize-network" option.

        # Interface Statistics #######################################
        interface rx_bytes rx_packets rx_errors tx_bytes tx_packets tx_errors
        ========= ======== ========== ========= ======== ========== =========
        lo        60000000      12500         0 60000000      12500         0
        eth0      15000000      80000         0  1500000      10000         0
        sit0             0          0         0        0          0         0

       Interface statistics are gathered from "ip -s link" and are fuzzy-rounded. The columns are
       received and transmitted bytes, packets, and errors.  You can skip this section by
       disabling the "--summarize-network" option.

        # Network Connections ########################################
          Connections from remote IP addresses
            127.0.0.1           2
          Connections to local IP addresses
            127.0.0.1           2
          Connections to top 10 local ports
            38346               1
            60875               1
          States of connections
            ESTABLISHED         5
            LISTEN              8

       This section shows a summary of network connections, retrieved from "netstat" and "fuzzy-
       rounded" to make them easier to compare when the numbers grow large.  There are two sub-
       sections showing how many connections there are per origin and destination IP address, and
       a sub-section showing the count of ports in use.  The section ends with the count of the
       network connections' states.  You can skip this section by disabling the
       "--summarize-network" option.

        # Top Processes ##############################################
          PID USER  PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND
            1 root  15   0  2072  628  540 S  0.0  0.1   0:02.55 init
            2 root  RT  -5     0    0    0 S  0.0  0.0   0:00.00 migration/0
            3 root  34  19     0    0    0 S  0.0  0.0   0:00.03 ksoftirqd/0
            4 root  RT  -5     0    0    0 S  0.0  0.0   0:00.00 watchdog/0
            5 root  10  -5     0    0    0 S  0.0  0.0   0:00.97 events/0
            6 root  10  -5     0    0    0 S  0.0  0.0   0:00.00 khelper
            7 root  10  -5     0    0    0 S  0.0  0.0   0:00.00 kthread
           10 root  10  -5     0    0    0 S  0.0  0.0   0:00.13 kblockd/0
           11 root  20  -5     0    0    0 S  0.0  0.0   0:00.00 kacpid
        # Notable Processes ##########################################
          PID    OOM    COMMAND
         2028    +0    sshd

       This section shows the first few lines of "top" so that you can see what processes are
       actively using CPU time.  The notable processes include the SSH daemon and any process
       whose out-of-memory-killer priority is set to 17. You can skip this section by disabling
       the "--summarize-processes" option.

        # Simplified and fuzzy rounded vmstat (wait please) ##########
          procs  ---swap-- -----io---- ---system---- --------cpu--------
           r  b    si   so    bi    bo     ir     cs  us  sy  il  wa  st
           2  0     0    0     3    15     30    125   0   0  99   0   0
           0  0     0    0     0     0   1250    800   6  10  84   0   0
           0  0     0    0     0     0   1000    125   0   0 100   0   0
           0  0     0    0     0     0   1000    125   0   0 100   0   0
           0  0     0    0     0   450   1000    125   0   1  88  11   0
        # The End ####################################################

       This section is a trimmed-down sample of "vmstat 1 5", so you can see the general status
       of the system at present. The values in the table are fuzzy-rounded, except for the CPU
       columns.  You can skip this section by disabling the "--summarize-processes" option.

OPTIONS

       --config
           type: string

           Read this comma-separated list of config files.  If specified, this must be the first
           option on the command line.

       --help
           Print help and exit.

       --read-samples
           type: string

           Create a report from the files in this directory.

       --save-samples
           type: string

           Save the collected data in this directory.

       --sleep
           type: int; default: 5

           How long to sleep when gathering samples from vmstat.

       --summarize-mounts
           default: yes; negatable: yes

           Report on mounted filesystems and disk usage.

       --summarize-network
           default: yes; negatable: yes

           Report on network controllers and configuration.

       --summarize-processes
           default: yes; negatable: yes

           Report on top processes and "vmstat" output.

       --version
           Print tool's version and exit.

ENVIRONMENT

       This tool does not use any environment variables.

SYSTEM REQUIREMENTS

       This tool requires the Bourne shell (/bin/sh).

BUGS

       For a list of known bugs, see <http://www.percona.com/bugs/pt-summary>.

       Please report bugs at <https://bugs.launchpad.net/percona-toolkit>.  Include the following
       information in your bug report:

       •   Complete command-line used to run the tool

       •   Tool "--version"

       •   MySQL version of all servers involved

       •   Output from the tool including STDERR

       •   Input files (log/dump/config files, etc.)

       If possible, include debugging output by running the tool with "PTDEBUG"; see
       "ENVIRONMENT".

DOWNLOADING

       Visit <http://www.percona.com/software/percona-toolkit/> to download the latest release of
       Percona Toolkit.  Or, get the latest release from the command line:

          wget percona.com/get/percona-toolkit.tar.gz

          wget percona.com/get/percona-toolkit.rpm

          wget percona.com/get/percona-toolkit.deb

       You can also get individual tools from the latest release:

          wget percona.com/get/TOOL

       Replace "TOOL" with the name of any tool.

AUTHORS

       Baron Schwartz, Kevin van Zonneveld, and Brian Fraser

ABOUT PERCONA TOOLKIT

       This tool is part of Percona Toolkit, a collection of advanced command-line tools for
       MySQL developed by Percona.  Percona Toolkit was forked from two projects in June, 2011:
       Maatkit and Aspersa.  Those projects were created by Baron Schwartz and primarily
       developed by him and Daniel Nichter.  Visit <http://www.percona.com/software/> to learn
       about other free, open-source software from Percona.

COPYRIGHT, LICENSE, AND WARRANTY

       This program is copyright 2011-2014 Percona LLC and/or its affiliates, 2010-2011 Baron
       Schwartz.

       THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
       WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
       PURPOSE.

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as published by the Free Software Foundation, version 2; OR
       the Perl Artistic License.  On UNIX and similar systems, you can issue `man perlgpl' or
       `man perlartistic' to read these licenses.

       You should have received a copy of the GNU General Public License along with this program;
       if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
       MA  02111-1307  USA.

VERSION

       pt-summary 2.2.7