Provided by: libmason-perl_2.21-1_all 
NAME
Mason::Manual::Filters - Content filters in Mason
DESCRIPTION
Filters can be used to process portions of content in a component.
A set of filters comes built-in with Mason - see Mason::Filters::Standard. Others will be
available on CPAN, and it is easy to create your own.
INVOKING
Block invocation
Here's the standard way of invoking a filter:
% $.Trim {{
This string will be trimmed
% }} # end Trim
A double open brace ("{{") at the end of a "%-line" denotes a filter call. The filtered
content begins just afterwards and ends at the "}}". Both "{{" and "}}" may be followed
by a comment.
The expression "$.Trim", aka "$self->Trim", is a method call on the component object which
returns a filter. In general everything before the "{{" is evaluated and is expected to
return a filter or list of filters.
By convention, and to avoid name clashes with other component methods, filters use
CamelCase rather than traditional underscore names.
Filters can take arguments:
% $.Repeat(3) {{
There's no place like home.
% }}
==> There's no place like home.
There's no place like home.
There's no place like home.
Since the expression "$.Repeat(3)" returns a filter, it can be curried:
% my $repeat_three = $.Repeat(3);
% $repeat_three {{
There's no place like home.
% }}
You can create one-off filters with anonymous subroutines. The subroutine receives the
content in both $_[0] and $_, and should return the filtered content.
% sub { reverse($_[0]) } {{
Hello
% }}
==> olleH
% sub { s/ //g; $_[0] } {{
A bunch of words
% }}
==> Abunchofwords
Filters can be nested, with separate lines:
% $.Trim {{
% sub { uc($_[0]) } {{
This string will be trimmed and uppercased
% }}
% }}
or on a single line:
% $.Trim, sub { uc($_[0]) } {{
This will be trimmed and uppercased
% }}
Multiple filters within the same tag are applied, intuitively, in reverse order with the
last one being innermost. e.g. in this block
% my $i = 1;
% $.Repeat(3), $.Cache($key, '1 hour') {{
<% $i++ %>
% }}
=> 1 1 1
the output of "<% $i++ %>" is cached, and then repeated three times, whereas in this block
% my $i = 1;
% $.Cache($key, '1 hour'), $.Repeat(3) {{
<% $i++ %>
% }}
=> 1 2 3
"<% $i++ %>" is executed and output three times, and then the whole thing cached.
Pipe invocation
Filters can also appear in a limited way inside a regular "<% %>" tag:
<% $content | NoBlankLines,Trim %>
The filter list appears after a << | >> character and must contain one or more comma-
separated names. The names are treated as methods on the current component class. With
this syntax you cannot use anonymous subroutines or variables as filters, or pass
arguments to filters. However in a pinch you can define local filter methods to get around
this, e.g.
<%class>
method Repeat3 { $.Repeat(3); }
</%class>
...
<% $message_body | Repeat3 %>
For consistency with other syntax, multiple names are applied in reverse order with the
rightmost applied first.
One common use of this form is to escape HTML strings in web content, using the "H" filter
in Mason::Plugin::HTMLFilters:
<% $message_body | H %>
Default filters
Mason::Plugin::DefaultFilter allows you to define default filters that will automatically
apply to all substitution tags. It is analagous to HTML::Mason's default_escape_flags
setting.
Manual invocation
$m->filter can be used to manually apply filter(s) to a string. It returns the filtered
output. e.g.
<%init>
...
my $filtered_string = $m->filter($.Trim, $.NoBlankLines, $string);
</%init>
CREATING A FILTER
Package and naming
By convention, filters are placed in roles so that they can be composed into
Mason::Component or a subclass thereof. Take a look at Mason::Filters::Standard for an
example.
Also by convention, filters use CamelCase rather than traditional underscore_separated
naming. Filter methods have to coexist with other methods in the Mason::Component
namespace, so have to be distinguishable somehow, and we thought this was preferable to a
"filter_" prefix or suffix. Of course, you are free to choose your own convention, but you
should expect this naming in the standard filters at least.
Here's a filter package that implements two filters, "Upper" and "Lower":
package MyApp::Filters;
use Mason::PluginRole;
method Upper () {
return sub { uc($_[0]) }
}
method Lower () {
return sub { lc($_[0]) }
}
1;
To use these in a component:
<%class>
with 'MyApp::Filters';
</%class>
% $.Upper {{
...
% }}
Or if you want them available to all components, put them in "Base.mp" at the top of your
component hierarchy, or in your application's "Mason::Component" subclass.
Simple vs. dynamic filters
A simple filter is a code ref which takes a string (via either $_[0] and $_) and returns
the output. Your filter method should return this code ref. e.g.
# Uses $_[0]
method Upper () {
return sub { uc($_[0]) };
}
# Uses $_
method Rot13 () {
return sub { tr/a-zA-Z/n-za-mN-ZA-M/; $_ };
}
A dynamic filter is an object of class "Mason::DynamicFilter". It contains a code ref
which takes a yield block and returns the output. A yield block is a zero-argument code
ref that returns a content string. e.g. this is functionally identical to the above:
method Rot13 () {
return Mason::DynamicFilter->new(
filter => sub {
my $yield = $_[0];
my $text = $yield->();
$text =~ tr/a-zA-Z/n-za-mN-ZA-M/;
return $text;
}
);
}
The dynamic filter obviously doesn't buy you anything in this case, and for the majority
of filters they are unneeded. The real power of dynamic filters is that they can choose
if and when to execute the yield block. For example, here is an implementation (slightly
expanded for explanatory purposes) of the "Cache" filter in Mason::Plugin::Cache:
method Cache ( $key, $set_options ) {
return Mason::DynamicFilter->new(
filter => sub {
my $yield = $_[0];
my $cache = $self->cache;
my $output = $cache->get( $key );
if (!$output) {
$output = $yield->();
$cache->set( $key, $output, $set_options );
}
return $output;
}
);
}
Notice that we call "$cache->get" first, and return the output immediately if it is in the
cache. Only on a cache miss do we actually execute the (presumably expensive) yield block.
"Defer" and "Repeat" are two other examples of dynamic filters. See
Mason::Filters::Standard for their implementations.
<%filter> block
You can use the "<%filter>" block to define filters that output content. It works just
like a "<%method>" block, except that you can call "$yield->()" to generate the original
content. e.g.
<%filter Item ($class)>
<li class="<% $class %>"><% $yield->() %></li>
</%filter>
% $.Item('std') {{
First
% }}
% $.Item('std') {{
Second
% }}
generates
<li class="std">
First
</li>
<li class="std">
Second
</li>
SEE ALSO
Mason::Filters::Standard, Mason
AUTHOR
Jonathan Swartz <swartz@pobox.com>
COPYRIGHT AND LICENSE
This software is copyright (c) 2012 by Jonathan Swartz.
This is free software; you can redistribute it and/or modify it under the same terms as
the Perl 5 programming language system itself.