NAME

       Cyrus::IMAP::Shell - Perl version of cyradm

SYNOPSIS

         $ cyradm [--user authid] [--authz authzid] [--[no]rc] [--systemrc file] [--userrc file] \
         > [--port n] [--auth mechanism] [--server] server

       but possibly

         $ perl -MCyrus::IMAP::Shell -e 'run("myscript")'

       or even (not recommended)

         use Cyrus::IMAP::Admin::Shell;

         run('myscriptname');

DESCRIPTION

       This module implements cyradm in Perl.  It is a shell around Cyrus::IMAP::Admin.  Commands
       are provided in both Tcl-compatible forms and GNU-style long option forms.

COMMANDS

       "authenticate" ["--minssf" N] ["--maxssf" N] ["--mechanisms" list] [user]
       "auth" ["--minssf" N] ["--maxssf" N] ["--mechanisms" list] [user]
       "login" ["--minssf" N] ["--maxssf" N] ["--mechanisms" list] [user]
           Authenticate to server.  You must already be connected to a server and Cyrus imapd
           will refuse to allow you to re-authenticate once you have authenticated once.

       "chdir" directory
       "cd" directory
           Change directory.  A "pwd" builtin is not provided, but the default command action
           will run "pwd" from a shell if invoked.

       "createmailbox" ["--partition" partition] mailbox
       "createmailbox" mailbox partition
       "create" ["--partition" partition] mailbox
       "create" mailbox partition
       "cm" ["--partition" partition] mailbox
       "cm" mailbox partition
           Create a mailbox on the default or a specified partition.  Both old-style and getopt-
           style usages are accepted (combining them will produce an error).

       "deleteaclmailbox" mailbox id [...]
       "deleteacl" mailbox id [...]
       "dam" mailbox id [...]
           Remove ACLs from the specified mailbox.

       "deletemailbox" mailbox
       "delete" mailbox
       "dm" mailbox
           Delete the specified mailbox.

           Administrators do not have implicit delete rights on mailboxes.  Use the setaclmailbox
           command to grant the "k" permission to your principal if you need to delete a mailbox
           you do not own.

           Note that the online help admits to an optional host argument.  This argument is not
           currently used, and will be rejected with an error if specified; it is reserved for
           IMSP.

       "disconnect"
       "disc"
           Disconnect from the current server.  The prompt will revert to "cyradm>".

       "exit" [number]
       "quit" [number]
           Exit cyradm, optionally with a specific exit status; the exit status of the last
           command will be used if one is not specified.

       help [command]
       ? [command]
           Show help for "command" or all commands.

       "info" [mailbox]
           Display the mailbox/server metadata.

       listaclmailbox mailbox
       listacl mailbox
       lam mailbox
           List ACLs on the specified mailbox.

       "listmailbox" ["--subscribed"] [pattern [reference]]
       "list" ["--subscribed"] [pattern [reference]]
       "lm" ["--subscribed"] [pattern [reference]]
           List all, or all subscribed, mailboxes matching the specified pattern.  The pattern
           may have embedded wildcards '*' or '%', which match anything or anything except the
           separator character, respectively.

           Mailboxes returned will be relative to the specified reference if one is specified.
           This allows a mailbox list to be limited to a particular hierarchy.

           In some cases when the '%' wildcard is used to end a pattern, it may match an entry
           which is not a mailbox but which contains other mailboxes.  In this case, the entry
           will be parenthesized to indicate that it is a root for other mailboxes, as opposed to
           a mailbox itself.

       "listquota" root
       "lq" root
           List quotas on specified root.  If the specified mailbox path does not have a quota
           assigned, an error will be raised; see listquotaroot for a way to find the quota root
           for a mailbox.

       "listquotaroot" mailbox
       "lqm" mailbox
       "lqr" mailbox?
           show quota roots and quotas for mailbox

       "mboxconfig" mailbox attribute value
       "mboxcfg" mailbox attribute value
           Set mailbox metadata.  A value of "none" will remove the attribute.  The currently
           supported attributes are:

           "comment"
               Sets a comment or description associated with the mailbox.

           "expire"
               Sets the number of days after which messages will be expired from the mailbox.

           "news2mail"
               Sets an email address to which messages injected into the server via NNTP will be
               sent.

           "sharedseen"
               Enables the use of a shared \Seen flag on messages rather than a per-user \Seen
               flag.  The 's' right in the mailbox ACL still controls whether a user can set the
               shared \Seen flag.

           "sieve"
               Indicates the name of the global sieve script that should be run when a message is
               delivered to the shared mailbox (not used for personal mailboxes).

           "squat"
               Indicates that the mailbox should have a squat index created for it.

       "renamemailbox" ["--partition" partition] oldname newname
       "rename" ["--partition" partition] oldname newname
       "renm" ["--partition" partition] oldname newname
       "renamemailbox" oldname newname [partition]
       "rename" oldname newname [partition]
       "renm" oldname newname [partition]
           Rename the specified mailbox, optionally moving it to a different partition.  Both
           old-style and getopt-style usages are accepted; combining them will produce an error.

       server [--noauthenticate] [server]
       connect [--noauthenticate] [server]
       servername [--noauthenticate] [server]
           With no arguments, show the current server.  With an argument, connect to that server.
           It will prompt for automatic login unless the "--noauthenticate" option is specified.
           (This may change; in particular, either automatic authentication will be removed or
           all "authenticate" options will be added.)

           When connected to a server, cyradm's prompt changes from "cyradm>" to "servername>",
           where servername is the fully qualified domain name of the connected server.

       "setaclmailbox" mailbox id rights [id rights ...]
       "setacl" mailbox id rights [id rights ...]
       "sam" mailbox id rights [id rights ...]
           Set ACLs on a mailbox.  The ACL may be one of the special strings "none", "read"
           ("lrs"), "post" ("lrsp"), "append" ("lrsip"), "write" ("lrswipkxte"), "delete"
           ("lrxte"), or "all" ("lrswipkxte"), or any combinations of the ACL codes:

           l   Lookup (mailbox is visible to LIST/LSUB, SUBSCRIBE mailbox)

           r   Read (SELECT/EXAMINE the mailbox, perform STATUS)

           s   Seen (set/clear \SEEN flag via STORE, also set \SEEN flag during
                   APPEND/COPY/FETCH BODY[...])

           w   Write flags other than \SEEN and \DELETED

           i   Insert (APPEND, COPY destination)

           p   Post (send mail to mailbox)

           k   Create mailbox (CREATE new sub-mailboxes, parent for new mailbox in RENAME)

           x   Delete mailbox (DELETE mailbox, old mailbox name in RENAME)

           t   Delete messages (set/clear \DELETED flag via STORE, also set \DELETED
                   flag during APPEND/COPY)

           e   Perform EXPUNGE and expunge as part of CLOSE

           a   Administer (SETACL/DELETEACL/GETACL/LISTRIGHTS)

       "setinfo" attribute value
           Set server metadata.  A value of "none" will remove the attribute.  The currently
           supported attributes are:

           "motd"
               Sets a "message of the day".  The message gets displayed as an ALERT upon
               connection.

           "comment"
               Sets a comment or description associated with the server.

           "admin"
               Sets the administrator email address for the server.

           "shutdown"
               Sets a shutdown message.  The message gets displayed as an ALERT and all users are
               disconnected from the server (subsequent logins are disallowed).

           "expire"
               Sets the number of days after which messages will be expired from the server
               (unless overridden by a mailbox annotation).

           "squat"
               Indicates that all mailboxes should have a squat indexes created for them (unless
               overridden by a mailbox annotation).

       "setquota" root resource value [resource value ...]
       "sq" root resource value [resource value ...]
           Set a quota on the specified root, which may or may not be an actual mailbox.  The
           only resource understood by Cyrus is "STORAGE".  The units are as defined in RFC 2087,
           groups of 1024 octets (i.e. Kilobytes).  The value may be the special string "none"
           which will remove the quota.

       "version"
       "ver"
           Display the version info of the current server.

       "xfermailbox" ["--partition" partition] mailbox server
       "xfer" ["--partition" partition] mailbox server
       "xfermailbox" mailbox server [partition]
       "xfer" mailbox server [partition]
           Transfer (relocate) the specified mailbox to a different server.  Both old-style and
           getopt-style usages are accepted; combining them will produce an error.

NOTES

       GNU-style long options must be given in their entirety; Tcl-style options may be
       abbreviated.

       Tcl-style options are provided as a compatibility feature.  They will probably go away in
       the future.

       Multiple commands can be given on a line, separated by ';' characters.

       All commands set an exit status, which at present is not useful.

       Unknown commands are passed to a subshell for execution.

       The Tcl version of cyradm is used for scripting as well as interactively.  While this is
       possible to a limited extent by use of the "run" method, scripting would normally be done
       with "Cyrus::IMAP::Admin", which is far more flexible than either interactive "cyradm" or
       the Tcl scripting mechanism for Cyrus.

       cyradm understands /bin/sh-style redirection:  any command can have its standard or error
       output redirected, with all sh-style redirections (except "<>") supported.  It does not
       currently understand pipes or backgrounding.

       If the "Term::Readline::Perl" or "Term::Readline::GNU" modules are available, cyradm will
       use it.

       An alias facility is implemented internally, but no access is currently provided to it.
       This will change, if only to allow some of the predefined aliases to be removed if they
       conflict with useful shell commands.

AUTHOR

       Brandon S. Allbery, allbery@ece.cmu.edu

SEE ALSO

       Cyrus::IMAP::Admin Term::ReadLine sh(1), perl(1), imapd(8).