Provided by: sendip_2.5-5ubuntu1_amd64 bug

NAME

       sendip - Send arbitrary IP packets

SYNOPSIS

       sendip [-v] [-d data] [-h] [-f datafile] [-p module] [module options] hostname

OPTIONS

       -d data
              add  this  data  as a string to the end of the packet Data can be: rN to generate N
              random(ish) data bytes; 0x or 0X followed  by  hex  digits;  0  followed  by  octal
              digits; any other stream of bytes

       -f datafile
              read packet data from file

       -h     print this message

       -p module
              load the specified module (see below)

       -v     be verbose

       Modules  are  loaded in the order the -p option appears.  The headers from each module are
       put immediately inside the headers from the  previos  model  in  the  final  packet.   For
       example, to embed bgp inside tcp inside ipv4, do sendip -p ipv4 -p tcp -p bgp ....

   Modules available at compile time:
              ipv4 ipv6 icmp tcp udp bgp rip ntp

   Arguments for module ./bgp.so:
       -bm x  BGP Marker field (format is <hex byte>:<hex byte>:...)

              Default: FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF:FF

       -bl x  Packet length

              Default: Correct

       -bt x  Message Type (1 OPEN, 2 UPDATE, 3 NOTIFICATION, 4 KEEPALIVE

              Default: 4 (KEEPALIVE)

       -bo x  Open     message.      Format    is    <version>:<AS    number>:<Hold    time>:<BGP
              Identifier>:<Options length>

       Default: 4:1:90:127.0.0.1:Correct
              (Any parameter can be omitted to get the default)

       -boo x Optional OPEN parameter.  Format is <Type>:<Length>:<Value>   -  value  is  in  hex
              bytes separated by :s

              Default: Length may be omitted to get correct value

       -bul x Withdrawn routes length

              Default: Correct

       -buw x Withdrawn route.  Format is x.x.x.x/n:<bytes for prefix>

              Default: Bytes field may be omitted to use the correct number

       -bus x Attributes length

              Default: Correct

       -bua x Attribute.  Format is <flags>:<type>:<length length (1 or 2):<length>:<data>

              Default: The length fields may be omitted to use the correct value

       -bun x NLRI Prefix.  Format is as for -buw

              Default: As for -buw

       -bn x  Notification.  Format is <code>:<subcode>:<data>

              Default: Data may be omitted for no data

   Arguments for module ./icmp.so:
       -ct x  ICMP message type

              Default: ICMP_ECHO (8), or ICMP6_ECHO_REQUEST (128) if embedded in an IPv6 packet

       -cd x  ICMP code

              Default: 0

       -cc x  ICMP checksum

              Default: Correct

   Arguments for module ./ipv4.so:
       -is x  Source IP address (see README)

              Default: 127.0.0.1

       -id x  Destination IP address

              Default: Correct

       -ih x  IP header length (see README)

              Default: Correct

       -iv x  IP version (you almost definately don't want to change this)

              Default: 4

       -iy x  IP type of service

              Default: 0

       -il x  Total IP packet length (see README)

              Default: Correct

       -ii x  IP packet ID (see README)

              Default: Random

       -ifr x IP reservced flag (see README)

              Default: 0 (options are 0,1,r)

       -ifd x IP don't fragment flag (see README)

              Default: 0 (options are 0,1,r)

       -ifm x IP more fragments flag (see README)

              Default: 0 (options are 0,1,r)

       -if x  IP fragment offset

              Default: 0

       -it x  IP time to live

              Default: 255

       -ip x  IP protcol

              Default: 0, or set by underlying protocol

       -ic x  IP checksum (see README)

              Default: Correct

       -ionum x
              IP option as string of hex bytes (length is always correct)

              Default: (no options)

       -ioeol IP option: end of list

       -ionop IP option: no-op

       -iorr x
              IP option: record route. Format: pointer:addr1:addr2:...

       -iots x
              IP option: timestamp. Format: pointer:overflow:flag:(ip1:)ts1:(ip2:)ts2:...

       -iolsr x
              IP option: loose source route. Format: pointer:addr1:addr2:...

       -iosid x
              IP option: stream identifier

       -iossr x
              IP option: strict source route. Format: pointer:addr1:addr2:...

   Arguments for module ./ipv6.so:
       -6f x  IPv6 flow ID

              Default: 32

       -6t x  IPv6 traffic class

              Default: 0

       -6l x  IPv6 payload length

              Default: Correct

       -6n x  IPv6 next header

              Default: IPPROTO_NONE

       -6h x  IPv6 hop limit

              Default: 32

       -6v x  IP version (you probably don't want to change this

       -6p x  IPv6 priority

              Default: 0

       -6s x  IPv6 source address

              Default: ::1

       -6d x  IPv6 destination address

              Default: Correct

   Arguments for module ./rip.so:
       -rv x  RIP version

              Default: 2

       -rc x  RIP  command  (1=request,  2=response, 3=traceon (obsolete), 4=traceoff (obsolete),
              5=poll (undocumented), 6=poll entry (undocumented)

              Default: 1

       -re x  Add a RIP entry.  Format  is:  Address  family:route  tag:address:subnet  mask:next
              hop:metric

              Default: 2:0:0.0.0.0:255.255.255.0:0.0.0.0:16, any option my be left out to use the
              default

       -ra x  RIP authenticat packet, argument is the password; do not use any other RIP  options
              on this RIP header

       -rd    RIP  default  request - get router's entire routing table; do not use any other RIP
              options on this RIP header

   Arguments for module ./ripng.so:
       -Rv x  RIPng version

              Default: 1

       -Rc x  RIPng command (1=request, 2=response)

              Default: 1

       -Rr x  RIPng reserved field (should be 0)

              Default: 0

       -Re x  Add a RIPng entry.  Format is: Address/route tag/address/len/metric

              Default: ::/0/128/1, any option my be left out to use the default

       -Rd    RIPng default request - get router's entire routing table; do  not  use  any  other
              RIPng options on this RIPng header

   Arguments for module ./tcp.so:
       -ts x  TCP source port

              Default: 0

       -td x  TCP destination port

              Default: 0

       -tn x  TCP sequence number

              Default: Random

       -ta x  TCP ack number

              Default: 0

       -tt x  TCP data offset

              Default: Correct

       -tr x  TCP header reserved field EXCLUDING ECN and CWR bits

              Default: 0

       -tfe x TCP ECN bit (rfc2481)

              Default: 0 (options are 0,1,r)

       -tfc x TCP CWR bit (rfc2481)

              Default: 0 (options are 0,1,r)

       -tfu x TCP URG bit

              Default: 0, or 1 if -tu specified (options are 0,1,r)

       -tfa x TCP ACK bit

              Default: 0, or 1 if -ta specified (options are 0,1,r)

       -tfp x TCP PSH bit

              Default: 0 (options are 0,1,r)

       -tfr x TCP RST bit

              Default: 0 (options are 0,1,r)

       -tfs x TCP SYN bit

              Default: 1 (options are 0,1,r)

       -tff x TCP FIN bit

              Default: 0 (options are 0,1,r)

       -tw x  TCP window size

              Default: 65535

       -tc x  TCP checksum

              Default: Correct

       -tu x  TCP urgent pointer

              Default: 0

       -tonum x
              TCP option as string of hex bytes (length is always correct)

              Default: (no options)

       -toeol TCP option: end of list

       -tonop TCP option: no op

       -tomss x
              TCP option: maximum segment size

       -towscale x
              TCP option: window scale (rfc1323)

       -tosackok
              TCP option: allow selective ack (rfc2018)

       -tosack x
              TCP option: selective ack (rfc2018), format is l_edge1:r_edge1,l_edge2:r_edge2...

       -tots x
              TCP option: timestamp (rfc1323), format is tsval:tsecr

   Arguments for module ./udp.so:
       -us x  UDP source port

              Default: 0

       -ud x  UDP destination port

              Default: 0

       -ul x  UDP packet legnth

              Default: Correct

       -uc x  UDP checksum

              Default: Correct