Ubuntu Manpage: sinfo - view information about SLURM nodes and partitions.

NAME

       sinfo - view information about SLURM nodes and partitions.

SYNOPSIS

       sinfo [OPTIONS...]

DESCRIPTION

       sinfo is used to view partition and node information for a system running SLURM.

OPTIONS

-a, --all
Display information about all partitions. This causes information to be displayed about partitions
that are configured as hidden and partitions that are unavailable to user's group.

-b, --bgl
Display information about bglblocks (on Blue Gene systems only).

-d, --dead
If set only report state information for non-responding (dead) nodes.

-e, --exact
If set, do not group node information on multiple nodes unless their configurations to be reported
are identical. Otherwise cpu count, memory size, and disk space for nodes will be listed with the
minimum value followed by a "+" for nodes with the same partition and state (e.g., "250+").

-h, --noheader
Do not print a header on the output.

--help Print a message describing all sinfo options.

--hide Do not display information about hidden partitions. By default, partitions that are configured as
hidden or are not available to the user's group will not be displayed (i.e. this is the default
behavior).

-i <seconds>, --iterate=<seconds>
Print the state on a periodic basis. Sleep for the indicated number of seconds between reports.
By default, prints a time stamp with the header.

-l, --long
Print more detailed information. This is ignored if the --format option is specified.

-M, --clusters=<string>
Clusters to issue commands to. Multiple cluster names may be comma separated. A value of of
'all' will query to run on all clusters.

-n <nodes>, --nodes=<nodes>
Print information only about the specified node(s). Multiple nodes may be comma separated or
expressed using a node range expression. For example "linux[00-07]" would indicate eight nodes,
"linux00" through "linux07." Performance of the command can be measurably improved for systems
with large numbers of nodes when a single node name is specified.

-N, --Node
Print information in a node-oriented format. The default is to print information in a
partition-oriented format. This is ignored if the --format option is specified.

-o <output_format>, --format=<output_format>
Specify the information to be displayed using an sinfo format string. Format strings transparently
used by sinfo when running with various options are

default "%P %5a %.10l %.5D %6t %N"

--summarize "%P %5a %.10l %16F %N"

--long "%P %5a %.10l %.8s %4r %5h %10g %.5D %11T %N"

--Node "%N %.5D %9P %6t"

--long --Node "%N %.5D %9P %11T %.4c %.8z %.6m %.8d %.6w %8f %20E"

--list-reasons "%20E %9u %19H %N"

--long --list-reasons
"%20E %12U %19H %6t %N"

In the above format strings the use of "#" represents the maximum length of an node list to be
printed.

The field specifications available include:

%a State/availability of a partition

%A Number of nodes by state in the format "allocated/idle". Do not use this with a node state
option ("%t" or "%T") or the different node states will be placed on separate lines.

%B The max number of CPUs per node available to jobs in the partition.

%c Number of CPUs per node

%C Number of CPUs by state in the format "allocated/idle/other/total". Do not use this with a
node state option ("%t" or "%T") or the different node states will be placed on separate
lines.

%d Size of temporary disk space per node in megabytes

%D Number of nodes

%E The reason a node is unavailable (down, drained, or draining states).

%f Features associated with the nodes

%F Number of nodes by state in the format "allocated/idle/other/total". Do not use this with a
node state option ("%t" or "%T") or the different node states will be placed on separate
lines.

%g Groups which may use the nodes

%G Generic resources (gres) associated with the nodes

%h Jobs may share nodes, "yes", "no", or "force"

%H Print the timestamp of the reason a node is unavailable.

%l Maximum time for any job in the format "days-hours:minutes:seconds"

%L Default time for any job in the format "days-hours:minutes:seconds"

%m Size of memory per node in megabytes

%M PreemptionMode

%n List of node hostnames

%N List of node names

%o List of node communication addresses

%O CPU load of a node

%p Partition scheduling priority

%P Partition name followed by "*" for the default partition, also see %R

%r Only user root may initiate jobs, "yes" or "no"

%R Partition name, also see %P

%s Maximum job size in nodes

%S Allowed allocating nodes

%t State of nodes, compact form

%T State of nodes, extended form

%u Print the user name of who set the reason a node is unavailable.

%U Print the user name and uid of who set the reason a node is unavailable.

%w Scheduling weight of the nodes

%X Number of sockets per node

%Y Number of cores per socket

%Z Number of threads per core

%z Extended processor information: number of sockets, cores, threads (S:C:T) per node

%.<*>
right justification of the field

%<Number><*>
size of field

-p <partition>, --partition=<partition>
Print information only about the specified partition.

-r, --responding
If set only report state information for responding nodes.

-R, --list-reasons
List reasons nodes are in the down, drained, fail or failing state. When nodes are in these
states SLURM supports optional inclusion of a "reason" string by an administrator. This option
will display the first 35 characters of the reason field and list of nodes with that reason for
all nodes that are, by default, down, drained, draining or failing. This option may be used with
other node filtering options (e.g. -r, -d, -t, -n), however, combinations of these options that
result in a list of nodes that are not down or drained or failing will not produce any output.
When used with -l the output additionally includes the current node state.

-s, --summarize
List only a partition state summary with no node state details. This is ignored if the --format
option is specified.

-S <sort_list>, --sort=<sort_list>
Specification of the order in which records should be reported. This uses the same field
specification as the <output_format>. Multiple sorts may be performed by listing multiple sort
fields separated by commas. The field specifications may be preceded by "+" or "-" for ascending
(default) and descending order respectively. The partition field specification, "P", may be
preceded by a "#" to report partitions in the same order that they appear in SLURM's
configuration file, slurm.conf. For example, a sort value of "+P,-m" requests that records be
printed in order of increasing partition name and within a partition by decreasing memory size.
The default value of sort is "#P,-t" (partitions ordered as configured then decreasing node
state). If the --Node option is selected, the default sort value is "N" (increasing node name).

-t <states> , --states=<states>
List nodes only having the given state(s). Multiple states may be comma separated and the
comparison is case insensitive. Possible values include (case insensitive): ALLOC, ALLOCATED,
COMP, COMPLETING, DOWN, DRAIN (for node in DRAINING or DRAINED states), DRAINED, DRAINING, FAIL,
FAILING, IDLE, MAINT, NO_RESPOND, POWER_SAVE, UNK, and UNKNOWN. By default nodes in the specified
state are reported whether they are responding or not. The --dead and --responding options may be
used to filtering nodes by the responding flag.

-T, --reservation
Only display information about SLURM reservations.

--usage
Print a brief message listing the sinfo options.

-v, --verbose
Provide detailed event logging through program execution.

-V, --version
Print version information and exit.

OUTPUT FIELD DESCRIPTIONS

AVAIL Partition state: up or down.

CPUS Count of CPUs (processors) on each node.

S:C:T Count of sockets (S), cores (C), and threads (T) on these nodes.

SOCKETS
Count of sockets on these nodes.

CORES Count of cores on these nodes.

THREADS
Count of threads on these nodes.

GROUPS Resource allocations in this partition are restricted to the named groups. all indicates that all
groups may use this partition.

JOB_SIZE
Minimum and maximum node count that can be allocated to any user job. A single number indicates
the minimum and maximum node count are the same. infinite is used to identify partitions without
a maximum node count.

TIMELIMIT
Maximum time limit for any user job in days-hours:minutes:seconds. infinite is used to identify
partitions without a job time limit.

MEMORY Size of real memory in megabytes on these nodes.

NODELIST or BP_LIST (BlueGene systems only)
Names of nodes associated with this configuration/partition.

NODES Count of nodes with this particular configuration.

NODES(A/I)
Count of nodes with this particular configuration by node state in the form "available/idle".

NODES(A/I/O/T)
Count of nodes with this particular configuration by node state in the form
"available/idle/other/total".

PARTITION
Name of a partition. Note that the suffix "*" identifies the default partition.

ROOT Is the ability to allocate resources in this partition restricted to user root, yes or no.

SHARE Will jobs allocated resources in this partition share those resources. no indicates resources are
never shared. exclusive indicates whole nodes are dedicated to jobs (equivalent to srun
--exclusive option, may be used even with shared/cons_res managing individual processors). force
indicates resources are always available to be shared. yes indicates resource may be shared or
not per job's resource allocation.

STATE State of the nodes. Possible states include: allocated, completing, down, drained, draining,
fail, failing, idle, and unknown plus their abbreviated forms: alloc, comp, donw, drain, drng,
fail, failg, idle, and unk respectively. Note that the suffix "*" identifies nodes that are
presently not responding.

TMP_DISK
Size of temporary disk space in megabytes on these nodes.

NODE STATE CODES

Node state codes are shortened as required for the field size. If the node state code is followed by
"*", this indicates the node is presently not responding and will not be allocated any new work. If the
node remains non-responsive, it will be placed in the DOWN state (except in the case of COMPLETING,
DRAINED, DRAINING, FAIL, FAILING nodes).

If the node state code is followed by "~", this indicates the node is presently in a power saving mode
(typically running at reduced frequency). If the node state code is followed by "#", this indicates the
node is presently being powered up or configured.

ALLOCATED The node has been allocated to one or more jobs.

ALLOCATED+ The node is allocated to one or more active jobs plus one or more jobs are in the process of
COMPLETING.

COMPLETING All jobs associated with this node are in the process of COMPLETING. This node state will be
removed when all of the job's processes have terminated and the SLURM epilog program (if any)
has terminated. See the Epilog parameter description in the slurm.conf man page for more
information.

DOWN The node is unavailable for use. SLURM can automatically place nodes in this state if some
failure occurs. System administrators may also explicitly place nodes in this state. If a
node resumes normal operation, SLURM can automatically return it to service. See the
ReturnToService and SlurmdTimeout parameter descriptions in the slurm.conf(5) man page for
more information.

DRAINED The node is unavailable for use per system administrator request. See the update node
command in the scontrol(1) man page or the slurm.conf(5) man page for more information.

DRAINING The node is currently executing a job, but will not be allocated to additional jobs. The node
state will be changed to state DRAINED when the last job on it completes. Nodes enter this
state per system administrator request. See the update node command in the scontrol(1) man
page or the slurm.conf(5) man page for more information.

FAIL The node is expected to fail soon and is unavailable for use per system administrator
request. See the update node command in the scontrol(1) man page or the slurm.conf(5) man
page for more information.

FAILING The node is currently executing a job, but is expected to fail soon and is unavailable for
use per system administrator request. See the update node command in the scontrol(1) man
page or the slurm.conf(5) man page for more information.

IDLE The node is not allocated to any jobs and is available for use.

MAINT The node is currently in a reservation with a flag value of "maintenance" or is scheduled to
be rebooted.

UNKNOWN The SLURM controller has just started and the node's state has not yet been determined.

ENVIRONMENT VARIABLES

       Some  sinfo  options  may be set via environment variables. These environment variables, along with their
       corresponding options, are listed below. (Note: Commandline options will always override these settings.)

       SINFO_ALL           -a, --all

       SINFO_FORMAT        -o <output_format>, --format=<output_format>

       SINFO_PARTITION     -p <partition>, --partition=<partition>

       SINFO_SORT          -S <sort>, --sort=<sort>

       SLURM_CLUSTERS      Same as --clusters

       SLURM_CONF          The location of the SLURM configuration file.

       SLURM_TIME_FORMAT   Specify the format used to report time stamps.  A  value  of  standard,  the  default
                           value, generates output in the form "year-month-dateThour:minute:second".  A value of
                           relative  returns  only  "hour:minute:second" if the current day.  For other dates in
                           the current year  it  prints  the  "hour:minute"  preceded  by  "Tomorr"  (tomorrow),
                           "Ystday"  (yesterday),  the  name  of the day for the coming week (e.g. "Mon", "Tue",
                           etc.), otherwise the date (e.g. "25 Apr").  For other years it returns a  date  month
                           and year without a time (e.g.  "6 Jun 2012").  Another suggested value is "%a %T" for
                           a  day of week and time stamp (e.g.  "Mon 12:34:56"). All of the time stamps use a 24
                           hour format.

EXAMPLES

       Report basic node and partition configurations:

       > sinfo
       PARTITION AVAIL TIMELIMIT NODES STATE  NODELIST
       batch     up     infinite     2 alloc  adev[8-9]
       batch     up     infinite     6 idle   adev[10-15]
       debug*    up        30:00     8 idle   adev[0-7]

       Report partition summary information:

       > sinfo -s
       PARTITION AVAIL TIMELIMIT NODES(A/I/O/T) NODELIST
       batch     up     infinite 2/6/0/8        adev[8-15]
       debug*    up        30:00 0/8/0/8        adev[0-7]

       Report more complete information about the partition debug:

       > sinfo --long --partition=debug
       PARTITION AVAIL TIMELIMIT JOB_SIZE ROOT SHARE GROUPS NODES STATE NODELIST
       debug*    up        30:00        8 no   no    all        8 idle  dev[0-7]

       Report only those nodes that are in state DRAINED:

       > sinfo --states=drained
       PARTITION AVAIL NODES TIMELIMIT STATE  NODELIST
       debug*    up        2     30:00 drain  adev[6-7]

       Report node-oriented information with details and exact matches:

       > sinfo -Nel
       NODELIST    NODES PARTITION STATE  CPUS MEMORY TMP_DISK WEIGHT FEATURES REASON
       adev[0-1]       2 debug*    idle      2   3448    38536     16 (null)   (null)
       adev[2,4-7]     5 debug*    idle      2   3384    38536     16 (null)   (null)
       adev3           1 debug*    idle      2   3394    38536     16 (null)   (null)
       adev[8-9]       2 batch     allocated 2    246    82306     16 (null)   (null)
       adev[10-15]     6 batch     idle      2    246    82306     16 (null)   (null)

       Report only down, drained and draining nodes and their reason field:

       > sinfo -R
       REASON                              NODELIST
       Memory errors                       dev[0,5]
       Not Responding                      dev8

COPYING

       Copyright (C) 2002-2007 The Regents of the University of  California.   Produced  at  Lawrence  Livermore
       National Laboratory (cf, DISCLAIMER).
       Copyright (C) 2008-2009 Lawrence Livermore National Security.
       Copyright (C) 2010-2013 SchedMD LLC.

       This file is part of SLURM, a resource management program.  For details, see <http://slurm.schedmd.com/>.

       SLURM  is  free  software;  you  can  redistribute it and/or modify it under the terms of the GNU General
       Public License as published by the Free Software Foundation; either version 2 of the License, or (at your
       option) any later version.

       SLURM is distributed in the hope that it will be useful, but  WITHOUT  ANY  WARRANTY;  without  even  the
       implied  warranty  of  MERCHANTABILITY  or  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
       License for more details.