Provided by: snmp_5.7.2~dfsg-8.1ubuntu3.3_amd64 bug

NAME

       snmpcmd - options and behaviour common to most of the Net-SNMP command-line tools

SYNOPSIS

       snmpcmd [OPTIONS] AGENT [PARAMETERS]

DESCRIPTION

       This  manual  page  describes  the  common  options  for  the  SNMP commands: snmpbulkget,
       snmpbulkwalk,  snmpdelta,  snmpget,   snmpgetnext,   snmpnetstat,   snmpset,   snmpstatus,
       snmptable,   snmptest,  snmptrap,    snmpdf,  snmpusm  ,  snmpwalk  .   The  command  line
       applications use the SNMP protocol to communicate with an SNMP capable network entity,  an
       agent.  Individual applications typically (but not necessarily) take additional parameters
       that are given after the agent specification.  These  parameters  are  documented  in  the
       manual pages for each application.

COMMAND-LINE CONFIG OPTIONS

       In  addition  to the options described in this manual page, all of the tokens described in
       the snmp.conf and other .conf manual pages can be used on the  command  line  of  Net-SNMP
       applications    as    well    by    prefixing    them    with    "--".    EG,   specifying
       --dontLoadHostConfig=true on the command line will turn of loading of  the  host  specific
       configuration files.

       The  snmp.conf  file  settings  and  the  double-dash  arguments over-ride the single-dash
       arguments.  So it's important to note that if single-dash arguments aren't working because
       you  have  settings  in the snmp.conf file that conflict with them then you'll need to use
       the longer-form double-dash arguments to successfully trump the snmp.conf file settings.

Generic Options

       Thes options control how the Net-SNMP commands behave regardless of what version  of  SNMP
       you  are  using.   See  further  below  for options that control specific versions or sub-
       modules of the SNMP protocol.

       -d     Dump (in hexadecimal) the raw SNMP packets sent and received.

       -D[TOKEN[,...]]
              Turn on debugging output for the given TOKEN(s).  Try  ALL  for  extremely  verbose
              output.

       -h, --help
              Display a brief usage message and then exit.

       -H     Display  a list of configuration file directives understood by the command and then
              exit.

       -I [brRhu]
              Specifies input parsing options. See INPUT OPTIONS below.

       -L [eEfFoOsS]
              Specifies output logging options. See LOGGING OPTIONS below.

       -m MIBLIST
              Specifies a colon separated list of MIB  modules  (not  files)  to  load  for  this
              application.   This  overrides  (or  augments)  the  environment variable MIBS, the
              snmp.conf directive mibs, and the list of MIBs hardcoded into the Net-SNMP library.

              If MIBLIST has a leading '-' or '+' character, then  the  MIB  modules  listed  are
              loaded  in  addition  to  the  default  list,  coming  before  or  after  this list
              respectively.  Otherwise, the specified MIBs are loaded  instead  of  this  default
              list.

              The special keyword ALL is used to load all MIB modules in the MIB directory search
              list.  Every file whose name does not begin with "." will be parsed as if it were a
              MIB file.

       -M DIRLIST
              Specifies a colon separated list of directories to search for MIBs.  This overrides
              (or augments) the environment variable MIBDIRS, the  snmp.conf  directive  mibdirs,
              and    the    default    directory    hardcoded    into    the   Net-SNMP   library
              (/usr/share/snmp/mibs).

              If DIRLIST has a leading '-' or '+' character, then the given directories are added
              to  the  default  list, being searched before or after the directories on this list
              respectively.  Otherwise, the specified directories are searched  instead  of  this
              default list.

              Note  that  the  directories  appearing later in the list have have precedence over
              earlier ones.  To avoid searching any MIB directories, set the MIBDIRS  environment
              variable to the empty string ("").

              Note  that  MIBs  specified using the -m option or the mibs configuration directive
              will  be  loaded  from  one  of  the  directories  listed  by  the  -M  option  (or
              equivalents).   The  mibfile directive takes a full path to the specified MIB file,
              so this does not need to be in the MIB directory search list.

       -v 1 | 2c | 3
              Specifies the protocol version to use: 1 (RFCs 1155-1157), 2c (RFCs 1901-1908),  or
              3  (RFCs 2571-2574).  The default is typically version 3.  Overrides the defVersion
              token in the snmp.conf file.   -O  [abeEfnqQsStTuUvxX]  Specifies  output  printing
              options. See OUTPUT OPTIONS below.

       -P [cdeRuwW]
              Specifies MIB parsing options.  See MIB PARSING OPTIONS below.

       -r retries
              Specifies the number of retries to be used in the requests. The default is 5.

       -t timeout
              Specifies the timeout in seconds between retries. The default is 1.  Floating point
              numbers can be used to specify fractions of seconds.

       -V, --version
              Display version information for the application and then exit.

       -Yname="value"

       --name="value"
              Allows one to specify any token ("name") supported in the snmp.conf file  and  sets
              its  value to "value". Overrides the corresponding token in the snmp.conf file. See
              snmp.conf(5) for the full list of tokens.

SNMPv3 Options

       The following options are generic to all forms of SNMPv3, regardless of whether  it's  the
       original SNMPv3 with USM or the newer SNMPv3 over (D)TLS support.

       -l secLevel
              Set  the securityLevel used for SNMPv3 messages (noAuthNoPriv|authNoPriv|authPriv).
              Appropriate  pass  phrase(s)  must  provided  when  using  any  level  higher  than
              noAuthNoPriv.  Overrides the defSecurityLevel token in the snmp.conf file.

       -n contextName
              Set the contextName used for SNMPv3 messages.  The default contextName is the empty
              string "".  Overrides the defContext token in the snmp.conf file.

SNMPv3 over TLS Options

       These options pass transport-specific parameters to the TLS layer.  If you're  using  SNMP
       over  TLS  or DTLS you'll need to pass a combination of these either through these command
       line options or through snmp.conf configuration tokens.

       A note about <certificate-specifier>s : Net-SNMP looks for X.509 certificates in  each  of
       the  normal  SNMP configuration directory search paths under a "tls" subdirectory.  IE, it
       will  look  in  ~/.snmp/tls  and  in  /usr/local/share/snmp/tls  for  certificates.    The
       certificate  components  (eg, the public and private halves) are stored in sub-directories
       underneath this root  set  of  directories.   See  the  net-snmp-cert  tool  for  help  in
       importing,  creating  and  managing  Net-SNMP  certificates.  <certificate-specifier>s can
       reference either a fingerprint of the certificate to use (the net-snmp-cert tool can  help
       you  figure  out  the certificates) or the filename's prefix can be used.  For example, if
       you had a "snmpd.crt" certificate file then you could simply refer to the certificate  via
       the "snmpd" specifier.

       -T localCert=<certificate-specifier>
              Indicates  to  the  transport  which  key  should be used to initiate (D)TLS client
              connections.  This would typically be a certificate  found  using  the  certificate
              fingerprint,   the   application  name  (eg  snmpd,  snmptrapd,  perl,  python)  or
              genericized name "snmpapp" if using  one  of  the  generic  applications  (snmpget,
              snmpwalk,  etc).  This can also be set using the localCert specifier in a snmp.conf
              configuration file.

       -T peerCert=<certificate-specifier>
              If you expect a particular certificate to be presented by the other side  then  you
              can  use this specifier to indicate the certificate it should present.  If it fails
              to present the expected certificate the client will refuse to open  the  connection
              (because  doing  otherwise could lead to man-in-the-middle attacks).  This can also
              be set using the peerCert specifier in a snmp.conf configuration file.

       -T trust_cert=<certificate-specifier>
              If you have a trusted CA certificate you wish to anchor trust  with,  you  can  use
              this flag to load a given certificate as a trust anchor.  A copy of the certificate
              must exist within the Net-SNMP certificate storage system or this must point  to  a
              complete path name.  Also see the "trustCert" snmp.conf configuration token.

       -T their_hostname=<name>
              If  the  server's presented certificate can be validating using a trust anchor then
              their hostname will be checked to ensure their presented hostname matches one  that
              is  expected  (you  don't  want  to  connect  to  goodhost.example.com and accept a
              certificate presented by badhost.example.com do you?).  This token can specify  the
              exact  host  name  expected  to  be  presented  by  the  remote  side,  either in a
              subjectAltName field or in the CommonName field of the server's X.509 certificate.

SNMPv3 with USM Options

       These options are specific to using SNMPv3 with the  original  User-based  Security  Model
       (USM).

       -3[MmKk]  0xHEXKEY
              Sets  the  keys to be used for SNMPv3 transactions.  These options allow you to set
              the master authentication and encryption keys (-3m and -3M respectively) or set the
              localized  authentication  and  encryption keys (-3k and -3K respectively).  SNMPv3
              keys can be either passed in by hand using these flags,  or  by  the  use  of  keys
              generated  from  passwords  using the -A and -X flags discussed below.  For further
              details on SNMPv3 and its usage of keying information, see  the  Net-SNMP  tutorial
              web   site   (   http://www.Net-SNMP.org/tutorial-5/commands/   ).   Overrides  the
              defAuthMasterKey  (-3m),  defPrivMasterKey  (-3M),  defAuthLocalizedKey  (-3k)   or
              defPrivLocalizedKey   (-3K)  tokens,  respectively,  in  the  snmp.conf  file,  see
              snmp.conf(5).

       -a authProtocol
              Set the  authentication  protocol  (MD5  or  SHA)  used  for  authenticated  SNMPv3
              messages. Overrides the defAuthType token in the snmp.conf file.

       -A authPassword
              Set  the  authentication  pass  phrase  used  for  authenticated  SNMPv3  messages.
              Overrides the defAuthPassphrase token in the snmp.conf  file.  It  is  insecure  to
              specify pass phrases on the command line, see snmp.conf(5).

       -e engineID
              Set  the  authoritative (security) engineID used for SNMPv3 REQUEST messages, given
              as a hexadecimal string  (optionally  prefixed  by  "0x").   It  is  typically  not
              necessary   to   specify   this  engine  ID,  as  it  will  usually  be  discovered
              automatically.

       -E engineID
              Set the context engineID used for SNMPv3 REQUEST messages  scopedPdu,  given  as  a
              hexadecimal  string.   If  not  specified,  this  will default to the authoritative
              engineID.

       -u secName
              Set the  securityName  used  for  authenticated  SNMPv3  messages.   Overrides  the
              defSecurityName token in the snmp.conf file.

       -x privProtocol
              Set  the  privacy  protocol  (DES  or  AES)  used  for  encrypted  SNMPv3 messages.
              Overrides the defPrivType token in the snmp.conf file. This option is only valid if
              the Net-SNMP software was build to use OpenSSL.

       -X privPassword
              Set  the  privacy  pass  phrase  used for encrypted SNMPv3 messages.  Overrides the
              defPrivPassphrase token in the snmp.conf file.  It  is  insecure  to  specify  pass
              phrases on the command line, see snmp.conf(5).

       -Z boots,time
              Set  the  engineBoots  and engineTime used for authenticated SNMPv3 messages.  This
              will initialize the local notion of the agents  boots/time  with  an  authenticated
              value  stored in the LCD.  It is typically not necessary to specify this option, as
              these values will usually be discovered automatically.

SNMPv1 and SNMPv2c Options

       -c community
              Set the community string for SNMPv1/v2c transactions.  Overrides  the  defCommunity
              token in the snmp.conf file.

AGENT SPECIFICATION

       The  string  AGENT  in  the  SYNOPSIS above specifies the remote SNMP entity with which to
       communicate.  This specification takes the form:

              [<transport-specifier>:]<transport-address>

       At its simplest, the AGENT specification may consist of a hostname, or an IPv4 address  in
       the  standard "dotted quad" notation.  In this case, communication will be attempted using
       UDP/IPv4 to port 161 of the given host.  Otherwise, the <transport-address>  part  of  the
       specification is parsed according to the following table:

           <transport-specifier>       <transport-address> format

           udp                         hostname[:port] or IPv4-address[:port]

           tcp                         hostname[:port] or IPv4-address[:port]

           unix                        pathname

           ipx                         [network]:node[/port]

           aal5pvc or pvc              [interface.][VPI.]VCI

           udp6 or udpv6 or udpipv6    hostname[:port] or IPv6-address:port or
                                        '['IPv6-address']'[:port]

           tcp6 or tcpv6 or tcpipv6    hostname[:port] or IPv6-address:port or
                                        '['IPv6-address']'[:port]

       Note  that  <transport-specifier> strings are case-insensitive so that, for example, "tcp"
       and "TCP" are equivalent.  Here are some examples, along with their interpretation:

       hostname:161            perform query using UDP/IPv4 datagrams to hostname  on  port  161.
                               The  ":161"  is redundant here since that is the default SNMP port
                               in any case.

       udp:hostname            identical to the previous specification.  The "udp:" is  redundant
                               here since UDP/IPv4 is the default transport.

       TCP:hostname:1161       connect  to hostname on port 1161 using TCP/IPv4 and perform query
                               over that connection.  udp6:hostname:10161 perform the query using
                               UDP/IPv6 datagrams to port 10161 on hostname (which will be looked
                               up as an AAAA record).

       UDP6:[fe80::2d0:b7ff:fe21:c6c0]
                               perform the query using UDP/IPv6 datagrams to port 161 at  address
                               fe80::2d0:b7ff:fe21:c6c0.

       tcpipv6:[::1]:1611      connect  to  port  1611  on  the local host (::1 in IPv6 parlance)
                               using TCP/IPv6 and perform query over that connection.

       tls:hostname:10161

       dtls:hostname:10161     Connects using SNMP over DTLS or TLS as  documented  by  the  ISMS
                               working group (RFCs not yet published as of this date).  This will
                               require (and automatically ensures) that the TSM security model is
                               in  use.   You'll  also  need  to  set  up  trust  paths  for  the
                               certificates presented by the server (see above  for  descriptions
                               of this).

       ssh:hostname:22         Connects  using  SNMP  over  SSH as documented by the ISMS working
                               group (RFCs not yet published as of this date).  This will require
                               that the TSM security model is in use (--defSecurityModel=tsm).

       ipx::00D0B7AAE308       perform  query  using IPX datagrams to node number 00D0B7AAE308 on
                               the default network, and using the default IPX port of 36879 (900F
                               hexadecimal), as suggested in RFC 1906.

       ipx:0AE43409:00D0B721C6C0/1161
                               perform  query  using  IPX  datagrams  to port 1161 on node number
                               00D0B721C6C0 on network number 0AE43409.

       unix:/tmp/local-agent   connect to the Unix domain socket  /tmp/local-agent,  and  perform
                               the query over that connection.

       /tmp/local-agent        identical  to the previous specification, since the Unix domain is
                               the default transport iff the first character of  the  <transport-
                               address> is a '/'.

       alias:myname            perform a connection to the myname alias which needs to be defined
                               in  the  snmp.conf  file  using  a  line  like  "   alias   myname
                               udp:127.0.0.1:9161  ".   Any  type  of transport definition can be
                               used as the alias expansion parameter.  Aliases  are  particularly
                               useful for using repeated complex transport strings.

       AAL5PVC:100             perform  the  query  using AAL5 PDUs sent on the permanent virtual
                               circuit with VPI=0 and VCI=100 (decimal) on the first ATM  adapter
                               in the machine.

       PVC:1.10.32             perform  the  query  using AAL5 PDUs sent on the permanent virtual
                               circuit with VPI=10 (decimal) and VCI=32 (decimal) on  the  second
                               ATM  adapter  in  the  machine.   Note that "PVC" is a synonym for
                               "AAL5PVC".

       Note that not all the transport  domains  listed  above  will  always  be  available;  for
       instance, hosts with no IPv6 support will not be able to use udp6 transport addresses, and
       attempts to do so will result in the error  "Unknown  host".   Likewise,  since  AAL5  PVC
       support  is  only  currently available on Linux, it will fail with the same error on other
       platforms.

MIB PARSING OPTIONS

       The Net-SNMP MIB parser mostly adheres to the Structure of Management  Information  (SMI).
       As that specification has changed through time, and in recognition of the (ahem) diversity
       in compliance expressed in MIB files,  additional  options  provide  more  flexibility  in
       reading MIB files.

       -Pc    Toggles  whether  ASN.1  comments  should extend to the end of the MIB source line.
              Strictly speaking, a second appearance of "--" should terminate  the  comment,  but
              this  breaks  some  MIB  files.   The  default  behaviour  (to  interpret  comments
              correctly) can also be set with the configuration token commentToEOL.

       -Pd    Disables the loading of MIB object  DESCRIPTIONs  when  parsing  MIB  files.   This
              reduces the amount of memory used by the running application.

       -Pe    Toggles  whether  to show errors encountered when parsing MIB files.  These include
              references to IMPORTed modules and MIB objects that cannot be located  in  the  MIB
              directory   search   list.   The  default  behaviour  can  also  be  set  with  the
              configuration token showMibErrors.

       -PR    If the same MIB object (parent name and sub-identifier) appears multiple  times  in
              the  list  of  MIB  definitions  loaded,  use  the  last version to be read in.  By
              default, the first version will  be  used,  and  any  duplicates  discarded.   This
              behaviour can also be set with the configuration token mibReplaceWithLatest.

              Such ordering is normally only relevant if there are two MIB files with conflicting
              object definitions for the same OID (or different revisions of the same  basic  MIB
              object).

       -Pu    Toggles  whether  to  allow  the  underline character in MIB object names and other
              symbols.  Strictly speaking, this is not valid SMI  syntax,  but  some  vendor  MIB
              files  define  such  names.   The  default  behaviour  can  also  be  set  with the
              configuration token mibAllowUnderline.

       -Pw    Show various warning messages in parsing MIB files and  building  the  overall  OID
              tree.  This can also be set with the configuration directive mibWarningLevel 1

       -PW    Show  some  additional  warning messages, mostly relating to parsing individual MIB
              objects.  This can also be set with the configuration directive mibWarningLevel 2

OUTPUT OPTIONS

       The format of the output from SNMP commands can be controlled using various parameters  of
       the  -O  flag.   The  effects  of  these  sub-options  can  be seen by comparison with the
       following default output (unless otherwise specified):
              $ snmpget -c public -v 1 localhost sysUpTime.0
              SNMPv2-MIB::sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63

       -Oa    Display string values as ASCII strings (unless there is a DISPLAY-HINT defined  for
              the  corresponding  MIB  object).   By  default,  the library attempts to determine
              whether the value is a printable or binary string, and displays it accordingly.

              This option does not affect objects that do have a Display Hint.

       -Ob    Display table indexes numerically, rather than trying  to  interpret  the  instance
              subidentifiers as string or OID values:
                  $ snmpgetnext -c public -v 1 localhost vacmSecurityModel
                  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0."wes" = xxx
                  $ snmpgetnext -c public -v 1 -Ob localhost vacmSecurityModel
                  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0.3.119.101.115 = xxx

       -Oe    Removes the symbolic labels from enumeration values:
                  $ snmpget -c public -v 1 localhost ipForwarding.0
                  IP-MIB::ipForwarding.0 = INTEGER: forwarding(1)
                  $ snmpget -c public -v 1 -Oe localhost ipForwarding.0
                  IP-MIB::ipForwarding.0 = INTEGER: 1

       -OE    Modifies index strings to escape the quote characters:
                  $ snmpgetnext -c public -v 1 localhost vacmSecurityModel
                  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0."wes" = xxx
                  $ snmpgetnext -c public -v 1 -OE localhost vacmSecurityModel
                  SNMP-VIEW-BASED-ACM-MIB::vacmSecurityModel.0.\"wes\" = xxx

              This allows the output to be reused in shell commands.

       -Of    Include the full list of MIB objects when displaying an OID:
                  .iso.org.dod.internet.mgmt.mib-2.system.sysUpTime.0 =
                             Timeticks: (14096763) 1 day, 15:09:27.63

       -On    Displays the OID numerically:
                  .1.3.6.1.2.1.1.3.0 = Timeticks: (14096763) 1 day, 15:09:27.63

       -Oq    Removes the equal sign and type information when displaying varbind values:
                  SNMPv2-MIB::sysUpTime.0 1:15:09:27.63

       -OQ    Removes the type information when displaying varbind values:
                  SNMPv2-MIB::sysUpTime.0 = 1:15:09:27.63

       -Os    Display the MIB object name (plus any instance or other subidentifiers):
                  sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63

       -OS    Display the name of the MIB, as well as the object name:
                  SNMPv2-MIB::sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63

              This is the default OID output format.

       -Ot    Display TimeTicks values as raw numbers:
                  SNMPv2-MIB::sysUpTime.0 = 14096763

       -OT    If values are printed as Hex strings, display a printable version as well.

       -Ou    Display  the  OID  in  the  traditional  UCD-style (inherited from the original CMU
              code).  That means removing a series of  "standard"  prefixes  from  the  OID,  and
              displaying the remaining list of MIB object names (plus any other subidentifiers):
                  system.sysUpTime.0 = Timeticks: (14096763) 1 day, 15:09:27.63

       -OU    Do not print the UNITS suffix at the end of the value.

       -Ov    Display the varbind value only, not the OID:
                  $ snmpget -c public -v 1 -Ov localhost ipForwarding.0
                  INTEGER: forwarding(1)

       -Ox    Display  string  values  as Hex strings (unless there is a DISPLAY-HINT defined for
              the corresponding MIB object).  By  default,  the  library  attempts  to  determine
              whether the value is a printable or binary string, and displays it accordingly.

              This option does not affect objects that do have a Display Hint.

       -OX    Display  table  indexes  in  a  more "program like" output, imitating a traditional
              array-style index format:
                  $ snmpgetnext -c public -v 1 localhost ipv6RouteTable
                  IPv6-MIB::ipv6RouteIfIndex.63.254.1.0.255.0.0.0.0.0.0.0.0.0.0.0.64.1 = INTEGER: 2
                  $ snmpgetnext -c public -v 1 -OX localhost ipv6RouteTable
                  IPv6-MIB::ipv6RouteIfIndex[3ffe:100:ff00:0:0:0:0:0][64][1] = INTEGER: 2

       Most of  these  options  can  also  be  configured  via  configuration  tokens.   See  the
       snmp.conf(5) manual page for details.

LOGGING OPTIONS

       The  mechanism  and  destination  to  use for logging of warning and error messages can be
       controlled by passing various parameters to the -L flag.

       -Le    Log messages to the standard error stream.

       -Lf FILE
              Log messages to the specified file.

       -Lo    Log messages to the standard output stream.

       -Ls FACILITY
              Log messages via syslog, using the specified facility ('d' for LOG_DAEMON, 'u'  for
              LOG_USER, or '0'-'7' for LOG_LOCAL0 through LOG_LOCAL7).

       There  are  also  "upper  case"  versions  of  each  of  these  options,  which  allow the
       corresponding logging mechanism to be restricted to certain priorities of message.   Using
       standard error logging as an example:

       -LE pri
              will log messages of priority 'pri' and above to standard error.

       -LE p1-p2
              will  log  messages  with  priority  between  'p1' and 'p2' (inclusive) to standard
              error.

       For -LF and -LS the priority specification comes before the file or facility  token.   The
       priorities recognised are:

              0 or !  for LOG_EMERG,
              1 or a for LOG_ALERT,
              2 or c for LOG_CRIT,
              3 or e for LOG_ERR,
              4 or w for LOG_WARNING,
              5 or n for LOG_NOTICE,
              6 or i for LOG_INFO, and
              7 or d for LOG_DEBUG.

       Normal output is (or will be!) logged at a priority level of LOG_NOTICE

INPUT OPTIONS

       The  interpretation  of input object names and the values to be assigned can be controlled
       using various parameters of the -I flag.  The default behaviour will be described  at  the
       end of this section.

       -Ib    specifies  that the given name should be regarded as a regular expression, to match
              (case-insensitively) against object names in the MIB tree.  The "best"  match  will
              be  used  -  calculated as the one that matches the closest to the beginning of the
              node  name  and  the  highest  in  the  tree.   For   example,   the   MIB   object
              vacmSecurityModel  could be matched by the expression vacmsecuritymodel (full name,
              but different case), or vacm.*model (regexp pattern).

              Note that '.' is a  special  character  in  regular  expression  patterns,  so  the
              expression  cannot specify instance subidentifiers or more than one object name.  A
              "best match" expression will only be applied against single MIB object names.   For
              example,  the  expression  sys*ontact.0  would  not match the instance sysContact.0
              (although sys*ontact would match sysContact).  Similarly, specifying a  MIB  module
              name will not succeed (so SNMPv2-MIB::sys.*ontact would not match either).

       -Ih    disables  the  use  of  DISPLAY-HINT information when assigning values.  This would
              then require providing the raw value:
                  snmpset ... HOST-RESOURCES-MIB::hrSystemDate.0
                                  x "07 D2 0C 0A 02 04 06 08"
              instead of a formatted version:
                  snmpset ... HOST-RESOURCES-MIB::hrSystemDate.0
                                  = 2002-12-10,2:4:6.8

       -Ir    disables checking table indexes and the value to be assigned against  the  relevant
              MIB  definitions.   This  will  (hopefully) result in the remote agent reporting an
              invalid request, rather than checking (and rejecting) this before it is sent to the
              remote agent.

              Local  checks are more efficient (and the diagnostics provided also tend to be more
              precise), but disabling this behaviour is  particularly  useful  when  testing  the
              remote agent.

       -IR    enables "random access" lookup of MIB names.  Rather than providing a full OID path
              to the desired MIB object (or qualifying this object with an  explicit  MIB  module
              name),  the  MIB  tree  will  be  searched  for  the  matching  object  name.  Thus
              .iso.org.dod.internet.mib-2.system.sysDescr.0 (or  SNMPv2-MIB::sysDescr.0)  can  be
              specified simply as sysDescr.0.

              Warning:
                     Since  MIB  object names are not globally unique, this approach may return a
                     different MIB object depending on which MIB files have been loaded.

              The MIB-MODULE::objectName syntax has  the  advantage  of  uniquely  identifying  a
              particular  MIB object, as well as being slightly more efficient (and automatically
              loading the necessary MIB file if necessary).

       -Is SUFFIX
              adds the specified suffix to each textual OID given on the command line.  This  can
              be  used to retrieve multiple objects from the same row of a table, by specifying a
              common index value.

       -IS PREFIX
              adds the specified prefix to each textual OID given on the command line.  This  can
              be  used to specify an explicit MIB module name for all objects being retrieved (or
              for incurably lazy typists).

       -Iu    enables the traditional  UCD-style  approach  to  interpreting  input  OIDs.   This
              assumes  that  OIDs  are rooted at the 'mib-2' point in the tree (unless they start
              with an explicit '.' or include a MIB module name).  So the sysDescr instance above
              would be referenced as system.sysDescr.0.

       Object  names  specified  with  a  leading '.' are always interpreted as "fully qualified"
       OIDs, listing the sequence of MIB objects from the root of the MIB tree.  Such objects and
       those  qualified  by  an  explicit  MIB module name are unaffected by the -Ib, -IR and -Iu
       flags.

       Otherwise, if none of the above input options are specified, the default behaviour  for  a
       "relative"  OID  is  to  try and interpret it as an (implicitly) fully qualified OID, then
       apply "random access" lookup (-IR), followed by "best match" pattern matching (-Ib).

ENVIRONMENT VARIABLES

       PREFIX The standard prefix for object identifiers (when using UCD-style output).  Defaults
              to .iso.org.dod.internet.mgmt.mib-2

       MIBS   The  list  of  MIBs  to  load. Defaults to SNMPv2-TCSNMPv2-MIB:IF-MIB:IP-MIBTCP-MIB
              UDP-MIBSNMP-VACM-MIB.  Overridden by the -m option.

       MIBDIRS
              The list of directories to  search  for  MIBs.  Defaults  to  /usr/share/snmp/mibs.
              Overridden by the -M option.

FILES

       /etc/snmp/snmpd.conf
              Agent configuration file. See snmpd.conf(5).

       /etc/snmp/snmp.conf

       ~/.snmp/snmp.conf
              Application configuration files. See snmp.conf(5).

SEE ALSO

       snmpget(1),  snmpgetnext(1),  snmpset(1),  snmpbulkget(1),  snmpbulkwalk(1),  snmpwalk(1),
       snmptable(1),  snmpnetstat(1),  snmpdelta(1),  snmptrap(1),   snmpinform(1),   snmpusm(1),
       snmpstatus(1), snmptest(1), snmp.conf(5).