Provided by: wireshark-qt_2.6.6-1~ubuntu14.04.0_amd64 
NAME
wireshark - Interactively dump and analyze network traffic
SYNOPSIS
wireshark [ -a <capture autostop condition> ] ... [ -b <capture ring buffer option> ] ...
[ -B <capture buffer size> ] [ -c <capture packet count> ] [ -C <configuration profile> ]
[ -d <layer type>==<selector>,<decode-as protocol> ] [ -D ] [ --display=<X display to use> ]
[ -f <capture filter> ] [ --fullscreen ] [ -g <packet number> ] [ -h ] [ -H ]
[ -i <capture interface>|- ] [ -I ] [ -j ] [ -J <jump filter> ] [ -k ] [ -K <keytab> ] [ -l ] [ -L ]
[ -m <font> ] [ -n ] [ -N <name resolving flags> ] [ -o <preference/recent setting> ] ... [ -p ]
[ -P <path setting>] [ -r <infile> ] [ -R <read (display) filter> ] [ -s <capture snaplen> ] [ -S ]
[ -t a|ad|adoy|d|dd|e|r|u|ud|udoy ] [ -v ] [ -w <outfile> ] [ -X <eXtension option> ]
[ -y <capture link type> ] [ -Y <displaY filter> ] [ -z <statistics> ] [ --enable-protocol <proto_name> ]
[ --disable-protocol <proto_name> ] [ --enable-heuristic <short_name> ]
[ --disable-heuristic <short_name> ] [ --list-time-stamp-types ] [ --time-stamp-type <type> ]
[ <infile> ]
DESCRIPTION
Wireshark is a GUI network protocol analyzer. It lets you interactively browse packet data from a live
network or from a previously saved capture file. Wireshark's native capture file format is pcap format,
which is also the format used by tcpdump and various other tools.
Wireshark can read / import the following file formats:
• pcap - captures from Wireshark/TShark/dumpcap, tcpdump, and various other tools using
libpcap's/WinPcap's/tcpdump's/WinDump's capture format
• pcapng - "next-generation" successor to pcap format
• snoop and atmsnoop captures
• Shomiti/Finisar Surveyor captures
• Novell LANalyzer captures
• Microsoft Network Monitor captures
• AIX's iptrace captures
• Cinco Networks NetXRay captures
• Network Associates Windows-based Sniffer captures
• Network General/Network Associates DOS-based Sniffer (compressed or uncompressed) captures
• AG Group/WildPackets/Savvius EtherPeek/TokenPeek/AiroPeek/EtherHelp/PacketGrabber captures
• RADCOM's WAN/LAN analyzer captures
• Network Instruments Observer version 9 captures
• Lucent/Ascend router debug output
• files from HP-UX's nettl
• Toshiba's ISDN routers dump output
• the output from i4btrace from the ISDN4BSD project
• traces from the EyeSDN USB S0.
• the output in IPLog format from the Cisco Secure Intrusion Detection System
• pppd logs (pppdump format)
• the output from VMS's TCPIPtrace/TCPtrace/UCX$TRACE utilities
• the text output from the DBS Etherwatch VMS utility
• Visual Networks' Visual UpTime traffic capture
• the output from CoSine L2 debug
• the output from InfoVista's 5View LAN agents
• Endace Measurement Systems' ERF format captures
• Linux Bluez Bluetooth stack hcidump -w traces
• Catapult DCT2000 .out files
• Gammu generated text output from Nokia DCT3 phones in Netmonitor mode
• IBM Series (OS/400) Comm traces (ASCII & UNICODE)
• Juniper Netscreen snoop files
• Symbian OS btsnoop files
• TamoSoft CommView files
• Textronix K12xx 32bit .rf5 format files
• Textronix K12 text file format captures
• Apple PacketLogger files
• Files from Aethra Telecommunications' PC108 software for their test instruments
• MPEG-2 Transport Streams as defined in ISO/IEC 13818-1
• Rabbit Labs CAM Inspector files
• Colasoft Capsa files
There is no need to tell Wireshark what type of file you are reading; it will determine the file type by
itself. Wireshark is also capable of reading any of these file formats if they are compressed using
gzip. Wireshark recognizes this directly from the file; the '.gz' extension is not required for this
purpose.
Like other protocol analyzers, Wireshark's main window shows 3 views of a packet. It shows a summary
line, briefly describing what the packet is. A packet details display is shown, allowing you to drill
down to exact protocol or field that you interested in. Finally, a hex dump shows you exactly what the
packet looks like when it goes over the wire.
In addition, Wireshark has some features that make it unique. It can assemble all the packets in a TCP
conversation and show you the ASCII (or EBCDIC, or hex) data in that conversation. Display filters in
Wireshark are very powerful; more fields are filterable in Wireshark than in other protocol analyzers,
and the syntax you can use to create your filters is richer. As Wireshark progresses, expect more and
more protocol fields to be allowed in display filters.
Packet capturing is performed with the pcap library. The capture filter syntax follows the rules of the
pcap library. This syntax is different from the display filter syntax.
Compressed file support uses (and therefore requires) the zlib library. If the zlib library is not
present, Wireshark will compile, but will be unable to read compressed files.
The pathname of a capture file to be read can be specified with the -r option or can be specified as a
command-line argument.
OPTIONS
Most users will want to start Wireshark without options and configure it from the menus instead. Those
users may just skip this section.
-a <capture autostop condition>
Specify a criterion that specifies when Wireshark is to stop writing to a capture file. The
criterion is of the form test:value, where test is one of:
duration:value Stop writing to a capture file after value seconds have elapsed.
filesize:value Stop writing to a capture file after it reaches a size of value kB. If this option is
used together with the -b option, Wireshark will stop writing to the current capture file and switch
to the next one if filesize is reached. Note that the filesize is limited to a maximum value of 2
GiB.
files:value Stop writing to capture files after value number of files were written.
-b <capture ring buffer option>
Cause Wireshark to run in "multiple files" mode. In "multiple files" mode, Wireshark will write to
several capture files. When the first capture file fills up, Wireshark will switch writing to the
next file and so on.
The created filenames are based on the filename given with the -w flag, the number of the file and on
the creation date and time, e.g. outfile_00001_20190714120117.pcap,
outfile_00002_20190714120523.pcap, ...
With the files option it's also possible to form a "ring buffer". This will fill up new files until
the number of files specified, at which point Wireshark will discard the data in the first file and
start writing to that file and so on. If the files option is not set, new files filled up until one
of the capture stop conditions match (or until the disk is full).
The criterion is of the form key:value, where key is one of:
duration:value switch to the next file after value seconds have elapsed, even if the current file is
not completely filled up.
interval:value switch to the next file when the time is an exact multiple of value seconds
filesize:value switch to the next file after it reaches a size of value kB. Note that the filesize
is limited to a maximum value of 2 GiB.
files:value begin again with the first file after value number of files were written (form a ring
buffer). This value must be less than 100000. Caution should be used when using large numbers of
files: some filesystems do not handle many files in a single directory well. The files criterion
requires either duration, interval or filesize to be specified to control when to go to the next
file. It should be noted that each -b parameter takes exactly one criterion; to specify two
criterion, each must be preceded by the -b option.
Example: -b filesize:1000 -b files:5 results in a ring buffer of five files of size one megabyte
each.
-B <capture buffer size>
Set capture buffer size (in MiB, default is 2 MiB). This is used by the capture driver to buffer
packet data until that data can be written to disk. If you encounter packet drops while capturing,
try to increase this size. Note that, while Wireshark attempts to set the buffer size to 2 MiB by
default, and can be told to set it to a larger value, the system or interface on which you're
capturing might silently limit the capture buffer size to a lower value or raise it to a higher
value.
This is available on UNIX systems with libpcap 1.0.0 or later and on Windows. It is not available on
UNIX systems with earlier versions of libpcap.
This option can occur multiple times. If used before the first occurrence of the -i option, it sets
the default capture buffer size. If used after an -i option, it sets the capture buffer size for the
interface specified by the last -i option occurring before this option. If the capture buffer size
is not set specifically, the default capture buffer size is used instead.
-c <capture packet count>
Set the maximum number of packets to read when capturing live data.
-C <configuration profile>
Start with the given configuration profile.
-d <layer type>==<selector>,<decode-as protocol>
Like Wireshark's Decode As... feature, this lets you specify how a layer type should be dissected.
If the layer type in question (for example, tcp.port or udp.port for a TCP or UDP port number) has
the specified selector value, packets should be dissected as the specified protocol.
Example: -d tcp.port==8888,http will decode any traffic running over TCP port 8888 as HTTP.
See the tshark(1) manual page for more examples.
-D Print a list of the interfaces on which Wireshark can capture, and exit. For each network interface,
a number and an interface name, possibly followed by a text description of the interface, is printed.
The interface name or the number can be supplied to the -i flag to specify an interface on which to
capture.
This can be useful on systems that don't have a command to list them (UNIX systems lacking ifconfig
-a or Linux systems lacking ip link show). The number can be useful on Windows systems, where the
interface name might be a long name or a GUID.
Note that "can capture" means that Wireshark was able to open that device to do a live capture; if,
on your system, a program doing a network capture must be run from an account with special privileges
(for example, as root), then, if Wireshark is run with the -D flag and is not run from such an
account, it will not list any interfaces.
--display=<X display to use>
Specifies the X display to use. A hostname and screen (otherhost:0.0) or just a screen (:0.0) can be
specified. This option is not available under Windows.
-f <capture filter>
Set the capture filter expression.
This option can occur multiple times. If used before the first occurrence of the -i option, it sets
the default capture filter expression. If used after an -i option, it sets the capture filter
expression for the interface specified by the last -i option occurring before this option. If the
capture filter expression is not set specifically, the default capture filter expression is used if
provided.
Pre-defined capture filter names, as shown in the GUI menu item Capture->Capture Filters, can be used
by prefixing the argument with "predef:". Example: -f "predef:MyPredefinedHostOnlyFilter"
--fullscreen
Start Wireshark in full screen mode (kiosk mode). To exit from fullscreen mode, open the View menu
and select the Full Screen option. Alternatively, press the F11 key (or Ctrl + Cmd + F for macOS).
-g <packet number>
After reading in a capture file using the -r flag, go to the given packet number.
-h Print the version and options and exit.
-H Hide the capture info dialog during live packet capture.
-i <capture interface>|-
Set the name of the network interface or pipe to use for live packet capture.
Network interface names should match one of the names listed in "wireshark -D" (described above); a
number, as reported by "wireshark -D", can also be used. If you're using UNIX, "netstat -i" or
"ifconfig -a" might also work to list interface names, although not all versions of UNIX support the
-a flag to ifconfig.
If no interface is specified, Wireshark searches the list of interfaces, choosing the first non-
loopback interface if there are any non-loopback interfaces, and choosing the first loopback
interface if there are no non-loopback interfaces. If there are no interfaces at all, Wireshark
reports an error and doesn't start the capture.
Pipe names should be either the name of a FIFO (named pipe) or ``-'' to read data from the standard
input. On Windows systems, pipe names must be of the form ``\\pipe\.\pipename''. Data read from
pipes must be in standard pcap format.
This option can occur multiple times. When capturing from multiple interfaces, the capture file will
be saved in pcapng format.
-I Put the interface in "monitor mode"; this is supported only on IEEE 802.11 Wi-Fi interfaces, and
supported only on some operating systems.
Note that in monitor mode the adapter might disassociate from the network with which it's associated,
so that you will not be able to use any wireless networks with that adapter. This could prevent
accessing files on a network server, or resolving host names or network addresses, if you are
capturing in monitor mode and are not connected to another network with another adapter.
This option can occur multiple times. If used before the first occurrence of the -i option, it
enables the monitor mode for all interfaces. If used after an -i option, it enables the monitor mode
for the interface specified by the last -i option occurring before this option.
-j Use after -J to change the behavior when no exact match is found for the filter. With this option
select the first packet before.
-J <jump filter>
After reading in a capture file using the -r flag, jump to the packet matching the filter (display
filter syntax). If no exact match is found the first packet after that is selected.
-k Start the capture session immediately. If the -i flag was specified, the capture uses the specified
interface. Otherwise, Wireshark searches the list of interfaces, choosing the first non-loopback
interface if there are any non-loopback interfaces, and choosing the first loopback interface if
there are no non-loopback interfaces; if there are no interfaces, Wireshark reports an error and
doesn't start the capture.
-K <keytab>
Load kerberos crypto keys from the specified keytab file. This option can be used multiple times to
load keys from several files.
Example: -K krb5.keytab
-l Turn on automatic scrolling if the packet display is being updated automatically as packets arrive
during a capture (as specified by the -S flag).
-L List the data link types supported by the interface and exit.
-n Disable network object name resolution (such as hostname, TCP and UDP port names), the -N flag might
override this one.
-N <name resolving flags>
Turn on name resolving only for particular types of addresses and port numbers, with name resolving
for other types of addresses and port numbers turned off. This flag overrides -n if both -N and -n
are present. If both -N and -n flags are not present, all name resolutions are turned on.
The argument is a string that may contain the letters:
m to enable MAC address resolution
n to enable network address resolution
N to enable using external resolvers (e.g., DNS) for network address resolution
t to enable transport-layer port number resolution
d to enable resolution from captured DNS packets
v to enable VLAN IDs to names resolution
-o <preference/recent setting>
Set a preference or recent value, overriding the default value and any value read from a
preference/recent file. The argument to the flag is a string of the form prefname:value, where
prefname is the name of the preference/recent value (which is the same name that would appear in the
preference/recent file), and value is the value to which it should be set. Since Ethereal 0.10.12,
the recent settings replaces the formerly used -B, -P and -T flags to manipulate the GUI dimensions.
If prefname is "uat", you can override settings in various user access tables using the form uat:uat
filename:uat record. uat filename must be the name of a UAT file, e.g. user_dlts. uat_record must
be in the form of a valid record for that file, including quotes. For instance, to specify a user
DLT from the command line, you would use
-o "uat:user_dlts:\"User 0 (DLT=147)\",\"cops\",\"0\",\"\",\"0\",\"\""
-p Don't put the interface into promiscuous mode. Note that the interface might be in promiscuous mode
for some other reason; hence, -p cannot be used to ensure that the only traffic that is captured is
traffic sent to or from the machine on which Wireshark is running, broadcast traffic, and multicast
traffic to addresses received by that machine.
This option can occur multiple times. If used before the first occurrence of the -i option, no
interface will be put into the promiscuous mode. If used after an -i option, the interface specified
by the last -i option occurring before this option will not be put into the promiscuous mode.
-P <path setting>
Special path settings usually detected automatically. This is used for special cases, e.g. starting
Wireshark from a known location on an USB stick.
The criterion is of the form key:path, where key is one of:
persconf:path path of personal configuration files, like the preferences files.
persdata:path path of personal data files, it's the folder initially opened. After the very first
initialization, the recent file will keep the folder last used.
-r <infile>
Read packet data from infile, can be any supported capture file format (including gzipped files).
It's not possible to use named pipes or stdin here! To capture from a pipe or from stdin use -i -
-R <read (display) filter>
When reading a capture file specified with the -r flag, causes the specified filter (which uses the
syntax of display filters, rather than that of capture filters) to be applied to all packets read
from the capture file; packets not matching the filter are discarded.
-s <capture snaplen>
Set the default snapshot length to use when capturing live data. No more than snaplen bytes of each
network packet will be read into memory, or saved to disk. A value of 0 specifies a snapshot length
of 262144, so that the full packet is captured; this is the default.
This option can occur multiple times. If used before the first occurrence of the -i option, it sets
the default snapshot length. If used after an -i option, it sets the snapshot length for the
interface specified by the last -i option occurring before this option. If the snapshot length is
not set specifically, the default snapshot length is used if provided.
-S Automatically update the packet display as packets are coming in.
-t a|ad|adoy|d|dd|e|r|u|ud|udoy
Set the format of the packet timestamp displayed in the packet list window. The format can be one
of:
a absolute: The absolute time, as local time in your time zone, is the actual time the packet was
captured, with no date displayed
ad absolute with date: The absolute date, displayed as YYYY-MM-DD, and time, as local time in your
time zone, is the actual time and date the packet was captured
adoy absolute with date using day of year: The absolute date, displayed as YYYY/DOY, and time, as
local time in your time zone, is the actual time and date the packet was captured
d delta: The delta time is the time since the previous packet was captured
dd delta_displayed: The delta_displayed time is the time since the previous displayed packet was
captured
e epoch: The time in seconds since epoch (Jan 1, 1970 00:00:00)
r relative: The relative time is the time elapsed between the first packet and the current packet
u UTC: The absolute time, as UTC, is the actual time the packet was captured, with no date displayed
ud UTC with date: The absolute date, displayed as YYYY-MM-DD, and time, as UTC, is the actual time
and date the packet was captured
udoy UTC with date using day of year: The absolute date, displayed as YYYY/DOY, and time, as UTC, is
the actual time and date the packet was captured
The default format is relative.
-v Print the version and exit.
-w <outfile>
Set the default capture file name.
-X <eXtension options>
Specify an option to be passed to an Wireshark module. The eXtension option is in the form
extension_key:value, where extension_key can be:
lua_script:lua_script_filename tells Wireshark to load the given script in addition to the default
Lua scripts.
lua_scriptnum:argument tells Wireshark to pass the given argument to the lua script identified by
'num', which is the number indexed order of the 'lua_script' command. For example, if only one
script was loaded with '-X lua_script:my.lua', then '-X lua_script1:foo' will pass the string 'foo'
to the 'my.lua' script. If two scripts were loaded, such as '-X lua_script:my.lua' and '-X
lua_script:other.lua' in that order, then a '-X lua_script2:bar' would pass the string 'bar' to the
second lua script, namely 'other.lua'.
read_format:file_format tells Wireshark to use the given file format to read in the file (the file
given in the -r command option).
stdin_descr:description tells Wireshark to use the given description when capturing from standard
input (-i -).
-y <capture link type>
If a capture is started from the command line with -k, set the data link type to use while capturing
packets. The values reported by -L are the values that can be used.
This option can occur multiple times. If used before the first occurrence of the -i option, it sets
the default capture link type. If used after an -i option, it sets the capture link type for the
interface specified by the last -i option occurring before this option. If the capture link type is
not set specifically, the default capture link type is used if provided.
-Y <displaY filter>
Start with the given display filter.
-z <statistics>
Get Wireshark to collect various types of statistics and display the result in a window that updates
in semi-real time.
Currently implemented statistics are:
-z help
Display all possible values for -z.
-z afp,srt[,filter]
Show Apple Filing Protocol service response time statistics.
-z conv,type[,filter]
Create a table that lists all conversations that could be seen in the capture. type specifies
the conversation endpoint types for which we want to generate the statistics; currently the
supported ones are:
"eth" Ethernet addresses
"fc" Fibre Channel addresses
"fddi" FDDI addresses
"ip" IPv4 addresses
"ipv6" IPv6 addresses
"ipx" IPX addresses
"tcp" TCP/IP socket pairs Both IPv4 and IPv6 are supported
"tr" Token Ring addresses
"udp" UDP/IP socket pairs Both IPv4 and IPv6 are supported
If the optional filter is specified, only those packets that match the filter will be used in the
calculations.
The table is presented with one line for each conversation and displays the number of
packets/bytes in each direction as well as the total number of packets/bytes. By default, the
table is sorted according to the total number of packets.
These tables can also be generated at runtime by selecting the appropriate conversation type from
the menu "Tools/Statistics/Conversation List/".
-z dcerpc,srt,name-or-uuid,major.minor[,filter]
Collect call/reply SRT (Service Response Time) data for DCERPC interface name or uuid, version
major.minor. Data collected is the number of calls for each procedure, MinSRT, MaxSRT and
AvgSRT. Interface name and uuid are case-insensitive.
Example: -z dcerpc,srt,12345778-1234-abcd-ef00-0123456789ac,1.0 will collect data for the CIFS
SAMR Interface.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z dcerpc,srt,12345778-1234-abcd-ef00-0123456789ac,1.0,ip.addr==1.2.3.4 will collect
SAMR SRT statistics for a specific host.
-z bootp,stat[,filter]
Show DHCP (BOOTP) statistics.
-z expert
Show expert information.
-z fc,srt[,filter]
Collect call/reply SRT (Service Response Time) data for FC. Data collected is the number of
calls for each Fibre Channel command, MinSRT, MaxSRT and AvgSRT.
Example: -z fc,srt will calculate the Service Response Time as the time delta between the First
packet of the exchange and the Last packet of the exchange.
The data will be presented as separate tables for all normal FC commands, Only those commands
that are seen in the capture will have its stats displayed.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z "fc,srt,fc.id==01.02.03" will collect stats only for FC packets exchanged by the host
at FC address 01.02.03 .
-z h225,counter[,filter]
Count ITU-T H.225 messages and their reasons. In the first column you get a list of H.225
messages and H.225 message reasons which occur in the current capture file. The number of
occurrences of each message or reason is displayed in the second column.
Example: -z h225,counter
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z "h225,counter,ip.addr==1.2.3.4" will collect stats only for H.225 packets exchanged
by the host at IP address 1.2.3.4 .
-z h225,srt[,filter]
Collect request/response SRT (Service Response Time) data for ITU-T H.225 RAS. Data collected is
the number of calls of each ITU-T H.225 RAS Message Type, Minimum SRT, Maximum SRT, Average SRT,
Minimum in Packet, and Maximum in Packet. You will also get the number of Open Requests
(Unresponded Requests), Discarded Responses (Responses without matching request) and Duplicate
Messages.
Example: -z h225,srt
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z "h225,srt,ip.addr==1.2.3.4" will collect stats only for ITU-T H.225 RAS packets
exchanged by the host at IP address 1.2.3.4 .
-z io,stat
Collect packet/bytes statistics for the capture in intervals of 1 second. This option will open
a window with up to 5 color-coded graphs where number-of-packets-per-second or number-of-bytes-
per-second statistics can be calculated and displayed.
This option can be used multiple times on the command line.
This graph window can also be opened from the Analyze:Statistics:Traffic:IO-Stat menu item.
-z ldap,srt[,filter]
Collect call/reply SRT (Service Response Time) data for LDAP. Data collected is the number of
calls for each implemented LDAP command, MinSRT, MaxSRT and AvgSRT.
Example: -z ldap,srt will calculate the Service Response Time as the time delta between the
Request and the Response.
The data will be presented as separate tables for all implemented LDAP commands, Only those
commands that are seen in the capture will have its stats displayed.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: use -z "ldap,srt,ip.addr==10.1.1.1" will collect stats only for LDAP packets exchanged
by the host at IP address 10.1.1.1 .
The only LDAP commands that are currently implemented and for which the stats will be available
are: BIND SEARCH MODIFY ADD DELETE MODRDN COMPARE EXTENDED
-z megaco,srt[,filter]
Collect request/response SRT (Service Response Time) data for MEGACO. (This is similar to -z
smb,srt). Data collected is the number of calls for each known MEGACO Command, Minimum SRT,
Maximum SRT and Average SRT.
Example: -z megaco,srt
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z "megaco,srt,ip.addr==1.2.3.4" will collect stats only for MEGACO packets exchanged by
the host at IP address 1.2.3.4 .
-z mgcp,srt[,filter]
Collect request/response SRT (Service Response Time) data for MGCP. (This is similar to -z
smb,srt). Data collected is the number of calls for each known MGCP Type, Minimum SRT, Maximum
SRT and Average SRT.
Example: -z mgcp,srt
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z "mgcp,srt,ip.addr==1.2.3.4" will collect stats only for MGCP packets exchanged by the
host at IP address 1.2.3.4 .
-z mtp3,msus[,<filter>]
Show MTP3 MSU statistics.
-z multicast,stat[,<filter>]
Show UDP multicast stream statistics.
-z rpc,programs
Collect call/reply SRT data for all known ONC-RPC programs/versions. Data collected is the
number of calls for each protocol/version, MinSRT, MaxSRT and AvgSRT.
-z rpc,srt,name-or-number,version[,<filter>]
Collect call/reply SRT (Service Response Time) data for program name/version or number/version.
Data collected is the number of calls for each procedure, MinSRT, MaxSRT and AvgSRT. Program
name is case-insensitive.
Example: -z rpc,srt,100003,3 will collect data for NFS v3.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z rpc,srt,nfs,3,nfs.fh.hash==0x12345678 will collect NFS v3 SRT statistics for a
specific file.
-z scsi,srt,cmdset[,<filter>]
Collect call/reply SRT (Service Response Time) data for SCSI commandset <cmdset>.
Commandsets are 0:SBC 1:SSC 5:MMC
Data collected is the number of calls for each procedure, MinSRT, MaxSRT and AvgSRT.
Example: -z scsi,srt,0 will collect data for SCSI BLOCK COMMANDS (SBC).
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z scsi,srt,0,ip.addr==1.2.3.4 will collect SCSI SBC SRT statistics for a specific
iscsi/ifcp/fcip host.
-z sip,stat[,filter]
This option will activate a counter for SIP messages. You will get the number of occurrences of
each SIP Method and of each SIP Status-Code. Additionally you also get the number of resent SIP
Messages (only for SIP over UDP).
Example: -z sip,stat
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z "sip,stat,ip.addr==1.2.3.4" will collect stats only for SIP packets exchanged by the
host at IP address 1.2.3.4 .
-z smb,srt[,filter]
Collect call/reply SRT (Service Response Time) data for SMB. Data collected is the number of
calls for each SMB command, MinSRT, MaxSRT and AvgSRT.
Example: -z smb,srt
The data will be presented as separate tables for all normal SMB commands, all Transaction2
commands and all NT Transaction commands. Only those commands that are seen in the capture will
have their stats displayed. Only the first command in a xAndX command chain will be used in the
calculation. So for common SessionSetupAndX + TreeConnectAndX chains, only the SessionSetupAndX
call will be used in the statistics. This is a flaw that might be fixed in the future.
This option can be used multiple times on the command line.
If the optional filter is provided, the stats will only be calculated on those calls that match
that filter.
Example: -z "smb,srt,ip.addr==1.2.3.4" will collect stats only for SMB packets exchanged by the
host at IP address 1.2.3.4 .
-z voip,calls
This option will show a window that shows VoIP calls found in the capture file. This is the same
window shown as when you go to the Statistics Menu and choose VoIP Calls.
Example: -z voip,calls
-z wlan,stat[,<filter>]
Show IEEE 802.11 network and station statistics.
-z wsp,stat[,<filter>]
Show WSP packet counters.
--enable-protocol <proto_name>
Enable dissection of proto_name.
--disable-protocol <proto_name>
Disable dissection of proto_name.
--enable-heuristic <short_name>
Enable dissection of heuristic protocol.
--disable-heuristic <short_name>
Disable dissection of heuristic protocol.
--list-time-stamp-types
List time stamp types supported for the interface. If no time stamp type can be set, no time stamp
types are listed.
--time-stamp-type <type>
Change the interface's timestamp method.
INTERFACE
MENU ITEMS
File:Open
File:Open Recent
File:Merge
Merge another capture file to the currently loaded one. The File:Merge dialog box allows the merge
"Prepended", "Chronologically" or "Appended", relative to the already loaded one.
File:Close
Open or close a capture file. The File:Open dialog box allows a filter to be specified; when the
capture file is read, the filter is applied to all packets read from the file, and packets not
matching the filter are discarded. The File:Open Recent is a submenu and will show a list of
previously opened files.
File:Save
File:Save As
Save the current capture, or the packets currently displayed from that capture, to a file. Check
boxes let you select whether to save all packets, or just those that have passed the current display
filter and/or those that are currently marked, and an option menu lets you select (from a list of
file formats in which at particular capture, or the packets currently displayed from that capture,
can be saved), a file format in which to save it.
File:File Set:List Files
Show a dialog box that lists all files of the file set matching the currently loaded file. A file
set is a compound of files resulting from a capture using the "multiple files" / "ringbuffer" mode,
recognizable by the filename pattern, e.g.: Filename_00001_20190714101530.pcap.
File:File Set:Next File
File:File Set:Previous File
If the currently loaded file is part of a file set (see above), open the next / previous file in that
set.
File:Export
Export captured data into an external format. Note: the data cannot be imported back into Wireshark,
so be sure to keep the capture file.
File:Print
Print packet data from the current capture. You can select the range of packets to be printed (which
packets are printed), and the output format of each packet (how each packet is printed). The output
format will be similar to the displayed values, so a summary line, the packet details view, and/or
the hex dump of the packet can be printed.
Printing options can be set with the Edit:Preferences menu item, or in the dialog box popped up by
this menu item.
File:Quit
Exit the application.
Edit:Copy:Description
Copies the description of the selected field in the protocol tree to the clipboard.
Edit:Copy:Fieldname
Copies the fieldname of the selected field in the protocol tree to the clipboard.
Edit:Copy:Value
Copies the value of the selected field in the protocol tree to the clipboard.
Edit:Copy:As Filter
Create a display filter based on the data currently highlighted in the packet details and copy that
filter to the clipboard.
If that data is a field that can be tested in a display filter expression, the display filter will
test that field; otherwise, the display filter will be based on the absolute offset within the
packet. Therefore it could be unreliable if the packet contains protocols with variable-length
headers, such as a source-routed token-ring packet.
Edit:Find Packet
Search forward or backward, starting with the currently selected packet (or the most recently
selected packet, if no packet is selected). Search criteria can be a display filter expression, a
string of hexadecimal digits, or a text string.
When searching for a text string, you can search the packet data, or you can search the text in the
Info column in the packet list pane or in the packet details pane.
Hexadecimal digits can be separated by colons, periods, or dashes. Text string searches can be ASCII
or Unicode (or both), and may be case insensitive.
Edit:Find Next
Edit:Find Previous
Search forward / backward for a packet matching the filter from the previous search, starting with
the currently selected packet (or the most recently selected packet, if no packet is selected).
Edit:Mark Packet (toggle)
Mark (or unmark if currently marked) the selected packet. The field "frame.marked" is set for
packets that are marked, so that, for example, a display filters can be used to display only marked
packets, and so that the "Edit:Find Packet" dialog can be used to find the next or previous marked
packet.
Edit:Find Next Mark
Edit:Find Previous Mark
Find next/previous marked packet.
Edit:Mark All Packets
Edit:Unmark All Packets
Mark / Unmark all packets that are currently displayed.
Edit:Time Reference:Set Time Reference (toggle)
Set (or unset if currently set) the selected packet as a Time Reference packet. When a packet is set
as a Time Reference packet, the timestamps in the packet list pane will be replaced with the string
"*REF*". The relative time timestamp in later packets will then be calculated relative to the
timestamp of this Time Reference packet and not the first packet in the capture.
Packets that have been selected as Time Reference packets will always be displayed in the packet list
pane. Display filters will not affect or hide these packets.
If there is a column displayed for "Cumulative Bytes" this counter will be reset at every Time
Reference packet.
Edit:Time Reference:Find Next
Edit:Time Reference:Find Previous
Search forward / backward for a time referenced packet.
Edit:Configuration Profiles
Manage configuration profiles to be able to use more than one set of preferences and configurations.
Edit:Preferences
Set the GUI, capture, printing and protocol options (see "Preferences" dialog below).
View:Main Toolbar
View:Filter Toolbar
View:Statusbar
Show or hide the main window controls.
View:Packet List
View:Packet Details
View:Packet Bytes
Show or hide the main window panes.
View:Time Display Format
Set the format of the packet timestamp displayed in the packet list window.
View:Name Resolution:Resolve Name
Try to resolve a name for the currently selected item.
View:Name Resolution:Enable for ... Layer
Enable or disable translation of addresses to names in the display.
View:Colorize Packet List
Enable or disable the coloring rules. Disabling will improve performance.
View:Auto Scroll in Live Capture
Enable or disable the automatic scrolling of the packet list while a live capture is in progress.
View:Zoom In
View:Zoom Out
Zoom into / out of the main window data (by changing the font size).
View:Normal Size
Reset the zoom factor of zoom in / zoom out back to normal font size.
View:Resize All Columns
Resize all columns to best fit the current packet display.
View:Expand / Collapse Subtrees
Expands / Collapses the currently selected item and it's subtrees in the packet details.
View:Expand All
View:Collapse All
Expand / Collapse all branches of the packet details.
View:Colorize Conversation
Select color for a conversation.
View:Reset Coloring 1-10
Reset Color for a conversation.
View:Coloring Rules
Change the foreground and background colors of the packet information in the list of packets, based
upon display filters. The list of display filters is applied to each packet sequentially. After the
first display filter matches a packet, any additional display filters in the list are ignored.
Therefore, if you are filtering on the existence of protocols, you should list the higher-level
protocols first, and the lower-level protocols last.
How Colorization Works
Packets are colored according to a list of color filters. Each filter consists of a name, a
filter expression and a coloration. A packet is colored according to the first filter that it
matches. Color filter expressions use exactly the same syntax as display filter expressions.
When Wireshark starts, the color filters are loaded from:
1. The user's personal color filters file or, if that does not exist,
2. The global color filters file.
If neither of these exist then the packets will not be colored.
View:Show Packet In New Window
Create a new window containing a packet details view and a hex dump window of the currently selected
packet; this window will continue to display that packet's details and data even if another packet is
selected.
View:Reload
Reload a capture file. Same as File:Close and File:Open the same file again.
Go:Back
Go back in previously visited packets history.
Go:Forward
Go forward in previously visited packets history.
Go:Go To Packet
Go to a particular numbered packet.
Go:Go To Corresponding Packet
If a field in the packet details pane containing a packet number is selected, go to the packet number
specified by that field. (This works only if the dissector that put that entry into the packet
details put it into the details as a filterable field rather than just as text.) This can be used,
for example, to go to the packet for the request corresponding to a reply, or the reply corresponding
to a request, if that packet number has been put into the packet details.
Go:Previous Packet
Go:Next Packet
Go:First Packet
Go:Last Packet
Go to the previous / next / first / last packet in the capture.
Go:Previous Packet In Conversation
Go:Next Packet In Conversation
Go to the previous / next packet of the conversation (TCP, UDP or IP)
Capture:Interfaces
Shows a dialog box with all currently known interfaces and displaying the current network traffic
amount. Capture sessions can be started from here. Beware: keeping this box open results in high
system load!
Capture:Options
Initiate a live packet capture (see "Capture Options Dialog" below). If no filename is specified, a
temporary file will be created to hold the capture. The location of the file can be chosen by
setting your TMPDIR environment variable before starting Wireshark. Otherwise, the default TMPDIR
location is system-dependent, but is likely either /var/tmp or /tmp.
Capture:Start
Start a live packet capture with the previously selected options. This won't open the options dialog
box, and can be convenient for repeatedly capturing with the same options.
Capture:Stop
Stop a running live capture.
Capture:Restart
While a live capture is running, stop it and restart with the same options again. This can be
convenient to remove irrelevant packets, if no valuable packets were captured so far.
Capture:Capture Filters
Edit the saved list of capture filters, allowing filters to be added, changed, or deleted.
Analyze:Display Filters
Edit the saved list of display filters, allowing filters to be added, changed, or deleted.
Analyze:Display Filter Macros
Create shortcuts for complex macros
Analyze:Apply as Filter
Create a display filter based on the data currently highlighted in the packet details and apply the
filter.
If that data is a field that can be tested in a display filter expression, the display filter will
test that field; otherwise, the display filter will be based on the absolute offset within the
packet. Therefore it could be unreliable if the packet contains protocols with variable-length
headers, such as a source-routed token-ring packet.
The Selected option creates a display filter that tests for a match of the data; the Not Selected
option creates a display filter that tests for a non-match of the data. The And Selected, Or
Selected, And Not Selected, and Or Not Selected options add to the end of the display filter in the
strip at the top (or bottom) an AND or OR operator followed by the new display filter expression.
Analyze:Prepare a Filter
Create a display filter based on the data currently highlighted in the packet details. The filter
strip at the top (or bottom) is updated but it is not yet applied.
Analyze:Enabled Protocols
Allow protocol dissection to be enabled or disabled for a specific protocol. Individual protocols
can be enabled or disabled by clicking on them in the list or by highlighting them and pressing the
space bar. The entire list can be enabled, disabled, or inverted using the buttons below the list.
When a protocol is disabled, dissection in a particular packet stops when that protocol is reached,
and Wireshark moves on to the next packet. Any higher-layer protocols that would otherwise have been
processed will not be displayed. For example, disabling TCP will prevent the dissection and display
of TCP, HTTP, SMTP, Telnet, and any other protocol exclusively dependent on TCP.
The list of protocols can be saved, so that Wireshark will start up with the protocols in that list
disabled.
Analyze:Decode As
If you have a packet selected, present a dialog allowing you to change which dissectors are used to
decode this packet. The dialog has one panel each for the link layer, network layer and transport
layer protocol/port numbers, and will allow each of these to be changed independently. For example,
if the selected packet is a TCP packet to port 12345, using this dialog you can instruct Wireshark to
decode all packets to or from that TCP port as HTTP packets.
Analyze:User Specified Decodes
Create a new window showing whether any protocol ID to dissector mappings have been changed by the
user. This window also allows the user to reset all decodes to their default values.
Analyze:Follow TCP Stream
If you have a TCP packet selected, display the contents of the data stream for the TCP connection to
which that packet belongs, as text, in a separate window, and leave the list of packets in a filtered
state, with only those packets that are part of that TCP connection being displayed. You can revert
to your old view by pressing ENTER in the display filter text box, thereby invoking your old display
filter (or resetting it back to no display filter).
The window in which the data stream is displayed lets you select:
• whether to display the entire conversation, or one or the other side of it;
• whether the data being displayed is to be treated as ASCII or EBCDIC text or as raw hex data;
and lets you print what's currently being displayed, using the same print options that are used for
the File:Print Packet menu item, or save it as text to a file.
Analyze:Follow UDP Stream
Analyze:Follow SSL Stream
(Similar to Analyze:Follow TCP Stream)
Analyze:Expert Info
Analyze:Expert Info Composite
(Kind of) a log of anomalies found by Wireshark in a capture file.
Analyze:Conversation Filter
Statistics:Summary
Show summary information about the capture, including elapsed time, packet counts, byte counts, and
the like. If a display filter is in effect, summary information will be shown about the capture and
about the packets currently being displayed.
Statistics:Protocol Hierarchy
Show the number of packets, and the number of bytes in those packets, for each protocol in the trace.
It organizes the protocols in the same hierarchy in which they were found in the trace. Besides
counting the packets in which the protocol exists, a count is also made for packets in which the
protocol is the last protocol in the stack. These last-protocol counts show you how many packets
(and the byte count associated with those packets) ended in a particular protocol. In the table,
they are listed under "End Packets" and "End Bytes".
Statistics:Conversations
Lists of conversations; selectable by protocol. See Statistics:Conversation List below.
Statistics:End Points
List of End Point Addresses by protocol with packets/bytes/.... counts.
Statistics:Packet Lengths
Grouped counts of packet lengths (0-19 bytes, 20-39 bytes, ...)
Statistics:IO Graphs
Open a window where up to 5 graphs in different colors can be displayed to indicate number of packets
or number of bytes per second for all packets matching the specified filter. By default only one
graph will be displayed showing number of packets per second.
The top part of the window contains the graphs and scales for the X and Y axis. If the graph is too
long to fit inside the window there is a horizontal scrollbar below the drawing area that can scroll
the graphs to the left or the right. The horizontal axis displays the time into the capture and the
vertical axis will display the measured quantity at that time.
Below the drawing area and the scrollbar are the controls. On the bottom left there will be five
similar sets of controls to control each individual graph such as "Display:<button>" which button
will toggle that individual graph on/off. If <button> is ticked, the graph will be displayed.
"Color:<color>" which is just a button to show which color will be used to draw that graph (color is
only available in Gtk2 version) and finally "Filter:<filter-text>" which can be used to specify a
display filter for that particular graph.
If filter-text is empty then all packets will be used to calculate the quantity for that graph. If
filter-text is specified only those packets that match that display filter will be considered in the
calculation of quantity.
To the right of the 5 graph controls there are four menus to control global aspects of the draw area
and graphs. The "Unit:" menu is used to control what to measure; "packets/tick", "bytes/tick" or
"advanced..."
packets/tick will measure the number of packets matching the (if specified) display filter for the
graph in each measurement interval.
bytes/tick will measure the total number of bytes in all packets matching the (if specified) display
filter for the graph in each measurement interval.
advanced... see below
"Tick interval:" specifies what measurement intervals to use. The default is 1 second and means that
the data will be counted over 1 second intervals.
"Pixels per tick:" specifies how many pixels wide each measurement interval will be in the drawing
area. The default is 5 pixels per tick.
"Y-scale:" controls the max value for the y-axis. Default value is "auto" which means that Wireshark
will try to adjust the maxvalue automatically.
"advanced..." If Unit:advanced... is selected the window will display two more controls for each of
the five graphs. One control will be a menu where the type of calculation can be selected from
SUM,COUNT,MAX,MIN,AVG and LOAD, and one control, textbox, where the name of a single display filter
field can be specified.
The following restrictions apply to type and field combinations:
SUM: available for all types of integers and will calculate the SUM of all occurrences of this field
in the measurement interval. Note that some field can occur multiple times in the same packet and
then all instances will be summed up. Example: 'tcp.len' which will count the amount of payload data
transferred across TCP in each interval.
COUNT: available for all field types. This will COUNT the number of times certain field occurs in
each interval. Note that some fields may occur multiple times in each packet and if that is the case
then each instance will be counted independently and COUNT will be greater than the number of
packets.
MAX: available for all integer and relative time fields. This will calculate the max seen
integer/time value seen for the field during the interval. Example: 'smb.time' which will plot the
maximum SMB response time.
MIN: available for all integer and relative time fields. This will calculate the min seen
integer/time value seen for the field during the interval. Example: 'smb.time' which will plot the
minimum SMB response time.
AVG: available for all integer and relative time fields.This will calculate the average seen
integer/time value seen for the field during the interval. Example: 'smb.time' which will plot the
average SMB response time.
LOAD: available only for relative time fields (response times).
Example of advanced: Display how NFS response time MAX/MIN/AVG changes over time:
Set first graph to:
filter:nfs&&rpc.time
Calc:MAX rpc.time
Set second graph to
filter:nfs&&rpc.time
Calc:AVG rpc.time
Set third graph to
filter:nfs&&rpc.time
Calc:MIN rpc.time
Example of advanced: Display how the average packet size from host a.b.c.d changes over time.
Set first graph to
filter:ip.addr==a.b.c.d&&frame.pkt_len
Calc:AVG frame.pkt_len
LOAD: The LOAD io-stat type is very different from anything you have ever seen before! While the
response times themselves as plotted by MIN,MAX,AVG are indications on the Server load (which affects
the Server response time), the LOAD measurement measures the Client LOAD. What this measures is how
much workload the client generates, i.e. how fast will the client issue new commands when the
previous ones completed. i.e. the level of concurrency the client can maintain. The higher the
number, the more and faster is the client issuing new commands. When the LOAD goes down, it may be
due to client load making the client slower in issuing new commands (there may be other reasons as
well, maybe the client just doesn't have any commands it wants to issue right then).
Load is measured in concurrency/number of overlapping i/o and the value 1000 means there is a
constant load of one i/o.
In each tick interval the amount of overlap is measured. See the graph below containing three
commands: Below the graph are the LOAD values for each interval that would be calculated.
| | | | | | | | |
| | | | | | | | |
| | o=====* | | | | | |
| | | | | | | | |
| o========* | o============* | | |
| | | | | | | | |
--------------------------------------------------> Time
500 1500 500 750 1000 500 0 0
Statistics:Conversation List
This option will open a new window that displays a list of all conversations between two endpoints.
The list has one row for each unique conversation and displays total number of packets/bytes seen as
well as number of packets/bytes in each direction.
By default the list is sorted according to the number of packets but by clicking on the column
header; it is possible to re-sort the list in ascending or descending order by any column.
By first selecting a conversation by clicking on it and then using the right mouse button (on those
platforms that have a right mouse button) wireshark will display a popup menu offering several
different filter operations to apply to the capture.
These statistics windows can also be invoked from the Wireshark command line using the -z conv
argument.
Statistics:Service Response Time
• AFP
• CAMEL
• DCE-RPC
Open a window to display Service Response Time statistics for an arbitrary DCE-RPC program
interface and display Procedure, Number of Calls, Minimum SRT, Maximum SRT and Average SRT for
all procedures for that program/version. These windows opened will update in semi-real time to
reflect changes when doing live captures or when reading new capture files into Wireshark.
This dialog will also allow an optional filter string to be used. If an optional filter string
is used only such DCE-RPC request/response pairs that match that filter will be used to calculate
the statistics. If no filter string is specified all request/response pairs will be used.
• Diameter
• Fibre Channel
Open a window to display Service Response Time statistics for Fibre Channel and display FC Type,
Number of Calls, Minimum SRT, Maximum SRT and Average SRT for all FC types. These windows opened
will update in semi-real time to reflect changes when doing live captures or when reading new
capture files into Wireshark. The Service Response Time is calculated as the time delta between
the First packet of the exchange and the Last packet of the exchange.
This dialog will also allow an optional filter string to be used. If an optional filter string
is used only such FC first/last exchange pairs that match that filter will be used to calculate
the statistics. If no filter string is specified all request/response pairs will be used.
• GTP
• H.225 RAS
Collect requests/response SRT (Service Response Time) data for ITU-T H.225 RAS. Data collected
is number of calls for each known ITU-T H.225 RAS Message Type, Minimum SRT, Maximum SRT, Average
SRT, Minimum in Packet, and Maximum in Packet. You will also get the number of Open Requests
(Unresponded Requests), Discarded Responses (Responses without matching request) and Duplicate
Messages. These windows opened will update in semi-real time to reflect changes when doing live
captures or when reading new capture files into Wireshark.
You can apply an optional filter string in a dialog box, before starting the calculation. The
statistics will only be calculated on those calls matching that filter.
• LDAP
• MEGACO
• MGCP
Collect requests/response SRT (Service Response Time) data for MGCP. Data collected is number of
calls for each known MGCP Type, Minimum SRT, Maximum SRT, Average SRT, Minimum in Packet, and
Maximum in Packet. These windows opened will update in semi-real time to reflect changes when
doing live captures or when reading new capture files into Wireshark.
You can apply an optional filter string in a dialog box, before starting the calculation. The
statistics will only be calculated on those calls matching that filter.
• NCP
• ONC-RPC
Open a window to display statistics for an arbitrary ONC-RPC program interface and display
Procedure, Number of Calls, Minimum SRT, Maximum SRT and Average SRT for all procedures for that
program/version. These windows opened will update in semi-real time to reflect changes when
doing live captures or when reading new capture files into Wireshark.
This dialog will also allow an optional filter string to be used. If an optional filter string
is used only such ONC-RPC request/response pairs that match that filter will be used to calculate
the statistics. If no filter string is specified all request/response pairs will be used.
By first selecting a conversation by clicking on it and then using the right mouse button (on
those platforms that have a right mouse button) wireshark will display a popup menu offering
several different filter operations to apply to the capture.
• RADIUS
• SCSI
• SMB
Collect call/reply SRT (Service Response Time) data for SMB. Data collected is the number of
calls for each SMB command, MinSRT, MaxSRT and AvgSRT.
The data will be presented as separate tables for all normal SMB commands, all Transaction2
commands and all NT Transaction commands. Only those commands that are seen in the capture will
have its stats displayed. Only the first command in a xAndX command chain will be used in the
calculation. So for common SessionSetupAndX + TreeConnectAndX chains, only the SessionSetupAndX
call will be used in the statistics. This is a flaw that might be fixed in the future.
You can apply an optional filter string in a dialog box, before starting the calculation. The
stats will only be calculated on those calls matching that filter.
By first selecting a conversation by clicking on it and then using the right mouse button (on
those platforms that have a right mouse button) wireshark will display a popup menu offering
several different filter operations to apply to the capture.
• SMB2
Statistics:BOOTP-DHCP
Statistics:Compare
Compare two Capture Files
Statistics:Flow Graph
Flow Graph: General/TCP
Statistics:HTTP
HTTP Load Distribution, Packet Counter & Requests
Statistics:IP Addresses
Count/Rate/Percent by IP Address
Statistics:IP Destinations
Count/Rate/Percent by IP Address/protocol/port
Statistics:IP Protocol Types
Count/Rate/Percent by IP Protocol Types
Statistics:ONC-RPC Programs
This dialog will open a window showing aggregated SRT statistics for all ONC-RPC Programs/versions
that exist in the capture file.
Statistics:TCP Stream Graph
Graphs: Round Trip; Throughput; Time-Sequence (Stevens); Time-Sequence (tcptrace)
Statistics:UDP Multicast streams
Multicast Streams Counts/Rates/... by Source/Destination Address/Port pairs
Statistics:WLAN Traffic
WLAN Traffic Statistics
Telephony:ITU-T H.225
Count ITU-T H.225 messages and their reasons. In the first column you get a list of H.225 messages
and H.225 message reasons, which occur in the current capture file. The number of occurrences of
each message or reason will be displayed in the second column. This window opened will update in
semi-real time to reflect changes when doing live captures or when reading new capture files into
Wireshark.
You can apply an optional filter string in a dialog box, before starting the counter. The statistics
will only be calculated on those calls matching that filter.
Telephony:SIP
Activate a counter for SIP messages. You will get the number of occurrences of each SIP Method and
of each SIP Status-Code. Additionally you also get the number of resent SIP Messages (only for SIP
over UDP).
This window opened will update in semi-real time to reflect changes when doing live captures or when
reading new capture files into Wireshark.
You can apply an optional filter string in a dialog box, before starting the counter. The statistics
will only be calculated on those calls matching that filter.
Tools:Firewall ACL Rules
Help:Contents
Some help texts.
Help:Supported Protocols
List of supported protocols and display filter protocol fields.
Help:Manual Pages
Display locally installed HTML versions of these manual pages in a web browser.
Help:Wireshark Online
Various links to online resources to be open in a web browser, like <https://www.wireshark.org>.
Help:About Wireshark
See various information about Wireshark (see "About" dialog below), like the version, the folders
used, the available plugins, ...
WINDOWS
Main Window
The main window contains the usual things like the menu, some toolbars, the main area and a
statusbar. The main area is split into three panes, you can resize each pane using a "thumb" at the
right end of each divider line.
The main window is much more flexible than before. The layout of the main window can be customized
by the Layout page in the dialog box popped up by Edit:Preferences, the following will describe the
layout with the default settings.
Main Toolbar
Some menu items are available for quick access here. There is no way to customize the items in
the toolbar, however the toolbar can be hidden by View:Main Toolbar.
Filter Toolbar
A display filter can be entered into the filter toolbar. A filter for HTTP, HTTPS, and DNS
traffic might look like this:
tcp.port in {80 443 53}
Selecting the Filter: button lets you choose from a list of named filters that you can
optionally save. Pressing the Return or Enter keys, or selecting the Apply button, will cause
the filter to be applied to the current list of packets. Selecting the Reset button clears the
display filter so that all packets are displayed (again).
There is no way to customize the items in the toolbar, however the toolbar can be hidden by
View:Filter Toolbar.
Packet List Pane
The top pane contains the list of network packets that you can scroll through and select. By
default, the packet number, packet timestamp, source and destination addresses, protocol, and
description are displayed for each packet; the Columns page in the dialog box popped up by
Edit:Preferences lets you change this (although, unfortunately, you currently have to save the
preferences, and exit and restart Wireshark, for those changes to take effect).
If you click on the heading for a column, the display will be sorted by that column; clicking
on the heading again will reverse the sort order for that column.
An effort is made to display information as high up the protocol stack as possible, e.g. IP
addresses are displayed for IP packets, but the MAC layer address is displayed for unknown
packet types.
The right mouse button can be used to pop up a menu of operations.
The middle mouse button can be used to mark a packet.
Packet Details Pane
The middle pane contains a display of the details of the currently-selected packet. The
display shows each field and its value in each protocol header in the stack. The right mouse
button can be used to pop up a menu of operations.
Packet Bytes Pane
The lowest pane contains a hex and ASCII dump of the actual packet data. Selecting a field in
the packet details highlights the corresponding bytes in this section.
The right mouse button can be used to pop up a menu of operations.
Statusbar
The statusbar is divided into three parts, on the left some context dependent things are shown,
like information about the loaded file, in the center the number of packets are displayed, and
on the right the current configuration profile.
The statusbar can be hidden by View:Statusbar.
Preferences
The Preferences dialog lets you control various personal preferences for the behavior of Wireshark.
User Interface Preferences
The User Interface page is used to modify small aspects of the GUI to your own personal taste:
Selection Bars
The selection bar in the packet list and packet details can have either a "browse" or
"select" behavior. If the selection bar has a "browse" behavior, the arrow keys will
move an outline of the selection bar, allowing you to browse the rest of the list or
details without changing the selection until you press the space bar. If the selection
bar has a "select" behavior, the arrow keys will move the selection bar and change the
selection to the new item in the packet list or packet details.
Save Window Position
If this item is selected, the position of the main Wireshark window will be saved when
Wireshark exits, and used when Wireshark is started again.
Save Window Size
If this item is selected, the size of the main Wireshark window will be saved when
Wireshark exits, and used when Wireshark is started again.
Save Window Maximized state
If this item is selected the maximize state of the main Wireshark window will be saved
when Wireshark exists, and used when Wireshark is started again.
File Open Dialog Behavior
This item allows the user to select how Wireshark handles the listing of the "File Open"
Dialog when opening trace files. "Remember Last Directory" causes Wireshark to
automatically position the dialog in the directory of the most recently opened file, even
between launches of Wireshark. "Always Open in Directory" allows the user to define a
persistent directory that the dialog will always default to.
Directory
Allows the user to specify a persistent File Open directory. Trailing slashes or
backslashes will automatically be added.
File Open Preview timeout
This items allows the user to define how much time is spend reading the capture file to
present preview data in the File Open dialog.
Open Recent maximum list entries
The File menu supports a recent file list. This items allows the user to specify how
many files are kept track of in this list.
Ask for unsaved capture files
When closing a capture file or Wireshark itself if the file isn't saved yet the user is
presented the option to save the file when this item is set.
Wrap during find
This items determines the behavior when reaching the beginning or the end of a capture
file. When set the search wraps around and continues, otherwise it stops.
Settings dialogs show a save button
This item determines if the various dialogs sport an explicit Save button or that save is
implicit in OK / Apply.
Web browser command
This entry specifies the command line to launch a web browser. It is used to access
online content, like the Wiki and user guide. Use '%s' to place the request URL in the
command line.
Display LEDs in the Expert Infos dialog tab labels
This item determines if LED-like colored images are displayed in the Expert Infos dialog
tab labels.
Layout Preferences
The Layout page lets you specify the general layout of the main window. You can choose from
six different layouts and fill the three panes with the contents you like.
Scrollbars
The vertical scrollbars in the three panes can be set to be either on the left or the
right.
Alternating row colors
Hex Display
The highlight method in the hex dump display for the selected protocol item can be set to
use either inverse video, or bold characters.
Toolbar style
Filter toolbar placement
Custom window title
Column Preferences
The Columns page lets you specify the number, title, and format of each column in the packet
list.
The Column title entry is used to specify the title of the column displayed at the top of the
packet list. The type of data that the column displays can be specified using the Column
format option menu. The row of buttons on the left perform the following actions:
New Adds a new column to the list.
Delete
Deletes the currently selected list item.
Up / Down
Moves the selected list item up or down one position.
Font Preferences
The Font page lets you select the font to be used for most text.
Color Preferences
The Colors page can be used to change the color of the text displayed in the TCP stream window
and for marked packets. To change a color, simply select an attribute from the "Set:" menu and
use the color selector to get the desired color. The new text colors are displayed as a sample
text.
Capture Preferences
The Capture page lets you specify various parameters for capturing live packet data; these are
used the first time a capture is started.
The Interface: combo box lets you specify the interface from which to capture packet data, or
the name of a FIFO from which to get the packet data.
The Data link type: option menu lets you, for some interfaces, select the data link header you
want to see on the packets you capture. For example, in some OSes and with some versions of
libpcap, you can choose, on an 802.11 interface, whether the packets should appear as Ethernet
packets (with a fake Ethernet header) or as 802.11 packets.
The Limit each packet to ... bytes check box lets you set the snapshot length to use when
capturing live data; turn on the check box, and then set the number of bytes to use as the
snapshot length.
The Filter: text entry lets you set a capture filter expression to be used when capturing.
If any of the environment variables SSH_CONNECTION, SSH_CLIENT, REMOTEHOST, DISPLAY, or
SESSIONNAME are set, Wireshark will create a default capture filter that excludes traffic from
the hosts and ports defined in those variables.
The Capture packets in promiscuous mode check box lets you specify whether to put the interface
in promiscuous mode when capturing.
The Update list of packets in real time check box lets you specify that the display should be
updated as packets are seen.
The Automatic scrolling in live capture check box lets you specify whether, in an "Update list
of packets in real time" capture, the packet list pane should automatically scroll to show the
most recently captured packets.
Printing Preferences
The radio buttons at the top of the Printing page allow you choose between printing packets
with the File:Print Packet menu item as text or PostScript, and sending the output directly to
a command or saving it to a file. The Command: text entry box, on UNIX-compatible systems, is
the command to send files to (usually lpr), and the File: entry box lets you enter the name of
the file you wish to save to. Additionally, you can select the File: button to browse the file
system for a particular save file.
Name Resolution Preferences
The Enable MAC name resolution, Enable network name resolution and Enable transport name
resolution check boxes let you specify whether MAC addresses, network addresses, and transport-
layer port numbers should be translated to names.
The Enable concurrent DNS name resolution allows Wireshark to send out multiple name resolution
requests and not wait for the result before continuing dissection. This speeds up dissection
with network name resolution but initially may miss resolutions. The number of concurrent
requests can be set here as well.
SMI paths
SMI modules
RTP Player Preferences
This page allows you to select the number of channels visible in the RTP player window. It
determines the height of the window, more channels are possible and visible by means of a
scroll bar.
Protocol Preferences
There are also pages for various protocols that Wireshark dissects, controlling the way
Wireshark handles those protocols.
Edit Capture Filter List
Edit Display Filter List
Capture Filter
Display Filter
Read Filter
Search Filter
The Edit Capture Filter List dialog lets you create, modify, and delete capture filters, and the Edit
Display Filter List dialog lets you create, modify, and delete display filters.
The Capture Filter dialog lets you do all of the editing operations listed, and also lets you choose
or construct a filter to be used when capturing packets.
The Display Filter dialog lets you do all of the editing operations listed, and also lets you choose
or construct a filter to be used to filter the current capture being viewed.
The Read Filter dialog lets you do all of the editing operations listed, and also lets you choose or
construct a filter to be used to as a read filter for a capture file you open.
The Search Filter dialog lets you do all of the editing operations listed, and also lets you choose
or construct a filter expression to be used in a find operation.
In all of those dialogs, the Filter name entry specifies a descriptive name for a filter, e.g. Web
and DNS traffic. The Filter string entry is the text that actually describes the filtering action to
take, as described above.The dialog buttons perform the following actions:
New If there is text in the two entry boxes, creates a new associated list item.
Edit Modifies the currently selected list item to match what's in the entry boxes.
Delete
Deletes the currently selected list item.
Add Expression...
For display filter expressions, pops up a dialog box to allow you to construct a filter
expression to test a particular field; it offers lists of field names, and, when appropriate,
lists from which to select tests to perform on the field and values with which to compare it.
In that dialog box, the OK button will cause the filter expression you constructed to be
entered into the Filter string entry at the current cursor position.
OK In the Capture Filter dialog, closes the dialog box and makes the filter in the Filter string
entry the filter in the Capture Preferences dialog. In the Display Filter dialog, closes the
dialog box and makes the filter in the Filter string entry the current display filter, and
applies it to the current capture. In the Read Filter dialog, closes the dialog box and makes
the filter in the Filter string entry the filter in the Open Capture File dialog. In the
Search Filter dialog, closes the dialog box and makes the filter in the Filter string entry the
filter in the Find Packet dialog.
Apply Makes the filter in the Filter string entry the current display filter, and applies it to the
current capture.
Save If the list of filters being edited is the list of capture filters, saves the current filter
list to the personal capture filters file, and if the list of filters being edited is the list
of display filters, saves the current filter list to the personal display filters file.
Close Closes the dialog without doing anything with the filter in the Filter string entry.
The Color Filters Dialog
This dialog displays a list of color filters and allows it to be modified.
THE FILTER LIST
Single rows may be selected by clicking. Multiple rows may be selected by using the ctrl and
shift keys in combination with the mouse button.
NEW Adds a new filter at the bottom of the list and opens the Edit Color Filter dialog box. You will
have to alter the filter expression at least before the filter will be accepted. The format of
color filter expressions is identical to that of display filters. The new filter is selected, so
it may immediately be moved up and down, deleted or edited. To avoid confusion all filters are
unselected before the new filter is created.
EDIT
Opens the Edit Color Filter dialog box for the selected filter. (If this button is disabled you
may have more than one filter selected, making it ambiguous which is to be edited.)
ENABLE
Enables the selected color filter(s).
DISABLE
Disables the selected color filter(s).
DELETE
Deletes the selected color filter(s).
EXPORT
Allows you to choose a file in which to save the current list of color filters. You may also
choose to save only the selected filters. A button is provided to save the filters in the global
color filters file (you must have sufficient permissions to write this file, of course).
IMPORT
Allows you to choose a file containing color filters which are then added to the bottom of the
current list. All the added filters are selected, so they may be moved to the correct position
in the list as a group. To avoid confusion, all filters are unselected before the new filters
are imported. A button is provided to load the filters from the global color filters file.
CLEAR
Deletes your personal color filters file, reloads the global color filters file, if any, and
closes the dialog.
UP Moves the selected filter(s) up the list, making it more likely that they will be used to color
packets.
DOWN
Moves the selected filter(s) down the list, making it less likely that they will be used to color
packets.
OK Closes the dialog and uses the color filters as they stand.
APPLY
Colors the packets according to the current list of color filters, but does not close the dialog.
SAVE
Saves the current list of color filters in your personal color filters file. Unless you do this
they will not be used the next time you start Wireshark.
CLOSE
Closes the dialog without changing the coloration of the packets. Note that changes you have
made to the current list of color filters are not undone.
Capture Options Dialog
The Capture Options Dialog lets you specify various parameters for capturing live packet data.
The Interface: field lets you specify the interface from which to capture packet data or a command
from which to get the packet data via a pipe.
The Link layer header type: field lets you specify the interfaces link layer header type. This field
is usually disabled, as most interface have only one header type.
The Capture packets in promiscuous mode check box lets you specify whether the interface should be
put into promiscuous mode when capturing.
The Limit each packet to ... bytes check box and field lets you specify a maximum number of bytes per
packet to capture and save; if the check box is not checked, the limit will be 262144 bytes.
The Capture Filter: entry lets you specify the capture filter using a tcpdump-style filter string as
described above.
The File: entry lets you specify the file into which captured packets should be saved, as in the
Printer Options dialog above. If not specified, the captured packets will be saved in a temporary
file; you can save those packets to a file with the File:Save As menu item.
The Use multiple files check box lets you specify that the capture should be done in "multiple files"
mode. This option is disabled, if the Update list of packets in real time option is checked.
The Next file every ... megabyte(s) check box and fields lets you specify that a switch to a next
file should be done if the specified filesize is reached. You can also select the appropriate unit,
but beware that the filesize has a maximum of 2 GiB. The check box is forced to be checked, as
"multiple files" mode requires a file size to be specified.
The Next file every ... minute(s) check box and fields lets you specify that the switch to a next
file should be done after the specified time has elapsed, even if the specified capture size is not
reached.
The Ring buffer with ... files field lets you specify the number of files of a ring buffer. This
feature will capture into the first file again, after the specified number of files have been used.
The Stop capture after ... files field lets you specify the number of capture files used, until the
capture is stopped.
The Stop capture after ... packet(s) check box and field let you specify that Wireshark should stop
capturing after having captured some number of packets; if the check box is not checked, Wireshark
will not stop capturing at some fixed number of captured packets.
The Stop capture after ... megabyte(s) check box and field lets you specify that Wireshark should
stop capturing after the file to which captured packets are being saved grows as large as or larger
than some specified number of megabytes. If the check box is not checked, Wireshark will not stop
capturing at some capture file size (although the operating system on which Wireshark is running, or
the available disk space, may still limit the maximum size of a capture file). This option is
disabled, if "multiple files" mode is used,
The Stop capture after ... second(s) check box and field let you specify that Wireshark should stop
capturing after it has been capturing for some number of seconds; if the check box is not checked,
Wireshark will not stop capturing after some fixed time has elapsed.
The Update list of packets in real time check box lets you specify whether the display should be
updated as packets are captured and, if you specify that, the Automatic scrolling in live capture
check box lets you specify the packet list pane should automatically scroll to show the most recently
captured packets as new packets arrive.
The Enable MAC name resolution, Enable network name resolution and Enable transport name resolution
check boxes let you specify whether MAC addresses, network addresses, and transport-layer port
numbers should be translated to names.
About
The About dialog lets you view various information about Wireshark.
About:Wireshark
The Wireshark page lets you view general information about Wireshark, like the installed version,
licensing information and such.
About:Authors
The Authors page shows the author and all contributors.
About:Folders
The Folders page lets you view the directory names where Wireshark is searching it's various
configuration and other files.
About:Plugins
The Plugins page lets you view the dissector plugin modules available on your system.
The Plugins List shows the name and version of each dissector plugin module found on your system.
On Unix-compatible systems, the plugins are looked for in the following directories: the
lib/wireshark/plugins/$VERSION directory under the main installation directory (for example,
/usr/local/lib/wireshark/plugins/$VERSION), and then $HOME/.wireshark/plugins.
On Windows systems, the plugins are looked for in the following directories: plugins\$VERSION
directory under the main installation directory (for example, C:\Program
Files\Wireshark\plugins\$VERSION), and then %APPDATA%\Wireshark\plugins\$VERSION (or, if %APPDATA%
isn't defined, %USERPROFILE%\Application Data\Wireshark\plugins\$VERSION).
$VERSION is the version number of the plugin interface, which is typically the version number of
Wireshark. Note that a dissector plugin module may support more than one protocol; there is not
necessarily a one-to-one correspondence between dissector plugin modules and protocols. Protocols
supported by a dissector plugin module are enabled and disabled using the Edit:Protocols dialog box,
just as protocols built into Wireshark are.
CAPTURE FILTER SYNTAX
See the manual page of pcap-filter(7) or, if that doesn't exist, tcpdump(8), or, if that doesn't exist,
<https://wiki.wireshark.org/CaptureFilters>.
DISPLAY FILTER SYNTAX
For a complete table of protocol and protocol fields that are filterable in Wireshark see the
wireshark-filter(4) manual page.
FILES
These files contains various Wireshark configuration settings.
Preferences
The preferences files contain global (system-wide) and personal preference settings. If the system-
wide preference file exists, it is read first, overriding the default settings. If the personal
preferences file exists, it is read next, overriding any previous values. Note: If the command line
flag -o is used (possibly more than once), it will in turn override values from the preferences
files.
The preferences settings are in the form prefname:value, one per line, where prefname is the name of
the preference and value is the value to which it should be set; white space is allowed between : and
value. A preference setting can be continued on subsequent lines by indenting the continuation lines
with white space. A # character starts a comment that runs to the end of the line:
# Vertical scrollbars should be on right side?
# TRUE or FALSE (case-insensitive).
gui.scrollbar_on_right: TRUE
The global preferences file is looked for in the wireshark directory under the share subdirectory of
the main installation directory (for example, /usr/local/share/wireshark/preferences) on UNIX-
compatible systems, and in the main installation directory (for example, C:\Program
Files\Wireshark\preferences) on Windows systems.
The personal preferences file is looked for in $XDG_CONFIG_HOME/wireshark/preferences (or, if
$XDG_CONFIG_HOME/wireshark does not exist while $HOME/.wireshark is present,
$HOME/.wireshark/preferences) on UNIX-compatible systems and %APPDATA%\Wireshark\preferences (or, if
%APPDATA% isn't defined, %USERPROFILE%\Application Data\Wireshark\preferences) on Windows systems.
Note: Whenever the preferences are saved by using the Save button in the Edit:Preferences dialog box,
your personal preferences file will be overwritten with the new settings, destroying any comments and
unknown/obsolete settings that were in the file.
Recent
The recent file contains personal settings (mostly GUI related) such as the current Wireshark window
size. The file is saved at program exit and read in at program start automatically. Note: The
command line flag -o may be used to override settings from this file.
The settings in this file have the same format as in the preferences files, and the same directory as
for the personal preferences file is used.
Note: Whenever Wireshark is closed, your recent file will be overwritten with the new settings,
destroying any comments and unknown/obsolete settings that were in the file.
Disabled (Enabled) Protocols
The disabled_protos files contain system-wide and personal lists of protocols that have been
disabled, so that their dissectors are never called. The files contain protocol names, one per line,
where the protocol name is the same name that would be used in a display filter for the protocol:
http
tcp # a comment
If a protocol is listed in the global disabled_protos file, it is not displayed in the
Analyze:Enabled Protocols dialog box, and so cannot be enabled by the user.
The global disabled_protos file uses the same directory as the global preferences file.
The personal disabled_protos file uses the same directory as the personal preferences file.
Note: Whenever the disabled protocols list is saved by using the Save button in the Analyze:Enabled
Protocols dialog box, your personal disabled protocols file will be overwritten with the new
settings, destroying any comments that were in the file.
Name Resolution (hosts)
If the personal hosts file exists, it is used to resolve IPv4 and IPv6 addresses before any other
attempts are made to resolve them. The file has the standard hosts file syntax; each line contains
one IP address and name, separated by whitespace. The same directory as for the personal preferences
file is used.
Capture filter name resolution is handled by libpcap on UNIX-compatible systems and WinPcap on
Windows. As such the Wireshark personal hosts file will not be consulted for capture filter name
resolution.
Name Resolution (subnets)
If an IPv4 address cannot be translated via name resolution (no exact match is found) then a partial
match is attempted via the subnets file. Both the global subnets file and personal subnets files are
used if they exist.
Each line of this file consists of an IPv4 address, a subnet mask length separated only by a / and a
name separated by whitespace. While the address must be a full IPv4 address, any values beyond the
mask length are subsequently ignored.
An example is:
# Comments must be prepended by the # sign! 192.168.0.0/24 ws_test_network
A partially matched name will be printed as "subnet-name.remaining-address". For example,
"192.168.0.1" under the subnet above would be printed as "ws_test_network.1"; if the mask length
above had been 16 rather than 24, the printed address would be ``ws_test_network.0.1".
Name Resolution (ethers)
The ethers files are consulted to correlate 6-byte hardware addresses to names. First the personal
ethers file is tried and if an address is not found there the global ethers file is tried next.
Each line contains one hardware address and name, separated by whitespace. The digits of the
hardware address are separated by colons (:), dashes (-) or periods (.). The same separator
character must be used consistently in an address. The following three lines are valid lines of an
ethers file:
ff:ff:ff:ff:ff:ff Broadcast
c0-00-ff-ff-ff-ff TR_broadcast
00.00.00.00.00.00 Zero_broadcast
The global ethers file is looked for in the /etc directory on UNIX-compatible systems, and in the
main installation directory (for example, C:\Program Files\Wireshark) on Windows systems.
The personal ethers file is looked for in the same directory as the personal preferences file.
Capture filter name resolution is handled by libpcap on UNIX-compatible systems and WinPcap on
Windows. As such the Wireshark personal ethers file will not be consulted for capture filter name
resolution.
Name Resolution (manuf)
The manuf file is used to match the 3-byte vendor portion of a 6-byte hardware address with the
manufacturer's name; it can also contain well-known MAC addresses and address ranges specified with a
netmask. The format of the file is the same as the ethers files, except that entries such as:
00:00:0C Cisco
can be provided, with the 3-byte OUI and the name for a vendor, and entries such as:
00-00-0C-07-AC/40 All-HSRP-routers
can be specified, with a MAC address and a mask indicating how many bits of the address must match.
The above entry, for example, has 40 significant bits, or 5 bytes, and would match addresses from
00-00-0C-07-AC-00 through 00-00-0C-07-AC-FF. The mask need not be a multiple of 8.
The manuf file is looked for in the same directory as the global preferences file.
Name Resolution (services)
The services file is used to translate port numbers into names. Both the global services file and
personal services files are used if they exist.
The file has the standard services file syntax; each line contains one (service) name and one
transport identifier separated by white space. The transport identifier includes one port number and
one transport protocol name (typically tcp, udp, or sctp) separated by a /.
An example is:
mydns 5045/udp # My own Domain Name Server mydns 5045/tcp # My own Domain Name
Server
Name Resolution (ipxnets)
The ipxnets files are used to correlate 4-byte IPX network numbers to names. First the global
ipxnets file is tried and if that address is not found there the personal one is tried next.
The format is the same as the ethers file, except that each address is four bytes instead of six.
Additionally, the address can be represented as a single hexadecimal number, as is more common in the
IPX world, rather than four hex octets. For example, these four lines are valid lines of an ipxnets
file:
C0.A8.2C.00 HR
c0-a8-1c-00 CEO
00:00:BE:EF IT_Server1
110f FileServer3
The global ipxnets file is looked for in the /etc directory on UNIX-compatible systems, and in the
main installation directory (for example, C:\Program Files\Wireshark) on Windows systems.
The personal ipxnets file is looked for in the same directory as the personal preferences file.
Capture Filters
The cfilters files contain system-wide and personal capture filters. Each line contains one filter,
starting with the string displayed in the dialog box in quotation marks, followed by the filter
string itself:
"HTTP" port 80
"DCERPC" port 135
The global cfilters file uses the same directory as the global preferences file.
The personal cfilters file uses the same directory as the personal preferences file. It is written
through the Capture:Capture Filters dialog.
If the global cfilters file exists, it is used only if the personal cfilters file does not exist;
global and personal capture filters are not merged.
Display Filters
The dfilters files contain system-wide and personal display filters. Each line contains one filter,
starting with the string displayed in the dialog box in quotation marks, followed by the filter
string itself:
"HTTP" http
"DCERPC" dcerpc
The global dfilters file uses the same directory as the global preferences file.
The personal dfilters file uses the same directory as the personal preferences file. It is written
through the Analyze:Display Filters dialog.
If the global dfilters file exists, it is used only if the personal dfilters file does not exist;
global and personal display filters are not merged.
Color Filters (Coloring Rules)
The colorfilters files contain system-wide and personal color filters. Each line contains one
filter, starting with the string displayed in the dialog box, followed by the corresponding display
filter. Then the background and foreground colors are appended:
# a comment
@tcp@tcp@[59345,58980,65534][0,0,0]
@udp@udp@[28834,57427,65533][0,0,0]
The global colorfilters file uses the same directory as the global preferences file.
The personal colorfilters file uses the same directory as the personal preferences file. It is
written through the View:Coloring Rules dialog.
If the global colorfilters file exists, it is used only if the personal colorfilters file does not
exist; global and personal color filters are not merged.
GTK rc files
The gtkrc files contain system-wide and personal GTK theme settings.
The global gtkrc file uses the same directory as the global preferences file.
The personal gtkrc file uses the same directory as the personal preferences file.
Plugins
See above in the description of the About:Plugins page.
ENVIRONMENT VARIABLES
WIRESHARK_APPDATA
On Windows, Wireshark normally stores all application data in %APPDATA% or %USERPROFILE%. You can
override the default location by exporting this environment variable to specify an alternate
location.
WIRESHARK_DEBUG_WMEM_OVERRIDE
Setting this environment variable forces the wmem framework to use the specified allocator backend
for *all* allocations, regardless of which backend is normally specified by the code. This is mainly
useful to developers when testing or debugging. See README.wmem in the source distribution for
details.
WIRESHARK_RUN_FROM_BUILD_DIRECTORY
This environment variable causes the plugins and other data files to be loaded from the build
directory (where the program was compiled) rather than from the standard locations. It has no effect
when the program in question is running with root (or setuid) permissions on *NIX.
WIRESHARK_DATA_DIR
This environment variable causes the various data files to be loaded from a directory other than the
standard locations. It has no effect when the program in question is running with root (or setuid)
permissions on *NIX.
ERF_RECORDS_TO_CHECK
This environment variable controls the number of ERF records checked when deciding if a file really
is in the ERF format. Setting this environment variable a number higher than the default (20) would
make false positives less likely.
IPFIX_RECORDS_TO_CHECK
This environment variable controls the number of IPFIX records checked when deciding if a file really
is in the IPFIX format. Setting this environment variable a number higher than the default (20)
would make false positives less likely.
WIRESHARK_ABORT_ON_DISSECTOR_BUG
If this environment variable is set, Wireshark will call abort(3) when a dissector bug is
encountered. abort(3) will cause the program to exit abnormally; if you are running Wireshark in a
debugger, it should halt in the debugger and allow inspection of the process, and, if you are not
running it in a debugger, it will, on some OSes, assuming your environment is configured correctly,
generate a core dump file. This can be useful to developers attempting to troubleshoot a problem
with a protocol dissector.
WIRESHARK_ABORT_ON_TOO_MANY_ITEMS
If this environment variable is set, Wireshark will call abort(3) if a dissector tries to add too
many items to a tree (generally this is an indication of the dissector not breaking out of a loop
soon enough). abort(3) will cause the program to exit abnormally; if you are running Wireshark in a
debugger, it should halt in the debugger and allow inspection of the process, and, if you are not
running it in a debugger, it will, on some OSes, assuming your environment is configured correctly,
generate a core dump file. This can be useful to developers attempting to troubleshoot a problem
with a protocol dissector.
WIRESHARK_QUIT_AFTER_CAPTURE
Cause Wireshark to exit after the end of the capture session. This doesn't automatically start a
capture; you must still use -k to do that. You must also specify an autostop condition, e.g. -c or
-a duration:.... This means that you will not be able to see the results of the capture after it
stops; it's primarily useful for testing.
SEE ALSO
wireshark-filter(4), tshark(1), editcap(1), pcap(3), dumpcap(1), mergecap(1), text2pcap(1),
pcap-filter(7) or tcpdump(8)
NOTES
The latest version of Wireshark can be found at <https://www.wireshark.org>.
HTML versions of the Wireshark project man pages are available at:
<https://www.wireshark.org/docs/man-pages>.
AUTHORS
Original Author
-------- ------
Gerald Combs <gerald[AT]wireshark.org>
Contributors
------------
Gilbert Ramirez <gram[AT]alumni.rice.edu>
Thomas Bottom <tom.bottom[AT]labxtechnologies.com>
Chris Pane <chris.pane[AT]labxtechnologies.com>
Hannes R. Boehm <hannes[AT]boehm.org>
Mike Hall <mike[AT]hallzone.net>
Bobo Rajec <bobo[AT]bsp-consulting.sk>
Laurent Deniel <laurent.deniel[AT]free.fr>
Don Lafontaine <lafont02[AT]cn.ca>
Guy Harris <guy[AT]alum.mit.edu>
Simon Wilkinson <sxw[AT]dcs.ed.ac.uk>
Joerg Mayer <jmayer[AT]loplof.de>
Martin Maciaszek <fastjack[AT]i-s-o.net>
Didier Jorand <Didier.Jorand[AT]alcatel.fr>
Jun-ichiro itojun Hagino <itojun[AT]itojun.org>
Richard Sharpe <realrichardsharpe[AT]gmail.com>
John McDermott <jjm[AT]jkintl.com>
Jeff Jahr <jjahr[AT]shastanets.com>
Brad Robel-Forrest <bradr[AT]watchguard.com>
Ashok Narayanan <ashokn[AT]cisco.com>
Aaron Hillegass <aaron[AT]classmax.com>
Jason Lango <jal[AT]netapp.com>
Johan Feyaerts <Johan.Feyaerts[AT]siemens.com>
Olivier Abad <oabad[AT]noos.fr>
Thierry Andry <Thierry.Andry[AT]advalvas.be>
Jeff Foster <jfoste[AT]woodward.com>
Peter Torvals <petertv[AT]xoommail.com>
Christophe Tronche <ch.tronche[AT]computer.org>
Nathan Neulinger <nneul[AT]umr.edu>
Tomislav Vujec <tvujec[AT]carnet.hr>
Kojak <kojak[AT]bigwig.net>
Uwe Girlich <Uwe.Girlich[AT]philosys.de>
Warren Young <tangent[AT]mail.com>
Heikki Vatiainen <hessu[AT]cs.tut.fi>
Greg Hankins <gregh[AT]twoguys.org>
Jerry Talkington <jtalkington[AT]users.sourceforge.net>
Dave Chapeskie <dchapes[AT]ddm.on.ca>
James Coe <jammer[AT]cin.net>
Bert Driehuis <driehuis[AT]playbeing.org>
Stuart Stanley <stuarts[AT]mxmail.net>
John Thomes <john[AT]ensemblecom.com>
Laurent Cazalet <laurent.cazalet[AT]mailclub.net>
Thomas Parvais <thomas.parvais[AT]advalvas.be>
Gerrit Gehnen <G.Gehnen[AT]atrie.de>
Craig Newell <craign[AT]cheque.uq.edu.au>
Ed Meaney <emeaney[AT]cisco.com>
Dietmar Petras <DPetras[AT]ELSA.de>
Fred Reimer <fwr[AT]ga.prestige.net>
Florian Lohoff <flo[AT]rfc822.org>
Jochen Friedrich <jochen+ethereal[AT]scram.de>
Paul Welchinski <paul.welchinski[AT]telusplanet.net>
Doug Nazar <nazard[AT]dragoninc.on.ca>
Andreas Sikkema <h323[AT]ramdyne.nl>
Mark Muhlestein <mmm[AT]netapp.com>
Graham Bloice <graham.bloice[AT]trihedral.com>
Ralf Schneider <ralf.schneider[AT]alcatel.se>
Yaniv Kaul <mykaul[AT]gmail.com>
Paul Ionescu <paul[AT]acorp.ro>
Mark Burton <markb[AT]ordern.com>
Stefan Raab <sraab[AT]cisco.com>
Mark Clayton <clayton[AT]shore.net>
Michael Rozhavsky <mike[AT]tochna.technion.ac.il>
Dug Song <dugsong[AT]monkey.org>
Michael Tuexen <tuexen[AT]wireshark.org>
Bruce Korb <bkorb[AT]sco.com>
Jose Pedro Oliveira <jpo[AT]di.uminho.pt>
David Frascone <dave[AT]frascone.com>
Peter Kjellerstedt <pkj[AT]axis.com>
Phil Techau <phil_t[AT]altavista.net>
Wes Hardaker <hardaker[AT]users.sourceforge.net>
Robert Tsai <rtsai[AT]netapp.com>
Craig Metz <cmetz[AT]inner.net>
Per Flock <per.flock[AT]axis.com>
Jack Keane <jkeane[AT]OpenReach.com>
Brian Wellington <bwelling[AT]xbill.org>
Santeri Paavolainen <santtu[AT]ssh.com>
Ulrich Kiermayr <uk[AT]ap.univie.ac.at>
Neil Hunter <neil.hunter[AT]energis-squared.com>
Ralf Holzer <ralf[AT]well.com>
Craig Rodrigues <rodrigc[AT]attbi.com>
Ed Warnicke <hagbard[AT]physics.rutgers.edu>
Johan Jorgensen <johan.jorgensen[AT]axis.com>
Frank Singleton <frank.singleton[AT]ericsson.com>
Kevin Shi <techishi[AT]ms22.hinet.net>
Mike Frisch <mfrisch[AT]isurfer.ca>
Burke Lau <burke_lau[AT]agilent.com>
Martti Kuparinen <martti.kuparinen[AT]iki.fi>
David Hampton <dhampton[AT]mac.com>
Kent Engstroem <kent[AT]unit.liu.se>
Ronnie Sahlberg <ronniesahlberg[AT]gmail.com>
Borosa Tomislav <tomislav.borosa[AT]SIEMENS.HR>
Alexandre P. Ferreira <alexandref[AT]tcoip.com.br>
Simharajan Srishylam <Simharajan.Srishylam[AT]netapp.com>
Greg Kilfoyle <gregk[AT]redback.com>
James E. Flemer <jflemer[AT]acm.jhu.edu>
Peter Lei <peterlei[AT]cisco.com>
Thomas Gimpel <thomas.gimpel[AT]ferrari.de>
Albert Chin <china[AT]thewrittenword.com>
Charles Levert <charles[AT]comm.polymtl.ca>
Todd Sabin <tas[AT]webspan.net>
Eduardo Perez Ureta <eperez[AT]dei.inf.uc3m.es>
Martin Thomas <martin_a_thomas[AT]yahoo.com>
Hartmut Mueller <hartmut[AT]wendolene.ping.de>
Michal Melerowicz <Michal.Melerowicz[AT]nokia.com>
Hannes Gredler <hannes[AT]juniper.net>
Inoue <inoue[AT]ainet.or.jp>
Olivier Biot <obiot.ethereal[AT]gmail.com>
Patrick Wolfe <pjw[AT]zocalo.cellular.ameritech.com>
Martin Held <Martin.Held[AT]icn.siemens.de>
Riaan Swart <rswart[AT]cs.sun.ac.za>
Christian Lacunza <celacunza[AT]gmx.net>
Scott Renfro <scott[AT]renfro.org>
Juan Toledo <toledo[AT]users.sourceforge.net>
Jean-Christian Pennetier <jeanchristian.pennetier[AT]rd.francetelecom.fr>
Jian Yu <bgp4news[AT]yahoo.com>
Eran Mann <emann[AT]opticalaccess.com>
Andy Hood <ajhood[AT]fl.net.au>
Randy McEoin <rmceoin[AT]ahbelo.com>
Edgar Iglesias <edgar.iglesias[AT]axis.com>
Martina Obermeier <Martina.Obermeier[AT]icn.siemens.de>
Javier Achirica <achirica[AT]ttd.net>
B. Johannessen <bob[AT]havoq.com>
Thierry Pelle <thierry.pelle[AT]laposte.net>
Francisco Javier Cabello <fjcabello[AT]vtools.es>
Laurent Rabret <laurent.rabret[AT]rd.francetelecom.fr>
nuf si <gnippiks[AT]yahoo.com>
Jeff Morriss <jeff.morriss.ws[AT]gmail.com>
Aamer Akhter <aakhter[AT]cisco.com>
Pekka Savola <pekkas[AT]netcore.fi>
David Eisner <deisner[AT]gmail.com>
Steve Dickson <steved[AT]talarian.com>
Markus Seehofer <Markus.Seehofer[AT]hirschmann.de>
Lee Berger <lberger[AT]roy.org>
Motonori Shindo <motonori[AT]shin.do>
Terje Krogdahl <tekr[AT]nextra.com>
Jean-Francois Mule <jfm[AT]cablelabs.com>
Thomas Wittwer <thomas.wittwer[AT]iclip.ch>
Matthias Nyffenegger <matthias.nyffenegger[AT]iclip.ch>
Palle Lyckegaard <Palle[AT]lyckegaard.dk>
Nicolas Balkota <balkota[AT]mac.com>
Tom Uijldert <Tom.Uijldert[AT]cmg.nl>
Akira Endoh <endoh[AT]netmarks.co.jp>
Graeme Hewson <ghewson[AT]wormhole.me.uk>
Pasi Eronen <pe[AT]iki.fi>
Georg von Zezschwitz <gvz[AT]2scale.net>
Steffen Weinreich <steve[AT]weinreich.org>
Marc Milgram <ethereal[AT]mmilgram.NOSPAMmail.net>
Gordon McKinney <gordon[AT]night-ray.com>
Pavel Novotny <Pavel.Novotny[AT]icn.siemens.de>
Shinsuke Suzuki <suz[AT]kame.net>
Andrew C. Feren <acferen[AT]yahoo.com>
Tomas Kukosa <tomas.kukosa[AT]siemens.com>
Andreas Stockmeier <a.stockmeier[AT]avm.de>
Pekka Nikander <pekka.nikander[AT]nomadiclab.com>
Hamish Moffatt <hamish[AT]cloud.net.au>
Kazushi Sugyo <k-sugyou[AT]nwsl.mesh.ad.jp>
Tim Potter <tpot[AT]samba.org>
Raghu Angadi <rangadi[AT]inktomi.com>
Taisuke Sasaki <sasaki[AT]soft.net.fujitsu.co.jp>
Tim Newsham <newsham[AT]lava.net>
Tom Nisbet <Tnisbet[AT]VisualNetworks.com>
Darren New <dnew[AT]san.rr.com>
Pavel Mores <pvl[AT]uh.cz>
Bernd Becker <bb[AT]bernd-becker.de>
Heinz Prantner <Heinz.Prantner[AT]radisys.com>
Irfan Khan <ikhan[AT]qualcomm.com>
Jayaram V.R <vjayar[AT]cisco.com>
Dinesh Dutt <ddutt[AT]cisco.com>
Nagarjuna Venna <nvenna[AT]Brixnet.com>
Jirka Novak <j.novak[AT]netsystem.cz>
Ricardo Barroetaven~a <rbarroetavena[AT]veufort.com>
Alan Harrison <alanharrison[AT]mail.com>
Mike Frantzen <frantzen[AT]w4g.org>
Charlie Duke <cduke[AT]fvc.com>
Alfred Arnold <Alfred.Arnold[AT]elsa.de>
Dermot Bradley <dermot.bradley[AT]openwave.com>
Adam Sulmicki <adam[AT]cfar.umd.edu>
Kari Tiirikainen <kari.tiirikainen[AT]nokia.com>
John Mackenzie <John.A.Mackenzie[AT]t-online.de>
Peter Valchev <pvalchev[AT]openbsd.org>
Alex Rozin <Arozin[AT]mrv.com>
Jouni Malinen <jkmaline[AT]cc.hut.fi>
Paul E. Erkkila <pee[AT]erkkila.org>
Jakob Schlyter <jakob[AT]openbsd.org>
Jim Sienicki <sienicki[AT]issanni.com>
Steven French <sfrench[AT]us.ibm.com>
Diana Eichert <deicher[AT]sandia.gov>
Blair Cooper <blair[AT]teamon.com>
Kikuchi Ayamura <ayamura[AT]ayamura.org>
Didier Gautheron <dgautheron[AT]magic.fr>
Phil Williams <csypbw[AT]comp.leeds.ac.uk>
Kevin Humphries <khumphries[AT]networld.com>
Erik Nordstroem <erik.nordstrom[AT]it.uu.se>
Devin Heitmueller <dheitmueller[AT]netilla.com>
Chenjiang Hu <chu[AT]chiaro.com>
Kan Sasaki <sasaki[AT]fcc.ad.jp>
Stefan Wenk <stefan.wenk[AT]gmx.at>
Ruud Linders <ruud[AT]lucent.com>
Andrew Esh <Andrew.Esh[AT]tricord.com>
Greg Morris <GMORRIS[AT]novell.com>
Dirk Steinberg <dws[AT]dirksteinberg.de>
Kari Heikkila <kari.o.heikkila[AT]nokia.com>
Olivier Dreux <Olivier.Dreux[AT]alcatel.fr>
Michael Stiller <ms[AT]2scale.net>
Antti Tuominen <ajtuomin[AT]tml.hut.fi>
Martin Gignac <lmcgign[AT]mobilitylab.net>
John Wells <wells[AT]ieee.org>
Loic Tortay <tortay[AT]cc.in2p3.fr>
Steve Housley <Steve_Housley[AT]eur.3com.com>
Peter Hawkins <peter[AT]hawkins.emu.id.au>
Bill Fumerola <billf[AT]FreeBSD.org>
Chris Waters <chris[AT]waters.co.nz>
Solomon Peachy <pizza[AT]shaftnet.org>
Jaime Fournier <Jaime.Fournier[AT]hush.com>
Markus Steinmann <ms[AT]seh.de>
Tsutomu Mieno <iitom[AT]utouto.com>
Yasuhiro Shirasaki <yasuhiro[AT]gnome.gr.jp>
Anand V. Narwani <anand[AT]narwani.org>
Christopher K. St. John <cks[AT]distributopia.com>
Nix <nix[AT]esperi.demon.co.uk>
Liviu Daia <Liviu.Daia[AT]imar.ro>
Richard Urwin <richard[AT]soronlin.org.uk>
Prabhakar Krishnan <Prabhakar.Krishnan[AT]netapp.com>
Jim McDonough <jmcd[AT]us.ibm.com>
Sergei Shokhor <sshokhor[AT]uroam.com>
Hidetaka Ogawa <ogawa[AT]bs2.qnes.nec.co.jp>
Jan Kratochvil <short[AT]ucw.cz>
Alfred Koebler <ak[AT]icon-sult.de>
Vassilii Khachaturov <Vassilii.Khachaturov[AT]comverse.com>
Bill Studenmund <wrstuden[AT]wasabisystems.com>
Brian Bruns <camber[AT]ais.org>
Flavio Poletti <flavio[AT]polettix.it>
Marcus Haebler <haeblerm[AT]yahoo.com>
Ulf Lamping <ulf.lamping[AT]web.de>
Matthew Smart <smart[AT]monkey.org>
Luke Howard <lukeh[AT]au.padl.com>
PC Drew <drewpc[AT]ibsncentral.com>
Renzo Tomas <renzo.toma[AT]xs4all.nl>
Clive A. Stubbings <eth[AT]vjet.demon.co.uk>
Steve Langasek <vorlon[AT]netexpress.net>
Brad Hards <bhards[AT]bigpond.net.au>
cjs 2895 <cjs2895[AT]hotmail.com>
Lutz Jaenicke <Lutz.Jaenicke[AT]aet.TU-Cottbus.DE>
Senthil Kumar Nagappan <sknagappan[AT]yahoo.com>
Jason House <jhouse[AT]mitre.org>
Peter Fales <psfales[AT]lucent.com>
Fritz Budiyanto <fritzb88[AT]yahoo.com>
Jean-Baptiste Marchand <Jean-Baptiste.Marchand[AT]hsc.fr>
Andreas Trauer <andreas.trauer[AT]siemens.com>
Ronald Henderson <Ronald.Henderson[AT]CognicaseUSA.com>
Brian Ginsbach <ginsbach[AT]cray.com>
Dave Richards <d_m_richards[AT]comcast.net>
Martin Regner <martin.regner[AT]chello.se>
Jason Greene <jason[AT]inetgurus.net>
Marco Molteni <mmolteni[AT]cisco.com>
James Harris <jharris[AT]fourhorsemen.org>
rmkml <rmkml[AT]wanadoo.fr>
Anders Broman <anders.broman[AT]ericsson.com>
Christian Falckenberg <christian.falckenberg[AT]nortelnetworks.com>
Huagang Xie <xie[AT]lids.org>
Pasi Kovanen <Pasi.Kovanen[AT]tahoenetworks.fi>
Teemu Rinta-aho <teemu.rinta-aho[AT]nomadiclab.com>
Martijn Schipper <mschipper[AT]globespanvirata.com>
Wayne Parrott <wayne_p[AT]pacific.net.au>
Laurent Meyer <laurent.meyer6[AT]wanadoo.fr>
Lars Roland <Lars.Roland[AT]gmx.net>
Miha Jemec <m.jemec[AT]iskratel.si>
Markus Friedl <markus[AT]openbsd.org>
Todd Montgomery <tmontgom[AT]tibco.com>
emre <emre[AT]flash.net>
Stephen Shelley <steve.shelley[AT]attbi.com>
Erwin Rol <erwin[AT]erwinrol.com>
Duncan Laurie <duncan[AT]sun.com>
Tony Schene <schene[AT]pcisys.net>
Matthijs Melchior <mmelchior[AT]xs4all.nl>
Garth Bushell <gbushell[AT]elipsan.com>
Mark C. Brown <mbrown[AT]hp.com>
Can Erkin Acar <canacar[AT]eee.metu.edu.tr>
Martin Warnes <martin.warnes[AT]ntlworld.com>
J Bruce Fields <bfields[AT]fieldses.org>
tz <tz1[AT]mac.com>
Jeff Liu <jqliu[AT]broadcom.com>
Niels Koot <Niels.Koot[AT]logicacmg.com>
Lionel Ains <lains[AT]gmx.net>
Joakim Wiberg <jow[AT]hms-networks.com>
Jeff Rizzo <riz[AT]boogers.sf.ca.us>
Christoph Wiest <ch.wiest[AT]tesionmail.de>
Xuan Zhang <xz[AT]aemail4u.com>
Thierry Martin <thierry.martin[AT]accellent-group.com>
Oleg Terletsky <oleg.terletsky[AT]comverse.com>
Michael Lum <mlum[AT]telostech.com>
Shiang-Ming Huang <smhuang[AT]pcs.csie.nctu.edu.tw>
Tony Lindstrom <tony.lindstrom[AT]ericsson.com>
Niklas Ogren <niklas.ogren[AT]71.se>
Jesper Peterson <jesper[AT]endace.com>
Giles Scott <gscott[AT]arubanetworks.com>
Vincent Jardin <vincent.jardin[AT]6wind.com>
Jean-Michel Fayard <jean-michel.fayard[AT]moufrei.de>
Josef Korelus <jkor[AT]quick.cz>
Brian K. Teravskis <Brian_Teravskis[AT]Cargill.com>
Nathan Jennings <njgm890[AT]gmail.com>
Hans Viens <hviens[AT]mediatrix.com>
Kevin A. Noll <kevin.noll[AT]versatile.com>
Emanuele Caratti <wiz[AT]libero.it>
Graeme Reid <graeme.reid[AT]norwoodsystems.com>
Lars Ruoff <lars.ruoff[AT]sxb.bsf.alcatel.fr>
Samuel Qu <samuel.qu[AT]utstar.com>
Baktha Muralitharan <muralidb[AT]cisco.com>
Loiec Minier <lool[AT]dooz.org>
Marcel Holtmann <marcel[AT]holtmann.org>
Scott Emberley <scotte[AT]netinst.com>
Brian Fundakowski Feldman <bfeldman[AT]fla.fujitsu.com>
Yuriy Sidelnikov <ysidelnikov[AT]hotmail.com>
Matthias Drochner <M.Drochner[AT]fz-juelich.de>
Dave Sclarsky <dave_sclarsky[AT]cnt.com>
Scott Hovis <scott.hovis[AT]ums.msfc.nasa.gov>
David Fort <david.fort[AT]irisa.fr>
Felix Fei <felix.fei[AT]utstar.com>
Christoph Neusch <christoph.neusch[AT]nortelnetworks.com>
Jan Kiszka <jan.kiszka[AT]web.de>
Joshua Craig Douglas <jdouglas[AT]enterasys.com>
Dick Gooris <gooris[AT]alcatel-lucent.com>
Michael Shuldman <michaels[AT]inet.no>
Tadaaki Nagao <nagao[AT]iij.ad.jp>
Aaron Woo <woo[AT]itd.nrl.navy.mil>
Chris Wilson <chris[AT]mxtelecom.com>
Rolf Fiedler <Rolf.Fiedler[AT]Innoventif.com>
Alastair Maw <ethereal[AT]almaw.com>
Sam Leffler <sam[AT]errno.com>
Martin Mathieson <martin.r.mathieson[AT]googlemail.com>
Christian Wagner <Christian.Wagner[AT]stud.uni-karlsruhe.de>
Edwin Calo <calo[AT]fusemail.com>
Ian Schorr <ischorr[AT]comcast.net>
Rowan McFarland <rmcfarla[AT]cisco.com>
John Engelhart <johne[AT]zang.com>
Ryuji Somegawa <ryuji-so[AT]is.aist-nara.ac.jp>
metatech <metatechbe[AT]gmail.com>
Brian Wheeler <Brian.Wheeler[AT]arrisi.com>
Josh Bailey <joshbailey[AT]lucent.com>
Jelmer Vernooij <jelmer[AT]samba.org>
Duncan Sargeant <dunc-ethereal-dev[AT]rcpt.to>
Love Hoernquist Aastrand <lha[AT]it.su.se>
Lukas Pokorny <maskis[AT]seznam.cz>
Carlos Pignataro <cpignata[AT]cisco.com>
Thomas Anders <thomas.anders[AT]blue-cable.de>
Rich Coe <Richard.Coe[AT]med.ge.com>
Dominic Bechaz <bdo[AT]zhwin.ch>
Richard van der Hoff <richardv[AT]mxtelecom.com>
Shaun Jackman <sjackman[AT]gmail.com>
Jon Oberheide <jon[AT]oberheide.org>
Henry Ptasinski <henryp[AT]broadcom.com>
Roberto Morro <roberto.morro[AT]telecomitalia.it>
Chris Maynard <Christopher.Maynard[AT]GTECH.COM>
SEKINE Hideki <sekineh[AT]gf7.so-net.ne.jp>
Jeff Connelly <shellreef+mp2p[AT]gmail.com>
Irene Ruengeler <ruengeler[AT]wireshark.org>
M. Ortega y Strupp <moys[AT]loplof.de>
Kelly Byrd <kbyrd-ethereal[AT]memcpy.com>
Luis Ontanon <luis.ontanon[AT]gmail.com>
Luca Deri <deri[AT]ntop.org>
Viorel Suman <vsuman[AT]avmob.ro>
Alejandro Vaquero <alejandro.vaquero[AT]verso.com>
Francesco Fondelli <francesco.fondelli[AT]gmail.com>
Artem Tamazov <artem.tamazov[AT]tellabs.com>
Dmitry Trebich <dmitry.trebich[AT]gmail.com>
Bill Meier <wmeier[AT]newsguy.com>
Susanne Edlund <Susanne.Edlund[AT]ericsson.com>
Victor Stratan <hidralisk[AT]yahoo.com>
Peter Johansson <PeterJohansson73[AT]gmail.com>
Stefan Metzmacher <metze[AT]samba.org>
Abhijit Menon-Sen <ams[AT]oryx.com>
James Fields <jvfields[AT]tds.net>
Kevin Johnson <kjohnson[AT]secureideas.net>
Mike Duigou <bondolo[AT]dev.java.net>
Deepak Jain <jain1971[AT]yahoo.com>
Stefano Pettini <spettini[AT]users.sourceforge.net>
Jon Ringle <ml-ethereal[AT]ringle.org>
Tim Endean <endeant[AT]hotmail.com>
Charlie Lenahan <clenahan[AT]fortresstech.com>
Takeshi Nakashima <T.Nakashima[AT]jp.yokogawa.com>
Shoichi Sakane <sakane[AT]tanu.org>
Michael Richardson <Michael.Richardson[AT]protiviti.com>
Olivier Jacques <olivier.jacques[AT]hp.com>
Francisco Alcoba <francisco.alcoba[AT]ericsson.com>
Nils O. Selaasdal <noselasd[AT]asgaard.homelinux.org>
Guillaume Chazarain <guichaz[AT]yahoo.fr>
Angelo Bannack <angelo.bannack[AT]siemens.com>
Paolo Frigo <paolofrigo[AT]gmail.com>
Jeremy J Ouellette <jouellet[AT]scires.com>
Aboo Valappil <valappil_aboo[AT]emc.com>
Fred Hoekstra <fred.hoekstra[AT]philips.com>
Ankur Aggarwal <ankur[AT]in.athenasemi.com>
Lucian Piros <lpiros[AT]avmob.ro>
Juan Gonzalez <juan.gonzalez[AT]pikatech.com>
Brian Bogora <brian_bogora[AT]mitel.com>
Jim Young <sysjhy[AT]langate.gsu.edu>
Jeff Snyder <jeff[AT]mxtelecom.com>
William Fiveash <William.Fiveash[AT]sun.com>
Graeme Lunt <graeme.lunt[AT]smhs.co.uk>
Menno Andriesse <s5066[AT]nc3a.nato.int>
Stig Bjorlykke <stig[AT]bjorlykke.org>
Kyle J. Harms <kyle.j.harms[AT]boeing.com>
Eric Wedel <ewedel[AT]bluearc.com>
Secfire <secfire[AT]gmail.com>
Eric Hultin <Eric.Hultin[AT]arrisi.com>
Paolo Abeni <paolo.abeni[AT]email.it>
W. Borgert <debacle[AT]debian.org>
Frederic Roudaut <frederic.roudaut[AT]irisa.fr>
Christoph Scholz <scholz_ch[AT]web.de>
Wolfgang Hansmann <hansmann[AT]cs.uni-bonn.de>
Kees Cook <kees[AT]outflux.net>
Thomas Dreibholz <dreibh[AT]iem.uni-due.de>
Authesserre Samuel <sauthess[AT]gmail.com>
Balint Reczey <balint[AT]balintreczey.hu>
Stephen Fisher <stephenfisher[AT]centurylink.net>
Krzysztof Burghardt <krzysztof[AT]burghardt.pl>
Peter Racz <racz[AT]ifi.unizh.ch>
Jakob Bratkovic <j.bratkovic[AT]iskratel.si>
Mark Lewis <mlewis[AT]altera.com>
David Buechi <bhd[AT]zhwin.ch>
Bill Florac <bill.florac[AT]etcconnect.com>
Alex Burlyga <Alex.Burlyga[AT]netapp.com>
Douglas Pratley <Douglas.pratley[AT]detica.com>
Giorgio Tino <giorgio.tino[AT]cacetech.com>
Davide Schiera <davide.schiera[AT]riverbed.com>
Sebastien Tandel <sebastien[AT]tandel.be>
Clay Jones <clay.jones[AT]email.com>
Kriang Lerdsuwanakij <lerdsuwa[AT]users.sourceforge.net>
Abhik Sarkar <sarkar.abhik[AT]gmail.com>
Robin Seggelmann <seggelmann[AT]fh-muenster.de>
Chris Bontje <cbontje[AT]gmail.com>
Ryan Wamsley <wamslers[AT]sbcglobal.net>
Dave Butt <davidbutt[AT]mxtelecom.com>
Julian Cable <julian_cable[AT]yahoo.com>
Joost Yervante Damad <joost[AT]teluna.org>
Martin Sustrik <sustrik[AT]imatix.com>
Jon Smirl <jonsmirl[AT]gmail.com>
David Kennedy <sgsguy[AT]gmail.com>
Matthijs Mekking <matthijs[AT]mlnetlabs.nl>
Dustin Johnson <dustin[AT]dustinj.us>
Victor Fajardo <vfajardo[AT]tari.toshiba.com>
Tamas Regos <tamas.regos[AT]ericsson.com>
Moshe van der Sterre <moshevds[AT]gmail.com>
Rob Casey <rcasey[AT]gmail.com>
Ted Percival <ted[AT]midg3t.net>
Marc Petit-Huguenin <marc[AT]petit-huguenin.org>
Florent Drouin <florent.drouin[AT]alcatel-lucent.fr>
Karen Feng <kfeng[AT]fas.harvard.edu>
Stephen Croll <croll[AT]mobilemetrics.net>
Jens Braeuer <jensb[AT]cs.tu-berlin.de>
Sake Blok <sake[AT]euronet.nl>
Fulko Hew <fulko.hew[AT]gmail.com>
Yukiyo Akisada <Yukiyo.Akisada[AT]jp.yokogawa.com>
Andy Chu <chu.dev[AT]gmail.com>
Shane Kearns <shane.kearns[AT]symbian.com>
Loris Degioanni <loris.degioanni[AT]riverbed.com>
Sven Meier <msv[AT]zhwin.ch>
Holger Pfrommer <hpfrommer[AT]hilscher.com>
Hariharan Ananthakrishnan <hariharan.a[AT]gmail.com>
Hannes Kaelber <hannes.kaelber--wireshark[AT]x2e.de>
Stephen Donnelly <stephen[AT]endace.com>
Philip Frey <frey.philip[AT]gmail.com>
Yves Geissbuehler <yves.geissbuehler[AT]gmail.com>
Shigeo Nakamura <naka_shigeo[AT]yahoo.co.jp>
Sven Eckelmann <sven[AT]narfation.org>
Edward J. Paradise <pdice[AT]cisco.com>
Brian Stormont <nospam[AT]stormyprods.com>
Vincent Helfre <vincent.helfre[AT]ericsson.com>
Brooss <brooss.teambb[AT]gmail.com>
Joan Ramio <joan[AT]ramio.cat>
David Castleford <david.castleford[AT]orange-ftgroup.com>
Peter Harris <pharris[AT]opentext.com>
Martin Lutz <MartinL[AT]copadata.at>
Johnny Mitrevski <mitrevj[AT]hotmail.com>
Neil Horman <nhorman[AT]tuxdriver.com>
Andreas Schuler <krater[AT]badterrorist.com>
Matthias Wenzel <dect[AT]mazzoo.de>
Christian Durrer <christian.durrer[AT]sensemail.ch>
Naoyoshi Ueda <piyomaru3141[AT]gmail.com>
Javier Cardona <javier[AT]cozybit.com>
Jens Steinhauser <jens.steinhauser[AT]omicron.at>
Julien Kerihuel <j.kerihuel[AT]openchange.org>
Vincenzo Condoleo <vcondole[AT]hsr.ch>
Mohammad Ebrahim Mohammadi Panah <mebrahim[AT]gmail.com>
Greg Schwendimann <gregs[AT]iol.unh.edu>
Nick Lewis <nick.lewis[AT]atltelecom.com>
Fred Fierling <fff[AT]exegin.com>
Samu Varjonen <samu.varjonen[AT]hiit.fi>
Alexis La Goutte <alexis.lagoutte[AT]gmail.com>
Varun Notibala <nbvarun[AT]gmail.com>
Nathan Hartwell <nhartwell[AT]gmail.com>
Don Chirieleison <donc[AT]mitre.org>
Harald Welte <laforge[AT]gnumonks.org>
Chris Costa <chcosta75[AT]hotmail.com>
Bruno Premont <bonbons[AT]linux-vserver.org>
Florian Forster <octo[AT]verplant.org>
Ivan Sy Jr. <ivan_jr[AT]yahoo.com>
Matthieu Patou <mat[AT]matws.net>
Kovarththanan Rajaratnam <kovarththanan.rajaratnam[AT]gmail.com>
Matt Watchinski <mwatchinski[AT]sourcefire.com>
Ravi Kondamuru <Ravi.Kondamuru[AT]citrix.com>
Jan Gerbecks <jan.gerbecks[AT]stud.uni-due.de>
Vladimir Smrekar <vladimir.smrekar[AT]gmail.com>
Tobias Erichsen <t.erichsen[AT]gmx.de>
Erwin van Eijk <erwin.vaneijk[AT]gmail.com>
Venkateshwaran Dorai <venkateshwaran.d[AT]gmail.com>
Ben Greear <greearb[AT]candelatech.com>
Richard Kuemmel <r.kuemmel[AT]beckhoff.de>
Yi Yu <yiyu.inbox[AT]gmail.com>
Aniruddha A <aniruddha.a[AT]gmail.com>
David Aggeler <david_aggeler[AT]hispeed.ch>
Jens Kilian <jjk[AT]acm.org>
David Bond <mokon[AT]mokon.net>
Paul J. Metzger <pjm[AT]ll.mit.edu>
Robert Hogan <robert[AT]roberthogan.net>
Torrey Atcitty <torrey.atcitty[AT]harman.com>
Dave Olsen <dave.olsen[AT]harman.com>
Craig Gunther <craig.gunther[AT]harman.com>
Levi Pearson <levi.pearson[AT]harman.com>
Allan M. Madsen <allan.m[AT]madsen.dk>
Slava <slavak[AT]gmail.com>
H.sivank <hsivank[AT]gmail.com>
Edgar Gladkich <edgar.gladkich[AT]inacon.de>
Michael Bernhard <michael.bernhard[AT]bfh.ch>
Holger Hans Peter Freyther <zecke[AT]selfish.org>
Jose Pico <jose[AT]taddong.com>
David Perez <david[AT]taddong.com>
Haakon Nessjoen <haakon.nessjoen[AT]gmail.com>
Herbert Lischka <herbert[AT]lischka-berlin.de>
Felix Kraemer <sauter-cumulus[AT]de.sauter-bc.com>
Tom Hughes <tom[AT]compton.nu>
Owen Kirby <osk[AT]exegin.com>
Colin O'Flynn <coflynn[AT]newae.com>
Juha Siltanen <juha.siltanen[AT]nsn.com>
Cal Turney <cturney[AT]charter.net>
Lukasz Kotasa <lukasz.kotasa[AT]tieto.com>
Jason Masker <jason[AT]masker.net>
Giuliano Fabris <giuliano.fabris[AT]appeartv.com>
Alexander Koeppe <format_c[AT]online.de>
Holger Grandy <Holger.Grandy[AT]bmw-carit.de>
Hadriel Kaplan <hadrielk[AT]yahoo.com>
Srinivasa Pradeep <sippyemail-wireshark[AT]yahoo.com>
Lori Tribble <ljtconsulting[AT]gmail.com>
Thomas Boehne <TBoehne[AT]ADwin.de>
Gerhard Gappmeier <gerhard.gappmeier[AT]ascolab.com>
Hannes Mezger <hannes.mezger[AT]ascolab.com>
David Katz <dkatz[AT]airspan.com>
Toralf Foerster <toralf.foerster[AT]gmx.de>
Stephane Bryant <stephane[AT]glycon.org>
Emil Wojak <emil[AT]wojak.eu>
Steve Huston <shuston[AT]riverace.com>
Lorand Jakab <ljakab[AT]ac.upc.edu>
Grzegorz Szczytowski <Grzegorz.Szczytowski[AT]gmail.com>
Martin Kaiser <wireshark[AT]kaiser.cx>
Jakub Zawadzki <darkjames-ws[AT]darkjames.pl>
Roland Knall <roland.knall[AT]br-automation.com>
Xiao Xiangquan <xiaoxiangquan[AT]gmail.com>
Hans-Christoph Schemmel <hans-christoph.schemmel[AT]cinterion.com>
Tyson Key <tyson.key[AT]gmail.com>
Johannes Jochen <johannes.jochen[AT]belden.com>
Florian Fainelli <florian[AT]openwrt.org>
Daniel Willmann <daniel[AT]totalueberwachung.de>
Brian Cavagnolo <brian[AT]cozybit.com>
Allison <aobourn[AT]isilon.com>
Edwin Groothuis <wireshark[AT]mavetju.org>
Andrew Kampjes <andrew.kampjes[AT]endace.com>
Kurnia Hendrawan <kurnia.hendrawan[AT]consistec.de>
Leonard Tracy <letracy[AT]cisco.com>
Elliott Aldrich <elliott[AT]aldrichart.com>
Glenn Matthews <glenn.matthews[AT]cisco.com>
Donnie Savage <dsavage[AT]cisco.com>
Spenser Sheng <spenser.sheng[AT]ericsson.com>
Benjamin Stocks <bmstocks[AT]ra.rockwell.com>
Florian Reichert <refl[AT]zhaw.ch>
Martin Renold <reld[AT]zhaw.ch>
Iain Arnell <iarnell[AT]epo.org>
Mariusz Okroj <okrojmariusz[AT]gmail.com>
Ivan Lawrow <ivan.lawrow[AT]jennic.com>
Kari Vatjus-Anttila <kari.vatjus-anttila[AT]cie.fi>
Shobhank Sharma <ssharma5[AT]ncsu.edu>
Salil Kanitkar <sskanitk[AT]ncsu.edu>
Michael Sakaluk <mdsakalu[AT]ncsu.edu>
Mayuresh Raut <msraut[AT]ncsu.edu>
Sheetal Kshirsagar <sdkshirs[AT]ncsu.edu>
Andrew Williams <anwilli5[AT]ncsu.edu>
Per Liedberg <per.liedberg[AT]ericsson.com>
Gaurav Tungatkar <gauravstt[AT]gmail.com>
Bill Schiller <bill.schiller[AT]emerson.com>
Aditya Ambadkar <arambadk[AT]ncsu.edu>
Diana Chris <dvchris[AT]ncsu.edu>
Guy Martin <gmsoft[AT]tuxicoman.be>
Deepti Ragha <dlragha[AT]ncsu.edu>
Niels de Vos <ndevos[AT]redhat.com>
Clement Marrast <clement.marrast[AT]molex.com>
Jacob Nordgren <jnordgren[AT]gmail.com>
Rishie Sharma <rishie[AT]kth.se>
Richard Stearn <richard[AT]rns-stearn.demon.co.uk>
Tobias Rutz <tobias.rutz[AT]work-microwave.de>
MichaX XabXdzki <michal.labedzki[AT]wireshark.org>
MichaX Orynicz <michal.orynicz[AT]tieto.com>
Wido Kelling <kellingwido[AT]aol.com>
Kaushal Shah <kshah3[AT]ncsu.edu>
Subramanian Ramachandran <sramach6[AT]ncsu.edu>
Manuel Hofer <manuel[At]mnlhfr.at>
Gaurav Patwardhan <gspatwar[AT]ncsu.edu>
Peter Hatina <phatina[AT]redhat.com>
Tomasz MoX <desowin[AT]gmail.com>
Uli Heilmeier <uh[AT]heilmeier.eu>
Rupesh Patro <rbpatro[AT]ncsu.edu>
Vaibhav Katkade <katkade_v[AT]yahoo.com>
Allan W. Nielsen <anielsen[AT]vitesse.com>
Ishraq Ibne Ashraf <ishraq[AT]tinkerforge.com>
Robert Grange <robionekenobi[AT]bluewin.ch>
Zoltan Lajos Kis <zoltan.lajos.kis[AT]ericsson.com>
Juan Antonio Montesinos <juan.mondl[AT]gmail.com>
Anish Bhatt <anish[AT]chelsio.com>
Dmitry Bazhenov <dima_b[AT]pigeonpoint.com>
Masatake Yamato <yamato[AT]redhat.com>
John Miner <wiresharkdissectorcoder[AT]gmail.com>
XX X (Megumi Takeshita) <megumi[AT]ikeriri.ne.jp>
Remi Vichery <remi.vichery[AT]gmail.com>
Kevin Cox <kevincox[AT]kevincox.ca>
David Ameiss <dameiss[AT]29west.com>
Sean O. Stalley <sean.stalley[AT]intel.com>
Qiaoyin Yang <qiaoyin.yang[AT]gmail.com>
Thomas Wiens <th.wiens[AT]gmx.de>
Gilles Roudiere <gilles[AT]roudiere.net>
Alexander Gaertner <gaertner.alex[AT]gmx.de>
Raphaeel Doursenaud <rdoursenaud[AT]free.fr>
Ryan Doyle <ryan[AT]doylenet.net>
Jesse Gross <jesse[AT]nicira.com>
Joe Fowler <fowlerja[AT]us.ibm.com>
Enrico Jorns <ejo[AT]pengutronix.de>
Hitesh K Maisheri <maisheri.hitesh[AT]gmail.com>
Dario Lombardo <lomato[AT]gmail.com>
Pratik Yeole <pyeole[AT]ncsu.edu>
Guillaume Autran <gautran[AT]clearpath.ai>
Barbu Paul - Gheorghe <barbu.paul.gheorghe[AT]gmail.com>
Martin Kacer <kacer.martin[AT]gmail.com>
Ben Stewart <bst[AT]google.com>
Sumit Kumar Jha <sjha3[AT]ncsu.edu>
Kim Kempf <kim.kempf[AT]apcon.com>
S. Shapira <sswsdev[AT]gmail.com>
Lazar Sumar <bugzilla[AT]lazar.co.nz>
and by:
Georgi Guninski <guninski[AT]guninski.com>
Jason Copenhaver <jcopenha[AT]typedef.org>
Eric Perie <eric.perie[AT]colubris.com>
David Yon <yon[AT]tacticalsoftware.com>
Marcio Franco <franco.marcio[AT]rd.francetelecom.fr>
Kaloian Stoilov <kalkata[AT]yahoo.com>
Steven Lass <stevenlass[AT]mail.com>
Gregory Stark <gsstark[AT]mit.edu>
Darren Steele <steeley[AT]steeley.co.uk>
Michael Kopp <michael.kopp[AT]isarnet.de>
Bernd Leibing <bernd.leibing[AT]kiz.uni-ulm.de>
Chris Heath <chris[AT]heathens.co.nz>
Gisle Vanem <gvanem[AT]broadpark.no>
Ritchie <ritchie[AT]tipsybottle.com>
Aki Immonen <aki.immonen[AT]golftalma.fi>
David E. Weekly <david[AT]weekly.org>
Steve Ford <sford[AT]geeky-boy.com>
Masaki Chikama <masaki-c[AT]is.aist-nara.ac.jp>
Mohammad Hanif <mhanif[AT]nexthop.com>
Reinhard Speyerer <rspmn[AT]arcor.de>
Patrick Kursawe <phosphan[AT]gentoo.org>
Arsen Chaloyan <achaloyan[AT]yahoo.com>
Arnaud Jacques <webmaster[AT]securiteinfo.com>
D. Manzella <manzella[AT]lucent.com>
Jari Mustajarvi <jari.mustajarvi[AT]nokia.com>
Pierre Juhen <pierre.juhen[AT]wanadoo.fr>
David Richards <drichards[AT]alum.mit.edu>
Shusaku Ueda <ueda[AT]sra.co.jp>
Jonathan Perkins <jonathan.perkins[AT]ipaccess.com>
Holger Schurig <h.schurig[AT]mn-logistik.de>
Peter J. Creath <peter-ethereal[AT]creath.net>
Magnus Hansson <mah[AT]hms.se>
Pavel Kankovsky <kan[AT]dcit.cz>
Nick Black <dank[AT]reflexsecurity.com>
Bill Guyton <guyton[AT]bguyton.com>
Chernishov Yury <Chernishov[AT]iskrauraltel.ru>
Thomas Palmer <Thomas.Palmer[AT]Gunter.AF.mil>
Clinton Work <clinton[AT]scripty.com>
Joe Marcus Clarke <marcus[AT]marcuscom.com>
Kendy Kutzner <kutzner[AT]tm.uka.de>
James H. Cloos Jr. <cloos[AT]jhcloos.com>
Tim Farley <tfarley[AT]iss.net>
Daniel Thompson <daniel.thompson[AT]st.com>
Chris Jepeway <thai-dragon[AT]eleven29.com>
Matthew Bradley <matthew.bradley[AT]cnsonline.net>
Nathan Alger <nathan[AT]wasted.com>
Stas Grabois <sagig[AT]radware.com>
Ainsley Pereira <APereira[AT]Witness.com>
Philippe Mazeau <philippe.mazeau[AT]swissvoice.net>
Carles Kishimoto <ckishimo[AT]ac.upc.es>
Dennis Lim <postadal[AT]suse.cz>
Dennis Lim <Dennis.Lim[AT]motorola.com>
Martin van der Werff <martin[AT]vanderwerff.org>
Marco van den Bovenkamp <marco[AT]linuxgoeroe.dhs.org>
Ming Zhang <mingz[AT]ele.uri.edu>
Neil Piercy <Neil.Piercy[AT]ipaccess.com>
Remi Denis-Courmont <courmisch[AT]via.ecp.fr>
Thomas Palmer <tpalmer[AT]elmore.rr.com>
Maarten Svantesson <f95-msv[AT]f.kth.se>
Steve Sommars (e-mail address removed at contributor's request)
Kestutis Kupciunas <kesha[AT]soften.ktu.lt>
Rene Pilz <rene.pilz[AT]ftw.at>
Laurent Constantin <laurent.constantin[AT]aql.fr>
Martin Pichlmaier <martin.pichlmaier[AT]siemens.com>
Mark Phillips <msp[AT]nortelnetworks.com>
Nils Ohlmeier <lists[AT]ohlmeier.org>
Ignacio Goyret <igoyret[AT]lucent.com>
Bart Braem <bart.braem[AT]gmail.com>
Shingo Horisawa <name4n5[AT]hotmail.com>
Lane Hu <lane.hu[AT]utstar.com>
Marc Poulhies <marc.poulhies[AT]epfl.ch>
Tomasz Mrugalski <thomson[AT]klub.com.pl>
Brett Kuskie <mstrprgmmr[AT]chek.com>
Brian Caswell <bmc[AT]sourcefire.com>
Yann <yann_eads[AT]hotmail.com>
Julien Leproust <julien[AT]via.ecp.fr>
Mutsuya Irie <irie[AT]sakura-catv.ne.jp>
Yoshihiro Oyama <y.oyama[AT]netagent.co.jp>
Chris Eagle <cseagle[AT]nps.edu>
Dominique Bastien <dbastien[AT]accedian.com>
Nicolas Dichtel <nicolas.dichtel[AT]6wind.com>
Ricardo Muggli <ricardo.muggli[AT]mnsu.edu>
Vladimir Kondratiev <vladimir.kondratiev[AT]gmail.com>
Jaap Keuter <jaap.keuter[AT]xs4all.nl>
Frederic Peters <fpeters[AT]debian.org>
Anton Ivanov <anthony_johnson[AT]mail.ru>
Ilya Konstantinov <future[AT]shiny.co.il>
Neil Kettle <mu-b[AT]65535.com>
Steve Karg <skarg[AT]users.sourceforge.net>
Javier Acuna <javier.acuna[AT]sixbell.cl>
Miklos Szurdi <szurdimiklos[AT]yahoo.com>
Cvetan Ivanov <zezo[AT]spnet.net>
Vasanth Manickam <vasanth.manickam[AT]bt.com>
Julian Onions <julian.onions[AT]gmail.com>
Samuel Thibault <samuel.thibault[AT]ens-lyon.org>
Peter KovaX <peter.kovar[AT]gmail.com>
Paul Ollis <paul.ollis[AT]roke.co.uk>
Dominik Kuhlen <dkuhlen[AT]gmx.net>
Karl Knoebl <karl.knoebl[AT]siemens.com>
Maria-Luiza Crivat <luizacri[AT]gmail.com>
Brice Augustin <bricecotte[AT]gmail.com>
Matt Thornton <MATT_THORNTON[AT]appsig.com>
Timo Metsala <timo.metsala[AT]gmail.com>
Tomer Shani <thetour[AT]japan.com>
Manu Pathak <mapathak[AT]cisco.com>
John Sullivan <john[AT]kanargh.force9.co.uk>
Martin Andre <andre[AT]clarinet.u-strasbg.fr>
Andrei Emeltchenko <Andrei.Emeltchenko[AT]nokia.com>
Kirby Files <kfiles[AT]masergy.com>
Ravi Valmikam <rvalmikam[AT]airvananet.com>
Diego Petteno <flameeyes[AT]gentoo.org>
Daniel Black <dragonheart[AT]gentoo.org>
Christoph Werle <Christoph.Werle[AT]ira.uka.de>
Aaron Christensen <aaronmf[AT]gmail.com>
Ian Abel <ianabel[AT]mxtelecom.com>
Bryant Eastham <beastham[AT]slc.mew.com>
Taner Kurtulus <taner.kurtulus[AT]tubitak.gov.tr>
Joe Breher <linux[AT]q-music.com>
Patrick vd Lageweg <patrick[AT]bitwizard.nl>
Thomas Sillaber <Thomas.Sillaber[AT]gmx.de>
Mike Davies <m.davies[AT]btinternet.com>
Boris Misenov <Boris.Misenov[AT]oktelabs.ru>
Joe McEachern <joe[AT]qacafe.com>
Charles Lepple <clepple[AT]gmail.com>
Tuomas Maattanen <maattanen[AT]iki.fi>
Joe Eykholt <joe[AT]nuovasystems.com>
Ian Brumby <ian.brumby[AT]baesystems.com>
Todd J Martin <todd.martin[AT]acm.org>
Scott Robinson <scott.robinson[AT]flukenetworks.com>
Martin Peylo <wireshark[AT]izac.de>
Stephane Loeuillet <leroutier[AT]gmail.com>
Andrei Rubaniuk <rubaniuk[AT]mail.ru>
Mikael Magnusson <mikma264[AT]gmail.com>
Timo Teraes <timo.teras[AT]iki.fi>
Marton Nemeth <nm127[AT]freemail.hu>
Kai Blin <kai[AT]samba.org>
Olivier Montanuy <olivier.montanuy[AT]orange-ftgroup.com>
Thomas Morin <thomas.morin[AT]orange-ftgroup.com>
Jesus Roman <jroman[AT]teldat.com>
Giodi Giorgi <g.giorgi[AT]gmail.com>
Peter Hertting <Peter.Hertting[AT]gmx.net>
Jess Balint <jbalint[AT]gmail.com>
Bahaa Naamneh <b.naamneh[AT]gmail.com>
Magnus Soerman <magnus.sorman[AT]ericsson.com>
Pascal Quantin <pascal.quantin[AT]gmail.com>
Roy Marples <roy[AT]marples.name>
Ward van Wanrooij <ward[AT]ward.nu>
Federico Mena Quintero <federico[AT]novell.com>
Andreas Heise <andreas.heise[AT]nextiraone.de>
Alex Lindberg <alindber[AT]yahoo.com>
Rama Chitta <rama[AT]gear6.com>
Roberto Mariani <jelot-wireshark[AT]jelot.it>
Sandhya Gopinath <Sandhya.Gopinath[AT]citrix.com>
Raghav SN <Raghav.SN[AT]citrix.com>
Murali Raja <Murali.Raja[AT]citrix.com>
Devesh Prakash <Devesh.Prakash[AT]citrix.com>
Darryl Champagne <dchampagne[AT]sta.samsung.com>
Michael Speck <Michael.Speck[AT]avl.com>
Gerasimos Dimitriadis <dimeg[AT]intracom.gr>
Robert Simac <rsimac[AT]cronsult.com>
Johanna Sochos <johanna.sochos[AT]swissqual.com>
Felix Obenhuber <felix[AT]obenhuber.de>
Hilko Bengen <bengen--wireshark[AT]hilluzination.de>
Hadar Shoham <hadar.shoham[AT]gmail.com>
Robert Bullen <robert[AT]robertbullen.com>
Chuck Kristofek <chuck.kristofek[AT]ngc.com>
Markus Renz <Markus.Renz[AT]hirschmann.de>
Toshihiro Kataoka <kataoka.toshihiro[AT]gmail.com>
Petr Lautrbach <plautrba[AT]redhat.com>
Frank Lahm <franklahm[AT]googlemail.com>
Jon Ellch <jellch[AT]harris.com>
Alex Badea <vamposdecampos[AT]gmail.com>
Dirk Jagdmann <doj[AT]cubic.org>
RSA <ryazanov.s.a[AT]gmail.com>
Juliusz Chroboczek <jch[AT]pps.jussieu.fr>
Vladimir Kazansky <vovjo[AT]yandex.ru>
Peter Paluch <peter.paluch[AT]fri.uniza.sk>
Tom Brezinski <tombr[AT]netinst.com>
Nick Glass <nick.glass[AT]lycos.com>
Michael Mann <mmann78[AT]netscape.net>
Romain Fliedel <romain.fliedel+wireshark[AT]gmail.com>
Michael Chen <michaelc[AT]idssoftware.com>
Paul Stath <pstath[AT]axxcelera.com>
DeCount <aatrade[AT]libero.it>
Andras Veres-Szentkiralyi <vsza[AT]vsza.hu>
Jakob Hirsch <jh.wireshark-bugzilla[AT]plonk.de>
XXXXX XXXXXXXX <dpb[AT]corrigendum.ru>
XXXXX XXXXXXXX <billyjeans[AT]gmail.com>
Evan Huus <eapache[AT]gmail.com>
Tom Cook <tcook[AT]ixiacom.com>
Tom Alexander <talexander[AT]ixiacom.com>
Klaus Heckelmann <klaus.heckelmann[AT]nashtech.com>
Ben Bowen <bbowen[AT]godaddy.com>
Bodo Petermann <bp245[AT]hotmail.com>
Martin Kupec <martin.kupec[AT]kupson.cz>
Litao Gao <ltgao[AT]juniper.net>
Niels Widger <niels[AT]qacafe.com>
Pontus Fuchs <pontus.fuchs[AT]gmail.com>
Bill Parker <wp02855[AT]gmail.com>
Tomofumi Hayashi <s1061123[AT]gmail.com>
Tim Hentenaar <tim.hentenaar[AT]gmail.com>
Krishnamurthy Mayya <krishnamurthymayya[AT]gmail.com>
Nikitha Malgi <nikitha01[AT]gmail.com>
Adam Butcher <adam[AT]jessamine.co.uk>
Hendrik Uhlmann <Hendrik.Uhlmann[AT]rheinmetall.com>
Sebastiano Di Paola <sebastiano.dipaola[AT]gmail.com>
Steven J. Magnani <steve[AT]digidescorp.com>
David Arnold <davida[AT]pobox.com>
Alexander Chemeris <alexander.chemeris[AT]gmail.com>
Ivan Klyuchnikov <kluchnikovi[AT]gmail.com>
Max Baker <max[AT]warped.org>
Diederik de Groot <dkgroot[AT]talon.nl>
Hauke Mehrtens <hauke[AT]hauke-m.de>
0xBismarck <0xbismarck[AT]gmail.com>
Peter Van Eynde <pevaneyn[AT]cisco.com>
Marko Hrastovec <marko.hrastovec[AT]sloveniacontrol.si>
Mike Garratt <mg.wireshark[AT]evn.co.nz>
Fabio Tarabelloni <fabio.tarabelloni[AT]reloc.it>
Chas Williams <chas[AT]cmf.nrl.navy.mil>
Javier Godoy <uce[AT]rjgodoy.com.ar>
Matt Texier <matthieu[AT]texier.tv>
Linas Vepstas <linasvepstas[AT]gmail.com>
Simon Zhong <szhong[AT]juniper.net>
Bart Van Assche <bvanassche[AT]acm.org>
Peter Lemenkov <lemenkov[AT]gmail.com>
Karl Beldan <karl.beldan[AT]gmail.com>
Jiri Engelthaler <engycz[AT]gmail.com>
Stephen Ludin <sludin[AT]ludin.org>
Andreas Urke <andurke[AT]gmail.com>
Patrik Lundquist <patrik.lundquist[AT]gmail.com>
Mark Vitale <mvitale[AT]sinenomine.net>
Peter Wu <peter[AT]lekensteyn.nl>
Jerry Negele <jerry.negele[AT]arrisi.com>
Hannes Hofer <hhofer[AT]barracuda.com>
Luca Coelho <luca[AT]coelho.fi>
Masayuki Takemura <masayuki.takemura[AT]gmail.com>
Ed Beroset <beroset[AT]mindspring.com>
e.yimjia <jy.m12.0[AT]gmail.com>
Jonathon Jongsma <jjongsma[AT]redhat.com>
Zeljko Ancimer <zancimer[AT]gmail.com>
Deon van der Westhuysen <deonvdw[AT]gmail.com>
Ibrahim Can Yuce <canyuce[AT]gmail.com>
Robert Jongbloed <robertj[AT]voxlucida.com.au>
Pavel Moravec <pmoravec[AT]redhat.com>
Robert Long <rlong[AT]sandia.gov>
James Lynch <lynch007[AT]gmail.com>
Chidambaram Arunachalam <carunach[AT]cisco.com>
Joa~o Valverde <joao.valverde[AT]tecnico.ulisboa.pt>
Benoit Canet <benoit[AT]scylladb.com>
Haakon Oye Amundsen <haakon.amundsen[AT]nordicsemi.no>
From git log
---------------
Adam Goldman <adam.goldman[AT]intel.com>
Adam Mitz <mitza[AT]ociweb.com>
Adam Pridgen <adam.pridgen[AT]thecoverofnight.com>
Adam Schwalm <adam.schwalm[AT]dynetics.com>
Adam Wujek <adam.wujek[AT]cern.ch>
Aditya Jain <aditya.jain[AT]samsung.com>
Adrian Granados <adrian[AT]adriangranados.com>
Adrian Simionov <daniel.simionov[AT]gmail.com>
Adrian-Ken Rueegsegger <ken[AT]codelabs.ch>
Adrien Aubry <adraub[AT]gmail.com>
Ahmad Fatoum <ahmad[AT]a3f.at>
Ajay Panicker <apanicke[AT]google.com>
Alan Partis <alpartis[AT]thundernet.com>
Alex Badea <abadea[AT]ixiacom.com>
Alex Tessmer <dev[AT]tessmer.me>
AlexL <loginov.alex.valer[AT]gmail.com>
Alexander Gryanko <xpahos[AT]gmail.com>
Alexander Gaertner <sphinxs1988[AT]googlemail.com>
Alexander Nogikh <wp32pw[AT]gmail.com>
Alexander Stein <alexanders83[AT]web.de>
Alexander Wetzel <alexander.wetzel[AT]web.de>
Alexandr Savca <s.alex08[AT]mail.ru>
Alistair Leslie-Hughes <leslie_alistair[AT]hotmail.com>
Allan Moller Madsen <almomadk[AT]gmail.com>
Ambarish Malpani <ambarish[AT]defend7.com>
Amine Kherbouche <amine.kherbouche[AT]6wind.com>
Amitoj Setia <asetia[AT]juniper.net>
Andre Puschmann <andre[AT]softwareradiosystems.com>
Andreas Gruenbacher <andreas.gruenbacher[AT]gmail.com>
Andreas Leibold <andreas.leibold[AT]harman.com>
Andreas Schultz <andreas.schultz[AT]travelping.com>
Andreas Stieger <andreas.stieger[AT]gmx.de>
Andreas Urke <arurke[AT]netwurke.com>
Andrei Cipu <acipu[AT]ixiacom.com>
Andrew Chernyh <andrew.chernyh[AT]gmail.com>
Andrew Hoag <Andrew.Hoag[AT]aireon.com>
Andy Ling <Andy.Ling[AT]quantel.com>
Andy Ling <andy.ling[AT]s-a-m.com>
Anil Kumar <anilkumar911[AT]gmail.com>
Anndy Ke <anndymaktub[AT]yahoo.com.tw>
Anthony Coddington <anthony.coddington[AT]endace.com>
Anton Butenko <ant.butenko[AT]gmail.com>
Anton Glukhov <anton.a.glukhov[AT]gmail.com>
Anton Kharchenko <astotal[AT]gmail.com>
Anton Thomasson <anton.thomasson[AT]ericsson.com>
Apeksha Singhal <apeksha.singhal[AT]gmail.com>
Arjen Zonneveld <arjen[AT]bz2.nl>
Arnd Hannemann <arnd[AT]arndnet.de>
Artur Nowosielski <artnowo[AT]gmail.com>
Ashish Shukla <shukla.a[AT]gmail.com>
Aurelien Aptel <aaptel[AT]suse.com>
Babak Farrokhi <babak[AT]farrokhi.net>
Bartolo Otrit <bartolootrit[AT]gmail.com>
Baruch Siach <baruch[AT]tkos.co.il>
Basil <addremover[AT]gmail.com>
Bastien Bailly <babassbailly[AT]free.fr>
Ben Burwell <bburwell[AT]lutron.com>
Ben Fox-Moore <ben.foxmoore[AT]accelleran.com>
Benjamin Coddington <bcodding[AT]redhat.com>
Benjamin Hesmans <benjamin.hesmans[AT]uclouvain.be>
Benjamin Parzella <bparzella[AT]gmail.com>
Benjamin Roch <benjamin.roch[AT]tttech.com>
Benoit Grange <benoit.grange[AT]gmail.com>
Bertrand Bonnefoy-Claudet <bertrandbc[AT]gmail.com>
Binh Trinh <beango[AT]gmail.com>
Birol Capa <birol.capa[AT]siemens.com>
Bjoern Ruytenberg <bjorn[AT]bjornweb.nl>
Boris Bochkarev <Boris-Bochkaryov[AT]yandex.ru>
Bradford Boyle <bradford.d.boyle[AT]gmail.com>
Brandon Enochs <enochs.brandon[AT]gmail.com>
Branislav Makan <branislav.makan1994[AT]gmail.com>
Brenton Rothchild <brentonr[AT]dorm.org>
Brian Whitney <brian.m.whitney[AT]outlook.com>
Britt McKinley <bmckinley[AT]sonusnet.com>
Bruno Verstuyft <bruno.verstuyft[AT]excentis.com>
Camille Guerin <guerincamille56[AT]gmail.com>
Carlos Velasco <carlos.velasco[AT]nimastelecom.com>
Cathy Yang <cathy.y.yang[AT]ericsson.com>
Cedric Izoard <cedric.izoard[AT]ceva-dsp.com>
Cenk GuendoXan <cnkgndgn[AT]gmail.com>
Chaitanya T K <chaitanya.mgit[AT]gmail.com>
Charles Nepveu <charles.nepveu[AT]verint.com>
Charlie Lenahan <clenahan[AT]sonicbison.com>
Chema Gonzalez <chemag[AT]gmail.com>
Chris Brandson <chris.brandson[AT]gmail.com>
Chris Dunlop <chris.dunlop3[AT]gmail.com>
Chris Wills <xenkrs[AT]outlook.com>
Christian Ambach <ambi[AT]samba.org>
Christian Lamparter <chunkeey[AT]googlemail.com>
Christian M. Amsuess <chrysn[AT]fsfe.org>
Christian Tellefsen <chris-git[AT]tellefsen.net>
Christian Ullrich <chris[AT]chrullrich.net>
Christoph Burger-Scheidlin <mail[AT]christoph.burger-scheidlin.name>
Christoph Jaehnigen <nuabaranda[AT]web.de>
Christoph Schlosser <christoph[AT]schlosser.xyz>
Christoph Wurm <wurm[AT]elastic.co>
Christophe GUERBER <christophe.guerber[AT]gmail.com>
Christopher Kilgour <techie[AT]whiterocker.com>
Chuan He <bupthc[AT]gmail.com>
Chuck Lever <chuck.lever[AT]oracle.com>
Chugzilla <chugzilla77[AT]gmail.com>
Chun-Yeow Yeoh <yeohchunyeow[AT]gmail.com>
Claudius Zingerli <czingerl[AT]gmail.com>
Cody Doucette <doucette[AT]bu.edu>
Craig Jackson <cejackson51[AT]gmail.com>
Cedric Delmas <cedricde[AT]outlook.fr>
D. Ulis <daulis0[AT]gmail.com>
D. W. Poon <dwpoon[AT]mail.ubc.ca>
Daan De Meyer <daan.j.demeyer[AT]gmail.com>
Dan Robertson <danlrobertson89[AT]gmail.com>
Dana Sy <dana.hayden.sy[AT]gmail.com>
Daniel Mack <daniel[AT]zonque.org>
Daniel McLean <maczor[AT]gmail.com>
Daniel Stenberg <daniel[AT]haxx.se>
Daniel Tan <BACdaBASpert[AT]optigo.net>
Daniel Willmann <dwillmann[AT]sysmocom.de>
Daniele Lacamera <daniele.lacamera[AT]technicolor.com>
Danieel van Eeden <wireshark[AT]myname.nl>
Darien Spencer <cusneud[AT]mail.com>
Darius Davis <darius[AT]vmware.com>
Darshan Nevgi <darshan.sn[AT]samsung.com>
Dave Goodell <dave[AT]goodell.io>
Dave Pifke <dave[AT]pifke.org>
Dave Rigby <daver[AT]couchbase.com>
Dave Tapuska <dtapuska[AT]google.com>
David Aggeler <david_aggeler[AT]yahoo.com>
David Ameiss <david[AT]ameissnet.com>
David Arnold <d[AT]0x1.org>
David Barrera <davidbb[AT]gmail.com>
David Creswick <dcrewi[AT]gyrae.net>
David McKay <mckay.david[AT]gmail.com>
David Morsberger <dave[AT]morsberger.com>
David Snowdon <daves[AT]metamako.com>
David Tapuska <dave[AT]tapuska.com>
David Zoller <zollerd[AT]gmail.com>
Davide Caratti <davide.caratti[AT]gmail.com>
Deep Datta <ddatta[AT]ixiacom.com>
Denis Janssen <janssend[AT]gmail.com>
Derick Rethans <github[AT]derickrethans.nl>
Devin Heitmueller <dheitmueller[AT]kernellabs.com>
Dhananjay Patki <dhpatki[AT]cisco.com>
Dhiru Kholia <kholia[AT]kth.se>
DiablosOffens <DiablosOffens[AT]gmx.de>
Didier Arenzana <darenzana[AT]yahoo.fr>
Diederik de Groot <ddegroot[AT]talon.nl>
Dirk Roemmen <dirk.roemmen[AT]cslab.de>
Dirk Weise <code[AT]dirk-weise.de>
Dmitry Bravikov <dmitry[AT]bravikov.pro>
Dmitry Lazurkin <dilaz03[AT]gmail.com>
Dom Gifford <Dominic.Gifford[AT]atmel.com>
Dominic Chen <d.c.ddcc[AT]gmail.com>
Doug Brown <doug[AT]downtowndougbrown.com>
Dr. Lars Voelker <lars.voelker[AT]bmw.de>
Ebben Aries <exa[AT]fb.com>
Ed Beroset <beroset[AT]ieee.org>
Edward Dao <edmailbox[AT]gmail.com>
Edward Smith <edward.smith[AT]nowlegent.com>
Edwin Groothuis <edwin[AT]mavetju.org>
Eldon Stegall <wireshark-gerrit[AT]eldondev.com>
Eliot Lear <lear[AT]cisco.com>
Emery Hemingway <emery[AT]vfemail.net>
Eric Anderson <andersoe[AT]cs.cmu.edu>
Eric Wang <terminal_0[AT]aol.com>
Eric Wetzel <thewetzel[AT]gmail.com>
Erik de Jong <erikdejong[AT]gmail.com>
Erika Szelleova <szelleerika[AT]gmail.com>
Ethan Young <imfargo[AT]gmail.com>
Etienne Dechamps <etienne[AT]edechamps.fr>
Etienne Millon <etienne[AT]cryptosense.com>
Eugene Adell <eugene.adell[AT]d2-si.eu>
Eugene Exarevsky <eugene.exarevsky[AT]dsr-company.com>
Eugene Sukhodolin <eugene[AT]sukhodolin.com>
Evelio Vila <eveliovila[AT]gmail.com>
Fabian Raetz <fabian.raetz[AT]gmail.com>
Fabrizio Demaria <fabrizio.demaria[AT]intel.com>
Felix Ruess <felix.ruess[AT]roboception.de>
Filip Sohajek <filip.sohajek[AT]gmail.com>
Flavio Santes <flavio.santes[AT]1byt3.com>
Florian Adamsky <fa-git[AT]haktar.org>
Florian Bezold <florian.bezold[AT]esrlabs.com>
Florian Lohoff <f[AT]zz.de>
Francisco Javier Sanchez-Roselly <franciscojavier.sanchezroselly[AT]ujaen.es>
Francois Schneider <francois.schneider[AT]airbus.com>
Francois-Xavier Le Bail <fx.lebail[AT]yahoo.com>
Frank Carpenter <frank.carpenter[AT]spectralink.com>
Franklin Mathieu <franklinmathieu[AT]gmail.com>
Gabor Vaszkun <vaszkun[AT]gmail.com>
Gabriel Ganne <gabriel.ganne[AT]enea.com>
Ganesh Nawsupe <ganesh991[AT]gmail.com>
Garming Sam <garming[AT]catalyst.net.nz>
Gene Cumm <gene.cumm[AT]gmail.com>
Gerald Combs <gerald.combs[AT]riverbed.com>
Gerard Garcia <ggarcia[AT]deic.uab.cat>
Gergely Nagy <ngg[AT]ngg.hu>
Gerhard KHUENY <Gerhard.KHUENY[AT]bachmann.info>
Gianluca Borello <g.borello[AT]gmail.com>
Gizem Yurdagul <gizemnuryurdagul[AT]gmail.com>
Gloria Pozuelo <gloria.pozuelo[AT]bics.com>
Gordon Ross <gordon.w.ross[AT]gmail.com>
Graham Shanks <graham.shanks[AT]blueyonder.co.uk>
Gregor Beck <gbeck[AT]sernet.de>
Gregor Jasny <gjasny[AT]googlemail.com>
Gregor Miernik <gregor.miernik[AT]hytec.de>
Guillaume Autran <gautran[AT]clearpathrobotics.com>
Guy Davies <aguydavies[AT]gmail.com>
Guenther Deschner <gd[AT]samba.org>
Hal Rosenstock <hal.rosenstock[AT]gmail.com>
Hanspeter Portner <dev[AT]open-music-kontrollers.ch>
Hassan Sultan <sultah[AT]amazon.com>
Hauke Mehrtens <hauke.mehrtens[AT]intel.com>
Helmut Buchsbaum <helmut.buchsbaum[AT]gmail.com>
Herwin Weststrate <herwin[AT]quarantainenet.nl>
Hessam Jalali <hessam.jalali[AT]gmail.com>
Hiroaki KAWAI <hiroaki.kawai[AT]gmail.com>
Hiroshi Ioka <hirochachacha[AT]gmail.com>
Holger Hans Peter Freyther <holger[AT]moiji-mobile.com>
Huang Qiangxiong <qiangxiong.huang[AT]qq.com>
IWASE Yusuke <iwase.yusuke0[AT]gmail.com>
Ignacio Martinez <ignacio.martinez.rivera[AT]gmail.com>
Ike Gilbert <ike[AT]imgilbert.com>
Ilya Gavrilov <ilya.dev[AT]gmail.com>
Ionut Ceausu <ionut.ceausu[AT]gmail.com>
Isaac Boukris <iboukris[AT]gmail.com>
Ivan Ermakov <iermakov[AT]yahoo.com>
Ivan Nardi <nardi.ivan[AT]gmail.com>
Ivan Secerin <ivan.severin.m[AT]gmail.com>
J. Bruce Fields <bfields[AT]redhat.com>
JC Wren <jcwren[AT]jcwren.com>
Jaap Keuter <jkeuter[AT]aimvalley.nl>
Jaime Caaman~o Ruiz <jaime.caamano.ruiz[AT]ericsson.com>
Jakub Pawlowski <jpawlowski[AT]google.com>
James Coleman <jamesc[AT]dspsrv.com>
James Ko <jck[AT]exegin.com>
Jamil Nimeh <jnimeh[AT]gmail.com>
Jan Holthuis <jan.holthuis[AT]ruhr-uni-bochum.de>
Jan Kaisrlik <j.kaisrlik[AT]seznam.cz>
Jan Seda <hodor[AT]hodor.cz>
Jan Spevak <jan.spevak[AT]nokia.com>
Jan-Hendrik Bolte <jabolte[AT]uos.de>
Jason Cohen <kryojenik2[AT]gmail.com>
Jason Heimann <jheimann[AT]pertino.com>
Jason Uher <jason.uher[AT]jhuapl.edu>
Jean Thomas <jeanthomas[AT]sierrawireless.com>
Jeff Dyer <jmasterfunk[AT]gmail.com>
Jeff Layton <jlayton[AT]redhat.com>
Jeff Widman <jeff[AT]jeffwidman.com>
Jeffrey Smith <whydoubt[AT]gmail.com>
Jens Kilian <jens.kilian[AT]advantest.com>
Jeremy Hitt <jeremy.hitt[AT]isilon.com>
Jeroen Roovers <jer[AT]gentoo.org>
Jeroen Sack <jeroen[AT]jeroensack.nl>
Jesse Gross <jesse[AT]kernel.org>
Jim Schaettle <jimschaettle[AT]gmail.com>
Jim Walker <jim[AT]couchbase.com>
Jim Young <jyoung[AT]gsu.edu>
Jo Rueschel <wireshark[AT]rueschel.de>
Joakim Karlsson <oakimk[AT]gmail.com>
Johan Wahl <johan.wahl[AT]ericsson.com>
John A. Thacker <johnthacker[AT]gmail.com>
John Keeping <john[AT]metanate.com>
John Miner <optommp[AT]gmail.com>
John Viklund <john.viklund[AT]effnet.com>
Jon DeVree <nuxi[AT]vault24.org>
Jonas Falkevik <jonas.falkevik[AT]gmail.com>
Jonathan Brucker <jonathan.brucke[AT]gmail.com>
Jonathan Mun~oz <jonathan.munoz[AT]inria.fr>
Jordan Keister <grokspawn[AT]gmail.com>
Jorge Mora <jmora1300[AT]gmail.com>
Jorge Power <jpower[AT]rsscorp.org>
Jose Rubio <joserubiovidales[AT]gmail.com>
Josef Baumgartner <josef.baumgartner[AT]br-automation.com>
Joseph Huffman <jhuffman[AT]codeaurora.org>
Josip Medved <jmedved[AT]jmedved.com>
Juan Jose Martin Carrascosa <juanjo[AT]rti.com>
Juan Matias <jmrepetti[AT]gmail.com>
Juan Pablo Mendoza <jpablo[AT]gmail.com>
Julian Cable <julian.cable[AT]yahoo.com>
Julian Renz <julian[AT]renz.cloud>
Julien STAUB <atsju2[AT]yahoo.fr>
Jun Wang <sdn_app[AT]163.com>
Junpei Yoshino <junpei.yoshino[AT]gmail.com>
Justin Dailey <justin[AT]mti-systems.com>
Justin Helgesen <justinhelgesen[AT]gmail.com>
Justin J. Novack <jnovack[AT]gmail.com>
JustinKu <jiunrong[AT]gmail.com>
Jerome LAFORGE <jerome.laforge[AT]gmail.com>
Kary Rogers <kary.rogers[AT]gmail.com>
Kasper Deng <kasper.deng[AT]ericsson.com>
Kenneth Soerensen <knnthsrnsn[AT]gmail.com>
Kenny Root <kenny[AT]the-b.org>
Kevin Bracey <kevin.bracey[AT]arm.com>
Kevin Cernekee <cernekee[AT]chromium.org>
Kevin Grigorenko <kevin.grigorenko[AT]us.ibm.com>
Kevin Hogan <kwabena[AT]google.com>
Kim Baeckstroem <kim.backstrom[AT]gmail.com>
Lars Christensen <larsch[AT]belunktum.dk>
Lars Sundstroem <lars.x.sundstrom[AT]ericsson.com>
Lasse Luttermann Poulsen <lasse.luttermann[AT]gmail.com>
Laszlo Papp <laszlo.papp[AT]hubersuhner.com>
Laurenz Kamp <laurenz.kamp[AT]gmx.de>
Lee Mitchell <lee[AT]indigopepper.com>
Lev Stipakov <lstipakov[AT]gmail.com>
Lorenzo Vannucci <vannucci[AT]ntop.org>
Lotte Steenbrink <lotte[AT]zombietetris.de>
Luca Melette <luca[AT]srlabs.de>
Lucas Simopoulos <lsimopoulos[AT]gmail.com>
Lukas Emersberger <lukas.emersberger[AT]gmail.com>
Luke Chou <luke.chou[AT]gmail.com>
Luke Mewburn <luke[AT]mewburn.net>
Lutz Kresge <LutzKr[AT]protonmail.ch>
Leo Gaspard <leo[AT]gaspard.io>
Maarten Bezemer <maarten.bezemer[AT]gmail.com>
Magnus Henoch <magnus.henoch[AT]gmail.com>
Maka0 <Maka0[AT]yurei.net>
Makoto Shimamura <makoto.shimamura[AT]toshiba.co.jp>
Malcolm Walters <malcolm.walters[AT]acano.com>
MaliXa VuXiniX <malishav[AT]gmail.com>
Marc Bevand <mbevand[AT]google.com>
Marc Fournier <marc.fournier[AT]camptocamp.com>
Marcel Essig <marcel.essig[AT]gmx.de>
Marcelo Ricardo Leitner <marcelo.leitner[AT]gmail.com>
Marcin Rokicki <marcin.rokicki[AT]gmail.com>
Marian XurkoviX <md[AT]bts.sk>
Marie Janssen <jamuraa[AT]google.com>
Marius Paliga <marius.paliga[AT]gmail.com>
Mark Ciechanowski <markciechanowski[AT]gmail.com>
Mark Cunningham <launchpad[AT]markcunningham.ie>
Mark Phillips <mark.s.phillips[AT]outlook.com>
Mark Weel <markweel[AT]hotmail.com>
Marko Hrastovec <marko.hrastovec[AT]gmail.com>
Marouen Ghodhbane <marouen.ghodhbane[AT]nxp.com>
Martin Boye Petersen <martinboyepetersen[AT]gmail.com>
Martin Heusse <martin.heusse[AT]imag.fr>
Martin Sehnoutka <msehnout[AT]redhat.com>
Martin Tibensky <martin.tibensky[AT]alcatel-lucent.com>
Martin Vit <martin[AT]voipmonitor.org>
Masashi Honma <masashi.honma[AT]gmail.com>
Matej KoXik <5764c029b688c1c0d24a2e97cd764f[AT]gmail.com>
Matej Tkac <matej.tkac.mt[AT]gmail.com>
Mathias Kurth <mathias.kurth[AT]commsolid.com>
Matt Lawrence <bugzilla.wireshark[AT]erisa.co.uk>
Matthieu Coudron <matthieu.coudron[AT]lip6.fr>
Max Dmitrichenko <dmitrmax[AT]gmail.com>
Merlin Chlosta <merlin.chlosta+gnuradio[AT]ruhr-uni-bochum.de>
Micha Reiser <michafamreiser.ch>
Michael Adam <obnox[AT]samba.org>
Michael Cistera <michael.cistera[AT]netscout.com>
Michael McConville <mmcco[AT]mykolab.com>
Michael Oed <michael.oed[AT]gmail.com>
Michael Pergament <mpergament[AT]googlemail.com>
Michael Sweet <michael.r.sweet[AT]gmail.com>
Michael Vigovsky <upliner[AT]gmail.com>
Michail Koreshkov <drkor[AT]bk.ru>
Michal Kubecek <mkubecek[AT]suse.cz>
Michal Pazdera <michal.pazdera[AT]gmail.com>
Michal Privoznik <mprivozn[AT]redhat.com>
Michal Slavka <slavka.michal[AT]gmail.com>
Michalis Kapsalakis <kapsalis1989[AT]gmail.com>
MichaX Skalski <mskalski13[AT]gmail.com>
Michele Baldessari <michele[AT]acksyn.org>
Mikael Kanstrup <mikael.kanstrup[AT]gmail.com>
Mikael Kanstrup <mikael.kanstrup[AT]sony.com>
Mike Frysinger <vapier[AT]chromium.org>
Mike Gerschefske <msgersch2[AT]gmail.com>
Mike Lugo <mlugo.apx[AT]gmail.com>
Mike Morrin <morrinmike[AT]gmail.com>
Mikhail Koreshkov <drkor[AT]hotbox.ru>
Miltos Patsiouras <mipatsio[AT]gmail.com>
Mirko Parthey <mirko.parthey[AT]web.de>
Moraney Jalil <moraney.jalil[AT]outlook.com>
Moshe Kaplan <me[AT]moshekaplan.com>
Nathan Cole <nath[AT]thecoleresidence.co.uk>
Nathaniel Clark <nathaniel.l.clark[AT]intel.com>
Neil Ostroff <neil[AT]mangosoup.com>
Nick Bedbury <npbedbur[AT]syr.edu>
Nick Carter <ncarter100[AT]gmail.com>
Nick James <mookito[AT]tuta.io>
Nick Lowe <nick.lowe[AT]gmail.com>
Nicolas BERTIN <nicolas.bertin[AT]al-enterprise.com>
Nicolas Cavallari <nicolas.cavallari[AT]green-communications.fr>
Nicolas Darchis <ndarchis[AT]cisco.com>
Nicolas S. Dade <nic.dade[AT]gmail.com>
Nikhil AP <nikhilap[AT]arista.com>
Nikolai Ipatyev <wallprime[AT]yandex.com>
Nils Ohlmeier <github[AT]ohlmeier.org>
Nitzan Carmi <nitzanc[AT]mellanox.com>
Noel Power <noel.power[AT]suse.com>
Nora Sandler <nsandler[AT]securityinnovation.com>
Olaf Bergmann <bergmann[AT]tzi.org>
Olga Kornievskaia <kolga[AT]netapp.com>
Oliver Downard <oliver.downard[AT]couchbase.com>
Olivier Verriest <verri[AT]x25.pm>
Oren Koler <clicker78[AT]gmail.com>
Orgad Shaneh <orgads[AT]gmail.com>
Oscar Gonzalez de Dios <oscar.gonzalezdedios[AT]telefonica.com>
Osman Sakalla <osman.sakalla[AT]ericsson.com>
Owen Williams <williams.owen[AT]gmail.com>
PHO <pho[AT]cielonegro.org>
Parav Pandit <paravpandit[AT]yahoo.com>
Pascal Artho <pascalartho[AT]gmail.com>
Pascal S. de Kloe <pascal[AT]quies.net>
Patrice Fournier <patrice.fournier[AT]ifax.com>
Patrick MacArthur <pmacarth[AT]iol.unh.edu>
Patrick Servello <patrick.servello[AT]gmail.com>
Patryk Nowak <patryk.nowak[AT]tieto.com>
Pau Espin Pedrol <pespin[AT]sysmocom.de>
Paul Emge <paul.emge[AT]digidescorp.com>
Paul Offord <paul.offord[AT]advance7.com>
Paul Thomas <pthomas8589[AT]gmail.com>
Paul Williamson <paul[AT]mustbeart.com>
Paul Zander <p.j.zander[AT]lighting.com>
Paulo Roberto Branda~o <betobrandao[AT]gmail.com>
Pavel Karneliuk <pavel_karneliuk[AT]epam.com>
Pavel Moravec <mgr.pavel[AT]gmail.com>
Pavel Odintsov <pavel.odintsov[AT]gmail.com>
Pavel Strnad <strnadp[AT]tiscali.cz>
Pavlos Antoniou <pant[AT]intracom-telecom.com>
Pedro Jose Marron <pjmarron[AT]locoslab.com>
Peng Li <seudut[AT]gmail.com>
Peng Tao <tao.peng[AT]primarydata.com>
Peter Hamilton <qmear55[AT]protonmail.com>
Peter Membrey <peter[AT]membrey.hk>
Peter Ross <peter.ross[AT]dsto.defence.gov.au>
Petr Gotthard <petr.gotthard[AT]honeywell.com>
Petr Sumbera <petr.sumbera[AT]oracle.com>
Petr Xtetiar <petr.stetiar[AT]gaben.cz>
Phil Beeson <bugzilla[AT]philbeeson.com>
Philip Rosenberg-Watt <p.rosenberg-watt[AT]cablelabs.com>
Philipp Hancke <fippo[AT]andyet.net>
Pino Toscano <pino[AT]debian.org>
Piotr PawXowski <ppiotru[AT]gmail.com>
Piotr Tulpan <piotr.tulpan[AT]netscan.pl>
Prashanth Pai <ppai[AT]redhat.com>
Priyanka Mondal <priyanka02010[AT]gmail.com>
Radhashyam Behera <radhashyambehera[AT]gmail.com>
Rado Radoulov <rad0x6f[AT]gmail.com>
Ray Gomez <rayvincent.gomez[AT]gmail.com>
Remi Gacogne <remi.gacogne[AT]powerdns.com>
Ricardo Cristian Ramirez <r.cristian.ramirez[AT]gmail.com>
Rich Coe <richcoe2[AT]gmail.com>
Richard Kuemmel <kuemmel.ric[AT]googlemail.com>
Rishi Dev Singh <rishi.dev[AT]samsung.com>
Robert Beardsworth <rob_beardsworth[AT]hotmail.com>
Robert Cragie <robert.cragie[AT]gmail.com>
Robert P <tehownt[AT]gmail.com>
Robert Sauter <sauter[AT]locoslab.com>
Roland Haenel <roland[AT]haenel.me>
Roland Knall <rknall[AT]gmail.com>
Roman Leonhartsberger <ro.leonhartsberger[AT]gmail.com>
Roman Volkov <volkoff_roman[AT]ukr.net>
Ronen Boazi <ronen.boazi[AT]intel.com>
Rudra Rugge <rrugge[AT]juniper.net>
Rui ZHANG <rzhang[AT]grandstream.cn>
Russel Howe <russel[AT]appliedinvention.com>
Russell Lowes <russelll[AT]metamako.com>
Rustam Safargalin <rustam.safargalin[AT]sifox.ru>
Ryan Mullen <rmmullen[AT]gmail.com>
Remy Leone <remy.leone[AT]gmail.com>
Sam Cisneros <Sam.Cisneros15[AT]protonmail.com>
Samiran Saha <ssahasamiran[AT]gmail.com>
Sandeep Dahiya <sdahiya[AT]gmail.com>
Sander Steffann <sander[AT]steffann.nl>
Sanket Godbole <sanket.godbole[AT]spirent.com>
Scott Deandrea <sdeandrea[AT]apple.com>
Sebastian Kloeppel <sk[AT]nakedape.net>
Sebastian Schildt <sebastian[AT]frozenlight.de>
Selva Kumar <v.selvamuthukumar[AT]gmail.com>
Selvamegala <sselvamegala[AT]gmail.com>
Sergey Avseyev <sergey.avseyev[AT]gmail.com>
Sergio Moreno Mozota <sergio.morenomozota[AT]telefonica.com>
Seth Alexander <seth.alexander[AT]cosmicaes.com>
Sharvil Nanavati <sharvil[AT]playground.global>
Shekhar Chandra <ranushekhar[AT]gmail.com>
Shinjo Park <peremen[AT]gmail.com>
Shoichi Sakane <wireshark-shoichi[AT]tanu.org>
Shu Shen <shu.shen[AT]gmail.com>
Shuai Xiao <iamhihi[AT]gmail.com>
Silvio Gissi <silvio.gissi[AT]gmail.com>
Simon Barber <simon.barber[AT]meraki.net>
Simon Graham <simgrxp[AT]gmail.com>
Simon Long <hobei[AT]whitedoor.plus.com>
Simon Vans-Colina <simon[AT]monzo.com>
Simon Zhong <szhong.jnpr[AT]gmail.com>
Slava Shwartsman <slavash[AT]mellanox.com>
Sontol Bonggol <sonbonggol[AT]gmail.com>
Soumya Koduri <skoduri[AT]redhat.com>
Steev Klimaszewski <threeway[AT]gmail.com>
Stefan Battmer <stefan.battmer[AT]matrix-vision.de>
Stefan Doehla <stefan.doehla[AT]iis.fraunhofer.de>
Stefan Hajnoczi <stefanha[AT]redhat.com>
Stefan Poeschel <github[AT]basicmaster.de>
Stefan Voelkel <sv[AT]its-v.de>
Stella Randall <stella.randall[AT]emeerson.com>
Stephan Kappertz <octopus.sk[AT]googlemail.com>
Stephane Bryant <stephane.ml.bryant[AT]gmail.com>
Sunil Mushran <sunil.mushran[AT]oracle.com>
Sven Eckelmann <sven[AT]open-mesh.com>
Sven Schnelle <svens[AT]stackframe.org>
Sylvain Munaut <tnt[AT]246tNt.com>
T. Scholz <scholzt234[AT]googlemail.com>
Tadeusz Struk <tadeusz.struk[AT]intel.com>
Taisuke Sasaki <taisasak[AT]cisco.com>
Tatsuhiro Tsujikawa <tatsuhiro.t[AT]gmail.com>
Thibault Gerondal <github[AT]tycale.be>
Thies Moeller <thies.moeller[AT]baslerweb.com>
Thomas Chen <funorpain[AT]gmail.com>
Thomas Klausner <tk[AT]giga.or.at>
Thomas Portassau <thomas.portassau[AT]hotmail.fr>
Thomas Shen <thomashen[AT]gmail.com>
Tigran Mkrtchyan <tigran.mkrtchyan[AT]desy.de>
Tim (Thanh) Nguyen <tnnguyen[AT]broadcom.com>
Tim Cuthbertson <tim[AT]gfxmonk.net>
Tim Furlong <tim.furlong[AT]gmail.com>
Timo Warns <timow+github[AT]DiningPhilosopher.DE>
Timothy Geiser <slimshady007[AT]inbox.lv>
Tobias Brunner <tobias[AT]strongswan.org>
Tobias Stoeckmann <tobias[AT]stoeckmann.org>
Tom <tom916[AT]qq.com>
Tom Haynes <loghyr[AT]primarydata.com>
Tomas Kukosa <tomas.kukosa[AT]ixperta.com>
Trond Myklebust <trond.myklebust[AT]primarydata.com>
Ulf <ulf33286[AT]gmail.com>
Uli Schlachter <psychon[AT]znc.in>
Umberto Corponi <umberto.corponi[AT]athonet.com>
Uri Simchoni <urisimchoni[AT]gmail.com>
Vadim Yanitskiy <axilirator[AT]gmail.com>
Valentin Vidic <Valentin.Vidic[AT]CARNet.hr>
Vasil Velichkov <vvvelichkov[AT]gmail.com>
Victor Barratault <victor.barratault[AT]gmail.com>
Victor Dodon <dodonvictor[AT]gmail.com>
Victor Voronkov <victor.voronkov[AT]gmail.com>
Vidar Madsen <vidarino[AT]gmail.com>
Vik <vkp129+ubuntu[AT]gmail.com>
Vikhyat Umrao <vumrao[AT]redhat.com>
Vikram Hegde <vikram.h[AT]samsung.com>
Ville Skyttae <ville.skytta[AT]iki.fi>
Vincent Helfre <vincent.helfre[AT]gmx.net>
Vincenzo Reale <smart2128[AT]baslug.org>
Vladimir Kondratiev <qca_vkondrat[AT]qca.qualcomm.com>
Vladimir Rutsky <rutsky[AT]google.com>
Vladlen Popov <vladlen.popov[AT]yahoo.com>
Volker Lendecke <vl[AT]samba.org>
Volodymyr Khomenko <Khomenko.Volodymyr[AT]gmail.com>
Warren Moxam <warrenmptgrey[AT]gmail.com>
Wasim Abu Moch <wasim[AT]mellanox.com>
Weston Andros Adamson <dros[AT]primarydata.com>
Weston Schmidt <weston_schmidt[AT]alumni.purdue.edu>
Will Glynn <will[AT]willglynn.com>
Will Robertson <aliask[AT]gmail.com>
William Tu <u9012063[AT]gmail.com>
Xavier Brouckaert <xabrouck[AT]cisco.com>
Xiaochuan Sun <linuxvxworks[AT]gmail.com>
YFdyh000 <yfdyh000[AT]gmail.com>
Yan Burman <yanb[AT]mellanox.com>
Yang Luo <hsluoyz[AT]qq.com>
Yann Diorcet <yann[AT]diorcet.fr>
Yann Lejeune <ylejeune[AT]netyl.org>
Yasuyuki Tanaka <yasuyuki.tanaka[AT]inria.fr>
Yasuyuki Tanaka <yatch1.tanaka[AT]toshiba.co.jp>
Yuri Chislov <yuri.chislov[AT]gmail.com>
Yurii Lysyi <yurii.lysyi[AT]ericsson.com>
Yury Gargay <yury.gargay[AT]gmail.com>
ZdenXk Xambersky <zzdevel[AT]seznam.cz>
Zhao Lin <zlbinghamton[AT]gmail.com>
anonsvn <anonsvn[AT]localhost>
cff339 <cff339[AT]gmail.com>
cheloftus <cheloftus[AT]gmail.com>
chinarulezzz <alexandr.savca89[AT]gmail.com>
kardam <netkardam[AT]gmail.com>
kkoizumi <kkoizumi46[AT]gmail.com>
moguz <mehmet.oguz.mnz[AT]gmail.com>
shqking <shqking[AT]gmail.com>
tchang <tengfei.chang[AT]inria.fr>
ytti <saku[AT]ytti.fi>
Eric Piel <piel[AT]delmic.com>
Oyvind Ronningstad <ronningstad[AT]gmail.com>
XXXXXXX XXXXXXX <dmitrycvet[AT]gmail.com>
Acknowledgements
------------
Dan Lasley <dlasley[AT]promus.com> gave permission for his
dumpit() hex-dump routine to be used.
Mattia Cazzola <mattiac[AT]alinet.it> provided a patch to the
hex dump display routine.
We use the exception module from Kazlib, a C library written by
Kaz Kylheku <kaz[AT]ashi.footprints.net>. Thanks go to him for
his well-written library. The Kazlib home page can be found at
http://users.footprints.net/~kaz/kazlib.html
We use Lua BitOp, written by Mike Pall, for bitwise operations
on numbers in Lua. The Lua BitOp home page can be found at
http://bitop.luajit.org/
Henrik Brix Andersen <brix[AT]gimp.org> gave permission for his
webbrowser calling routine to be used.
Christophe Devine <c.devine[AT]cr0.net> gave permission for his
SHA1 routines to be used.
snax <snax[AT]shmoo.com> gave permission to use his(?) weak key
detection code from Airsnort.
IANA gave permission for their port-numbers file to be used.
We use the natural order string comparison algorithm, written by
Martin Pool <mbp[AT]sourcefrog.net>.
Emanuel Eichhammer <support[AT]qcustomplot.com> granted permission
to use QCustomPlot.
2.6.6 2019-01-23 WIRESHARK(1)