Provided by: texlive-binaries_2013.20130729.30972-2ubuntu0.1_amd64 
NAME
xdvi - DVI Previewer for the X Window System
SYNOPSIS
xdvi [+[page]] [--help] [-allowshell] [-altfont font] [-bg color] [-browser WWWbrowser] [-copy] [-cr
color] [-debug bitmask|string[,string ...]] [-display host:display] [-dvipspath path] [-editor command]
[-expert] [-expertmode flag] [-fg color] [-findstring string] [-text-encoding encoding] [-font font]
[-fullscreen ] [-gamma g] [-geometry geometry] [-gsalpha] [-gspalette palette] [-h] [-help] [-hl color]
[-anchorposition anchor] [-hush] [-hushchars] [-hushchecksums] [-warnpecials] [-hushstdout] [-hushbell]
[-icongeometry geometry] [-iconic] [-install] [-interpreter path] [-keep] [-l] [-license] [-linkcolor
color] [-linkstyle 0|1|2|3] [-margins dimen] [-mfmode mode-def[:dpi]] [-mgs[n] size] [-mousemode 0|1|2]
[-nocolor] [-nofork] [-noghostscript] [-nogrey] [-nogssafer] [-noinstall] [-nomakepk] [-nomatchinverted]
[-noomega] [-noscan] [-notype1fonts] [-notempfile] [-offsets dimen] [-p pixels] [-paper papertype]
[-pause] [-pausespecial special-string] [-postscript flag] [-rulecolor color] [-rv] [-S density] [-s
shrink] [-safer] [-sidemargin dimen] [-sourceposition line[:col][ ]filename] [-statusline] [-thorough]
[-topmargin dimen] [-unique] [-version] [-visitedlinkcolor color] [-warnspecials] [-watchfile secs]
[-wheelunit pixels] [-xoffset dimen] [-yoffset dimen] [dvi_file]
DESCRIPTION
Xdvi is a program for previewing dvi files, as produced e.g. by the tex(1) program, under the X window
system.
Xdvi can show the file shrunken by various integer factors, and it has a ``magnifying glass'' for viewing
parts of the page enlarged (see the section MAGNIFIER below). This version of xdvi is also referred to as
xdvik since it uses the kpathsea library to locate and generate font files. In addition to that, it
supports the following features:
- hyperlinks in DVI files (section HYPERLINKS),
- direct rendering of PostScript<tm> Type 1 fonts (section TYPE 1 FONTS),
- source specials in the DVI file (section SOURCE SPECIALS),
- string search in DVI files (section STRING SEARCH),
- saving or printing (parts of) the DVI file (sections PRINT DIALOG and SAVE DIALOG).
Xdvi can be compiled with the Motif toolkit or the Xaw (Athena) toolkit (and variants of it), and the
Motif version has a slightly different GUI; these differences are noted below.
Before displaying a page of a DVI file, xdvi will check to see if the file has changed since the last
time it was displayed. If this is the case, it will reload the file. This feature allows you to preview
many versions of the same file while running xdvi only once. Since it cannot read partial DVI files,
xdvik versions starting from 22.74.3 will create a temporary copy of the DVI file being viewed, to ensure
that the file can be viewed without interruptions. (The -notempfile can be used to turn off this
feature).
Xdvi can show PostScript<tm> specials by any of three methods. It will try first to use Display
PostScript<tm>, then NeWS, then it will try to use Ghostscript to render the images. All of these
options depend on additional software to work properly; moreover, some of them may not be compiled into
this copy of xdvi.
For performance reasons, xdvi does not render PostScript specials in the magnifying glass.
If no file name has been specified on the command line, xdvi will try to open the most recently opened
file; if the file history (accessible via the File > Open Recent menu) is empty, or if none of the files
in the history are valid DVI files, it will pop up a file selector for choosing a file name. (In
previous versions, which didn't have a file history, the file selector was always used; you can set the X
resource noFileArgUseHistory to false to get back the old behaviour.)
OPTIONS
In addition to specifying the dvi file (with or without the .dvi extension), xdvi supports the following
command line options. If the option begins with a `+' instead of a `-', the option is restored to its
default value. By default, these options can be set via the resource names given in parentheses in the
description of each option.
+page Specifies the first page to show. If + is given without a number, the last page is assumed; the
first page is the default.
-allowshell
(.allowShell) This option enables the shell escape in PostScript specials. (For security reasons,
shell escapes are disabled by default.) This option should be rarely used; in particular it
should not be used just to uncompress files: that function is done automatically if the file name
ends in .Z, .gz, or .bz2. Shell escapes are always turned off if the -safer option is used.
-altfont font
(.altFont) Declares a default font to use when the font in the dvi file cannot be found. This is
useful, for example, with PostScript <tm> fonts.
-background color
(.background) Determines the color of the background. Same as -bg.
-bg color
(.background) Determines the color of the background.
-browser browser
(.wwwBrowser) Defines the web browser used for handling external URLs. The value of this option or
resource has the same syntax as the BROWSER environment variable; see the explanation of that
variable in the section `ENVIRONMENT' below for a detailed description. If neither the option nor
the X resource wwwBrowser is specified, the environment variables BROWSER and WWWBROWSER (in that
order) are used to determine the browser command. If these are not set either, the following
default value is used: xdg-open %s:htmlview %s:firefox -remote -remote "openURL(%s,new-
window)":mozilla -remote "openURL(%s,new-window)":netscape -raise -remote "openURL(%s,new-
window)":xterm -e w3m %s:xterm -e lynx %s:xterm -e wget %s
-copy (.copy) Always use the copy operation when writing characters to the display. This option may be
necessary for correct operation on a color display, but overstrike characters will be incorrect.
If greyscale anti-aliasing is in use, the -copy operation will disable the use of colorplanes and
make overstrikes come out incorrectly. See also -thorough.
-cr color
(.cursorColor) Determines the color of the mouse cursor. The default is the same as the
foreground color.
-debug bitmask|string[,string ...]
(.debugLevel) If nonzero, prints additional information on standard output. The argument can be
either a bitmask specified as a decimal number, or comma-separated list of strings.
For the bitmask representation, multiple values can be specified by adding the numbers that
represent the individual bits; e.g. to debug all all file searching and opening commands, use 4032
(= 2048 + 1024 + 512 + 256 + 128 + 64). Use -1 to turn on debugging of everything (this will
produce huge output).
For the string representation, use the strings listed in the following table, with a comma to
separate the values; e.g. to debug all file searching and opening commands, use
search,expand,paths,hash,stat,open. (The option `kpathsea' is provided as a shorthand for these.)
Note that such a list may need to be quoted to prevent the shell from interpreting commas or
spaces in the list.
The individual numbers and strings have the following meanings:
1 bitmap Bitmap creation
2 dvi DVI translation
4 pk PK fonts
8 batch Batch mode: Exit after
reading the DVI file
16 event Event handling
32 ps PostScript interpreter calls
64 stat Kpathsea stat(2) calls
128 hash Kpathsea hash table lookups
256 open Kpathsea file opening
512 paths Kpathsea path definitions
1024 expand Kpathsea path expansion
2048 search Kpathsea searching
4032 kpathsea All Kpathsea options
4096 htex Hypertex specials
8192 src Source specials
16384 client Client/server mode (see -unique
and -sourceposition options)
32768 ft FreeType library messages (Type 1 fonts)
65536 ft_verbose Verbose FreeType library messages (currently unused)
131072 gui GUI elements
Some of the Kpathsea debugging options are actually provided by Kpathsea; see the Debugging
section in the Kpathsea manual for more information on these.
-density density
(.densityPercent) Determines the density used when shrinking bitmaps for fonts. A higher value
produces a lighter font. The default value is 40. If greyscaling is in use, this argument does
not apply; use -gamma instead. See also the `S' keystroke. Same as -S.
-display host:display
Specifies the host and screen to be used for displaying the dvi file. By default this is obtained
from the environment variable DISPLAY.
-dvipspath path
(.dvipsPath) Use path as the dvips program to use when printing. The default for this is dvips.
The program or script should read the DVI file from standard input, and write the PostScript file
to standard output.
-editor editor
(.editor) Specifies the editor that will be invoked when the source-special() action is triggered
to start a reverse search (by default via Ctrl-Mouse 1). The argument to this option is a format
string in which occurrences of ``%f'' are replaced by the file name, occurrences of ``%l'' are
replaced by the line number within the file, and optional occurrences of ``%c'' are replaced by
the column number within the line.
If neither the option nor the X resource .editor is specified, the following environment variables
are checked to determine the editor command: XEDITOR, VISUAL, and EDITOR (in this sequence). If
the string is found as the value of the VISUAL or EDITOR environment variables, then ``xterm -e ''
is prepended to the string; if the editor is specified by other means, then it must be in the form
of a shell command to pop up an X window with an editor in it. If none of these variables is set,
a warning message is displayed and the command ``xterm -e vi +%l %f'' is used.
If no ``%f'' or ``%l'' occurs in the string, the missing format strings are appended
automatically. (This is for compatibility with other programs when using one of the environment
variables).
A new instance of the editor is started each time this command is used; therefore it is preferable
to use an editor that can be invoked in `client' mode to load new files into the same instance.
Example settings are:
emacsclient --no-wait
(older Emacsen)
gnuclient -q
(XEmacs and newer Emacsen)
gvim --servername xdvi --remote
(VIM v6.0+; the `--servername xdvi' option will cause gvim to run a dedicated instance for
the files opened by xdvi.)
nc (nedit)
Note that those strings need to be enclosed into quotes when using them on the command-line to
protect them from the shell; when using them as argument for the .editor resource in an X resource
file, no quotes should be used.
NOTE ON SECURITY: The argument of this option isn't executed as a shell command, but via exec() to
prevent evil tricks with the contents of source specials.
-expert
This option is only supported for backwards compatibility; it is equivalent to -expertmode 0,
which should be preferred.
-expertmode flag
(.expertMode) With an argument of 0, this option switches off the display of the buttons,
scrollbars, the toolbar (Motif only), the statusline and the page list. These GUI elements can
also be (de)activated separately, by combining the appropriate values in the flag argument. This
acts similar to the -debug option: The integer flag is treated as a bitmap where each bit
represents one element. If the bit has the value 1, the element is switched on, if it has the
value 0, the element is switched off. The meaning of the bits is as follows:
1 statusline
2 scrollbars
4 Motif: pagelist, Xaw: buttons and pagelist
8 toolbar (Motif only)
16 menubar (Motif only)
For example, to turn on only the statusline and the scrollbars, use 3 (= 1 + 2). See also the `x'
keystroke, where the bits are addressed by their positions, from 1 to 3 (Xaw) or 5 (Motif),
respectively.
If the statusline is not active, all messages that would normally be printed to the statusline will be
printed to stdout, unless the -hushstdout option is used.
-fg color
(.foreground) Determines the color of the text (foreground).
-text-encoding encoding
(.textEncoding) Use encoding as text encoding of the string in the "Find" window. Usually, this
shouldn't be needed since the encoding is determined from the locale settings.
-findstring string
This option triggers a search for string in the DVI file mentioned on the command-line, similar to
forward search (see the description of the sourceposition option): If there is already another
instance of xdvi running on the displaying that DVI file, it will cause that instance to perform
the search instead. The search starts at the top of the current page of the DVI file.
-font font
(*font) Sets the font used in menus, buttons etc., as described in the X(7x) man page. The font
for child windows can be set separately, e.g.:
xdvi*statusline*font: \
-*-helvetica-medium-r-*-*-12-*-*-*-*-*-*-*
-foreground color
Same as -fg.
-fullscreen
When this option is used, xdvi will (try to) run in fullscreen mode, with no window decorations.
This option is not guaranteed to work with all windowmanagers/desktops; if you're experiencing
problems with it, please use the -geometry option instead, and a suitable window manager setting
to remove the window decorations. When using this option for presentations, you might want to get
rid of all the control widgets as well, using the -expertmode option. This option can also be
toggled at runtime using the fullscreen action (by default bound to Ctrl-l).
-gamma gamma
(.gamma) Controls the interpolation of colors in the greyscale anti-aliasing color palette.
Default value is 1.0. For 0 < gamma < 1, the fonts will be lighter (more like the background),
and for gamma > 1, the fonts will be darker (more like the foreground). Negative values behave
the same way, but use a slightly different algorithm. For color and grayscale displays; for
monochrome, see -density. See also the `S' keystroke.
-geometry geometry
(.geometry) Specifies the initial geometry of the main window, as described in the X(7x) man page.
The geometry of child windows can be set separately, e.g.:
xdvi*helpwindow.geometry: 600x800
-gsalpha
(.gsAlpha) Causes Ghostscript to be called with the x11alpha driver instead of the x11 driver.
The x11alpha driver enables anti-aliasing in PostScript specials, for a nicer appearance. It is
available on newer versions of Ghostscript. This option can also be toggled with the `V'
keystroke.
-gspalette palette
(.palette) Specifies the palette to be used when using Ghostscript for rendering PostScript
specials. Possible values are Color, Greyscale, and Monochrome. The default is Color.
-h, -help, --help
Prints a short help text with an overview of the command-line options to standard output.
-hl color
(.highlight) Determines the color of the page border, of the ruler in `ruler mode', and of the
highlighting markers in forward search and string search. The default is the foreground color.
-anchorposition anchor
Jump to anchor after opening the DVI file. This is only useful when invoking xdvi from other
applications.
-hush (.Hush) Causes xdvi to suppress all suppressible warnings.
-hushchars
(.hushLostChars) Causes xdvi to suppress warnings about references to characters which are not
defined in the font.
-hushchecksums
(.hushChecksums) Causes xdvi to suppress warnings about checksum mismatches between the dvi file
and the font file.
-hushstdout
(.hushStdout) Suppresses printing of status messages to stdout. Note that errors or warnings will
still be printed to stderr even if this option is used.
-hushbell
(.hushBell) Don't sound the X bell when an error occurs.
-icongeometry geometry
(.iconGeometry) Specifies the initial position for the icon.
-iconic
(.iconic) Causes the xdvi window to start in the iconic state. The default is to start with the
window open.
-install
(.install) If xdvi is running under a PseudoColor visual, then (by default) it will check for
TrueColor visuals with more bits per pixel, and switch to such a visual if one exists. If no such
visual exists, it will use the current visual and colormap. If -install is selected, however, it
will still use a TrueColor visual with a greater depth, if one is available; otherwise, it will
install its own colormap on the current visual. If the current visual is not PseudoColor, then
xdvi will not switch the visual or colormap, regardless of its options. The default value of the
install resource is the special value, maybe. There is no +install option. See also -noinstall,
and the GREYSCALING AND COLORMAPS section.
-interpreter filename
(.interpreter) Use filename as the Ghostscript interpreter. By default it uses gs.
-keep (.keepPosition) Sets a flag to indicate that xdvi should not move to the home position when moving
to a new page. See also the `k' keystroke. This flag is honored by all page switching actions and
by up-or-previous() / down-or-next(), although the latter only honor the horizontal postion, not
the vertical one. This allows for a "continuous" scrolling back an forth through a document with
a display window narrower than a page width.
-l (.listFonts) List the names of all fonts used.
-license
Prints licensing information.
-linkcolor
(.linkColor) Color used for unvisited hyperlinks (`Blue2' by default). Hyperlinks are unvisited
before you click on them, or after the DVI file has been reloaded. The value should be either a
valid X color name (such as DarkGoldenrod4) or a hexadecimal color string (such as #8b6508). See
also -visitedlinkcolor and -linkstyle.
-linkstyle
(.LinkStyle) Determines the style in which hyperlinks are displayed. Possible values and their
meanings are:
0 No highlighting of links
1 Underline links with link color
2 No underlining, color text with link color
3 Underline and display text colored with
link color
The values for link color are specified by the options/resources -linkcolor and -visitedlinkcolor
(which see).
-margins dimen
(.Margin) Specifies the size of both the top margin and side margin. This determines the ``home''
position of the page within the window as follows. If the entire page fits in the window, then
the margin settings are ignored. If, even after removing the margins from the left, right, top,
and bottom, the page still cannot fit in the window, then the page is put in the window such that
the top and left margins are hidden, and presumably the upper left-hand corner of the text on the
page will be in the upper left-hand corner of the window. Otherwise, the text is centered in the
window. The dimension should be a decimal number optionally followed by any of the two-letter
abbreviations for units accepted by TeX (pt, pc, in, bp, cm, mm, dd, cc, or sp). By default, the
unit will be cm (centimeters). See also -sidemargin, -topmargin, and the keystroke `M.'
-mfmode mode-def
(.mfMode) Specifies a mode-def string, which can be used in searching for fonts (see ENVIRONMENT,
below). Generally, when changing the mode-def, it is also necessary to change the font size to
the appropriate value for that mode. This is done by adding a colon and the value in dots per
inch; for example, -mfmode ljfour:600. This method overrides any value given by the pixelsPerInch
resource or the -p command-line argument. The metafont mode is also passed to metafont during
automatic creation of fonts. By default, it is unspecified.
-mgs size
Same as -mgs1.
-mgs[n] size
(.magnifierSize[n]) Specifies the size of the window to be used for the ``magnifying glass'' for
Button n. The size may be given as an integer (indicating that the magnifying glass is to be
square), or it may be given in the form widthxheight. See the MOUSE ACTIONS section. Defaults
are 200x150, 400x250, 700x500, 1000x800, and 1200x1200.
-mousemode [0|1|2]
(.mouseMode) Specifies the default mode of xdvi at startup: Magnifier (0), Text Selection Mode (1)
or Ruler Mode (2). See the section MODES, below, for more information.
-nocolor
(.color) Turns off the use of color specials. This option can be toggled with the `C' keystroke.
(Note: -nocolor corresponds to color:off; +nocolor to color:on.)
-nofork
(.fork) With the -sourceposition and -unique options, the default behavior is for xdvi to put
itself into the background (like a daemon) if there is no appropriate instance of xdvi already
running. This argument makes it run in the foreground instead. This is useful for debugging, or
if your client application cannot deal well with a program self-backgrounding itself in this way
-- e.g., the IPC functions in emacs are known to have problems with this. If no -sourceposition
or -unique argument is given, then this option has no effect. (Note: -nofork corresponds to
fork:off; +nofork to fork:on.)
-noghostscript
(.ghostscript) Inhibits the use of Ghostscript for displaying PostScript<tm> specials. (Note:
-noghostscript corresponds to ghostscript:off; +noghostscript to ghostscript:on.)
-nogrey
(.grey) Turns off the use of greyscale anti-aliasing when printing shrunken bitmaps. (Note:
-nogrey corresponds to grey:off; +nogrey to grey:on.) See also the `G' keystroke.
-nogssafer
(.gsSafer) Normally, if Ghostscript is used to render PostScript specials, the Ghostscript
interpreter is run with the option -dSAFER. The -nogssafer option runs Ghostscript without
-dSAFER. The -dSAFER option in Ghostscript disables PostScript operators such as deletefile, to
prevent possibly malicious PostScript programs from having any effect. If the -safer option is
specified, then this option has no effect; in that case Ghostscript is always run with -dSAFER.
(Note: -nogssafer corresponds to gsSafer:off; +nogssafer to gsSafer:on.)
-noinstall
(.install) Inhibit the default behavior of switching to a TrueColor visual if one is available
with more bits per pixel than the current visual. (Note: -noinstall corresponds install:off;
there is no +noinstall option.) See also -install, and the GREYSCALING AND COLORMAPS section.
-nomakepk
(.makePk) Turns off automatic generation of font files that cannot be found by other means.
(Note: -nomakepk corresponds to makePk:off; +nomakepk to makePK:on.)
-nomatchinverted
(.matchInverted) Don't highlight string search matches in inverted color; instead, draw a
rectangle in highlight color (see the -hl option) around the match. This option is activated
automatically if the display isn't running in TrueColor. (Note: -nomatchinverted corresponds to
matchInverted:off; +nomatchinverted to matchInverted:on.)
-noomega
(.omega) This will disable the use of Omega extensions when interpreting DVI files. By default,
the additional opcodes 129 and 134 are recognized by xdvi as Omega extensions and interpreted as
requests to set 2-byte characters. The only drawback is that the virtual font array will require
65536 positions instead of the default 256 positions, i.e. the memory requirements of xdvi will be
slightly larger. If you find this unacceptable or encounter another problem with the Omega
extensions, you can switch this extension off by using -noomega (but please do send a bug report
if you find such problems - see the bug address in the AUTHORS section below).
(Note: -noomega corresponds to omega: off; +noomega to omega: on.)
-noscan
(.prescan) By default, xdvi does a preliminary scan of the dvi file to process any papersize
specials; this is especially important at startup since the paper size may be needed to determine
the window size. If PostScript<tm> is in use, then prescanning is also necessary in order to
properly process header files. In addition, prescanning is needed to correctly determine the
background color of a page. This option turns off such prescanning. (Prescanning will be
automatically be turned back on if xdvi detects any of the specials mentioned above.) (Note:
-noscan corresponds to prescan:off; +noscan to prescan:on.)
-notype1fonts
(.type1) This will disable the use of the FreeType library to display PostScript<tm> Type 1 fonts.
Use this option as a workaround when you encounter problems with the display of Type 1 fonts (but
please don't forget to send a bug report in this case, to the URL mentioned in the section AUTHORS
below).
(Note: -notype1fonts corresponds to type1:off; +notype1fonts to type1:on.)
-notempfile
(.tempFile) As mentioned in the section DESCRIPTION above, xdvi will create a temporary copy of
the DVI file so that it can be accessed without interruptions even while the file is being
rewritten by TeX. Since this introduces the overhead of copying the file every time it has
changed, the -notempfile allows you to turn off this behaviour. In this case, exposing parts of
the window while the DVI file is being written by TeX will erase the current window contents until
the DVI file can be completely reread.
(Note: -notempfile corresponds to tempFile:off; +notempfile to tempFile:on.)
-offsets dimen
(.Offset) Specifies the size of both the horizontal and vertical offsets of the output on the
page. By decree of the Stanford TeX Project, the default TeX page origin is always 1 inch over
and down from the top-left page corner, even when non-American paper sizes are used. Therefore,
the default offsets are 1.0 inch. The argument dimen should be a decimal number optionally
followed by any of the two-letter abbreviations for units accepted by TeX (pt, pc, in, bp, cm, mm,
dd, cc, or sp). By default, the unit will be cm (centimeters). See also -xoffset and -yoffset.
-p pixels
(.pixelsPerInch) Defines the size of the fonts to use, in pixels per inch. The default value is
600. This option is provided only for backwards compatibility; the preferred way is to set both
the resolution and the Metafont mode via the -mfmode option (which see).
-paper papertype
(.paper) Specifies the size of the printed page. Note that in most cases it's best to specify the
paper size in the TeX input file via the line
\usepackage[dvips]{geometry}
which will be recognized by both dvips and xdvi; in that case the use of a `-paper' option should
be unnecessary.
The paper size may be specified in the form widthxheight optionally followed by a unit, where
width and height are decimal numbers giving the width and height of the paper, respectively, and
the unit is any of the two-letter abbreviations for units accepted by TeX (pt, pc, in, bp, cm, mm,
dd, cc, or sp). By default, the unit is cm (centimeters).
There are also synonyms which may be used: us (8.5x11in), legal (8.5x14in), foolscap (13.5x17in),
as well as the ISO sizes a1-a7, b1-b7, c1-c7. Each of these also has a landscape or `rotated'
variant: usr (11x8.5in), a1r-a7r, etc. For compatibility with dvips, the formats letter
(8.5x11in), ledger (17x11in) and tabloid (11x17in) are also supported (these don't have rotated
variants).
Any of the above sizes may be preceded by a plus sign (`+'); this causes the paper size given here
to override any paper size given in the dvi file. The default paper size is 21 x 29.7 cm (A4
size).
-pause (.pause) This option provides a simple implementation of incremental (stepwise) display, which can
be used for presentations. When this option is used, xdvi will pause the display of the current
page whenever it encounters a special special-string (xdvi:pause by default; the string can be
customized via -pausespecial, see below), and the cursor will change its shape. The action
unpause-or-next() (by default bound to the Space key) will display the next portion of the page up
to the following special-string, or until the end of the page is reached. When the option is not
used, specials containing special-string will be ignored.
-pausespecial special-string
(.pauseSpecial) Sets the special string that causes xdvi to pause when the -pause option is
active. The default value of special-string is xdvi:pause.
-postscript flag
(.postscript) If flag = 0, rendering of PostScript<tm> specials is disabled; instead, bounding
boxes will be displayed (if available). A value of 1 (the default) switches PostScript<tm>
specials on. With a value of 2, the PostScript<tm> specials are displayed along with their
bounding boxes; this allows you to visually check the correctness of the bounding boxes. The
values can also be toggled at runtime with the `v' keystroke and the corresponding numerical
prefix arguments 0, 1 and 2.
-ps2pdfpath path
(.ps2pdfPath) Use path as a conversion program from PostScript to PDF. The program or script
should accept two command-line arguments: The PostScript file as first argument, and the PDF
output file as second argument.
-rulecolor color
(.ruleColor) Determines the color of the rules used for the the magnifier (default: foreground
color).
-q (.noInitFile) Ignore the $HOME/.xdvirc startup file (i.e. don't read it at startup, and don't
write it at exit). This forces the defaults defined in $HOME/.Xdefaults to be used. See FILES for
more information on $HOME/.xdvirc.
-rv (.reverseVideo) Causes the page to be displayed with white characters on a black background,
instead of vice versa.
-S density
(.densityPercent) Same as -density (which see).
-s shrink
(.shrinkFactor) Defines the initial shrink factor. The default value is 8. If shrink is given as
0, then the initial shrink factor is computed so that the page fits within the window (as if the
`s' keystroke were given without a number).
-safer (.safer) This option turns on all available security options; it is designed for use when xdvi is
called by a browser that obtains a dvi or TeX file from another site. This option selects
+nogssafer and +allowshell.
-sidemargin dimen
(.sideMargin) Specifies the side margin (see -margins).
-sourceposition line[:col][ ]filename
This option makes xdvi search in the dvi file for the place corresponding to the indicated line
(and, optionally, column) in the .tex source file, and highlight the place found by drawing a
rectangle in the highlight color (see the -hl option) around the corresponding text. In addition,
when run with this argument (and the -nofork option is not given, which see), xdvi will always
return immediately: if it finds another instance of xdvi already showing dvi_file, then it will
cause that instance to raise its window and move to the given place in the dvi file; otherwise it
will start up its own instance in the background. If several instances of xdvi are displaying the
respective dvi file, the instance which was last raised to the foreground will be used.
The space before filename is only needed if the filename starts with a digit. When the space is
used, the argument needs to be enclosed in quotes to prevent the shell from misinterpreting the
space as argument separator.
This option requires that dvi_file be prepared with source special information. See the section
on SOURCE SPECIALS for details on how to do this.
Here is a more detailed description of how the filename in the -sourceposition argument is matched
with the filename in the source specials:
1. If neither of the filenames contains a path name component, the filenames are compared ignoring
the `.tex' extensions in both filenames.
2. Otherwise, if one of the filenames does contain a path component (e.g.: ./test.tex,
../test.tex, /my/homedir/tex/test.tex or any combination of these), both filenames are expanded
to a full path, with any occurrences of ../ and ./ expanded, and multiple slashes removed.
The pathname in the -sourceposition is expanded relative to the current working directory of
the xdvi -sourceposition invocation, and the pathnames in the source specials are expanded
relative to the path of the current DVI file being viewed.
The path names are then compared ignoring the `.tex' extensions in both path names.
-statusline
(.statusline) This option is obsolete; use -expertmode flag instead (which see).
-thorough
(.thorough) Xdvi will usually try to ensure that overstrike characters (e.g., \notin) are printed
correctly. On monochrome displays, this is always possible with one logical operation, either and
or or. On color displays, however, this may take two operations, one to set the appropriate bits
and one to clear other bits. If this is the case, then by default xdvi will instead use the copy
operation, which does not handle overstriking correctly. The -thorough option chooses the slower
but more correct choice. See also -copy.
-topmargin dimen
(.topMargin) Specifies the top and bottom margins (see -margins).
-unique
(.unique) This option will make another instance of xdvi running on the same display act as a
`server'. For example, the invocation
xdvi -unique +5 file.dvi
will cause this other instance to load file.dvi on page 5 in place of the file that it is
currently displaying. If there is already another instance of xdvi already displaying the file
file.dvi, then it will just jump to page 5. If the other instance of xdvi is displaying a
different file, it will load file.dvi instead. Otherwise, if no other instance of xdvi is
currently running on the display, this option instead starts a new instance of xdvi in the
background (unless the -nofork option is specified, which see) displaying page 5 of file.dvi.
The filename and the +n option for the page number are the only options available for controlling
a remote instance of xdvi like this; all other options are currently ignored.
-useTeXpages
Use logical TeX pages (the values of the \count0 register) instead of physical pages for the
pagelist labels and when jumping to a page in a document with the `g' keystroke (or the goto-
page() action). This option can be toggled via the `T' keystroke.
-version
Print information on the version of xdvi.
-visitedlinkcolor
(.visitedLinkColor) Color used for visited hyperlinks (`Purple4' by default). Hyperlinks become
visited once you click on them. As for linkColor, the value should be either a valid X color name
or a hexadecimal color string.
-warnspecials
(.warnSpecials) Causes xdvi to print warnings about \special strings that it cannot process to
stderr. These warnings are suppressed by default.
-watchfile n
(.watchFile) If this option is set to a value larger than 0, xdvi will check the DVI file for
changes every n seconds. If the DVI file has been completely written by TeX, it will be reloaded
automatically. Fractional values (e.g. `2.5') are possible. The default for this option is 0,
i.e. no watching.
Since xdvi cannot handle partial DVI files, it tries not to reload the file while it is being
rewritten. However, use of the magnifier or switching of pages requires reading (a part of) the
DVI file, and if the tempfile option is switched off, this will erase the current contents of the
window until the DVI file can be read entirely.
-wheelunit pixels
(.wheelUnit) Sets the number of pixels that a motion of a wheel mouse will move the image up,
down, left, or right. (See the wheel and hwheel actions, below, for more information on this.) If
set to zero, the wheel mouse functionality is (essentially) disabled. The default value is 80.
-xoffset dimen
(.xOffset) Specifies the size of the horizontal offset of the output on the page. See -offsets.
-yoffset dimen
(.yOffset) Specifies the size of the vertical offset of the output on the page. See -offsets.
KEYSTROKES
Xdvi recognizes the following keystrokes when typed in its window. Each may optionally be preceded by a
(positive or negative) number, a `prefix argument', whose interpretation will depend on the particular
keystroke. This prefix argument can be discarded by pressing the ``Escape'' key. If present, the
``Help'', ``Prior'' and ``Next'' keys are synonyms for `?', `b', and `f' keys, respectively.
The key bindings listed here are those that xdvi assigns by default. The names appearing in brackets at
the beginning of the descriptions are the names of the actions associated with the keys; these can be
used to customize the key bindings, as explained in more detail in the section CUSTOMIZATION below. If
only a lowercase binding is listed, both upper- and lowercase keys will work for that binding.
ESC key
[discard-number()] The escape key discards the numerical prefix for all actions (useful when you
mistyped a number).
Return key
[forward-page()] Moves to the next page (or to the nth next page if a number is given). Synonyms
are `n', `f' and Line Feed.
Backspace key
[back-pagee()] Moves to the previous page (or back n pages). Synonyms are `p', `b' and Ctrl-h.
Delete key
[up-or-previous()] Moves up two-thirds of a window-full, or to the top of the previous page if
already at the top of the page. With a float argument, moves up the corresponding fraction of a
window-full.
Space key
[unpause-or-next()] Moves down two-thirds of a window-full, or to the next page if already at the
bottom of the page.
When the option -pause special-string is used and the display is currently paused, this key will
instead display the next portion of the page until the next special-string or the end of the page
is encountered. See the description of the -pause option for details. The action [down-or-next()]
does a similar thing, but without pausing; it is not bound to a key by default.
Ctrl-Home (Xaw), Ctrl-osfBeginLine (Motif)
[goto-page(1)] Moves to the first page of the document.
Ctrl-End (Xaw), Ctrl-osfEndLine (Motif)
[goto-page()] Moves to the last page of the document.
Home (Xaw), osfBeginLine (Motif)
[home-or-top()] Move to the ``home'' position of the page, or to the top of the page if the keep
flag is set (in this case, the page doesn't scroll horizontally).
End (Xaw), osfEndLine (Motif)
[end-or-bottom()] Move to the ``end'' position of the page (the lower right-hand corner), or to
the bottom of the page if the keep flag is set (in this case, the page doesn't scroll
horizontally).
Down arrow
[down(0.015)] Scrolls page down.
Up arrow
[up(0.015)] Scrolls page up.
Right arrow
[right(0.015)] Scrolls page right.
Left arrow
[left(0.015)] Scrolls page left.
Alt-Ctrl-+
[change-density(25)] Increase the darkness of the fonts in the DVI window by adding to the gamma
value (see also the `S' keystroke).
Alt-Ctrl--
[change-density(-25)] Decrease the darkness of the fonts in the DVI window by subtracting from the
gamma value (see also the `S' keystroke).
Ctrl-+ [set-shrink-factor(+)] Increase the shrink factor (see also the `s' keystroke).
Ctrl-- [set-shrink-factor(-)] Decrease the shrink factor (see also the `s' keystroke).
Ctr-[ [pagehistory-delete-backward()] Delete the current item in the page history and move to the
history item before the deleted one. With a prefix argument n, delete n previous history items.
See PAGE HISTORY for details.
[ [pagehistory-back()] Move back in the page history (see PAGE HISTORY for details). With a prefix
argument n, move back n history items.
Ctr-] [pagehistory-delete-forward()] Delete the current item in the page history and move to the history
item after the deleted one. With a prefix argument n, delete n next history items. See PAGE
HISTORY for details.
] [pagehistory-forward()] Move forward in the page history (see PAGE HISTORY for details). With a
prefix argument n, move forward n history items.
^ [home()] Move to the ``home'' position of the page. This is normally the upper left-hand corner
of the page, depending on the margins as described in the -margins option, above.
? [help()] Same as the h key (which see).
B [htex-back()] This key jumps back to the previous hyperlink anchor. See the section HYPERLINKS for
more information on navigating the links.
b [back-page()] Moves to the previous page (or back n pages). Synonyms are `p', Ctrl-h and
Backspace.
C [set-color()] This key toggles the use of color specials. The key sequences `0C' and `1C' turn
interpretation of color specials off and on, respectively. See also the -nocolor option.
c [center()] Moves the page so that the point currently beneath the mouse cursor is moved to the
middle of the window, and warps the mouse cursor to the same place.
D [toggle-grid-mode()] This key toggles the use of a grid on the displayed page. If no number is
given, the grid mode is switched on or off. By prepending a number from 1 to 3, 3 different grid
levels can be set. The units of the grid are inches or centimeters, depending on whether the
paper format is letter (in) or a4 (cm).
d [down()] Moves page down two thirds of a window-full. With a float argument to ``down'', moves
down the corresponding fraction of a window-full.
Ctrl-f [find()] Pop up a window to search for a string in the DVI file. See the section STRING SEARCH,
below, for more details.
f [forward-page()] Moves to the next page (or to the nth next page if a number is given). Synonyms
are `n', Return, and Line Feed.
G [set-greyscaling()] This key toggles the use of greyscale anti-aliasing for displaying shrunken
bitmaps. In addition, the key sequences `0G' and `1G' clear and set this flag, respectively. See
also the -nogrey option.
If given a numeric argument that is not 0 or 1, greyscale anti-aliasing is turned on, and the
gamma resource is set to the value divided by 100. E.g., `150G' turns on greyscale and sets gamma
to 1.5.
Ctrl-g [find-next()] Find the next match string in the DVI file; this can be used instead of pressing the
`Find' button in the search window.
g [goto-page()] Moves to the page with the given number. If no page number is given, xdvi jumps to
the last page.
If the option/resource useTeXpages is active, the numbers correspond to the actual page numbers in
the TeX file; otherwise, absolute page numbers (starting from 1) are used. In the latter case, the
page numbers can be changed with the `P' keystroke, below. Note that with the useTeXpages option
it is possible that the same page number occurs multiple times; in such a case, xdvi will use the
first page number that matches.
h Pops up a help window with a short explanation of the most important key bindings and concepts.
k [set-keep-flag()] Normally when xdvi switches pages, it moves to the home position as well. The
`k' keystroke toggles a `keep-position' flag which, when set, will keep the same position when
moving between pages. Also `0k' and `1k' clear and set this flag, respectively. See also the
-keep option.
Ctrl-l [fullscreen(toggle)] Toggles fullscreen mode (see the description of the -fullscreen option for
more information on this). This is even more flaky than using the command-line option: There is no
universal standard how a window could change its own geometry or window decorations at run-time,
so this will not work with most window managers or desktops. Generally, it's better to use the
window manager controls to change the size or decorations of the xdvi window.
l [left()] Moves page left two thirds of a window-full.
M [set-margins()] Sets the margins so that the point currently under the mouse cursor defines the
upper left-hand corner of the text in the page. Note that the command does not move the image,
but only determines the margins for the page switching commands. For details on how the margins
are used, see the -margins option.
m [toggle-mark()] Toggles the mark for the current page in the page list. When a page is marked, it
is displayed with a small star `*' next to the page number. The marked pages can then be printed
or saved to a file. A page or several pages can also be marked by clicking or dragging Mouse-2 in
the page list.
Ctrl-n [toggle-mark()forward-page()] Toggles the mark for the current page in the page list, and moves to
the next page. This lets you quickly mark a series of subsequent pages.
n [forward-page()] Moves to the next page (or to the nth next page if a number is given). Synonyms
are `f', Return, and Line Feed.
Ctrl-o [select-dvi-file()] Read a new dvi file. A file-selection widget is popped up for you to choose
the DVI file from. If a prefix argument n is given, the n th file from the file history is opened
instead.
P [declare-page-number()] ``This is page number n.'' This can be used to make the `g' keystroke
refer to a different page number than the physical page. (If you want to use `logical' or TeX
page numbers instead of physical pages, consider using the option -useTeXpages instead.) The
argument n should be given as prefix to this key.
Ctrl-p [print()] Opens a popup window for printing the DVI file, or parts of it. See the section PRINT
DIALOG for an explanation of the options available, and the resources to customize the default
behaviour.
p [back-page()] Moves to the previous page (or back n pages). Synonyms are `b', Ctrl-h and
Backspace.
q [quit()] Quits the program.
Ctrl-r [forward-page(0)] Redisplays the current page.
R [reread-dvi-file()] Forces the dvi file to be reread. This allows you to preview many versions of
the same file while running xdvi only once.
r [right()] Moves page right two thirds of a window-full.
Ctrl-s [save()] Opens a popup window for saving the DVI file, or parts of it. See the section SAVE DIALOG
below for more information on this.
S [set-density()] Sets the density factor to be used when shrinking bitmaps. This should be a
number between 0 and 100; higher numbers produce lighter characters. If greyscaling mode is in
effect, this changes the value of gamma instead. The new value of gamma is the given number
divided by 100; negative values are allowed.
s [set-shrink-factor()] Changes the shrink factor to the given number. If no number is given, the
smallest factor that makes the entire page fit in the window will be used. (Margins are ignored
in this computation.)
T [use-tex-pages()] Use logical TeX pages (the values of the \count0 register) instead of physical
pages for the pagelist labels and when jumping to a page in a document via goto-page(). See also
the -useTeXpages option.
t [switch-magnifier-units()] Switches the units used for the magnifier tick marks, and for reporting
the distance between the mouse pointer and the ruler centre in ruler mode (see the section MODES).
The default value is specified by the X resource tickUnits (`mm' by default). The units toggle
through the following values; except for `px', they all correspond to TeX's units: mm
(millimeters) pt (TeX points), in (inches), sp (scaled points, the unit used internally by TeX) bp
(big points or `PostScript points'), cc (cicero points), dd (didot points), pc (pica), and px
(screen pixels).
Ctrl-u [back-page()toggle-mark()] Moves to the previous page, and toggles the mark for that page. This is
the dual action to Ctrl-n.
u [up()] Moves page up two thirds of a window-full. With a float argument to ``up'', moves up the
corresponding fraction of a window-full.
Ctrl-v [show-source-specials()] Show bounding boxes for every source special on the current page, and
print the strings contained in these specials to stderr. With prefix 1, show every bounding box on
the page. This is for debugging purposes mainly.
V [set-gs-alpha()] This key toggles the anti-aliasing of PostScript<tm> specials when Ghostscript is
used as renderer. In addition the key sequences `0V' and `1V' clear and set this flag,
respectively. See also the -gsalpha option.
v [set-ps()] This key toggles the rendering of PostScript<tm> specials between 3 states:
- specials (like EPS graphics) are displayed;
- specials are displayed along with their bounding box (if available);
- only the bounding box is displayed.
The states can also be selected directly by using `1v', `2v' and `0v' respectively. See also the
-postscript option.
Ctrl-x [source-what-special()] Display information about the source special next to the mouse cursor in
the statusline. This is the same special that would be found by source-special(), but without
invoking the editor. For debugging purposes.
x [set-expert-mode()] Toggles expert mode, in which the statusline, the scrollbars, the menu
buttons, the toolbar (Motif only) and the page list are not shown. Typing `1x' toggles the
display of the statusline at the bottom of the window. Typing `2x' toggles the scrollbars (if
available). For Xaw, `3x' toggles the menu buttons and the page list, for Motif, it toggles the
page list. In Motif, the additional bindings `4x' toggle the toolbar, and `5x' the menu bar.
Without a prefix argument, all of the mentioned GUI elements are either switched on (if they had
been invisible before) or off.
Toggling the scrollbars may behave erratically with the Xaw widgets; e.g. the scrollbars may
reappear after resizing the window, and at certain window sizes one of the scrollbars may fail to
disappear.
See also the option -expertmode (the numbers above correspond to the bits in the argument to
-expertmode).
MOUSE ACTIONS IN THE MAIN WINDOW
The mouse actions can be customized by setting the X resource mouseTranslations. Since there are three
different mouse modes (see the section MODES below), there is a special action mouse-modes which lists
the actions for each of the three modes: mouse-modes("ACTIONS-FOR-MODE1", "ACTIONS-FOR-MODE2", "ACTIONS-
FOR-MODE3"). If only one argument is specified, this action is used for all modes. The default bindings
are as follows:
xdvi.mouseTranslations: \
Shift<Btn1Down>:mouse-modes("drag(+)")\n\
Shift<Btn2Down>:mouse-modes("drag(|)")\n\
Shift<Btn3Down>:mouse-modes("drag(-)")\n\
Ctrl<Btn1Down>:mouse-modes("source-special()")\n\
<Btn1Down>: mouse-modes("do-href()magnifier(*2)", "text-selection()", "ruler()")\n\
<Btn2Down>: mouse-modes("do-href-newwindow()magnifier(*2)", "text-selection()", "ruler()")\n\
<Btn3Down>: mouse-modes("magnifier(*3)")\n\
<Btn4Down>: mouse-modes("wheel(-0.2)")\n\
<Btn5Down>: mouse-modes("wheel(0.2)")\n\
<Btn6Down>: mouse-modes("hwheel(-0.2)")\n\
<Btn7Down>: mouse-modes("hwheel(0.2)")\n\
All of these actions are described in more detail below. Note the use of quote symbols around the action
strings, which are necessary to group them into one argument. Buttons 4, 5, 6, and 7 refer to wheel
movements (wheel up/down/left/right) on wheel mice. Not all mice support horizontal scrolling.
The X Toolkit routines that implement translations do not support event types of Btn6Down or Btn7Down.
Because of this, xdvi implements its own parser for translations given in mouseTranslations. This parser
is more limited than the parser built in to the X Toolkit. The string given in mouseTranslations should
not begin with ``#replace'', ``#augment'', or ``#override''. Modifiers of the form @keysym are not
supported, and the event type must be of the form BtnDown or BtnnDown, where n is a positive integer
without leading zeroes. Also, some limitations apply to the action field.
do-href()
do-href-newwindow()
Usually, if a binding specifies more then one action, all actions are executed in a sequence. The
hyperlink bindings do-href() and do-href-newwindow() are special in that they are used as an
alternative to other actions that might follow them if the mouse is currently located on a
hyperlink. In this case, none of the other actions will be executed; otherwise, only the other
actions are executed.
The action do-href() jumps to the link target in the current xdvi window (eventually switching to
another page), and do-href-newwindow() opens a new instance of xdvi for the link target. In both
cases, the location of the target is indicated by a small arrow drawn in the same color as a
visited link in the left corner of the window.
magnifier(n x m)
magnifier(*n)
This action will pop up a ``magnifying glass'' which shows the unshrunk image of the region around
the mouse pointer. The magnifier disappears when the mouse button is released. Moving the mouse
cursor while holding the button down will move the magnifier.
Different mouse buttons produce different sized windows, as indicated by the the argument of the
magnifier() action. Its argument is either a string of the form widthxheight, as in the -mgsn
command-line option, or one of the strings *1 through *5, referring to the value specified by the
corresponding -mgsn option.
drag(+)
drag(|)
drag(-)
Drags the page with the mouse. This action should have one parameter, the character ``|'', ``-'',
or ``+'', indicating vertical dragging only, horizontal dragging only, or dragging in all
directions.
source-special()
This action starts a ``reverse search'', opening the editor at the location in the TeX file
corresponding to the pointer location in the DVI file. See the section on SOURCE SPECIALS, below,
for more information on this.
wheel()
This action can be used to scroll the image with a wheel mouse, where it is usually bound to mouse
button 4 (wheel up) or 5 (wheel down). The action takes one parameter, giving the distance to
scroll the image. If the parameter contains a decimal point, the distance is given in wheel
units; otherwise, pixels. A negative value scrolls up, a positive value scrolls down.
hwheel()
This action can be used to scroll the image horizontally with a wheel mouse, where it is usually
bound to mouse button 6 (wheel left) or 7 (wheel right). The action takes one parameter, giving
the distance to scroll the image. If the parameter contains a decimal point, the distance is
given in wheel units; otherwise, pixels. A negative value scrolls left, a positive value scrolls
right. Not all mice support horizontal scrolling; this is mostly for touchpads, trackpads, etc.
text-selection()
This action allows you to mark a rectangular region of text in the DVI file. The text is put into
the X selection buffer and can be pasted into other applictions (e.g. text editors). This works
similar to the Plain text option in the Save dialog; see the discussion there for more information
on encoding issues.
ruler()
This action creates a cross-shaped ruler. Moving the mouse and holding the button down drags the
ruler and lets you measure distances on the page. See the section Ruler Mode for more information
on this.
UNBOUND ACTIONS
The following actions are not bound to a key by default, but are available for customization.
quit-confirm()
Pops up a confirmation window to quit xdvi. To bind it to the `q' key instead of the default
`quit()' action, put the following into your ~/.Xdefaults file:
xdvi.mainTranslations: #override\
<Key>q: quit-confirm()\n
down-or-next()
Similar to unpause-or-next(): Moves down two-thirds of a window-full, or to the next page if
already at the bottom of the page.
shrink-to-dpi()
This action takes one (required) argument. It sets the shrink factor to an integer so as to
approximate the use of fonts with the corresponding number of dots per inch. If xdvi is using
fonts scaled for p dots per inch, and the argument to shrink-to-dpi is n, then the corresponding
shrink factor is the ratio p/n, rounded to the nearest integer.
CUSTOMIZATION
Key and mouse button assignments can be changed by setting the mainTranslations resource to a string of
translations as defined in the documentation for the X toolkit. The actions should take the form of
action names listed in the KEYSTROKES and MOUSE ACTIONS sections.
An exception to this are the Motif keys osfPageUp (PgUp), osfPageDown (PgDown), osfBeginLine (Home) and
osfEndLine (End) which are currently not customizable in the Motif version.
Key actions will usually be without arguments; if they are passed an argument, it represents the optional
number or `prefix argument' typed prior to the action.
Some key actions may take special arguments, as follows: The argument of goto-page may be the letter `e',
indicating the action of going to the end of the document. The argument of set-shrink-factor may be the
letter `a', indicating that the shrink factor should be set to the smallest value such that the page will
fit in the window, or one of the signs `+' or `-', indicating that the shrink factor should be increased
or decreased, respectively. Finally, actions that would perform a toggle, such as set-keep-flag, may
receive an argument `t', indicating that the action should toggle regardless of the current prefix
argument.
Mouse actions should refer only to ButtonPress events (e.g., <Btn1Down>:magnifier(*1)). The
corresponding motion and release events will be handled internally. A key action may be bound to a mouse
event, but not vice versa.
Usually the string of translations should begin with ``#override'', indicating that the default key and
mouse button assignments should not be discarded.
When keys or mouse buttons involving modifiers (such as Ctrl or Shift) are customized together with their
non-modified equivalents, the modified keys should come first, for example:
xdvi.mainTranslations: #override \
Shift<Key>s: select-dvi-file()\n\
Ctrl<Key>s: save()\n\
<Key>s: find()\n
Because xdvi needs to capture pointer motion events, and because the X Toolkit translations mechanism
cannot accommodate both motion events and double-click events at the same time, it is not possible to
specify double-click actions in xdvi customizations. For information on this and other aspects of
translations, see the X Toolkit Intrinsics documentation.
There is no command-line option to set the mainTranslations resource, since changing this resource on the
command line would be cumbersome. To set the resource for testing purposes, use the -xrm command-line
option provided by the X toolkit. For example, xdvi -xrm 'XDvi.mainTranslations: #override "z":quit()'
... or xdvi -xrm 'XDvi.mainTranslations: #override <Key>z:quit()' ... will cause the key `z' to quit
xdvi.
Some resources are provided to allow customization of the geometry of the Xaw command buttons. Again,
they are not changeable via command-line options, other than via the -xrm option. All of these resources
take integer values.
buttonSideSpacing
The number of pixels to be placed on either side of the buttons. The default value is 6.
buttonTopSpacing
The number of pixels between the top button and the top of the window. The default value is 50.
buttonBetweenSpacing
The number of pixels between the buttons. The default value is 20.
buttonBetweenExtra
The number of pixels of additional space to be inserted if the buttonTranslations resource string
contains an extra newline character. The default value is 50.
buttonBorderWidth
The border width of the button windows. The default value is 1.
PAGE LIST
The scrollable page list on the right of the main window allows you to jump directly to a page in the DVI
file.
Mouse-1
Jumps to the page the mouse is located on.
Mouse-2
[toggle-mark()] Toggle the mark of the current page. The marks are used by the `Print' and `Save
to file' dialogs to select only marked pages from the DVI file.
When the mouse pointer is inside the page list, the mouse wheel switches to the next or previous page.
SCROLLBARS
The scrollbars (if present) behave in the standard way: pushing Button 2 in a scrollbar moves the top or
left edge of the scrollbar to that point and optionally drags it; pushing Button 1 moves the image up or
right by an amount equal to the distance from the button press to the upper left-hand corner of the
window; pushing Button 3 moves the image down or left by the same amount.
The scrollbars can be removed via the -expertmode flag/keystroke (which see).
MAGNIFIER
By default, the mouse buttons 1 to 5 will pop up a ``magnifying glass'' that shows an unshrunken image of
the page (i.e. an image at the resolution determined by the option/X resource pixels or mfmode) at
varying sizes. When the magnifier is moved, small ruler-like tick marks are displayed at the edges of the
magnifier (unless the X resource delayRulers is set to false, in which case the tick marks will always be
displayed). The unit of the marks is determined by the X resource tickUnits (mm by default). This unit
can be changed at runtime via the action switch-magnifier-units(), by default bound to the keystroke `t'
(see the description of that key, and of switch-magnifier-units() for more details on the units
available).
The length of the tick marks can be changed via the X resource tickLength (4 by default). A zero or
negative value suppresses the tick marks.
PAGE HISTORY
Xdvi keeps a history of viewed pages, and you can move through the history and delete items using the
keys [ (pagehistory-back()), ] (pagehistory-forward()), Ctr-[ (pagehistory-delete-backward()) and Ctr-]
(pagehistory-delete-forward()).
When one of the history commands is used, the page history is displayed in the status line at the bottom
of the window, with the current list item marked by square brackets `[', `]' and a left and right context
of at most 10 items. File boundaries are marked by `#'.
The size of the history can be customized with the X resource pageHistorySize (the default size is 1000
items). If the size is set to 0, the history commands are disabled.
HYPERLINKS
The actions do-href() and do-href-newwindow() (by default bound to Mouse-1 and Mouse-2 if the pointer is
currently located on a hyperlink) can be used to open the link target in the same window (do-href()) or
in a new window (do-href-newwindow()).
If the link target is not a file on the local disk, xdvi tries to launch a web browser (as specified by
the -browser command line option, the BROWSER environment variable or the wwwBrowser X resource, in this
order) to retrieve the document. See the description of the BROWSER environment variable, below, for an
example setting.
If the file is a local file, xdvi tries to determine if it is a DVI file. If it is, xdvi will try to
display the file; otherwise it will try to determine the MIME type of the file, and from that an
application suitable for opening the file. This is done by parsing the files specified by the
environment variable EXTENSIONMAPS for a mapping of filename extensions to MIME types, and the files
determined by the environment variable MAILCAPS for a mapping of MIME types to application programs. See
the descriptions of these variables in the section ENVIRONMENT, below, for a more detailed description
and the default values of these variables. If no suitable files are found, a set of built-in default MIME
types and applications is used.
Xdvi currently uses no heuristics apart from the filename suffix to determine the mime type of a file. If
a filename has no suffix, the value of the resource noMimeSuffix is used (by default application/x-
unknown). If the suffix doesn't match any of the suffixes in mime.types, the value of the resource
unknownMimeSuffix is used (by default application/x-unknown). If the mailcap entries do not list a
viewer for a given mime type, xdvi will show a warning popup. If you want to avoid this warning, and for
example want to always use the netscape browser for unknown MIME types, you could add the following line
to your ~/.mailcap file:
application/xdvi-unknown; \
netscape -raise -remote 'openURL(%s,new-window)'
STRING SEARCH
The keystroke Ctrl-f or the menu entry File > Find ... (or the `Binoculars' symbol in the toolbar, for
Motif) opens a dialog window to search for a text string or a regular expression in the DVI file. The
keystroke Ctrl-g jumps to the next match (like pressing the `Find' button in the search window).
By default, the matches are highlighted in inverted color. If the display isn't running in TrueColor, or
if the X resource matchHighlightInverted is set to false or the command-line option -nomatchinverted is
used, xdvi will instead draw a rectangle in highlight color (see the -hl option) around the match.
If a match crosses a page boundary, only the part on the first page is highlighted. Xdvi will scan up to
2 adjacent pages to match strings crossing page boundaries; but note that header or footer lines, or
intervening float pages will be treated as parts of the scanned text. Such text will usually cause multi-
page matching to fail.
This emphasizes the fact that searching in the formatted text (the DVI output) works differently from
searching in the source text: Searching in the DVI file makes it easier to skip formatting instructions,
and makes it possible to search for e.g. hyphenation and equation numbers; but sometimes the formatting
results can also get in the way, e.g. in the case of footnotes. In these cases it's better to search in
the TeX source instead. The use of source specials will make switching between the xdvi display and the
editor with the TeX source easier; see the section SOURCE SPECIALS below for more information on this.
The text extracted from the DVI file is in encoded in UTF-8 (you can view that text by saving the file in
UTF-8 format via the File > Save as ... menu item). If xdvi has been compiled with locale,
nl_langinfo() and iconv support, the search term is converted from the character set specified by the
current locale into UTF-8. (See the output of locale -a for a list of locale settings available on your
system). If nl_langinfo() is not available, but iconv is, you can specify the input encoding for iconv
via the X resource textEncoding (see the output of iconv -l for a list of valid encodings). If iconv
support is not available, only the encodings ISO-8859-1 and UTF-8 are supported (these names are case-
insensitive).
Ideographic characters from CJKV fonts are treated specially: All white space (spaces and newlines)
before and after such characters is ignored in the search string and in the DVI file.
To match a newline character, use \n in the search string; to match the string \n, use \\n.
If the checkbox Regular Expression is activated, the string is treated as a regular expression in
extended POSIX syntax, with the following properties:
- a? matches a zero or one times.
- a* matches a zero or more times.
- a+ matches a one or more times. Note that * and + are greedy, i.e. they match the longest possible
substring.
- The pattern . matches any character except for newline. To also match a newline, use `(.|\n)'.
- a{n} matches a exactly n times.
- a{n,m} matches a at least n and no more than m times.
- a|b matches a or b. Brackets can be used for grouping, e.g.: (a|b)|c.
- The string matched by the nth group can be referenced by \n, e.g. \1 refers to the first match.
- The characters ^ and $ match the beginning and the end of a line, respectively.
- [abc] matches any of the letters a, b, c, and [a-z] matches all characters from a to z.
- Each item in a regular expression can also be one of the following POSIX character classes:
[[:alnum:]] [[:alpha:]] [[:blank:]] [[:cntrl:]] [[:digit:]]
[[:graph:]] [[:lower:]] [[:print:]] [[:space:]] [[:upper:]]
These can be negated by inserting a ^ symbol after the first bracket: [^[:alpha:]]
For more details on POSIX regular expressions, see e.g. the IEEE Std 1003.1 standard definition
available online from:
http://www.opengroup.org/onlinepubs/007904975/basedefs/xbd_chap09.html
- As a non-standard extension, the following Perl-like abbreviations can be used instead of the POSIX
classes:
Symbol Meaning POSIX Class
\w an alphanumeric character [[:alnum:]]
\W a non-alphanumeric character [^[:alnum:]]
\d a digit character [[:digit:]]
\D a non-digit character [^[:digit:]]
\s a whitespace character [[:space:]]
\S a non-whitespace character [^[:space:]]
- The following characters are special symbols; they need to be escaped with \ in order to match them
literally: ( ) [ ] . * ? + ^ $ \.
- Matches of length zero are silently skipped.
The dialog also provides checkboxes to:
- search backwards;
- match in a case-sensitive manner (the default is to ignore case, i.e. a search string Test will match
both the strings test and TEST in the DVI file);
- ignore line breaks and hyphens: This removes all hyphens at the ends of lines and the following
newline characters, and replaces all remaining newline characters by white spaces. So hyphenated
words will appear as one word to the search, and a search for two words with a space in between will
also match the words if they are separated by a linebreak.
Note that the hyphen removal may cause unwanted side effects for compound words containing hyphens
that are wrapped after the hyphen, and that replacing the newlines affects the interpretation of
regular expressions as follows: The . pattern will also match newlines, and ^ and $ won't match begin
and end of lines any more. (Since currently there is no option for turning off the greediness of *
and +, turning on this option will usually result in matches that are longer than desired.)
The current checkbox settings are saved in the ~/.xdvirc file.
PRINT DIALOG
The print dialog window allows you to print all pages, marked pages (click or drag Mouse-2 in the page
list to mark them), or a range of pages. Note that the page numbers always refer to physical pages, so if
you're using the option `use TeX pages', you may want to disable it to make it easier to determine the
correct page numbers (or avoid this problem altogether by marking the pages to be printed).
The value of the Printer text filed is passed to dvips via the -o! mechanism, as a single argument after
the `!'. Any arguments listed in the Dvips options field are segmented at whitespaces and passed as
separate arguments to dvips. If you e.g. want to print the file 2-up, you should enter the following
string into the Printer field:
psnup -2 -q | lpr -Plp
There are several resources for customizing the behaviour and the default entries of the print dialog:
dvipsPrinterString
dvipsOptionsString
These can be used to provide default entries for the Printer and the Dvips options text fields,
respectively. If no paper size is specified in the DVI file (via e.g. \usepackage[dvips]{geometry}
- this is the preferred method), the input field is initialized with the current value of the
command line option/X resource paper. E.g., the option -paper a4r is translated into the dvips
options -t a4 -t landscape. Note that no check is performed whether dvips actually understands
these options (it will ignore them if it can't); currently not all options used by xdvi are also
covered by dvips.
dvipsHangTime
dvipsFailHangTime
These specify the time (in milliseconds) that the printing progress window will stay open after
the dvips process has terminated. The value of dvipsHangTime is used if the process terminates
successfully; dvipsFailHangTime is used if it terminates with an error. The default values are 1.5
and 5 seconds, respectively. If both values are negative, the window will stay open until it is
closed by the user.
SAVE DIALOG
This dialog allows you to save all or selected/marked pages in the current DVI file. You can save in one
of the following formats:
- PostScript (uses dvips to convert the DVI file to a PostScript file, just like when printing to a
PostScript file).
- PDF (first uses dvips to convert the DVI file to a PostScript file, then uses ps2pdf to convert the
PostScript file to PDF).
- Plain text in ISO-8859-1 or UTF-8 encoding. The latter will preserve more of the special LaTeX
characters e.g. from mathematical mode. Note however that e.g. only few of LaTeX's mathematical
symbols can be rendered correctly as text; so this funcionality works best for plain text documents.
If a character cannot be displayed in the selected charset, it is replaced by `\' followed by the
hexadecimal character code. If a character is not recognized at all, it is replaced by `?'.
The programs for PostScript and PDF conversion can be customized via the command line options or X
resources -dvipspath/.dvipsPath and -ps2pdfpath/.ps2pdfPath, respectively; see the explanation of these
options above for more details.
MODES
The keystroke Ctrl-m [switch-mode()] switches between three different mouse bindings, which can also be
activated via the Modes menu (in Motif, this is a submenu of the Options menu called Mouse Mode). The
default mode at startup can be customized via the X resource mouseMode or the command-line option
-mousemode. The default startup mode is Magnifier Mode.
Note: The modes are implemented by changing the magnifier() action. Switching the mode will not work if
Mouse-1 has been customized to an action sequence that does not contain the magnifier() action.
Magnifier Mode
In this mode, the mouse buttons 1 to 5 pop up a ``magnifying glass'' that shows an unshrunken
image of the page (i.e. an image at the resolution determined by the option/X resource pixels or
mfmode) at varying sizes. When the magnifier is moved, small ruler-like tick marks are displayed
at the edges of the magnifier (unless the X resource delayRulers is set to false, in which case
the tick marks are always displayed). The unit of the marks is determined by the X resource
tickUnits (mm by default). This unit can be changed at runtime via the action switch-magnifier-
units(), by default bound to the keystroke `t' (see the description of that key, and of switch-
magnifier-units() for more details on the units available).
The length of the tick marks can be changed via the X resource tickLength (4 by default). A zero
or negative value suppresses the tick marks.
Text Selection Mode
This mode allows you to select a rectangular region of text in the DVI file by holding down
Mouse-1 and moving the mouse. The text is put into the X primary selection so that it can be
pasted into other X applications with Mouse-2 as usual.
If xdvi has been compiled with locale, nl_langinfo() and iconv support, the selected text is
converted into the character set of the current locale (see the output of locale -a for a list of
locale settings available on your system). If nl_langinfo() is not available, but iconv is, you
can specify the input encoding for iconv via the X resource textEncoding (see the output of iconv
-l for a list of valid encodings). If iconv support is not available, only the encodings
ISO-8859-1 and UTF-8 are supported (these names are case-insensitive).
Note that UTF-8 is the only encoding that can render all characters (e.g. mathematical symbols) of
a DVI file. If ISO-8859-1 is active, characters that cannot be displayed are replaced by `\'
followed by the hexadecimal character code. For other encodings, such characters may trigger
iconv error messages. If a character is not recognized at all, it is replaced by `?'.
To extract larger portions of text, you can alternatively save selected pages or the entire file
in text format via the File > Save as ... menu.
Ruler Mode
This mode provides a simple way of measuring distances on the page.
When this mode is activated, the mouse cursor changes into a thin cross, and a larger, cross-
shaped ruler is drawn in the highlight color at the mouse location. The ruler doesn't have units
attached to it; instead, the current distance between the ruler and the mouse cursor is
continuously printed to the statusline.
When activating Ruler Mode, the ruler is at first attached to the mouse and can be moved around.
It can then be positioned at a fixed place by clicking Mouse-1. After that, the mouse cursor can
be moved to measure the horizontal (dx), vertical (dy) and direct (shortest) (dr) distance between
the ruler center point and the mouse.
Clicking Mouse-1 again will move the ruler to the current mouse position, and holding down Mouse-1
will drag the ruler around.
In Ruler Mode, the following special keybindings extend or replace the default bindings:
o [ruler-snap-origin()] Snap the ruler back to the origin coordinate (0,0).
t [overrides switch-magnifier-units()] Toggle between various ruler units, which can be
specified by the X resource tickUnits (`mm' by default).
P [overrides declare-page-number()] Print the distances shown in the statusline to standard
output.
TOOLBAR (Motif only)
The Motif toolbar can also be customized. The XPM file used for the toolbar icons can be specified via
the resource toolbarPixmapFile, which should contain a filename that can be found in one of
XFILESEARCHPATH or XDVIINPUTS (see the section FILE SEARCHING below for more information on these
variables). Xdvi will try to split this pixmap horizontally into n pieces, where each piece is as wide
as the pixmap is high and is treated as an image for toolbar button n. This means that each icon should
be a square, and that the entire pixmap should have width n x h if h is the height of the pixmap.
The resource toolbarTranslations can be used to map icons/buttons to specific actions. The resource
should contain a string separated by newline characters, similar to the resources mainTranslations and
menuTranslations. Every line must contain either a spacer definition, or an icon definition:
A spacer definition is a string SPACER(n), where n is the number of pixels inserted as separator to the
following button.
An icon definition is a colon-separated list containing the following elements:
- the index of an icon in the pixmap file (starting from zero);
- a long tooltip string, displayed in the status area;
- a short tooltip string, displayed as popup;
- a sequence of actions to be performed when the corresponding toolbar button is pushed.
To illustrate this, the default value of toolbarTranslations looks as follows:
xdvi.toolbarTranslations: \
SPACER(5)\n\
0:Open a new document (Key\\: Ctrl-f):\
Open file:select-dvi-file()\n\
SPACER(10)\n\
1:Reread this document (Key\\: R):\
Reread file:reread-dvi-file()\n\
SPACER(10)\n\
2:Go to the first page of this document (Key\\: 1g):\
Go to first page:goto-page(1)\n\
3:Go to the previous page of this document (Key\\: p):\
Go to previous page:back-page(1)\n\
4:Go to the next page of this document (Key\\: n):\
Go to next page:forward-page(1)\n\
5:Go to the last page of this document (Key\\: g):\
Go to last page:goto-page()\n\
SPACER(10)\n\
6:Enlarge the display (Key\\: Ctrl-+):Zoom in:\
set-shrink-factor(+)\n\
7:Shrink the display (Key\\: Ctrl--):Zoom out:\
set-shrink-factor(-)\n\
SPACER(10)\n\
8:Jump back to the previous hyperlink (Key\\: B):\
Back hyperlink:htex-back()\n\
SPACER(10)\n\
10:Print this document:Print:print()\n\
SPACER(10)\n\
11:Toggle marks for odd pages (Key\\: 1m):\
Toggle odd:toggle-mark(1)\n\
12:Toggle marks for even pages (Key\\: 2m):\
Toggle even:toggle-mark(2)\n\
13:Toggle mark for current page (Key\\: 2m):\
Toggle current:toggle-mark()\n\
14:Unmark all pages (Key\\: 0m):\
Unmark all:toggle-mark(0)\n\
SPACER(10)\n\
18:Display fonts darker (Key\\: Alt-Ctrl-+):\
Fonts darker:change-density(5)\n\
19:Display fonts lighter (Key\\: Alt-Ctrl--):\
Fonts lighter:change-density(-5)\n
When the mouse remains over a toolbar button for a certain period, a `tooltip' window is shown,
describing what the button does using the short tooltip string from the above resource. At the same time,
the long tooltip string is displayed in the statusline. The appearance and behaviour of these tooltips
can be customized via the following resources:
tipShell.background
Background color of the tooltip window.
tipShell.fontSet
Font used for the tooltip.
tipShell.waitPeriod
The time (in milliseconds) the mouse pointer needs to be over the button before the tooltip is
shown. Set it to a negative value to suppress the tooltips altogether.
GREYSCALING AND COLORMAPS
The greyscale anti-aliasing feature in xdvi will not work at its best if the display does not have enough
colors available. This can happen if other applications are using most of the colormap (even if they are
iconified). If this occurs, then xdvi will print an error message and turn on the -copy option. This
will result in overstrike characters appearing wrong; it may also result in poor display quality if the
number of available colors is very small.
Typically this problem occurs on displays that allocate eight bits of video memory per pixel. To see how
many bits per pixel your display uses, type xwininfo in an xterm window, and then click the mouse on the
root window when asked. The ``Depth:'' entry will tell you how many bits are allocated per pixel.
Displays using at least 15 bits per pixel are typically TrueColor visuals, which do not have this
problem, since their colormap is permanently allocated and available to all applications. (The visual
class is also displayed by xwininfo.) For more information on visual classes see the documentation for
the X Window System.
To alleviate this problem, therefore, one may (a) run with more bits per pixel (this may require adding
more video memory or replacing the video card), (b) shut down other applications that may be using much
of the colormap and then restart xdvi, or (c) run xdvi with the -install option.
One application which is often the cause of this problem is Netscape. In this case there are two more
alternatives to remedying the situation. One can run ``netscape -install'' to cause Netscape to install
a private colormap. This can cause colors to change in bizarre ways when the mouse is moved to a
different window. Or, one can run ``netscape -ncols 220'' to limit Netscape to a smaller number of
colors. A smaller number will ensure that other applications have more colors available, but will
degrade the color quality in the Netscape window.
HANDLING OF POSTSCRIPT FIGURES
Xdvi can display Encapsulated PostScript (EPS) files included in the dvi file. Such files are first
searched for in the directory where the dvi file is, and then using normal Kpathsea rules. There is an
exception to this, however: if the file name begins with a backtick (`), then the remaining characters
in the file name give a shell command (often zcat) which is executed; its standard output is then sent to
be interpreted as PostScript. Since the execution of arbitrary shell commands with the user's
permissions is a huge security risk, evaluation of these backtick commands is disabled by default. It
needs to be activated via the -allowshell command-line option. NOTE: You should never use this option
when viewing documents that you didn't compile yourself. The backtick specials are not needed for
uncompressing gzipped PostScript files, since xdvi can do that on the fly if the filename ends with
.eps.gz or .eps.Z (and if the first bytes of the file indicate that the file is indeed compressed). This
is both safer and more flexible than the backtick approach, since the default file searching rules will
apply to such filenames too.
TYPE 1 FONTS
Using FreeType (version 2), xdvi can render PostScript<tm> Type 1 fonts directly, without the route via
TeX pixel (pk) fonts. The advantage of this is that only one size of each font needs to be stored on
disk. Unless the -notype1fonts option is used, xdvi will try to render every font using FreeType. Only
as a fallback will it invoke an external program (like mktexpk, which in turn may invoke utilities like
ps2pk or gsftopk) to generate a pixel font from the Type 1 source. The direct rendering of the Computer
Modern fonts should work out-of-the box, whereas other Type 1 fonts such as the 35 `standard'
PostScript<tm> fonts resident in printers may need to be made accessible for use with xdvi, unless your
system administrator or TeX distribution has already done so (which is the case e.g. for current TeX Live
systems). For the 35 PostScript<tm> resident fonts, xdvik will search using the Fontmap provided with
Ghostscript, if necessary. Also, the xdvik distribution comes with a utility called t1mapper to make
these fonts available for xdvi; see the manual page for t1mapper(1) for usage details. This program is
likely to be dropped in the future, however, since it is probably not needed anymore.
SPECIALS (GENERALLY)
Any of the specials used by xdvi may be preceded by the characters ``xdvi:''. Doing so does not change
the behavior of the special under xdvi, but it tells other dvi drivers (such as e.g. dvips) to ignore the
special.
SOURCE SPECIALS
Some TeX implementations or macro packages provide the facility to automatically include so-called
`source specials' into a DVI file. These contain the line number, eventually a column number, and the
filename of the .tex source. This makes it possible to jump from a .dvi file to the corresponding place
in the .tex source and vice versa (also called `inverse search' - jumping from the DVI file to the TeX
file is also known as `reverse search', and jumping from the TeX file to the DVI file as `forward
search').
To be usable with xdvi, source specials in the dvi file must have one of the following formats:
src:line[ ]filename
src:line:col[ ]filename
src:line
src:line:col
src::col
If filename or line are omitted, the most recent values are used. The first source special on each page
must be in one of the first two forms, since defaults are not inherited across pages.
You will need a TeX implementation that provides an appropriate switch (e.g. -src) or a macro package
(such as srcltx.sty or srctex.sty, available from CTAN:macros/latex/contrib/supported/srcltx/) to insert
such source specials into the DVI file.
For reverse search, the combination Ctrl-Mouse 1 will make xdvi open an editor (the value of the -editor
command line option) with the file and the line number of the .tex source. See the description of the
-editor option for more information and example settings.
For forward search, xdvi has a -sourceposition option that makes xdvi jump to the page in the DVI file
corresponding to the given line (or the closest line having a source special) of the specified file and
highlight the found region. See the description of the -sourceposition option for more details.
More information on setting up various editors for use with source specials can be found at:
http://xdvi.sourceforge.net/inverse-search.html
PAPERSIZE SPECIALS
xdvi accepts specials to set the paper size for the document. These specials should be of the form
papersize=[*]width,height
where width and height give the width and height of the paper, respectively. Each of these should appear
in the form of a decimal number followed by any of the two-letter abbreviations for units accepted by TeX
(pt, pc, in, bp, cm, mm, dd, cc, or sp). If an asterisk (*) appears just before the width, then the
measurements refer to the document dimensions (e.g., pt as opposed to truept). This allows a macro
package to vary the page size according to elements of the document; e.g.,
\special{xdvi: papersize=*\number\wd\mybox sp,
\number\ht\mybox sp}
Except for the asterisk, this format is compatible with dvips.
The last papersize special on a page determines the size of that page. If there is no such special on a
given page, the most recent papersize is used, or, if there are no papersize specials on any preceding
page, then the value of the paper resource (or -paper option on the command line) is used. Thus the
paper size may vary for different pages of the dvi file.
If the paper resource (or -paper command-line option) begins with a plus sign (`+'), then all papersize
specials in the dvi file are ignored.
COLOR SPECIALS
The color specials supported by xdvi are the same as those supported by dvips, except that the literal
PostScript color specification (as in the AggiePattern example in the dvips documentation) is not
supported. There are also some restrictions due to the way xdvi's drawing routines are implemented;
e.g. the \colorbox and \fcolorbox macros don't work with xdvi. See the section LIMITATIONS below for
more information on these restrictions. Xdvi supports the same list of named colors as dvips does,
namely:
Apricot, Aquamarine, Bittersweet, Black, Blue, BlueGreen, BlueViolet, BrickRed, Brown, BurntOrange,
CadetBlue, CarnationPink, Cerulean, CornflowerBlue, Cyan, Dandelion, DarkOrchid, Emerald, ForestGreen,
Fuchsia, Goldenrod, Gray, Green, GreenYellow, JungleGreen, Lavender, LimeGreen, Magenta, Mahogany,
Maroon, Melon, MidnightBlue, Mulberry, NavyBlue, OliveGreen, Orange, OrangeRed, Orchid, Peach,
Periwinkle, PineGreen, Plum, ProcessBlue, Purple, RawSienna, Red, RedOrange, RedViolet, Rhodamine,
RoyalBlue, RoyalPurple, RubineRed, Salmon, SeaGreen, Sepia, SkyBlue, SpringGreen, Tan, TealBlue, Thistle,
Turquoise, Violet, VioletRed, White, WildStrawberry, Yellow, YellowGreen, YellowOrange.
Note that these names are case sensitive.
The documentation of the LaTeX color package provides more details on how to use such specials with
LaTeX; see the dvips documentation for a detailed description of the syntax and semantics of the color
specials.
SIGNALS
When xdvi receives a SIGUSR1 signal, it rereads the dvi file.
ENVIRONMENT
Xdvik uses the same environment variables and algorithms for searching for font files as TeX and friends.
See the documentation for the Kpathsea library, kpathsea.dvi, for a detailed description of these.
In addition, xdvik accepts the following variables:
DISPLAY
Specifies which graphics display terminal to use.
KPATHSEA_DEBUG
Trace Kpathsea lookups; set it to -1 (= all bits on) for complete tracing.
EXTENSIONMAPS
A list of files to be searched for mime types entries (as for Acrobat Reader). Earlier entries in
one of these files override later ones. If this variable is not set, the following default path
is used:
$HOME/.mime.types:/etc/mime.types:\
/usr/etc/mime.types:/usr/local/etc/mime.types
MAILCAPS
A list of files to be searched for mailcap entries, as defined by RFC 1343. See this RFC or the
mailcap(4) manual page for a detailed description of the mailcap file format. Currently, only the
following mailcap features are supported:
test=command
The entry is only used if command can be executed via the system() call and if the system()
call returns with value 0 (success). The command string may contain the format string %s,
which will be replaced by the file name.
needsterminal
If this flag is used, the command will be executed in a new xterm window by prepending
``xterm -e '' to the command string.
All other fields in the mailcap entry are ignored by xdvi. Earlier entries in one of these files
override later ones. If the variable is not defined, the following default path is used:
$HOME/.mailcap:/etc/mailcap:/usr/etc/mailcap:\
/usr/local/etc/mailcap
For security reasons, some special characters (i.e.: ( ) ` \ ;) are escaped in the argument before
passing it to system().
BROWSER
Determines the web browser used to open external links (i.e., all URLs that don't start with the
`file:' scheme and are not relative links in the local DVI file), and to open links for which no
viewer has been specified in the mailcap files. The value of this variable is a colon-separated
list of commands. Xdvi will try each of them in sequence until one succeeds (i.e. doesn't
immediately return with status 0). This allows you to specify your favourite browser at the
beginning, and fallback browsers at the end. Every occurrence of %s in the string is replaced by
the target URL; every occurrence of %% is replaced by a single %. If no %s is present, the URL
string is added as an extra argument.
An example setting is:
netscape -raise -remote 'openURL(%s,new-window)':xterm -e lynx %s:xterm -e wget %s:lynx %s:wget %s
See
http://www.catb.org/~esr/BROWSER/
for more details on the BROWSER environment variable.
GS_LIB A colon-separated list of directories to search for Fontmap files, etc., as used for Ghostscript.
It has the same meaning as it does when running Ghostscript. In xdvik, it is used when searching
for font files when the map file does not give a file name for the font (this should be quite
rare). The command gs -h will list the default value that Ghostscript uses. See also the
XDVI_GS_LIB environment variable (below).
XDVI_GS_LIB
This has the same effect as GS_LIB but affects only xdvi. Use this when you want to use a
different value for GS_LIB when running xdvi, but use either the compiled-in default value or some
other value when running Ghostscript. If both GS_LIB and XDVI_GS_LIB are set, then xdvi uses
XDVI_GS_LIB. To use the default value compiled in to xdvi while still retaining the ability to
set GS_LIB for use with Ghostscript, you can set XDVI_GS_LIB to the empty string.
TMPDIR The directory to use for storing temporary files created when uncompressing PostScript files.
XEDITOR
Determines the editor command used for source special `reverse search', if neither the -editor
command-line option nor the .editor resource are specified. See the description of the -editor
command line option for details on the format.
VISUAL Determines an editor to be opened in an xterm window if neither of -editor, .editor, or XEDITOR is
specified.
EDITOR Determines an editor to be opened in an xterm window if neither of -editor, .editor, XEDITOR or
VISUAL is specified.
WWWBROWSER
Obsolete; use BROWSER instead.
LIMITATIONS
xdvi accepts many but not all types of PostScript specials accepted by dvips. For example, it accepts
most specials generated by epsf and psfig. It does not, however, support bop-hook or eop-hook, nor does
it allow PostScript commands to affect the rendering of things that are not PostScript (for example, the
``NEAT'' and rotated ``A'' examples in the dvips manual). These restrictions are due to the design of
xdvi; in all likelihood they will always remain.
LaTeX2e rotation specials are currently not supported.
MetaPost files containing included text are not supported.
Xdvi's color handling doesn't support the \colorbox and \fcolorbox macros; this is not likely to change
in the near future. This also means that e.g. colored tables (as created by the colortbl package) may
render incorrectly: Text in colors different from the default foreground color may not be displayed. When
the page is redrawn (e.g. after using the magnifier), the background color of the cells may overdraw the
text.
FILES
$HOME/.xdvirc
A file that holds all settings that the user changed via the keys, the `Options' and the Xaw
`Modes' menu and the dialogs, as X resources. These resources override the settings in
$HOME/.Xdefaults. This file is ignored if the -q option is used or the noInitFile X resource is
set.
config.xdvi
An optional configuration file for the Type 1 font setup, which specifies dvips-style map files
specific to xdvik. If used, it should be present in the directory determined by the TEXCONFIG
environment variable. Its format is similar to configuration files for dvips, except that it is
only scanned for the names of map files (p and p+ directives).
SEE ALSO
X(1), dvips(1), mktexpk(1), ps2pk(1), gsftopk(1), t1mapper(1), mailcap(4), the Kpathsea documentation,
and the Xdvik home page at http://xdvi.sourceforge.net/.
AUTHORS
Eric Cooper, CMU, did a version for direct output to a QVSS. Modified for X by Bob Scheifler, MIT
Laboratory for Computer Science. Modified for X11 by Mark Eichin, MIT SIPB. Additional enhancements by
many others.
The current maintainer of the original xdvi is Paul Vojta, U.C. Berkeley.
Code for the xdvik variant has been contributed by many people, whose names are scattered across the
source files. Xdvik is hosted on CTAN:dviware/xdvik and on SourceForge; for the most up-to-date
information, please visit:
http://xdvi.sourceforge.net
Please report all bugs to the SourceForge bug tracker:
http://sourceforge.net/tracker/?func=add&group_id=23164&atid=377580