Provided by: manpages-dev_3.54-1ubuntu1_all 
NAME
shmctl - System V shared memory control
SYNOPSIS
#include <sys/ipc.h>
#include <sys/shm.h>
int shmctl(int shmid, int cmd, struct shmid_ds *buf);
DESCRIPTION
shmctl() performs the control operation specified by cmd on the System V shared memory
segment whose identifier is given in shmid.
The buf argument is a pointer to a shmid_ds structure, defined in <sys/shm.h> as follows:
struct shmid_ds {
struct ipc_perm shm_perm; /* Ownership and permissions */
size_t shm_segsz; /* Size of segment (bytes) */
time_t shm_atime; /* Last attach time */
time_t shm_dtime; /* Last detach time */
time_t shm_ctime; /* Last change time */
pid_t shm_cpid; /* PID of creator */
pid_t shm_lpid; /* PID of last shmat(2)/shmdt(2) */
shmatt_t shm_nattch; /* No. of current attaches */
...
};
The ipc_perm structure is defined as follows (the highlighted fields are settable using
IPC_SET):
struct ipc_perm {
key_t __key; /* Key supplied to shmget(2) */
uid_t uid; /* Effective UID of owner */
gid_t gid; /* Effective GID of owner */
uid_t cuid; /* Effective UID of creator */
gid_t cgid; /* Effective GID of creator */
unsigned short mode; /* Permissions + SHM_DEST and
SHM_LOCKED flags */
unsigned short __seq; /* Sequence number */
};
Valid values for cmd are:
IPC_STAT Copy information from the kernel data structure associated with shmid into the
shmid_ds structure pointed to by buf. The caller must have read permission on
the shared memory segment.
IPC_SET Write the values of some members of the shmid_ds structure pointed to by buf to
the kernel data structure associated with this shared memory segment, updating
also its shm_ctime member. The following fields can be changed: shm_perm.uid,
shm_perm.gid, and (the least significant 9 bits of) shm_perm.mode. The
effective UID of the calling process must match the owner (shm_perm.uid) or
creator (shm_perm.cuid) of the shared memory segment, or the caller must be
privileged.
IPC_RMID Mark the segment to be destroyed. The segment will only actually be destroyed
after the last process detaches it (i.e., when the shm_nattch member of the
associated structure shmid_ds is zero). The caller must be the owner or
creator, or be privileged. If a segment has been marked for destruction, then
the (nonstandard) SHM_DEST flag of the shm_perm.mode field in the associated
data structure retrieved by IPC_STAT will be set.
The caller must ensure that a segment is eventually destroyed; otherwise its
pages that were faulted in will remain in memory or swap.
See also the description of /proc/sys/kernel/shm_rmid_forced in proc(5).
IPC_INFO (Linux-specific)
Returns information about system-wide shared memory limits and parameters in the
structure pointed to by buf. This structure is of type shminfo (thus, a cast is
required), defined in <sys/shm.h> if the _GNU_SOURCE feature test macro is
defined:
struct shminfo {
unsigned long shmmax; /* Maximum segment size */
unsigned long shmmin; /* Minimum segment size;
always 1 */
unsigned long shmmni; /* Maximum number of segments */
unsigned long shmseg; /* Maximum number of segments
that a process can attach;
unused within kernel */
unsigned long shmall; /* Maximum number of pages of
shared memory, system-wide */
};
The shmmni, shmmax, and shmall settings can be changed via /proc files of the
same name; see proc(5) for details.
SHM_INFO (Linux-specific)
Returns a shm_info structure whose fields contain information about system
resources consumed by shared memory. This structure is defined in <sys/shm.h>
if the _GNU_SOURCE feature test macro is defined:
struct shm_info {
int used_ids; /* # of currently existing
segments */
unsigned long shm_tot; /* Total number of shared
memory pages */
unsigned long shm_rss; /* # of resident shared
memory pages */
unsigned long shm_swp; /* # of swapped shared
memory pages */
unsigned long swap_attempts;
/* Unused since Linux 2.4 */
unsigned long swap_successes;
/* Unused since Linux 2.4 */
};
SHM_STAT (Linux-specific)
Returns a shmid_ds structure as for IPC_STAT. However, the shmid argument is
not a segment identifier, but instead an index into the kernel's internal array
that maintains information about all shared memory segments on the system.
The caller can prevent or allow swapping of a shared memory segment with the following cmd
values:
SHM_LOCK (Linux-specific)
Prevent swapping of the shared memory segment. The caller must fault in any
pages that are required to be present after locking is enabled. If a segment
has been locked, then the (nonstandard) SHM_LOCKED flag of the shm_perm.mode
field in the associated data structure retrieved by IPC_STAT will be set.
SHM_UNLOCK (Linux-specific)
Unlock the segment, allowing it to be swapped out.
In kernels before 2.6.10, only a privileged process could employ SHM_LOCK and SHM_UNLOCK.
Since kernel 2.6.10, an unprivileged process can employ these operations if its effective
UID matches the owner or creator UID of the segment, and (for SHM_LOCK) the amount of
memory to be locked falls within the RLIMIT_MEMLOCK resource limit (see setrlimit(2)).
RETURN VALUE
A successful IPC_INFO or SHM_INFO operation returns the index of the highest used entry in
the kernel's internal array recording information about all shared memory segments. (This
information can be used with repeated SHM_STAT operations to obtain information about all
shared memory segments on the system.) A successful SHM_STAT operation returns the
identifier of the shared memory segment whose index was given in shmid. Other operations
return 0 on success.
On error, -1 is returned, and errno is set appropriately.
ERRORS
EACCES IPC_STAT or SHM_STAT is requested and shm_perm.mode does not allow read access for
shmid, and the calling process does not have the CAP_IPC_OWNER capability.
EFAULT The argument cmd has value IPC_SET or IPC_STAT but the address pointed to by buf
isn't accessible.
EIDRM shmid points to a removed identifier.
EINVAL shmid is not a valid identifier, or cmd is not a valid command. Or: for a SHM_STAT
operation, the index value specified in shmid referred to an array slot that is
currently unused.
ENOMEM (In kernels since 2.6.9), SHM_LOCK was specified and the size of the to-be-locked
segment would mean that the total bytes in locked shared memory segments would
exceed the limit for the real user ID of the calling process. This limit is
defined by the RLIMIT_MEMLOCK soft resource limit (see setrlimit(2)).
EOVERFLOW
IPC_STAT is attempted, and the GID or UID value is too large to be stored in the
structure pointed to by buf.
EPERM IPC_SET or IPC_RMID is attempted, and the effective user ID of the calling process
is not that of the creator (found in shm_perm.cuid), or the owner (found in
shm_perm.uid), and the process was not privileged (Linux: did not have the
CAP_SYS_ADMIN capability).
Or (in kernels before 2.6.9), SHM_LOCK or SHM_UNLOCK was specified, but the process
was not privileged (Linux: did not have the CAP_IPC_LOCK capability). (Since Linux
2.6.9, this error can also occur if the RLIMIT_MEMLOCK is 0 and the caller is not
privileged.)
CONFORMING TO
SVr4, POSIX.1-2001.
NOTES
The inclusion of <sys/types.h> and <sys/ipc.h> isn't required on Linux or by any version
of POSIX. However, some old implementations required the inclusion of these header files,
and the SVID also documented their inclusion. Applications intended to be portable to
such old systems may need to include these header files.
The IPC_INFO, SHM_STAT and SHM_INFO operations are used by the ipcs(1) program to provide
information on allocated resources. In the future these may modified or moved to a /proc
filesystem interface.
Linux permits a process to attach (shmat(2)) a shared memory segment that has already been
marked for deletion using shmctl(IPC_RMID). This feature is not available on other UNIX
implementations; portable applications should avoid relying on it.
Various fields in a struct shmid_ds were typed as short under Linux 2.2 and have become
long under Linux 2.4. To take advantage of this, a recompilation under glibc-2.1.91 or
later should suffice. (The kernel distinguishes old and new calls by an IPC_64 flag in
cmd.)
SEE ALSO
mlock(2), setrlimit(2), shmget(2), shmop(2), capabilities(7), svipc(7)
COLOPHON
This page is part of release 3.54 of the Linux man-pages project. A description of the
project, and information about reporting bugs, can be found at
http://www.kernel.org/doc/man-pages/.