Provided by: libdata-streamdeserializer-perl_0.06-1build4_amd64 
NAME
Data::StreamDeserializer - non-blocking deserializer.
SYNOPSIS
my $sr = new Data::StreamDeserializer
data => $very_big_dump;
... somewhere
unless($sr->next) {
# deserialization hasn't been done yet
}
...
if ($sr->next) {
# deserialization has been done
...
if ($sr->is_error) {
printf "%s\n", $sr->error;
printf "Unparsed string tail: %s\n", $sr->tail;
}
my $result = $sr->result; # first deserialized object
my $result = $sr->result(first); # the same
my $results = $sr->result('all'); # all deserialized objects
# (ARRAYREF)
}
# stream deserializer
$sr = new Data::StreamDeserializer;
while(defined (my $block = read_next_data_block)) {
$sr->next($block);
...
}
$sr->next(undef); # eof signal
until ($sr->next) {
... do something
}
# all data were parsed
DESCRIPTION
Sometimes You need to deserialize a lot of data. If You use 'eval' (or Safe->reval, etc)
it can take You too much time. If Your code is executed in event machine it can be
inadmissible. So using the module You can deserialize Your stream progressively and do
something else between deserialization itearions.
Recognized statements
HASHES
{ something }
ARRAYS
[ something ]
REFS
\ something
\[ ARRAY ]
\{ HASH }
Regexps
qr{something}
SCALARS
"something"
'something'
q{something}
qq{something}
METHODS
new
Creates new deserializer. It can receive a few named arguments:
block_size
The size of block which will be serialized in each 'next' cycle. Default value is 512
bytes.
data
If You know (have) all data to deserialize before constructing the object, You can use
this argument.
NOTE: You must not use the function part or next with arguments if You used this argument.
block_size
Set/get the same field.
part
Append a part of input data to serialize. If there is no argument (or undef), deserializer
will know that there will be no data in the future.
next
Processes to parse next block_size bytes. Returns TRUE if an error was detected or all
input datas were parsed.
next_object
The same as next but returns true after new object is found. Drop previous results.
For example You have the string:
$str = "1, 2, [ 0, 1 ], { 'a' => 'b' }";
You can extract objects:
my $dsr = new Data::StreamDeserializer data => $str;
1 until $dsr->next_object;
my $first = $dsr->result; # scalar: 1
1 until $dsr->next_object;
my $second = $dsr->result; # scalar: 2
1 until $dsr->next_object;
my $third = $dsr->result; # arrayref: [ 0, 1 ]
1 until $dsr->next_object;
my $third = $dsr->result; # hashref: { 'a' => 'b' }
skip_divider
If You have a string:
Object Object Object
(there are no dividers between objects), You can call skip_divider after fetching the next
object.
Example:
$str = "1 2 [ 0, 1 ]{ 'a' => 'b' }";
my $dsr = new Data::StreamDeserializer data => $str;
1 until $dsr->next_object;
my $first = $dsr->result; # scalar: 1
$dsr->skip_divider;
1 until $dsr->next_object;
my $second = $dsr->result; # scalar: 2
$dsr->skip_divider;
1 until $dsr->next_object;
my $third = $dsr->result; # arrayref: [ 0, 1 ]
Important: You can't skip dividers inside nested object. The function will croak if You
call it in the point that isn't between objects.
is_error
Returns TRUE if an error was detected.
error
Returns error string.
tail
Returns unparsed data.
result
Returns result of parsing. By default the function returns only the first parsed object.
You can call the function with argument 'all' to get all parsed objects. In this case the
function will receive ARRAYREF.
is_done
Returns TRUE if all input data were processed or an error was found. If You didn't call
part without arguments, and didn't call next or next_object with undef the function could
return TRUE only if an error occured.
PRIVATE METHODS
_push_error
Pushes error into deserializer's error stack.
SEE ALSO
DATA::StreamSerializer
BENCHMARKS
This module is almost fully written using XS/C language. So it works a bit faster or
slowly than CORE::eval.
You can try a few scripts in benchmark/ directory. There are a few test arrays in this
directory.
Here are a few test results of my system.
Array which contains 100 hashes:
It works faster than eval:
$ perl benchmark/ds_vs_eval.pl -n 1000 -b 512 benchmark/tests/01_100x10
38296 bytes were read
First deserializing by eval... done
First deserializing by Data::DeSerializer... done
Check if deserialized objects are same... done
Starting 1000 iterations for eval... done (3.755 seconds)
Starting 1000 iterations for Data::StreamDeserializer... done (3.059 seconds)
Eval statistic:
1000 iterations were done
maximum deserialization time: 0.0041 seconds
minimum deserialization time: 0.0035 seconds
average deserialization time: 0.0036 seconds
StreamDeserializer statistic:
1000 iterations were done
75000 SUBiterations were done
512 bytes in one block in one iteration
maximum deserialization time: 0.0045 seconds
minimum deserialization time: 0.0028 seconds
average deserialization time: 0.0029 seconds
average subiteration time: 0.00004 seconds
Array which contains 1000 hashes:
It works slowly than eval:
$ perl benchmark/ds_vs_eval.pl -n 1000 -b 512 benchmark/tests/02_1000x10
355623 bytes were read
First deserializing by eval... done
First deserializing by Data::DeSerializer... done
Check if deserialized objects are same... done
Starting 1000 iterations for eval... done (43.920 seconds)
Starting 1000 iterations for Data::StreamDeserializer... done (71.668 seconds)
Eval statistic:
1000 iterations were done
maximum deserialization time: 0.0490 seconds
minimum deserialization time: 0.0416 seconds
average deserialization time: 0.0426 seconds
StreamDeserializer statistic:
1000 iterations were done
689000 SUBiterations were done
512 bytes in one block in one iteration
maximum deserialization time: 0.0773 seconds
minimum deserialization time: 0.0656 seconds
average deserialization time: 0.0690 seconds
average subiteration time: 0.00010 seconds
You can see, that one block is parsed in a very short time period. So You can increase
block_size value to reduce total parsing time.
If block_size is equal string size the module works two times faster than eval:
$ perl benchmark/ds_vs_eval.pl -n 1000 -b 355623 benchmark/tests/02_1000x10
355623 bytes were read
First deserializing by eval... done
First deserializing by Data::DeSerializer... done
Check if deserialized objects are same... done
Starting 1000 iterations for eval... done (44.456 seconds)
Starting 1000 iterations for Data::StreamDeserializer... done (19.702 seconds)
Eval statistic:
1000 iterations were done
maximum deserialization time: 0.0474 seconds
minimum deserialization time: 0.0423 seconds
average deserialization time: 0.0431 seconds
StreamDeserializer statistic:
1000 iterations were done
1000 SUBiterations were done
355623 bytes in one block in one iteration
maximum deserialization time: 0.0179 seconds
minimum deserialization time: 0.0168 seconds
average deserialization time: 0.0171 seconds
average subiteration time: 0.01705 seconds
AUTHOR
Dmitry E. Oboukhov, <unera@debian.org>
COPYRIGHT AND LICENSE
Copyright (C) 2011 by Dmitry E. Oboukhov
This library is free software; you can redistribute it and/or modify it under the same
terms as Perl itself, either Perl version 5.10.1 or, at your option, any later version of
Perl 5 you may have available.
VCS
The project is placed in my git repo. See here:
<http://git.uvw.ru/?p=data-stream-deserializer;a=summary>