NAME

       Generate - Generate Target deviceb test chart color values.

DESCRIPTION

       Generate  Target  deviceb  test  chart color values, Version 1.5.1 Author: Graeme W. Gill,
       licensed under the AGPL Version 3 usage: targen [options] outfile

              Diagnostic: Usage requested

       -v [level]
              Verbose mode [optional level 1..N]

       -d col_comb
              choose colorant combination from the following: 0: Print  grey  1:  Video  grey  2:
              Print  RGB  3:  Video  RGB 4: CMYK 5: CMY 6: CMYK + Light CM 7: CMYK + Light CMK 8:
              CMYK + Red + Blue 9: CMYK + Orange + Green 10: CMYK + Light CMK + Light Light K 11:
              CMYK + Orange + Green + Light CM 12: CMYK + Light CM + Medium CM

       -D colorant
              Add or delete colorant from combination: (Use -?? to list known colorants)

       -G     Generate good optimized points rather than Fast

       -e patches
              White test patches (default 4)

       -s steps
              Single channel steps (default grey 50, color 0)

       -g steps
              Grey axis RGB or CMY steps (default 0)

       -m steps
              Multidimensional device space cube steps (default 0)

       -f patches
              Add  iterative  & adaptive full spread patches to total (default grey 0, color 836)
              Default is Optimised Farthest Point Sampling (OFPS)

       -t     Use incremental far point for full spread

       -r     Use device space random for full spread

       -R     Use perceptual space random for full spread

       -q     Use device space-filling quasi-random for full spread

       -Q     Use perceptual space-filling quasi-random for full spread

       -i     Use device space body centered cubic grid for full spread

       -I     Use perceptual space body centered cubic grid for full spread

       -a angle
              Simplex grid angle 0.0 - 0.5 for B.C.C. grid, default 0.333300

       -A adaptation
              Degree of adaptation of OFPS 0.0 - 1.0 (default 0.1, -c profile used 1.0)

       -l ilimit
              Total ink limit in % (default = none)

       -p power
              Optional power-like value applied to all device values.

       -c profile
              Optional device ICC or MPP pre-conditioning profile filename (Use  "none"  to  turn
              off any conditioning)

       -N emphasis
              Degree of neutral axis patch concentration 0.0-1.0 (default 0.50)

       -F L,a,b,rad
              Filter out samples outside Lab sphere.

       -w     Dump diagnostic outfilel.wrl file (Lab locations)

       -W     Dump diagnostic outfiled.wrl file (Device locations)

       outfile
              Base name for output(.ti1)

       Author: Graeme W. Gill, licensed under the AGPL Version 3 usage: targen [options] outfile

              Diagnostic: Usage requested

       -v [level]
              Verbose mode [optional level 1..N]

       -d col_comb
              choose  colorant  combination  from  the  following: 0: Print grey 1: Video grey 2:
              Print RGB 3: Video RGB 4: CMYK 5: CMY 6: CMYK + Light CM 7: CMYK  +  Light  CMK  8:
              CMYK + Red + Blue 9: CMYK + Orange + Green 10: CMYK + Light CMK + Light Light K 11:
              CMYK + Orange + Green + Light CM 12: CMYK + Light CM + Medium CM

       -D colorant
              Add or delete colorant from combination: (Use -?? to list known colorants)

       -G     Generate good optimized points rather than Fast

       -e patches
              White test patches (default 4)

       -s steps
              Single channel steps (default grey 50, color 0)

       -g steps
              Grey axis RGB or CMY steps (default 0)

       -m steps
              Multidimensional device space cube steps (default 0)

       -f patches
              Add iterative & adaptive full spread patches to total (default grey 0,  color  836)
              Default is Optimised Farthest Point Sampling (OFPS)

       -t     Use incremental far point for full spread

       -r     Use device space random for full spread

       -R     Use perceptual space random for full spread

       -q     Use device space-filling quasi-random for full spread

       -Q     Use perceptual space-filling quasi-random for full spread

       -i     Use device space body centered cubic grid for full spread

       -I     Use perceptual space body centered cubic grid for full spread

       -a angle
              Simplex grid angle 0.0 - 0.5 for B.C.C. grid, default 0.333300

       -A adaptation
              Degree of adaptation of OFPS 0.0 - 1.0 (default 0.1, -c profile used 1.0)

       -l ilimit
              Total ink limit in % (default = none)

       -p power
              Optional power-like value applied to all device values.

       -c profile
              Optional  device  ICC  or MPP pre-conditioning profile filename (Use "none" to turn
              off any conditioning)

       -N emphasis
              Degree of neutral axis patch concentration 0.0-1.0 (default 0.50)

       -F L,a,b,rad
              Filter out samples outside Lab sphere.

       -w     Dump diagnostic outfilel.wrl file (Lab locations)

       -W     Dump diagnostic outfiled.wrl file (Device locations)

       outfile
              Base name for output(.ti1)

Generate Target deviceb test chart color vaAugustV2013on 1.5.1                        GENERATE(1)