Provided by: spew_1.0.8-1build1_amd64 bug

NAME

       spew - measures I/O performance and/or generates I/O load

SYNOPSIS

       spew --write|--read|--read-after-write [OPTION]... TRANSFER_SIZE[kKmMgG] FILE

DESCRIPTION

       An  I/O  performance  measurement  and load generation tool. Writes and/or reads generated
       data to or from a character device, block device, or regular file.

       -B, --max-buffer-size=BUFFER_SIZE
              Each read(2)/write(2) call uses a maximum buffer of size BUFFER_SIZE.

       -b, --min-buffer-size=BUFFER_SIZE
              Each read(2)/write(2) call uses a minimum buffer of size BUFFER_SIZE.

       -c, --continue-after-error
              Continue after data integrity errors.

       -d, --direct
              Use direct I/O. Should only be used  on  block  device  files.  Not  all  operating
              systems support direct I/O

       -g, --generate-load
              Equivalent to: -v -t -P -p random -i 0.

       -i, --iterations=COUNT
              Write/read data COUNT times. If count is 0, repeats forever.

       -l, --logfile=LOGFILE
              Send log messages to LOGFILE.

       --no-progress
              Don't show progress (default).

       --no-rcfiles
              Don't use standard rcfiles.

       -q, --no-statistics
              Don't output statistics.

       --no-tui
              Don't use TUI interface.

       -o, --offset=OFFSET
              Seek to OFFSET before starting I/O.

       -P, --progress
              Show progress.

       -p, --pattern=PATTERN
              Use data pattern PATTERN when reading or writing data.

       -r, --random
              Read/Write buffers to random offsets.

       --raw  An alias for --read-after-write.

       --rcfile=RCFILE
              Read command-line options from RCFILE.

       --read Read date from FILE.

       --read-after-write
              Read back data after writing to FILE.

       -S, --seed=SEED
              Use SEED for random number seed.

       -s, --sync
              Use synchronous I/O.

       --statistics
              Output statistics (default).

       -t, --tui
              Use curses-based, terminal user interface.

       -u, --units=UNITS
              Show transfer rate in UNITS units.

       --usage
              Show brief usage message and exit.

       -V, --version
              Output version information and exit.

       -v, --detailed-statistics
              Output detailed statistics.

       --write
              Write data to FILE.

       -?, --help
              Show this help and exit.

       FILE   Regular or device file to write data to.

       LOGFILE
              Path to a file used for logging.

       MAX_BUFFER_SIZE
              Minimum  buffer size used in each read(2)/write(2) call (default is MIN_BUFFER_SIZE
              bytes).  MAX_BUFFER_SIZE. Must be  an  even  multiple  of  512  bytes  and  can  be
              specified   in   bytes,  kibibytes(k),  kilobytes(K),  mebibytes(m),  megabytes(M),
              gibibytes(g),  gigabytes(G).   tebibytes(t),  or   terabytes(T).    MAX_BUFFER_SIZE
              defaults  to MIN_BUFFER_SIZE.  If MAX_BUFFER_SIZE > MIN_BUFFER_SIZE, random buffers
              sizes between the two limits are used.  MAX_BUFFER_SIZE must be an even multiple of
              MIN_BUFFER_SIZE.

       MIN_BUFFER_SIZE
              Minimum  buffer  size  used  in  each read(2)/write(2) call (default is 512 bytes).
              MIN_BUFFER_SIZE. Must be an even multiple of 512 bytes  and  can  be  specified  in
              bytes,   kibibytes(k),   kilobytes(K),  mebibytes(m),  megabytes(M),  gibibytes(g),
              gigabytes(G).  tebibytes(t), or terabytes(T).

       OFFSET Position to seek to in the file before starting I/O (default is 0). OFFSET must  be
              an  even  multiple  of  512  bytes  and  can  be  specified in bytes, kibibytes(k),
              kilobytes(K),    mebibytes(m),    megabytes(M),     gibibytes(g),     gigabytes(G).
              tebibytes(t), or terabytes(T).

       PATTERN
              Data  pattern  used when writing/reading data. Available patterns are: none, zeros,
              ones, alt, random, numbers, and "#" (where "#" is  a  number  between  0-255).  The
              default pattern is "none".

       RCFILE Read   additional   command-line   options  from  RCFILE.   Other  options  on  the
              command-line will override options in RCFILE.

       SEED   Used to seed the random number generator Must be >= 1 and <= 2^32.

       TRANSFER_SIZE
              Total number of bytes to transfer (must be an even multiple of both MIN_BUFFER_SIZE
              and   MAX_BUFFER)SIZE).   TRANSFER_SIZE  can  be  specified  in  bytes,  kilobytes,
              megabytes, or gigabytes.

       UNITS  Kibibytes(k), kilobytes(K), mebibytes(m), megabytes(M), gibibytes(g), gigabytes(G).
              tebibytes(t), or terabytes(T).

EXAMPLES

       spew --write -b 16k 1m /tmp/bigfile

       or

       spew -b 16k 1m /tmp/bigfile

       Writes  1  mebibyte  (1  mebibyte = 1024*1024 bytes) using 16 kibibytes (1 kibibyte = 1024
       bytes) requests to the file /tmp/bigfile using the default pattern (random).  Displays the
       write transfer rate in kibibytes per second and the write transfer time in seconds.

       spew --write -u m -i 10 -b 1k 256k /dev/sda1

       or

       spew -u m -i 10 -b 1k 256k /dev/sda1

       Writes 256 kibibytes using 1 kibibyte requests to the block device file /dev/sda1 10 times
       using the default pattern (random).  The iteration and cumulative write transfer rates are
       displayed  in  mebibytes  per second and the iteration and cumulative write transfer times
       are displayed in seconds.

       spew --raw -d -o 1m -b 16m 1g /tmp/bigfile

       or

       regorge -s -o 1m -b 16m 1g /tmp/bigfile

       Write 1 gibibyte (1 gibibyte = 1024*1024*1024 bytes) starting at an offset of  1  mebibyte
       using  16  mebibyte  requests to the file /tmp/bigfile using the default pattern (random).
       The data is written synchronously and flushed at file close.  Then read in the  same  data
       using  the same request size and offset.  The data is checked to ensure that the data read
       in  matches  the  data  read  out.   Write  and  read  transfer  rates  are  displayed  in
       kibibytes/second.  Read and write transfer times are displayed in seconds.

       spew --read -i 0 -u M -p zeros -b 512 1m /dev/zero

       or

       gorge -i 0 -u M -p zeros -b 512 1m /dev/zero

       Read 1 mebibyte of data using 512 byte requests from the file /dev/zero an infinite number
       of times using the zeros pattern (don't check the data).   The  iteration  and  cumulative
       read  transfer  rates are displayed in megabytes (1 megabyte = 1,000,000 bytes) per second
       and the iteration and cumulative read transfer times are displayed in seconds.

       spew --raw -g -r -b 1k -B 256K 1t /dev/md1

       or

       regorge -g -r -b 1k -B 256K 1t /dev/md1

       Write 1 tebibyte (1 tebibyte = 1024*1024*1024*1024 bytes) using 1-256 kibibyte requests to
       the  block  device  /dev/md1  using the random pattern.  Random seeks are performed before
       each transfer, but each block between the start and end of the  data  is  written  exactly
       once.   The  request sizes are chosen randomly.  Then read in the same data using the same
       request sizes and seeks in the same sequence.   Repeat  the  above  sequence  an  infinite
       number of times until told to quit (via signal or TUI command).

       The  data is checked to ensure that the data read in matches the data read out.  A curses-
       based TUI is used to display iteration and cumulative transfer rates, transfer times,  and
       bytes transferred.  Display verbose statistics after quitting.

ALGORITHMS

       The   following   algorithm   is  used  to  determine  blocksize  when  MAX_BUFFER_SIZE  >
       MIN_BUFFER_SIZE:

       Find the largest blocksize that is a power of 2 and  is  >=  MAX_BUFFER_SIZE.   Call  this
       maxbuffersize.   Find   the   smallest  buffersize  that  is  a  power  of  2  and  is  >=
       MIN_BUFFER_SIZE. Call this minbuffersize.  Chunksize  =  maxbuffersize  *  (difference  in
       number   of   bits  between  min  and  maxbuffersize  +  1).   The  number  of  chunks  is
       TRANSFER_SIZE/chunksize.  Call  this  numchunks.   There  will  be  numchunks  number   of
       read/writes  that  are of size maxbuffersize, 2 * numchunks number of read/writes that are
       of  size  maxbuffersize/2,  4  *  numchunks  number  of  read/writes  that  are  of   size
       maxbuffersize/4,  and  so  on until minbuffersize is reached.  MIN_BUFFER_SIZE is used for
       any remaining transfers if TRANSFER_SIZE is not evenly divisible by chunksize.

       Example: Using a MIN_BLOCK_SIZE of 1k, a MAX_BLOCK_SIZE of 8k and a TRANSFER_SIZE of  264k
       results  in  8  8k  read/writes,  16  4k  read/write,  32  2k  read/writes,  and 64 + 8 1k
       read/writes.

PATTERNS

       Use the following od(1) command to examine spew generated files  where  a  data  integrity
       problem has occurred:

       od -A d --format=d8 --width=32  <file>

FILES

       $HOME/.spewrc or $SPEWRC
              Holds  user  default  options.  These  options  precede any options included on the
              command-line.

       /etc/spew.conf
              Holds system-wide default options.  These options precede any options  included  on
              the command-line  and options included from $HOME/.spewrc or $SPEWRC.

AUTHOR

       Written by Andrew Patterson <andrew.patterson@hp.com>

REPORTING BUGS

       Report bugs to Andrew Patterson <andrew.patterson@hp.com>.

       Copyright 2007 Hewlett-Packard Corp.