NAME

       Catalyst::Manual::Deployment::Apache::FastCGI - Deploying Catalyst with FastCGI on Apache

   Setup
       1. Install Apache with mod_fastcgi

       mod_fastcgi for Apache is a third-party module, and can be found at
       <http://www.fastcgi.com/>. It is also packaged in many distributions (for example,
       libapache2-mod-fastcgi in Debian). You will also need to install the FCGI module from
       CPAN.

       Important Note! If you experience difficulty properly rendering pages, try disabling
       Apache's mod_deflate (Deflate Module), e.g. 'a2dismod deflate'.

   Apache 1.x, 2.x
       Apache requires the mod_fastcgi module.  The same module supports both Apache 1 and 2.

       There are three ways to run your application under FastCGI on Apache: server, static, and
       dynamic.

       Standalone server mode

           FastCgiExternalServer /tmp/myapp.fcgi -socket /tmp/myapp.socket
           Alias /myapp/ /tmp/myapp.fcgi/

           # Or, run at the root
           Alias / /tmp/myapp.fcgi/

           # Optionally, rewrite the path when accessed without a trailing slash
           RewriteRule ^/myapp$ myapp/ [R]

       The FastCgiExternalServer directive tells Apache that when serving /tmp/myapp to use the
       FastCGI application listening on the socket /tmp/mapp.socket.  Note that /tmp/myapp.fcgi
       MUST NOT exist -- it's a virtual file name.  With some versions of "mod_fastcgi" or
       "mod_fcgid", you can use any name you like, but some require that the virtual filename end
       in ".fcgi".

       It's likely that Apache is not configured to serve files in /tmp, so the Alias directive
       maps the url path /myapp/ to the (virtual) file that runs the FastCGI application. The
       trailing slashes are important as their use will correctly set the PATH_INFO environment
       variable used by Catalyst to determine the request path.  If you would like to be able to
       access your app without a trailing slash (http://server/myapp), you can use the above
       RewriteRule directive.

       Static mode

       The term 'static' is misleading, but in static mode Apache uses its own FastCGI Process
       Manager to start the application processes.  This happens at Apache startup time.  In this
       case you do not run your application's fastcgi.pl script -- that is done by Apache. Apache
       then maps URIs to the FastCGI script to run your application.

           FastCgiServer /path/to/myapp/script/myapp_fastcgi.pl -processes 3
           Alias /myapp/ /path/to/myapp/script/myapp_fastcgi.pl/

       FastCgiServer tells Apache to start three processes of your application at startup.  The
       Alias command maps a path to the FastCGI application. Again, the trailing slashes are
       important.

       Dynamic mode

       In FastCGI dynamic mode, Apache will run your application on demand, typically by
       requesting a file with a specific extension (e.g. .fcgi).  ISPs often use this type of
       setup to provide FastCGI support to many customers.

       In this mode it is often enough to place or link your *_fastcgi.pl script in your cgi-bin
       directory with the extension of .fcgi.  In dynamic mode Apache must be able to run your
       application as a CGI script so ExecCGI must be enabled for the directory.

           AddHandler fastcgi-script .fcgi

       The above tells Apache to run any .fcgi file as a FastCGI application.

       Here is a complete example:

           <VirtualHost *:80>
               ServerName www.myapp.com
               DocumentRoot /path/to/MyApp

               # Allow CGI script to run
               <Directory /path/to/MyApp>
                   Options +ExecCGI
               </Directory>

               # Tell Apache this is a FastCGI application
               <Files myapp_fastcgi.pl>
                   SetHandler fastcgi-script
               </Files>
           </VirtualHost>

       Then a request for /script/myapp_fastcgi.pl will run the application.

       For more information on using FastCGI under Apache, visit
       <http://www.fastcgi.com/mod_fastcgi/docs/mod_fastcgi.html>

       Authorization header with mod_fastcgi or mod_cgi

       By default, mod_fastcgi/mod_cgi do not pass along the Authorization header, so modules
       like "Catalyst::Plugin::Authentication::Credential::HTTP" will not work.  To enable pass-
       through of this header, add the following mod_rewrite directives:

           RewriteCond %{HTTP:Authorization} ^(.+)
           RewriteRule ^(.*)$ $1 [E=HTTP_AUTHORIZATION:%1,PT]

       2. Configure your application

           # Serve static content directly
           DocumentRoot  /var/www/MyApp/root
           Alias /static /var/www/MyApp/root/static

           FastCgiServer /var/www/MyApp/script/myapp_fastcgi.pl -processes 3
           Alias /myapp/ /var/www/MyApp/script/myapp_fastcgi.pl/

           # Or, run at the root
           Alias / /var/www/MyApp/script/myapp_fastcgi.pl/

       The above commands will launch 3 app processes and make the app available at /myapp/

       Standalone server mode

       While not as easy as the previous method, running your app as an external server gives you
       much more flexibility.

       First, launch your app as a standalone server listening on a socket.

           script/myapp_fastcgi.pl -l /tmp/myapp.socket -n 5 -p /tmp/myapp.pid -d

       You can also listen on a TCP port if your web server is not on the same machine.

           script/myapp_fastcgi.pl -l :8080 -n 5 -p /tmp/myapp.pid -d

       You will probably want to write an init script to handle starting/stopping of the app
       using the pid file.

       Now, we simply configure Apache to connect to the running server.

           # 502 is a Bad Gateway error, and will occur if the backend server is down
           # This allows us to display a friendly static page that says "down for
           # maintenance"
           Alias /_errors /var/www/MyApp/root/error-pages
           ErrorDocument 502 /_errors/502.html

           FastCgiExternalServer /tmp/myapp.fcgi -socket /tmp/myapp.socket
           Alias /myapp/ /tmp/myapp.fcgi/

           # Or, run at the root
           Alias / /tmp/myapp.fcgi/

       More Info

       Catalyst::Manual::Deployment::FastCGI.

AUTHORS

       Catalyst Contributors, see Catalyst.pm

COPYRIGHT

       This library is free software. You can redistribute it and/or modify it under the same
       terms as Perl itself.

perl v5.14.2                                201Catalyst::Manual::Deployment::Apache::FastCGI(3pm)