Provided by: liblockfile-simple-perl_0.208-1_all 
NAME
LockFile::Simple - simple file locking scheme
SYNOPSIS
use LockFile::Simple qw(lock trylock unlock);
# Simple locking using default settings
lock("/some/file") || die "can't lock /some/file\n";
warn "already locked\n" unless trylock("/some/file");
unlock("/some/file");
# Build customized locking manager object
$lockmgr = LockFile::Simple->make(-format => '%f.lck',
-max => 20, -delay => 1, -nfs => 1);
$lockmgr->lock("/some/file") || die "can't lock /some/file\n";
$lockmgr->trylock("/some/file");
$lockmgr->unlock("/some/file");
$lockmgr->configure(-nfs => 0);
# Using lock handles
my $lock = $lockmgr->lock("/some/file");
$lock->release;
DESCRIPTION
This simple locking scheme is not based on any file locking system calls such as "flock()"
or "lockf()" but rather relies on basic file system primitives and properties, such as the
atomicity of the "write()" system call. It is not meant to be exempt from all race
conditions, especially over NFS. The algorithm used is described below in the ALGORITHM
section.
It is possible to customize the locking operations to attempt locking once every 5 seconds
for 30 times, or delete stale locks (files that are deemed too ancient) before attempting
the locking.
ALGORITHM
The locking alogrithm attempts to create a lockfile using a temporarily redefined umask
(leaving only read rights to prevent further create operations). It then writes the
process ID (PID) of the process and closes the file. That file is then re-opened and read.
If we are able to read the same PID we wrote, and only that, we assume the locking is
successful.
When locking over NFS, i.e. when the one of the potentially locking processes could access
the lockfile via NFS, then writing the PID is not enough. We also write the hostname
where locking is attempted to ensure the data are unique.
CUSTOMIZING
Customization is only possible by using the object-oriented interface, since the
configuration parameters are stored within the object. The object creation routine "make"
can be given configuration parmeters in the form a "hash table list", i.e. a list of
key/value pairs. Those parameters can later be changed via "configure" by specifying a
similar list of key/value pairs.
To benefit from the bareword quoting Perl offers, all the parameters must be prefixed with
the "-" (minus) sign, as in "-format" for the format parameter.. However, when querying
the object, the minus must be omitted, as in "$obj->format".
Here are the available configuration parmeters along with their meaning, listed in
alphabetical order:
autoclean
When true, all locks are remembered and pending ones are automatically released when
the process exits normally (i.e. whenever Perl calls the END routines).
delay
The amount of seconds to wait between locking attempts when the file appears to be
already locked. Default is 2 seconds.
efunc
A function pointer to dereference when an error is to be reported. By default, it
redirects to the logerr() routine if you have Log::Agent installed, to Perl's warn()
function otherwise.
You may set it explicitly to "\&LockFile::Simple::core_warn" to force the use of
Perl's warn() function, or to "undef" to suppress logging.
ext The locking extension that must be added to the file path to be locked to compute the
lockfile path. Default is ".lock" (note that "." is part of the extension and can
therefore be changed). Ignored when format is also used.
format
Using this parmeter supersedes the ext parmeter. The formatting string specified is
run through a rudimentary macro expansion to derive the lockfile path from the file to
be locked. The following macros are available:
%% A real % sign
%f The full file path name
%D The directory where the file resides
%F The base name of the file
%p The process ID (PID)
The default is to use the locking extension, which itself is ".lock", so it is as if
the format used was "%f.lock", but one could imagine things like "/var/run/%F.%p",
i.e. the lockfile does not necessarily lie besides the locked file (which could even
be missing).
When locking, the locking format can be specified to supersede the object
configuration itself.
hold
Maximum amount of seconds we may hold a lock. Past that amount of time, an existing
lockfile is removed, being taken for a stale lock. Default is 3600 seconds. Specifying
0 prevents any forced unlocking.
max Amount of times we retry locking when the file is busy, sleeping delay seconds between
attempts. Defaults to 30.
nfs A boolean flag, false by default. Setting it to true means we could lock over NFS and
therefore the hostname must be included along with the process ID in the stamp written
to the lockfile.
stale
A boolean flag, false by default. When set to true, we attempt to detect stale locks
and break them if necessary.
wafter
Stands for warn after. It is the number of seconds past the first warning during
locking time after which a new warning should be emitted. See warn and wmin below.
Default is 20.
warn
A boolean flag, true by default. To suppress any warning, set it to false.
wfunc
A function pointer to dereference when a warning is to be issued. By default, it
redirects to the logwarn() routine if you have Log::Agent installed, to Perl's warn()
function otherwise.
You may set it explicitly to "\&LockFile::Simple::core_warn" to force the use of
Perl's warn() function, or to "undef" to suppress logging.
wmin
The minimal amount of time when waiting for a lock after which a first warning must be
emitted, if warn is true. After that, a warning will be emitted every wafter seconds.
Defaults to 15.
Each of those configuration attributes can be queried on the object directly:
$obj = LockFile::Simple->make(-nfs => 1);
$on_nfs = $obj->nfs;
Those are pure query routines, i.e. you cannot say:
$obj->nfs(0); # WRONG
$obj->configure(-nfs => 0); # Right
to turn of the NFS attribute. That is because my OO background chokes at having querying
functions with side effects.
INTERFACE
The OO interface documented below specifies the signature and the semantics of the
operations. Only the "lock", "trylock" and "unlock" operation can be imported and used via
a non-OO interface, with the exact same signature nonetheless.
The interface contains all the attribute querying routines, one for each configuration
parmeter documented in the CUSTOMIZING section above, plus, in alphabetical order:
configure(-key => value, -key2 => value2, ...)
Change the specified configuration parameters and silently ignore the invalid ones.
lock(file, format)
Attempt to lock the file, using the optional locking format if specified, otherwise
using the default format scheme configured in the object, or by simply appending the
ext extension to the file.
If the file is already locked, sleep delay seconds before retrying, repeating
try/sleep at most max times. If warning is configured, a first warning is emitted
after waiting for wmin seconds, and then once every wafter seconds, via the wfunc
routine.
Before the first attempt, and if hold is non-zero, any existing lockfile is checked
for being too old, and it is removed if found to be stale. A warning is emitted via
the wfunc routine in that case, if allowed.
Likewise, if stale is non-zero, a check is made to see whether any locking process is
still around (only if the lock holder is on the same machine when NFS locking is
configured). Should the locking process be dead, the lockfile is declared stale and
removed.
Returns a lock handle if the file has been successfully locked, which does not
necessarily needs to be kept around. For instance:
$obj->lock('ppp', '/var/run/ppp.%p');
<do some work>
$obj->unlock('ppp');
or, using OO programming:
my $lock = $obj->lock('ppp', '/var/run/ppp.%p') ||;
die "Can't lock for ppp\n";
<do some work>
$lock->relase; # The only method defined for a lock handle
i.e. you don't even have to know which file was locked to release it, since there is a
lock handle right there that knows enough about the lock parameters.
lockfile(file, format)
Simply compute the path of the lockfile that would be used by the lock procedure if it
were passed the same parameters.
make(-key => value, -key2 => value2, ...)
The creation routine for the simple lock object. Returns a blessed hash reference.
trylock(file, format)
Same as lock except that it immediately returns false and does not sleep if the to-be-
locked file is busy, i.e. already locked. Any stale locking file is removed, as lock
would do anyway.
Returns a lock hande if the file has been successfully locked.
unlock(file)
Unlock the file.
BUGS
The algorithm is not bullet proof. It's only reasonably safe. Don't bet the integrity of
a mission-critical database on it though.
The sysopen() call should probably be used with the "O_EXCL|O_CREAT" flags to be on the
safer side. Still, over NFS, this is not an atomic operation anyway.
BEWARE: there is a race condition between the time we decide a lock is stale or too old
and the time we unlink it. Don't use "-stale" and set "-hold" to 0 if you can't bear with
that idea, but recall that this race only happens when something is already wrong. That
does not make it right, nonetheless. ;-)
AUTHOR
Raphael Manfredi <Raphael_Manfredi@pobox.com>
SEE ALSO
File::Flock(3).