Provided by: libmodule-install-perl_1.06-1_all 
NAME
Module::AutoInstall - Automatic install of dependencies via CPAN
SYNOPSIS
In Makefile.PL, with Module::Install available on the author's system:
use inc::Module::Install;
name 'Joe-Hacker';
abstract 'Perl Interface to Joe Hacker';
author 'Joe Hacker <joe@hacker.org>';
include 'Module::AutoInstall';
requires 'Module0'; # mandatory modules
feature 'Feature1',
-default => 0,
'Module2' => '0.1';
feature 'Feature2',
-default => 0,
'Module3' => '1.0';
auto_install(
make_args => '--hello', # option(s) for CPAN::Config
force => 1, # pseudo-option to force install
do_once => 1, # skip previously failed modules
);
WriteAll;
Invoking the resulting Makefile.PL:
% perl Makefile.PL # interactive behaviour
% perl Makefile.PL --defaultdeps # accept default value on prompts
% perl Makefile.PL --checkdeps # check only, no Makefile produced
% perl Makefile.PL --skipdeps # ignores all dependencies
% perl Makefile.PL --testonly # don't write installation targets
Note that the trailing 'deps' of arguments may be omitted, too.
Using "--defaultdeps" will make Makefile.PL behave similarly to a regular Makefile.PL file
with "PREREQ_PM" dependencies.
One can use environment variables (see "ENVIRONMENT") below to set a default behavior
instead of specifying it in the command line for every invocation of Makefile.PL.
Using make (or nmake):
% make [all|test|install] # install dependencies first
% make checkdeps # same as the --checkdeps above
% make installdeps # install dependencies only
% make installdeps_notest # same without running tests
% make upgradedeps # upgrade all deps, even if installed
% make upgradedeps_notest # same without running tests
% make listdeps # print unsatisifed deps, one per line
% make listalldeps # print all deps, one per line
DESCRIPTION
Module::AutoInstall lets module writers to specify a more sophisticated form of dependency
information than the "PREREQ_PM" option offered by ExtUtils::MakeMaker.
This module works best with the Module::Install framework, a drop-in replacement for
MakeMaker. However, this module also supports Makefile.PL files based on MakeMaker; see
"EXAMPLES" for instructions.
Specifying "installdeps_target;" instead of "auto_install;" will not try to install
dependencies when running "make", but only when running "make installdeps".
Prerequisites and Features
Prerequisites are grouped into features, and the user could choose yes/no on each one's
dependencies; the module writer may also supply a boolean value via "-default" to specify
the default choice.
The Core Features marked by the name "-core" will double-check with the user, if the user
chooses not to install the mandatory modules. This differs from the pre-0.26 'silent
install' behaviour.
Starting from version 0.27, if "-core" is set to the string "all" (case-insensitive),
every feature will be considered mandatory.
The dependencies are expressed as pairs of "Module" => "version" inside an array
reference. If the order does not matter, and there are no "-default", "-tests" or
"-skiptests" directives for that feature, you may also use a hash reference.
The Installation Process
Once Module::AutoInstall has determined which module(s) are needed, it checks whether it's
running under the CPAN shell and should therefore let CPAN handle the dependency.
Finally, the "WriteMakefile()" is overridden to perform some additional checks, as well as
skips tests associated with disabled features by the "-tests" option.
The actual installation happens at the end of the "make config" target; both "make test"
and "make install" will trigger the installation of required modules.
If it's not running under CPAN, the installer will probe for an active connection by
trying to resolve the domain "cpan.org", and check for the user's permission to use CPAN.
If all went well, a separate
CPAN instance is created to install the required modules.
If you have the CPANPLUS package installed in your system, it is preferred by default over
CPAN; it also accepts some extra options (e.g. "-target => 'skiptest', -skiptest => 1" to
skip testing).
All modules scheduled to be installed will be deleted from %INC first, so
ExtUtils::MakeMaker will check the newly installed modules.
Additionally, you could use the "make installdeps" target to install the modules, and the
"make checkdeps" target to check dependencies without actually installing them; the "perl
Makefile.PL --checkdeps" command has an equivalent effect.
If the Makefile.PL itself needs to use an independent module (e.g. Acme::KillarApp, v1.21
or greater), then use something like below:
BEGIN {
require Module::AutoInstall;
# the first argument is an arrayref of the -config flags
Module::AutoInstall->install([], 'Acme::KillerApp' => 1.21);
}
use Acme::KillerApp 1.21;
Module::AutoInstall->import(
# ... arguments as usual ...
);
Note the version test in the use clause; if you are so close to the cutting edge that
Acme::KillerApp 1.20 is the latest version on CPAN, this will prevent your module from
going awry.
User-Defined Hooks
User-defined pre-installation and post-installation hooks are available via
"MY::preinstall" and "MY::postinstall" subroutines, as shown below:
# pre-install handler; takes $module_name and $version
sub MY::preinstall { return 1; } # return false to skip install
# post-install handler; takes $module_name, $version, $success
sub MY::postinstall { return; } # the return value doesn't matter
Note that since Module::AutoInstall performs installation at the time of "use" (i.e.
before perl parses the remainder of Makefile.PL), you have to declare those two handlers
before the "use" statement for them to take effect.
If the user did not choose to install a module or it already exists on the system, neither
of the handlers is invoked. Both handlers are invoked exactly once for each module when
installation is attempted.
"MY::preinstall" takes two arguments, $module_name and $version; if it returns a false
value, installation for that module will be skipped, and "MY::postinstall" won't be called
at all.
"MY::postinstall" takes three arguments, $module_name, $version and $success. The last
one denotes whether the installation succeeded or not: 1 means installation completed
successfully, 0 means failure during install, and "undef" means that the installation was
not attempted at all, possibly due to connection problems, or that module does not exist
on CPAN at all.
Customized "MY::postamble"
Starting from version 0.43, Module::AutoInstall supports modules that require a
"MY::postamble" subroutine in their Makefile.PL. The user-defined "MY::postamble", if
present, is responsible for calling "Module::AutoInstall::postamble" and include the
output in its return value.
For example, the DBD::* (database driver) modules for the Perl DBI are required to include
the postamble generated by the function "dbd_postamble", so their Makefile.PL may contain
lines like this:
sub MY::postamble {
return &Module::AutoInstall::postamble . &dbd_postamble;
}
Note that the Module::AutoInstall module does not export the "postamble" function, so the
name should always be fully qualified.
CAVEATS
Module::AutoInstall will add "UNINST=1" to your make install flags if your effective uid
is 0 (root), unless you explicitly disable it by setting CPAN's "make_install_arg"
configuration option (or the "makeflags" option of CPANPLUS) to include "UNINST=0". This
may cause dependency problems if you are using a fine-tuned directory structure for your
site. Please consult "FAQ" in CPAN for an explanation in detail.
If either version or Sort::Versions is available, they will be used to compare the
required version with the existing module's version and the CPAN module's. Otherwise it
silently falls back to use cmp. This may cause inconsistent behaviours in pathetic
situations.
ENVIRONMENT
Module::AutoInstall uses a single environment variable, "PERL_AUTOINSTALL". It is taken
as the command line argument passed to Makefile.PL; you could set it to "--alldeps",
"--defaultdeps" or "--skipdeps" to avoid all interactive behaviour.
"--alldeps" will install all features, while "--defaultdeps" will only install features
for which the default answer is 'y'.
"--skipdeps" will refrain from loading CPAN and not install anything, unless you're
running under CPAN or CPANPLUS, in which case required dependencies will be installed.
It is also read from the "PERL_EXTUTILS_AUTOINSTALL" environment variable if
"PERL_AUTOINSTALL" is not defined.
You can also set "PERL_AUTOINSTALL_PREFER_CPAN" to use CPAN to install dependencies. By
default CPANPLUS is used.
SEE ALSO
Module::Install
perlmodlib, ExtUtils::MakeMaker, Sort::Versions, CPAN, CPANPLUS
AUTHORS
Audrey Tang <autrijus@autrijus.org>
Adam Kennedy <adamk@cpan.org>
Matt S Trout <mst@shadowcat.co.u>
IF THIS BREAKS
Report a ticket to bugs-Module-Install <at> rt.cpan.org and cc Matt - I appear to have
volunteered as primary maintainer for this stuff so if you run into any problems please
tell me
COPYRIGHT
Copyright 2001, 2002, 2003, 2004, 2005, 2006 by Audrey Tang
Some parts copyright 2006 Adam Kennedy
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.
See <http://www.perl.com/perl/misc/Artistic.html>