Provided by: ytalk_3.3.0-5_amd64 bug

NAME

       ytalk - A multi-user chat program.

SYNOPSIS

       ytalk [-s] [-Y] [-E] [-i] [-q] [-v] [-h hostname_or_ip] username...

DESCRIPTION

       YTalk 3.3.0

       YTalk is in essence a multi-user chat program.  It works almost exactly like the UNIX talk
       program and even communicates with the same talk daemon(s), but YTalk allows for  multiple
       connections.

       The username field may be formatted in several different ways:
            name          - some user on your machine
            name@host     - some user on a different machine
            name#tty      - some user on a particular terminal
            name#tty@host - some user on a particular tty on a
                            different machine
            name@host#tty - same as "name#tty@host"
            aliasname     - an alias defined in your .ytalkrc

       You can specify multiple user names on the command line, ie:

            ytalk george fred@hissun.edu marc@grumpy.cc

       The -s option starts your YTalk window in a shell.

       The -Y option requires a capital Y or N as an answer to any yes/no question.

       The  -E  option  requires you to press escape once before answering a yes/no question (for
       people who type looking at the keyboard).

       The  -i  option  disables  the  auto-invite  port  (meaning  you  won't   see   "talk   to
       blah@blah.com", but your talk daemon will beep you instead).

       The -q option causes YTalk to prompt you before quitting.

       The -v option prints the program version and exits.

       The -h option specifies the name or address of the local machine; this is useful on multi-
       homed machines,  or  virtual  hosts,  to  specify  which  network  interface  to  use  for
       communication.

       For each user on the command line, YTalk will attempt to connect to the talk daemon on the
       specified user's host and determine if that user has left an invitation for you  to  call.
       If  not,  YTalk  leaves  an  invitation  for  him  and  tells  his  talk daemon to send an
       announcement to his screen.  There is no dedicated YTalk daemon.  Right now, YTalk is able
       to communicate with BOTH existing versions of UNIX talk daemons.  For any particular host,
       YTalk will attempt to communicate with a talk daemon the caller's host also supports.   If
       the  two  hosts  have  no daemon in common, then UNIX talk will not function at all, but a
       connection is possible through (and only through) YTalk.

       Once a connection has been established between two users, they can chat back and forth  to
       their  hearts'  content.   The connection is terminated when one of them hits control-C or
       selects quit off the main menu.

       YTalk is perfectly compatible with UNIX talk and they can even converse  with  each  other
       without  any  problems.   However, many of the features of YTalk can only operate when you
       are connected to a user who is also using YTalk.  For the rest of this document,  it  will
       be assumed that all connected users are using YTalk, unless otherwise stated.

       If you specified more than one user on the YTalk command line, then YTalk will process and
       add each user to the conversation as they respond to your invitation.  As  each  new  user
       enters  the  conversation,  the  screen  is  further  subdivided  into smaller and smaller
       windows, one for each connected user.  Right now, the number of connected users is limited
       by  the  number  of  lines  on your terminal (or window), for each connected user needs at
       least three lines.

       As each new user is added to the conversation, YTalk will transmit information about  that
       user  to  all  other  connected  YTalk users so that their screens will also subdivide and
       incorporate the new user.  If the new user is using UNIX talk, then information about  him
       will NOT be transmitted, for his screen would be unable to accept multiple connections.  I
       have given brief thought to allowing at  least  the  output  of  UNIX  talk  users  to  be
       transmitted  to all connected YTalk users, but I have not written any code to do so.  Note
       that even though UNIX talk cannot handle multiple connections, it is  still  possible  for
       YTalk to handle multiple UNIX "talk" connections.  For example, george (using YTalk) could
       communicate with fred and joe (both using UNIX talk), but fred and joe would be unaware of
       each  other.   The best way to understand the limitations that UNIX "talk" places on YTalk
       is to test various connections between the two and see how things work.

ESCAPE MENU

       Whenever you are using YTalk, you can hit the ESCAPE key to bring up a menu which at  this
       moment has these options:

               a: add a user
               d: delete a user
               k: kill all unconnected
               o: options
               r: rering all
               s: shell
               u: user list
               w: output user to file
               q: quit

       By  choosing  option  "a",  you are given the opportunity to type the name of any user you
       wish to include into the conversation.  Again, YTalk will accept an invitation  from  that
       user if an invitation exists, or will leave an invitation and ring the given user.

       By choosing option "d", you can select the name of a connection to terminate.

       By choosing option "k", you can make YTalk forget all pending (waiting) connections.

       By  choosing  option  "o",  you  can view and/or modify any of the YTalk options.  See the
       OPTIONS section below for a list of YTalk options.

       By choosing option "r", all users that have not yet responded to your talk invitation will
       be re-rung.

       By choosing option "s", you can invoke a shell in your YTalk window.  All other users will
       see what happens in your shell.  YTalk will automatically resize your window down  to  the
       size of the smallest window you are connected to, in order to ensure that all users always
       see the same thing.

       The "u" option displays a list of connected and unconnected users, as well as their window
       sizes and what version of talk software they are running.

       By choosing option "w", you can select any connected user and type the name of a file, and
       all further output from that user will be dumped to the specified file.  The file,  if  it
       exists,  will  be OVERWRITTEN.  By choosing "w" and the same user again, further output to
       the file will be terminated.

       Oh, one other thing:  when user A attempts to ytalk to user  B,  but  user  B  is  already
       ytalking  with  user  C,  user A's YTalk program will realize that user B is already using
       YTalk, and will communicate with user B's YTalk program directly in  order  to  initialize
       the conversation.  User B will see a nice windowed message like:

            Do you wish to talk with user A?

       and  he  will be prompted for a yes/no answer.  This, in my opinion, is much preferable to
       blitting the announcement message and messing up user B's screen. The command-line  option
       "-i" turns this off.

RUNTIME OPTIONS

       When  you  select  Options off of the main menu, you are given the opportunity to edit the
       YTalk options.  The current options are:

            s: turn scrolling [off/on]
            w: turn word-wrap [off/on]
            i: turn auto-import [off/on]
            v: turn auto-invite [off/on]
            r: turn reringing [off/on]
            p: [don't] prompt before rerings
            q: [don't] prompt before quitting

       If scrolling is turned on, then a user's window will scroll when he  reaches  the  bottom,
       instead of wrapping back around to the top.

       If  word-wrap  is turned on, then any word which would overextend the right margin will be
       automatically moved to the next line on your screen.

       If auto-import is turned on, then YTalk will assume that you wish to  talk  to  any  users
       which  connect  to  other YTalk users which are connected to you.  That last sentence does
       make sense; try again.  YTalk will add these users to your session automatically,  without
       asking you for verification.

       If auto-invite is turned on, then YTalk will automatically accept any connection requested
       by another user and add them to your session.  You will not be asked for verification.

       If rering is turned on, then YTalk will re-ring any user who  does  not  respond  to  your
       invitation within 30 seconds.

       If prompt-rering is turned on, then YTalk will ask you before re-ringing a user.

       If prompt-quit is turned on, then YTalk will wait for keyboard input before quitting.

       Any  of  these  options  can be set to your preference in your .ytalkrc file, as described
       below.

YTALK STARTUP FILE

       If your home directory contains a file named ".ytalkrc" then YTalk  will  read  this  file
       while starting up.  All YTalk runtime options, as well as some startup options, can be set
       in this file.

       SETTING BOOLEAN OPTIONS

       Boolean options can be pre-set with the following syntax:

            turn option [off | on]

       where option is one of scrolling , word-wrap  ,  auto-import  ,  auto-invite  ,  rering  ,
       prompt-rering  ,  prompt-quit  , caps , escape-yesno , noinvite , ignorebreak , or beeps .
       Setting these options works just like described above.   For  example,  one  could  enable
       word-wrap with the line:

            turn word-wrap on

       ALIASES

       You  can  setup aliases so you don't have to type the full address of the user you want to
       ring.  There are three types of aliases:

       alias aliasname@ username@
                   Replaces aliasname@host with username@host for every host. The '@' at the  end
                   of username@ is not required.

       alias @aliashost @realhost
                   Replaces  user@aliashost  with  user@realhost  for  every user. The '@' at the
                   beginning of @realhost is not required.

       alias aliasname user@host
                   Replaces aliasname with user@host.

       SELECTING INTERFACES AND VIRTUAL HOSTS

       On machines with multiple IP addresses (multiple interfaces, or virtual  hosts),  you  can
       choose  the  default  address  to  use  for  communication with YTalk, using the localhost
       command in your .ytalkrc file.  The syntax is:

       localhost hostname-or-IP-address

       SETTING RE-ADDRESS MODES

       The purpose of readdressing is to allow YTalk connections  across  point-to-point  network
       gateways  where  the  local machines know themselves by a different address (and typically
       hostname) than the remote machines.  The basic syntax of a readdress command is this:

            readdress from-address to-address domain

       The readdress statement simply makes a claim that the  machine(s)  in  domain  communicate
       with  the machine(s) at from-address by sending a packet to to-address .  Since most users
       have no use for this whatsoever, I'll describe it only briefly.

       THIS IS NOT ROUTING.  For example, my machine at home is connected via PPP to the  network
       at  my  office.   My  machine at home thinks its ethernet address is 192.188.253.1 and its
       hostname is "talisman.com".  The network at my office has the address 192.67.141.0.   When
       I'm  connected  via  PPP,  my  home  machine  is placed into the office network as address
       192.67.141.9 with hostname "talisman.austin.eds.com".

       YTalk needs to know that if it is running on domain 192.67.141.0 and receives packets from
       192.188.253.1  that  it should respond to 192.67.141.9, not 192.188.253.1.  right?  right.
       okay, okay, okay.  I put this line into my .ytalkrc on both ends:

            readdress talisman talisman.austin.eds.com 192.67.141.0

       On my home end, this translates to:

            readdress 192.188.253.1 192.67.141.9 192.67.141.0

       which  tells  my  home  machine  to  advertise  itself  as   "192.67.141.9"   instead   of
       "192.188.253.1"  when  YTalk-ing to machines on the network "192.67.141.0".  On the office
       end, the readdress command translates to:

            readdress 192.67.141.9 192.67.141.9 192.67.141.0

       which the office machines basically ignore.

       Note that, in this case, the problem could also have been solved by telling the home YTalk
       to use the 192.67.141.0 interface, when doing YTalk requests across the PPP link.

FILES

       /usr/local/etc/ytalkrc
           System-wide defaults file.

       ~/.ytalkrc
           User's local configuration file.  This file overrides
           options set in the system ytalkrc file.

CURRENT MAINTAINER

       Andreas Kling
       <keso@impul.se>

ORIGINAL AUTHOR

       Britt Yenne

PAST MAINTAINERS

       Roger Espel Llima
       Jessica Peterson

CONTRIBUTORS

       Special  thanks  to  Carl  Edman for numerous code patches, beta testing, and comments.  I
       think this guy spends as much time on ytalk as I do.

       Special thanks to Tobias Hahn and Geoff W. for beta testing and suggestions.

       Thanks to Sitaram Ramaswamy for the original YTalk manpage.

       Thanks to Magnus Hammerin for Solaris 2.* support.

       Thanks to Thilo Wunderlich for Linux support.

       Thanks to Jonas Yngvesson for aside messages in X.

       Thanks to Andreas Stolcke for fixing the X resource database calls.

       Thanks to Pete Wenzel for fixing the #elif directive.

       Thanks to John Vanderpool, Shih-Chen Huang, Andrew Myers, Duncan  Sinclair,  Evan  McLean,
       Larry Schwimmer, J. Adam Hawkes, and Mark Musone for comments and ideas.

       Thanks to Steve McIntyre for patches and ideas.

       Thanks to Katarina Erkkonen for CVS hosting.

       Thanks to Alexander Rigbo for patches, testing and many good ideas.

BUGS

       Please mail any bugs to the maintainer of this version, at <keso@impul.se>

SEE ALSO

       http://www.impul.se/ytalk/

LICENSE

       This program is free software; you can redistribute it and/or modify it under the terms of
       the GNU General Public License as  published  by  the  Free  Software  Foundation;  either
       version 2 of the License, or (at your option) any later version.

       This  program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
       without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR  PURPOSE.
       See the GNU General Public License for more details.