Provided by: libmail-mboxparser-perl_0.55-4_all 
NAME
Mail::MboxParser - read-only access to UNIX-mailboxes
SYNOPSIS
use Mail::MboxParser;
my $parseropts = {
enable_cache => 1,
enable_grep => 1,
cache_file_name => 'mail/cache-file',
};
my $mb = Mail::MboxParser->new('some_mailbox',
decode => 'ALL',
parseropts => $parseropts);
# -----------
# slurping
for my $msg ($mb->get_messages) {
print $msg->header->{subject}, "\n";
$msg->store_all_attachments(path => '/tmp');
}
# iterating
while (my $msg = $mb->next_message) {
print $msg->header->{subject}, "\n";
# ...
}
# we forgot to do something with the messages
$mb->rewind;
while (my $msg = $mb->next_message) {
# iterate again
# ...
}
# subscripting one message after the other
for my $idx (0 .. $mb->nmsgs - 1) {
my $msg = $mb->get_message($idx);
}
DESCRIPTION
This module attempts to provide a simplified access to standard UNIX-mailboxes. It offers
only a subset of methods to get 'straight to the point'. More sophisticated things can
still be done by invoking any method from MIME::Tools on the appropriate return values.
Mail::MboxParser has not been derived from Mail::Box and thus isn't acquainted with it in
any way. It, however, incorporates some invaluable hints by the author of Mail::Box, Mark
Overmeer.
METHODS
See also the section ERROR-HANDLING much further below.
More to that, see the relevant manpages of Mail::MboxParser::Mail,
Mail::MboxParser::Mail::Body and Mail::MboxParser::Mail::Convertable for a description of
the methods for these objects.
new(mailbox, options)
new(scalar-ref, options)
new(array-ref, options)
new(filehandle, options)
This creates a new MboxParser-object opening the specified 'mailbox' with either
absolute or relative path.
new() can also take a reference to a variable containing the mailbox either as one
string (reference to a scalar) or linewise (reference to an array), or a filehandle
from which to read the mailbox.
The following option(s) may be useful. The value in brackets below the key is the
default if none given.
key: | value: | description:
==========|============|===============================
decode | 'NEVER' | never decode transfer-encoded
(NEVER) | | data
|------------|-------------------------------
| 'BODY' | will decode body into a human-
| | readable format
|------------|-------------------------------
| 'HEADER' | will decode header fields if
| | any is encoded
|------------|-------------------------------
| 'ALL' | decode any data
==========|============|===============================
uudecode | 1 | enable extraction of uuencoded
(0) | | attachments in MIME::Parser
|------------|-------------------------------
| 0 | uuencoded attachments are
| | treated as plain body text
==========|============|===============================
newline | 'UNIX' | UNIXish line-endings
(AUTO) | | ("\n" aka \012)
|------------|-------------------------------
| 'WIN' | Win32 line-endings
| | ("\n\r" aka \012\015)
|------------|-------------------------------
| 'AUTO' | try to do autodetection
|------------|-------------------------------
| custom | a user-given value for totally
| | borked mailboxes
==========|============|===============================
oldparser | 1 | uses the old (and slower)
(0) | | parser (but guaranteed to show
| | the old behaviour)
|------------|-------------------------------
| 0 | uses Mail::Mbox::MessageParser
==========|============|===============================
parseropts| | see "Specifying parser opts"
| | below
==========|============|===============================
The newline option comes in handy if you have a mbox-file that happens to not conform
to the rules of your operating-system's character semantics one way or another. One
such scenario: You are using the module under Win but deliberately have mailboxes with
UNIX-newlines (or the other way round). If you do not give this option, 'AUTO' is
assumed and some basic tests on the mailbox are performed. This autoedection is of
course not capable of detecting cases where you use something like '#DELIMITER' as
line-ending. It can as to yet only distinguish between UNIX and Win32ish newlines. You
may be lucky and it even works for Macintoshs. If you have more extravagant wishes,
pass a costum value:
my $mb = new Mail::MboxParser ("mbox", newline => '#DELIMITER');
You can't use regexes here since internally this relies on the $/ var
($INPUT_RECORD_SEPERATOR, that is).
When passing either a scalar-, array-ref or \*STDIN as first-argument, an anonymous
tmp-file is created to hold the data. This procedure is hidden away from the user so
there is no need to worry about it. Since a tmp-file acts just like an ordinary
mailbox-file you don't need to be concerned about loss of data or so once you have
been walking through the mailbox-data. No data will be lost and it'll all be fine and
smooth.
Specifying parser options
When available, the module will use "Mail::Mbox::MessageParser" to do the parsing. To get
the most speed out of it, you can tweak some of its options. Arguably, you even have to
do that in order to make it use caching. Options for the parser are given via the
parseropts switch that expects a reference to a hash as values. The values you can specify
are:
enable_cache
When set to a true value, caching is used but only if you gave cache_file_name.
There is no default value here!
cache_file_name
The file used for caching. This option is mandatory if enable_cache is true.
enable_grep
When set to a true value (which is the default), the extern grep(1) is used to
speed up parsing. If your system does not provide a usable grep implementation, it
silently falls back to the pure Perl parser.
When the module was unable to create a "Mail::Mbox::MessageParser" object, it will fall
back to the old parser in the hope that the construction of the object then succeeds.
open(source, options)
Takes exactly the same arguments as new() does just that it can be used to change the
characteristics of a mailbox on the fly.
get_messages
Returns an array containing all messages in the mailbox respresented as
Mail::MboxParser::Mail objects. This method is _minimally_ quicker than iterating over
the mailbox using "next_message" but eats much more memory. Memory-usage will grow
linearly for each new message detected since this method creates a huge array
containing all messages. After creating this array, it will be returned.
get_message(n)
Returns the n-th message (first message has index 0) in a mailbox. Examine
"$mb->error" which contains an error-string if the message does not exist. In this
case, "get_message" returns undef.
next_message
This lets you iterate over a mailbox one mail after another. The great advantage over
"get_messages" is the very low memory-comsumption. It will be at a constant level
throughout the execution of your script. Secondly, it almost instantly begins spitting
out Mail::MboxParser::Mail-objects since it doesn't have to slurp in all mails before
returing them.
set_pos(n)
rewind
current_pos
These three methods deal with the position of the internal filehandle backening the
mailbox. Once you have iterated over the whole mailbox using "next_message" MboxParser
has reached the end of the mailbox and you have to do repositioning if you want to
iterate again. You could do this with either "set_pos" or "rewind".
$mb->rewind; # equivalent to
$mb->set_pos(0);
"current_pos" reveals the current position in the mailbox and can be used to later
return to this position if you want to do tricky things. Mark that "current_pos" does
*not* return the current line but rather the current character as returned by Perl's
tell() function.
my $last_pos;
while (my $msg = $mb->next_message) {
# ...
if ($msg->header->{subject} eq 'I was looking for this') {
$last_pos = $mb->current_pos;
last; # bail out here and do something else
}
}
# ...
# ...
# now continue where we stopped:
$mb->set_pos($last_pos)
while (my $msg = $mb->next_message) {
# ...
}
WARNING: Be very careful with these methods when using the parser of
"Mail::Mbox::MessageParser". This parser maintains its own state and you shouldn't
expect it to always be in sync with the state of "Mail::MboxParser". If you need some
finer control over the parsing, better consider to use the public interface as
described in the manpage of Mail::Mbox::MessageParser. Use "parser()" to get the
underlying parser object.
This however may expose you to the same problems turned around: "Mail::MboxParser" may
loose its sync with its parser when you do that.
Therefore: Just avoid any of the above for now and wait till
"Mail::Mbox::MessageParser" has a stable interface.
make_index
You can force the creation of a message-index with this method. The message-index is a
mapping between the index-number of a message (0 .. $mb->nmsgs - 1) and the byte-
position of the filehandle. This is usually done automatically for you once you call
"get_message" hence the first call for a particular message will be a little slower
since the message-index first has to be built. This is, however, done rather quickly.
You can have a peek at the index if you are interested. The following produces a
nicely padded table (suitable for mailboxes up to 9.9999...GB ;-).
$mb->make_index;
for (0 .. $mb->nmsgs - 1) {
printf "%5.5d => %10.10d\n",
$_, $mb->get_pos($_);
}
get_pos(n)
This method takes the index-number of a certain message within the mailbox and returns
the corresponding position of the filehandle that represents that start of the file.
It is mainly used by "get_message()" and you wouldn't really have to bother using it
yourself except for statistical purpose as demonstrated above along with make_index.
nmsgs
Returns the number of messages in a mailbox. You could naturally also call
get_messages in scalar-context, but this one wont create new objects. It just counts
them and thus it is much quicker and wont eat a lot of memory.
parser
Returns the bare "Mail::Mbox::MessageParser" object. If no such object exists returns
"undef".
You can use this method to check whether the module actually uses the old or new
parser. If "parser" returns a false value, it is using the old parsing routines.
METHODS SHARED BY ALL OBJECTS
error
Call this immediately after one of the methods above that mention a possible error-
message.
log Sort of internal weirdnesses are recorded here. Again only the last event is saved.
ERROR-HANDLING
Mail::MboxParser provides a mechanism for you to figure out why some methods did not
function as you expected. There are four classes of unexpected behavior:
(1) bad arguments
In this case you called a method with arguments that did not make sense, hence you
confused Mail::MboxParser. Example:
$mail->store_entity_body; # wrong, needs two arguments
$mail->store_entity_body(0); # wrong, still needs one more
In any of the above two cases, you'll get an error message and your script will exit.
The message will, however, tell you in which line of your script this error occured.
(2) correct arguments but...
Consider this line:
$mail->store_entity_body(50, \*FH); # could be wrong
Obviously you did call store_entity_body with the correct number of arguments. That's
good because now your script wont just exit. Unfortunately, your program can't know in
advance whether the particular mail ($mail) has a 51st entity.
So, what to do?
Just be brave: Write the above line and do the error-checking afterwards by calling
$mail->error immediately after store_entity_body:
$mail->store_entity_body(50, *\FH);
if ($mail->error) {
print "Oups, something wrong:", $mail->error;
}
In the description of the available methods above, you always find a remark when you
could use $mail->error. It always returns a string that you can print out and
investigate any further.
(3) errors, that never get visible
Well, they exist. When you handle MIME-stuff a lot such as attachments etc.,
Mail::MboxParser internally calls a lot of methods provided by the MIME::Tools
package. These work splendidly in most cases, but the MIME::Tools may fail to produce
something sensible if you have a very queer or even screwed up mailbox.
If this happens you might find information on that when calling $mail->log. This will
give you the more or less unfiltered error-messages produced by MIME::Tools.
My advice: Ignore them! If there really is something in $mail->log it is either
because you're mails are totally weird (there is nothing you can do about that then)
or these errors are smoothly catched inside Mail::MboxParser in which case all should
be fine for you.
(4) the apocalyps
If nothing seems to work the way it should and $mail->error is empty, then the worst
case has set in: Mail::MboxParser has a bug.
Needless to say that there is any way to get around of this. In this case you should
contact and I'll examine that.
CAVEATS
I have been working hard on making Mail::MboxParser eat less memory and as quick as
possible. Due to that, two time and memory consuming matters are now called on demand.
That is, parsing out the MIME-parts and turning the raw header into a hash have become
closures.
The drawback of that is that it may get inefficient if you often call
$mail->header->{field}
In this case you should probably save the return value of $mail->header (a hashref) into a
variable since each time you call it the raw header is parsed.
On the other hand, if you have a mailbox of, say, 25MB, and hold each header of each
message in memory, you'll quickly run out of that. So, you can now choose between more
performance and more memory.
This all does not happen if you just parse a mailbox to extract one header-field (eg.
subject), work with that and exit. In this case it will need both less memory and is still
considerably quicker. :-)
BUGS
Some mailers have a fancy idea of how a "To: "- or "Cc: "-line should look. I have seen
things like:
To: "\"John Doe"\" <john.doe@example.com>
The splitting into name and email, however, does still work here, but you have to remove
these silly double-quotes and backslashes yourself.
The way of counting the messages and detecting them now complies to RFC 822. This is,
however, no guarentee that it all works seamlessly. There are just so many mailboxes that
get screwed up by mal-formated mails.
TODO
Apart from new bugs that almost certainly have been introduced with this release,
following things still need to be done:
Transfer-Encoding
Still, only quoted-printable encoding is correctly handled.
Tests
Clean-up of the test-scripts is desperately needed. Now they represent rather an
arbitrary selection of tested functions. Some are tested several times while others
don't show up at all in the suits.
THANKS
Thanks to a number of people who gave me invaluable hints that helped me with Mail::Box,
notably Mark Overmeer for his hints on more object-orientedness.
Kenn Frankel (kenn AT kenn DOT cc) kindly patched the broken split-header routine and
added get_field().
David Coppit for making me aware of "Mail::Mbox::MessageParser" and designing it the way I
needed to make it work for my module.
VERSION
This is version 0.55.
AUTHOR AND COPYRIGHT
Tassilo von Parseval <tassilo.von.parseval@rwth-aachen.de>
Copyright (c) 2001-2005 Tassilo von Parseval. This program is free software; you can
redistribute it and/or modify it under the same terms as Perl itself.
SEE ALSO
MIME::Entity
Mail::MboxParser::Mail, Mail::MboxParser::Mail::Body, Mail::MboxParser::Mail::Convertable
Mail::Mbox::MessageParser