Provided by: alliance_5.0-20120515-6_amd64 
NAME
RING - PAD RING router
SYNOPSIS
RING source result [ stat ]
DESCRIPTION
source defines two input files:
-- the file describing the input netlist (MBK_IN_LO(1) format).
example: source.al
-- the parameter file: source.rin
This file consists in 5 sections: 4 for the pad placement on circuit sides, one to
define the power sypply width (in lambda units).
example:
east () # none pad at east side.
north (
p_pck p_i0 p_i1
p_i3)
south (p_vssb p_vddb p_i2)
width (vss 50 vdd 80)
Separators (spaces, tabulations and new line) are allowed between instance names.
-- east(), north(), south(), west() define the relative pad order. They use the
pad instance names.
For the north() and south() sections, the instance name declaration are from the
left (first pad) to the right (last pad).
For the east() and west() sections, the instance name declaration are from the
bottom (first pad) to the top (last pad).
Any section may be missing. It means so the revalive side has no pad, however at
least one side must has one pad.
-- the width() section is optional and describes the power (vdd), and ground (vss)
track width.
result defines the output filename.
This file contains the layout of the routed circuit (MBK_OUT_PH(1) format).
example: result.ap
RING uses a pad library whose path directory is defined with the MBK_CATA_LIB(1)
environment variable. It also uses a catalog filename which is defined with the
MBK_CATAL_NAME(1) environment variable.
The catalog must contain all the pad model names used in the circuit. The core
model-name must not be present in the catalog.
Part of catalog file:
a2_y C
high_y C
pck_sp C
piot_sp C
pvssick_sp C
pvdde_sp C
pvddi_sp C
[stat] (optional parameter) defines another output file:
-- the statistic file: result.stat
It contains data about length (lambdas) and area (lambdas * lambdas) in ALU1 and
ALU2, for each equipotential. It describes how many vias were placed.
example: *** STATISTIC FILE < result.stat > ***
Equipotential list :
index| name |lgth A1|lgth A2|area A1|area A2| nb vias
_________________________________________________________
60 | vss | 9034 | 4408 | 614288| 454024| 1128
_________________________________________________________
59 | vdd | 7494 | 3968 | 574248| 408704| 1128
_________________________________________________________
54 | b2_coeur | 2253 | 1899 | 2253| 3798| 4
_________________________________________________________
Total length alu1 : 18781 (lambdas)
Total length alu2 : 10275 (lambdas)
Total area alu1 : 1190789 (lambdas * lambdas)
Total area alu2 : 866526 (lambdas * lambdas)
Total of vias : 2260
ENVIRONMENT VARIABLES
MBK_IN_LO(1) defines the input file format for the netlist.
MBK_IN_PH(1) defines the input file format for the layout.
MBK_OUT_PH(1) defines the output file format for the layout.
MBK_CATAL_NAME(1) defines the catalog filename.
MBK_CATA_LIB(1) defines the library pad cells directory.
MBK_WORK_LIB(1) defines the work directory.
USAGE
RING performs the physical routing between core of circuit and pad ring. RING is not a
floor plan router and allows only one core.
A core is designed, for example, with the standard cells placer ocp(1) and router nero(1),
which places the input and output connectors on the abutment box. The physical core
connectors must be separated by more than one pitch in any metal (in ALU1 or ALU2).
Netlist and layout views relative to the same figure must have the same name. For example,
the netlist core name and the routed core name.
RING performs an automatic placement of the pad ring and core. It is not necessary to
place pads, but only to describe their relative position on each side, in the parameter
file (source.rin).
Distance between the first track and any instance (pad or core) is the pitch so 5 lambdas.
EXAMPLE
Let chip.al be the circuit netlist and core.ap the routed core. 80 lambdas for supply
track width and the pad placement are described as follows.
chip.rin:
# This is a comment: 1 comment per line
north(p_a1 p_a2 p_a3 p_a4)
south(
p_i1 #another comment: the rest of the line
p_i2
p_i3
p_i4)
east(p_b4 p_b3 p_b2 p_b1)
west(p_f1 p_f2 p_f3 p_f4)
width(
vdd 80
vss 80
)
We want a ring of pads as follow:
+-------------------------------------------------+
| |p_a1|p_a2|p_a3|p_a4| |
|----+---------------------------------------+----|
|p_f4| |p_b1|
|----| +-------+ |----|
|p_f3| | | |p_b2|
|----| | CORE | |----|
|p_f2| | | |p_b3|
|----| +-------+ |----|
|p_f1| |p_b4|
|----+---------------------------------------+----|
| |p_i1|p_i2|p_i3|p_i4| |
+-------------------------------------------------+
In order to obtain the routed circuit (chipr.ap):
> ring chip chipr
SEE ALSO
genlib(1) lvx(1) ocp(1) nero(1) druc(1)
DIAGNOSTICS
Physical core must have at least one physical connector by side, otherwise it can't place
pads correctly, and maybe dump a core file.
Whenever lots of core connectors (bus) are placed close ones from each others, RING may
have problems to connect pad connectors placed just in front of them. In such a case, it
is recommended to not have pad connectors at that place and thus to place an instance pad
without connector (as pvdde_sp) or to cut the bus into several parts to let space between
connectors.
When core connectors are to close from corners, RING sometimes connects those one to
supply rings, to solve this bug, move core connectors or change pad placement. In any
case, use druc(1) or lvx(1) to detect problem.
Supply vdd and vss pads (resp. pvddi_sp and pvssi_sp) must be placed as close as possible
of the core side middle (i.e. not in the corners). Otherwise, RING cannot link supply pad
connector to ring supplies and exits with a error message.
Supply tracks from pads and core are connected at the supply ring. There is sometimes few
problems when core and pad tracks are opposite. Move pads usually corrects problem.