Provided by: libconfig-gitlike-perl_1.12-1_all 
NAME
Config::GitLike - git-compatible config file parsing
SYNOPSIS
This module parses git-style config files, which look like this:
[core]
repositoryformatversion = 0
filemode = true
bare = false
logallrefupdates = true
[remote "origin"]
url = spang.cc:/srv/git/home.git
fetch = +refs/heads/*:refs/remotes/origin/*
[another-section "subsection"]
key = test
key = multiple values are OK
emptyvalue =
novalue
Code that uses this config module might look like:
use Config::GitLike;
# just load a specific file
my $data = Config::GitLike->load_file("~/.fooconf");
# or use the object interface to load /etc/config, ~/.config, and
# `pwd`/.config
my $c = Config::GitLike->new(confname => 'config');
$c->get( key => 'section.name' );
# make the return value a Perl true/false value
$c->get( key => 'core.filemode', as => 'bool' );
# replace the old value
$c->set(
key => 'section.name',
value => 'val1',
filename => '/home/user/.config',
);
# make this key have multiple values rather than replacing the
# old value
$c->set(
key => 'section.name',
value => 'val2',
filename => '/home/user/.config',
multiple => 1,
);
# replace all occurrences of the old value for section.name with a new one
$c->set(
key => 'section.name',
value => 'val3',
filename => '/home/user/.config',
multiple => 1,
replace_all => 1,
);
# make sure to reload the config files before reading if you've set
# any variables!
$c->load;
# get only the value of 'section.name' that matches '2'
$c->get( key => 'section.name', filter => '2' );
$c->get_all( key => 'section.name' );
# prefixing a search regexp with a ! negates it
$c->get_regexp( key => '!na' );
$c->rename_section(
from => 'section',
to => 'new-section',
filename => '/home/user/.config'
);
$c->remove_section(
section => 'section',
filename => '/home/user/.config'
);
# unsets all instances of the given key
$c->set( key => 'section.name', filename => '/home/user/.config' );
my %config_vals = $config->dump;
# string representation of config data
my $str = $config->dump;
# prints rather than returning
$config->dump;
DESCRIPTION
This module handles interaction with configuration files of the style used by the version
control system Git. It can both parse and modify these files, as well as create entirely
new ones.
You only need to know a few things about the configuration format in order to use this
module. First, a configuration file is made up of key/value pairs. Every key must be
contained in a section. Sections can have subsections, but they don't have to. For the
purposes of setting and getting configuration variables, we join the section name,
subsection name, and variable name together with dots to get a key name that looks like
"section.subsection.variable". These are the strings that you'll be passing in to "key"
arguments.
Configuration files inherit from each other. By default, "Config::GitLike" loads data from
a system-wide configuration file, a per-user configuration file, and a per-directory
configuration file, but by subclassing and overriding methods you can obtain any
combination of configuration files. By default, configuration files that don't exist are
just skipped.
See <http://www.kernel.org/pub/software/scm/git/docs/git-config.html#_configuration_file>
for details on the syntax of git configuration files. We won't waste pixels on the nitty
gritty here.
While the behavior of a couple of this module's methods differ slightly from the "git
config" equivalents, this module can read any config file written by git. The converse is
usually true, but only if you don't take advantage of this module's increased
permissiveness when it comes to key names. (See "DIFFERENCES FROM GIT-CONFIG" for
details.)
This is an object-oriented module using Moo. All subroutines are object method calls.
A few methods have parameters that are always used for the same purpose:
Filenames
All methods that change things in a configuration file require a filename to write to, via
the "filename" parameter. Since a "Config::GitLike" object can be working with multiple
config files that inherit from each other, we don't try to figure out which one to write
to automatically and let you specify instead.
Casting
All get and set methods can make sure the values they're returning or setting are valid
values of a certain type: "bool", "int", "num", or "bool-or-int" (or at least as close as
Perl can get to having these types). Do this by passing one of these types in via the "as"
parameter. The set method, if told to write bools, will always write "true" or "false"
(not anything else that "cast" considers a valid bool).
Methods that are told to cast values will throw exceptions if the values they're trying to
cast aren't valid values of the given type.
See the "cast" method documentation for more on what is considered valid for each type.
Filtering
All get and set methods can filter what values they return via their "filter" parameter,
which is expected to be a string that is a valid regex. If you want to filter items OUT
instead of IN, you can prefix your regex with a ! and that will do the trick.
Now, on the the methods!
MAIN METHODS
There are the methods you're likely to use the most.
new( confname => 'config', encoding => 'UTF-8' )
Create a new configuration object with the base config name "confname". If you are
interested simply in loading one specific file, and not in automatically loading a global
file, a per-user file, and a per-directory file, see "load_file", below.
"confname" is used to construct the filenames that will be loaded; by default, these are
"/etc/confname" (global configuration file), "~/.confname" (user configuration file), and
"<Cwd"/.confname> (directory configuration file).
You can override these defaults by subclassing "Config::GitLike" and overriding the
methods "global_file", "user_file", and "dir_file". (See "METHODS YOU MAY WISH TO
OVERRIDE" for details.)
If you wish to enforce only being able to read/write config files that git can read or
write, pass in "compatible => 1" to this constructor. The default rules for some
components of the config file are more permissive than git's (see "DIFFERENCES FROM GIT-
CONFIG").
If you know that your Git config files are encoded with a known character encoding, pass
in "encoding => $encoding" to specify the name of the encoding. Config::GitLike will then
properly serialize and deserialize the files with that encoding. Note that configutation
files written with "git config" are usually, but are not required to be, in UTF-8.
confname
The configuration filename that you passed in when you created the "Config::GitLike"
object. You can change it if you want by passing in a new name (and then reloading via
"load").
load
This method is usually called implicitly on the first "get", "get_all", "get_regex", or
"dump" call used, and is only necessary if you want to explicitly reload the data.
Load the global, local, and directory configuration file with the filename "confname"(if
they exist). Configuration variables loaded later override those loaded earlier, so
variables from the directory configuration file have the highest precedence.
Pass in an optional path, and it will be passed on to "load_dirs" (which loads the
directory configuration file(s)).
Returns a hash copy of all loaded configuration data stored in the module after the files
have been loaded, or a hashref to this hash in scalar context.
config_files
An array reference containing the absolute filenames of all config files that are
currently loaded, in the order they were loaded.
get
Parameters:
key => 'sect.subsect.key'
as => 'int'
human => 1
filter => '!foo'
Return the config value associated with "key" cast as an "as".
The "key" option is required (will return undef if unspecified); the "as" amd "human"
options are not (see cast for their meaning). Sections and subsections are specified in
the key by separating them from the key name with a "." character. Sections, subsections,
and keys may all be quoted (double or single quotes).
If "key" doesn't exist in the config, or has no values which match the filter, undef is
returned. Dies with the exception "Multiple values" if the given key has more than one
value associated with it which match the filter. (Use "get_all" to retrieve multiple
values.)
Calls "load" if it hasn't been done already. Note that if you've run any "set" calls to
the loaded configuration files since the last time they were loaded, you MUST call "load"
again before getting, or the returned configuration data may not match the configuration
variables on-disk.
get_all
Parameters:
key => 'section.sub'
as => 'int'
human => 1
filter => 'regex'
Like "get" but does not fail if the number of values for the key is not exactly one.
Returns a list of values (or an arrayref in scalar context).
get_regexp
Parameters:
key => 'regex'
as => 'bool'
human => 1
filter => 'regex'
Similar to "get_all" but searches for values based on a key regex.
Returns a hash of name/value pairs (or a hashref in scalar context).
dump
In scalar context, return a string containing all configuration data, sorted in ASCII
order, in the form:
section.key=value
section2.key=value
If called in void context, this string is printed instead.
In list context, returns a hash containing all the configuration data.
set
Parameters:
key => 'section.name'
value => 'bar'
filename => File::Spec->catfile(qw/home user/, '.'.$config->confname)
filter => 'regex'
as => 'bool'
multiple => 1
replace_all => 1
Set the key "foo" in the configuration section "section" to the value "bar" in the given
filename.
Replace "key"'s value if "key" already exists.
To unset a key, pass in "key" but not "value".
Returns true on success.
If you need to have a . character in your variable name, you can surround the name with
quotes (single or double): "key => 'section."foo.bar.com"'" Don't do this unless you
really have to.
multiple values
By default, set will replace the old value rather than giving a key multiple values. To
override this, pass in "multiple => 1". If you want to replace all instances of a
multiple-valued key with a new value, you need to pass in "replace_all => 1" as well.
group_set( $filename, $array_ref )
Same as "set", but set a group of variables at the same time without writing to disk
separately for each.
$array_ref contains a list of hash references which are essentially hashes of arguments to
"set", excluding the $filename argument since that is specified separately and the same
file is used for all variables to be set at once.
rename_section
Parameters:
from => 'name.subname'
to => 'new.subname'
filename => '/file/to/edit'
Rename the section existing in "filename" given by "from" to the section given by "to".
Throws an exception "No such section" if the section in "from" doesn't exist in
"filename".
If no value is given for "to", the section is removed instead of renamed.
Returns true on success, false if "filename" didn't exist and thus the rename did nothing.
remove_section
Parameters:
section => 'section.subsection'
filename => '/file/to/edit'
Just a convenience wrapper around "rename_section" for readability's sake. Removes the
given section (which you can do by renaming to nothing as well).
add_comment
Parameters:
comment => "Begin editing here\n and then stop",
filename => '/file/to/edit'
indented => 1,
semicolon => 0,
Add a comment to the specified configuration file. The "comment" and "filename" parameters
are required. Comments will be added to the file with "# " at the begnning of each line of
the comment. Pass a true value to "semicolon" if you'd rather they start with "; ". If
your comments are indented with leading white space, and you want that white space to
appear in front of the comment character, rather than after, pass a true value to
"indented".
cascade( $bool )
Gets or sets if only the deepest configuration file in a directory tree is loaded, or if
all of them are loaded, shallowest to deepest. Alternately, "cascade => 1" can be passed
to "new".
origins
Returns a hash mapping each config key with the file it was loaded from.
METHODS YOU MAY WISH TO OVERRIDE
If your application's configuration layout is different from the default, e.g. if its
home directory config files are in a directory within the home directory (like
"~/.git/config") instead of just dot-prefixed, override these methods to return the right
directory names. For fancier things like altering precedence, you'll need to override
"load" as well.
dir_file
Return a string containing the path to a configuration file with the name "confname" in a
directory. The directory isn't specified here.
global_file
Return the string "/etc/confname", the absolute name of the system-wide configuration file
with name "confname".
user_file
Return a string containing the path to a configuration file in the current user's home
directory with filename "confname".
load_dirs
Parameters:
'/path/to/look/in/'
Load the configuration file with the filename "dir_file" in the current working directory
into the memory or, if there is no config matching "dir_file" in the current working
directory, walk up the directory tree until one is found. (No error is thrown if none is
found.) If an optional path is passed in, that directory will be used as the base
directory instead of the working directory.
You'll want to use "load_file" to load config files from your overridden version of this
subroutine.
Returns nothing of note.
OTHER METHODS
These are mostly used internally in other methods, but could be useful anyway.
load_global
If a global configuration file with the absolute name given by "global_file" exists, load
its configuration variables into memory.
Returns the current contents of all the loaded configuration variables after the file has
been loaded, or undef if no global config file is found.
load_user
If a configuration file with the absolute name given by "user_file" exists, load its
config variables into memory.
Returns the current contents of all the loaded configuration variables after the file has
been loaded, or undef if no user config file is found.
load_file( $filename )
Takes a string containing the path to a file, opens it if it exists, loads its config
variables into memory, and returns the currently loaded config variables (a hashref).
This method can also be called as a class method, which will die if the file cannot be
read. If called as an instance method, returns undef on failure.
parse_content
Parameters:
content => 'str'
callback => sub {}
error => sub {}
Parses the given content and runs callbacks as it finds valid information.
Returns undef on success and "error($content)" (the original content) on failure.
"callback" is called like:
callback(section => $str, offset => $num, length => $num, name => $str, value => $str)
"name" and "value" may be omitted if the callback is not being called on a key/value pair,
or if it is being called on a key with no value.
"error" is called like:
error( content => $content, offset => $offset )
Where "offset" is the point in the content where the parse error occurred.
If you need to use this method, you might be interested in "error_callback" as well.
error_callback
Parameters:
content => 'str'
offset => 45
filename => '/foo/bar/.baz'
Made especially for passing to "parse_content", passed through the "error" parameter like
this:
error => sub {
error_callback( @_, filename => '/file/you/were/parsing' )
}
It's used internally wherever "parse_content" is used and will throw an exception with a
useful message detailing the line number, position on the line, and contents of the bad
line; if you find the need to use "parse_content" elsewhere, you may find it useful as
well.
set_multiple( $name )
Mark the key string $name as containing multiple values.
Returns nothing.
is_multiple( $name )
Return a true value if the key string $name contains multiple values; false otherwise.
define
Parameters:
section => 'str'
name => 'str'
value => 'str'
Given a section, a key name, and a valueX store this information in memory in the config
object.
Returns the value that was just defined on success, or undef if no name and section were
given and thus the key cannot be defined.
cast
Parameters:
value => 'foo'
as => 'int'
human => 1
Return "value" cast into the type specified by "as".
Valid values for "as" are "bool", "int", "num", or "bool-or-num". For "bool", "true",
"yes", "on", 1, and undef are translated into a true value (for Perl); anything else is
false. Specifying a true value for the "human" argument will get you a human-readable
'true' or 'false' rather than a value that plays along with Perl's definition of
truthiness (0 or 1).
For "int"s and "num"s, if "value" ends in "k", "m", or "g", it will be multiplied by 1024,
1048576, and 1073741824, respectively, before being returned. "int"s are truncated after
being multiplied, if they have a decimal portion.
"bool-or-int", as you might have guessed, gives you either a bool or an int depending on
which one applies.
If "as" is unspecified, "value" is returned unchanged.
format_section
Parameters:
section => 'section.subsection'
base => 1
Return a string containing the section/subsection header, formatted as it should appear in
a config file. If "bare" is true, the returned value is not followed be a newline.
format_definition
Parameters:
key => 'str'
value => 'str'
bare => 1
Return a string containing the key/value pair as they should be printed in the config
file. If "bare" is true, the returned value is not tab-indented nor followed by a newline.
canonical_case( $name )
Given a full key name, returns the canonical name of the key; this is the key with the
section and name lower-cased; the subsection is left as-is.
original_key( $name )
Given a full key name, returns the key as it was last loaded from the file, retaining what
ever upper/lower case was used. Note that for multiple-valued keys, this returns an array
reference of key names, as each definition may have been provided in a different choice of
case.
DIFFERENCES FROM GIT-CONFIG
This module does the following things differently from git-config:
We are much more permissive about valid key names and section names. For variables,
instead of limiting variable names to alphanumeric characters and -, we allow any
characters except for = and newlines, including spaces as long as they are not leading or
trailing, and . as long as the key name is quoted. For sections, any characters but
whitespace, [], and " are allowed. You can enforce reading/writing only git-compatible
variable names and section headers by passing "compatible => 1" to the constructor.
When replacing variable values and renaming sections, we merely use a substring
replacement rather than writing out new lines formatted in the default manner for new
lines. Git's replacement/renaming (as of 1.6.3.2) is currently buggy and loses trailing
comments and variables that are defined on the same line as a section being renamed. Our
method preserves original formatting and surrounding information.
We also allow the 'num' type for casting, since in many cases we might want to be more
lenient on numbers.
We truncate decimal numbers that are cast to "int"s, whereas Git just rejects them.
We don't support NUL-terminating output (the --null flag to git-config). Who needs it?
BUGS
If you find any bugs in this module, report them at:
http://rt.cpan.org/
Include the version of the module you're using and any relevant problematic configuration
files or code snippets.
SEE ALSO
<http://www.kernel.org/pub/software/scm/git/docs/git-config.html#_configuration_file>,
Config::GitLike::Git, <http://syncwith.us/> ("Config::GitLike" is used in Prophet/SD and
provides a working example)
LICENSE
This program is free software; you may modify and/or redistribute it under the same terms
as Perl itself.
COPYRIGHT
Copyright 2010 Best Practical Solutions, LLC
AUTHORS
Alex Vandiver <alexmv@bestpractical.com>, Christine Spang <spang@bestpractical.com>
POD ERRORS
Hey! The above document had some coding errors, which are explained below:
Around line 1726:
Non-ASCII character seen before =encoding in 'valueX'. Assuming UTF-8