NAME

       Config::Model::models::LCDd::CwLnx - Configuration class LCDd::CwLnx

DESCRIPTION

       Configuration classes used by Config::Model

       generated from LCDd.conf

Elements

   Device
       Select the output device to use Optional. Type uniline. upstream_default: '/dev/lcd'.

   Keypad
       If you have a keypad connected. Keypad layout is currently not configureable from the config
       file.Optional. Type uniline. default: 'yes'.

   Model
       Select the LCD model Optional. Type enum. choice: '12232', '12832', '1602'. upstream_default: '12232'.

   Reboot
       Reinitialize the LCD's BIOS normally you shouldn't need this. Optional. Type boolean. upstream_default:
       'no'.

   Size
       Select the LCD size. Default depends on model: 12232: 20x4 12832: 21x4 1602: 16x2. Optional. Type
       uniline. default: '20x4'.

   Speed
       Set the communication speed Optional. Type enum. choice: '9600', '19200'. upstream_default: '19200'.

   keypad_test_mode
       If you have a non-standard keypad you can associate any keystrings to keys.  There are 6 input keys in
       the CwLnx hardware that generate characters from 'A' to 'F'.

       The following is the built-in default mapping hardcoded in the driver.  You can leave those unchanged if
       you have a standard keypad.  You can change it if you want to report other keystrings or have a non
       standard keypad.  KeyMap_A=Up KeyMap_B=Down KeyMap_C=Left KeyMap_D=Right KeyMap_E=Enter KeyMap_F=Escape
       keypad_test_mode permits one to test keypad assignment Default value is no. Optional. Type uniline.
       upstream_default: 'yes'.

SEE ALSO

       •   cme

perl v5.18.2                                       2014-02-19             Config::Model::...ls::LCDd::CwLnx(3pm)