Provided by: simulavr_0.1.2.2-6.2_amd64 bug

NAME

       simulavr - Atmel AVR simulator

SYNOPSIS

       simulavr [OPTIONS]... -d DEVICE [IMAGE]

DESCRIPTION

       Simulate  an  avr  device. The optional IMAGE file is loaded into the flash program memory
       space of the device.

   Options
       -h, --help
              Show this message

       -D, --debug
              Debug instruction output

       -v, --version
              Print out the version number and exit

       -g, --gdbserver
              Run as a gdbserver process

       -G, --gdb-debug
              Print out debug messages for gdbserver

       -p, --port <port>
              Listen for gdb connection on TCP port

       -d, --device <dev>
              Specify device type

       -e, --eeprom-image <img>
              Specify an eeprom image file

       -E, --eeprom-type <type>
              Specify the type of the eeprom image file

       -F, --flash-type <type>
              Specify the type of the flash image file

       -L, --list-devices
              Print supported devices to stdout and exit

       -P, --disp-prog <prog>
              Display register and memory info with prog

       -X, --without-xterm
              Don't start disp prog in an xterm

       -C, --core-dump
              Dump a core memory image to file on exit

       -c, --clock-freq <freq>
              Set the simulated mcu clock freqency (in Hz)

       -B, --breakpoint <addr>
              Set a breakpoint (address is a byte address)

       If the image file types for eeprom or flash images are not given, the default file type is
       binary.

       If  you  wish  to run the simulator in gdbserver mode, you do not have to specify a flash-
       image file since the program can be loaded from gdb via the `load` command.

       If '--port' option is given, and '--gdbserver' is not, port is ignored

       If running in gdbserver mode and port is not specified, a default port of 1212 is used.

       If using the '--breakpoint' option, note the simulator will terminate when the address  is
       hit  if  you  are  not  running  in  gdbserver  mode. This feature not intended for use in
       gdbserver mode. It is really intended for testing the simulator itself, but may be  useful
       for testing avr programs too.

   Currently available device types:
       Use the '--list-devices' option to obtain the list your version of simulavr supports.

               at90s1200
               at90s2313
               at90s4414
               at90s8515
               atmega8
               atmega16
               atmega103
               atmega128
               at43usb351
               at43usb353
               at43usb355
               at43usb320
               at43usb324
               at43usb325
               at43usb326

AUTHOR

       Written by Theodore A. Roth.

REPORTING BUGS

       Report bugs to <simulavr-devel@nongnu.org>

COPYRIGHT

       Copyright 2001, 2002, 2003  Theodore A. Roth.

       simulavr  is free software, covered by the GNU General Public License, and you are welcome
       to change it and/or distribute copies of it under the conditions of the GNU General Public
       License.

SEE ALSO

       http://savannah.nongnu.org/projects/simulavr/