Provided by: libauthen-radius-perl_0.24-1_all 
NAME
Authen::Radius - provide simple Radius client facilities
SYNOPSIS
use Authen::Radius;
$r = new Authen::Radius(Host => 'myserver', Secret => 'mysecret');
print "auth result=", $r->check_pwd('myname', 'mypwd'), "\n";
$r = new Authen::Radius(Host => 'myserver', Secret => 'mysecret');
Authen::Radius->load_dictionary();
$r->add_attributes (
{ Name => 'User-Name', Value => 'myname' },
{ Name => 'Password', Value => 'mypwd' },
# RFC 2865 http://www.ietf.org/rfc/rfc2865.txt calls this attribute
# User-Password. Check your local RADIUS dictionary to find
# out which name is used on your system
# { Name => 'User-Password', Value => 'mypwd' },
{ Name => 'h323-return-code', Value => '0' }, # Cisco AV pair
{ Name => 'Digest-Attributes', Value => { Method => 'REGISTER' } }
);
$r->send_packet(ACCESS_REQUEST) and $type = $r->recv_packet();
print "server response type = $type\n";
for $a ($r->get_attributes()) {
print "attr: name=$a->{'Name'} value=$a->{'Value'}\n";
}
DESCRIPTION
The "Authen::Radius" module provides a simple class that allows you to send/receive Radius
requests/responses to/from a Radius server.
CONSTRUCTOR
new ( Host => HOST, Secret => SECRET [, TimeOut => TIMEOUT] [,Service => SERVICE] [, Debug => Bool] [,
LocalAddr => hostname[:port]] [,Rfc3579MessageAuth => Bool] [,NodeList= NodeListArrayRef])
Creates & returns a blessed reference to a Radius object, or undef on failure. Error status may be
retrieved with "Authen::Radius::get_error" (errorcode) or "Authen::Radius::strerror" (verbose error
string).
The default "Service" is "radius", the alternative is "radius-acct". If you do not specify port in
the "Host" as a "hostname:port", then port specified in your /etc/services will be used. If there is
nothing there, and you did not specify port either then default is 1812 for "radius" and 1813 for
"radius-acct".
Optional parameter "Debug" with a Perl "true" value turns on debugging (verbose mode).
Optional parameter "LocalAddr" may contain local IP/host bind address from which RADIUS packets are
sent.
Optional parameter "Rfc3579MessageAuth" with a Perl "true" value turns on generating of Message-
Authenticator for Access-Request (RFC3579, section 3.2).
Optional parameter "NodeList" may contain a Perl reference to an array, containing a list of Radius
Cluster nodes. Each nodes in the list can be specified using a hostname or IP (with an optional port
number), i.e. 'radius1.mytel.com' or 'radius.myhost.com:1812'. Radius Cluster contains a set of
Radius servers, at any given moment of time only one server is considered to be "active" (so requests
are send to this server). How the active node is determined? Initially in addition to the "NodeList"
parameter you may supply the "Host" parameter and specify which server should become the first active
node. If this parameter is absent, or the current active node does not reply anymore, the process of
"discovery" will be performed: a request will be sent to all nodes and the consecutive communication
continues with the node, which will be the first to reply.
METHODS
load_dictionary ( [ DICTIONARY ] )
Loads the definitions in the specified Radius dictionary file (standard Livingston radiusd format).
Tries to load '"/etc/raddb/dictionary"' when no argument is specified, or dies. NOTE: you need to
load valid dictionary if you plan to send RADIUS requests with attributes other than just
"User-Name"/"Password".
check_pwd ( USERNAME, PASSWORD [,NASIPADDRESS] )
Checks with the RADIUS server if the specified "PASSWORD" is valid for user "USERNAME". Unless
"NASIPADDRESS" is specified, the script will attempt to determine it's local IP address (IP address
for the RADIUS socket) and this value will be placed in the NAS-IP-Address attribute. This method is
actually a wrapper for subsequent calls to "clear_attributes", "add_attributes", "send_packet" and
"recv_packet". It returns 1 if the "PASSWORD" is correct, or undef otherwise.
add_attributes ( { Name => NAME, Value => VALUE [, Type => TYPE] [, Vendor => VENDOR] }, ... )
Adds any number of Radius attributes to the current Radius object. Attributes are specified as a list
of anon hashes. They may be "Name"d with their dictionary name (provided a dictionary has been loaded
first), or with their raw Radius attribute-type values. The "Type" pair should be specified when
adding attributes that are not in the dictionary (or when no dictionary was loaded). Values for
"TYPE" can be '"string"', '"integer"', '"ipaddr"' or '"avpair"'.
get_attributes
Returns a list of references to anon hashes with the following key/value pairs : { Name => NAME, Code
=> RAWTYPE, Value => VALUE, RawValue => RAWVALUE, Vendor => VENDOR }. Each hash represents an
attribute in the current object. The "Name" and "Value" pairs will contain values as translated by
the dictionary (if one was loaded). The "Code" and "RawValue" pairs always contain the raw attribute
type & value as received from the server. If some attribute doesn't exist in dictionary or type of
attribute not specified then corresponding "Value" undefined and "Name" set to attribute ID ("Code"
value).
clear_attributes
Clears all attributes for the current object.
send_packet ( REQUEST_TYPE, RETRANSMIT )
Packs up a Radius packet based on the current secret & attributes and sends it to the server with a
Request type of "REQUEST_TYPE". Exported "REQUEST_TYPE" methods are '"ACCESS_REQUEST"',
'"ACCESS_ACCEPT"' , '"ACCESS_REJECT"', '"ACCOUNTING_REQUEST"', '"ACCOUNTING_RESPONSE"',
'"DISCONNECT_REQUEST"' and '"COA_REQUEST"'. Returns the number of bytes sent, or undef on failure.
If the RETRANSMIT parameter is provided and contains a non-zero value, then it is considered that we
are re-sending the request, which was already sent previously. In this case the previous value of
packet identifier is used.
recv_packet ( DETECT_BAD_ID )
Receives a Radius reply packet. Returns the Radius Reply type (see possible values for "REQUEST_TYPE"
in method "send_packet") or undef on failure. Note that failure may be due to a failed recv() or a
bad Radius response authenticator. Use "get_error" to find out.
If the DETECT_BAD_ID parameter is supplied and contains a non-zero value, then calculation of the
packet identifier is performed before authenticator check and EBADID error returned in case when
packet identifier from the response doesn't match to the request. If the DETECT_BAD_ID is not
provided or contains zero value then EBADAUTH returned in such case.
set_timeout ( TIMEOUT )
Sets socket I/O activity timeout. "TIMEOUT" should be specified in floating seconds since the epoch.
get_error
Returns the last "ERRORCODE" for the current object. Errorcodes are one-word strings always beginning
with an '"E"'.
strerror ( [ ERRORCODE ] )
Returns a verbose error string for the last error for the current object, or for the specified
"ERRORCODE".
error_comment
Returns the last error explanation for the current object. Error explanation is generated by system
call.
get_active_node
Returns currently active radius node in standard numbers-and-dots notation with port delimited by
colon.
AUTHOR
Carl Declerck <carl@miskatonic.inbe.net> - original design Alexander Kapitanenko <kapitan at
portaone.com> and Andrew Zhilenko <andrew at portaone.com> - later modifications.
PortaOne Development Team <perl-radius at portaone.com> is the current module's maintainer at CPAN.
perl v5.18.1 2014-01-11 Radius(3pm)