Ubuntu Manpage: Net::DNS::SEC::Tools::rollmgr - Communicate with the DNSSEC-Tools rollover manager.

NAME

       Net::DNS::SEC::Tools::rollmgr - Communicate with the DNSSEC-Tools rollover manager.

SYNOPSIS

         use Net::DNS::SEC::Tools::rollmgr;

         $dir = rollmgr_dir();

         $idfile = rollmgr_idfile();

         $id = rollmgr_getid();

         rollmgr_dropid();

         rollmgr_rmid();

         rollmgr_cmdint();

         $runflag = rollmgr_running();

         rollmgr_halt();

         rollmgr_phasemsg('long');

         rollmgr_channel(1);
         ($cmd,$data) = rollmgr_getcmd();
         $ret = rollmgr_verifycmd($cmd);

         rollmgr_sendcmd(CHANNEL_CLOSE,ROLLCMD_ROLLZSK,"example.com");

         rollmgr_sendcmd(CHANNEL_WAIT,ROLLCMD_ROLLZSK,"example.com");
         ($retcode, $respmsg) = rollmgr_getresp();

         $descr = rollmgr_get_phase('KSK', $phasecnt);

DESCRIPTION

       The Net::DNS::SEC::Tools::rollmgr module provides standard, platform-independent methods
       for a program to communicate with DNSSEC-Tools' rollerd rollover manager.  There are two
       interface classes described here:  general interfaces and communications interfaces.

GENERAL INTERFACES

The interfaces to the Net::DNS::SEC::Tools::rollmgr module are given below.

rollmgr_dir()
This routine returns rollerd's directory.

rollmgr_idfile()
This routine returns rollerd's id file.

rollmgr_getid()
This routine returns rollerd's process id. If a non-zero value is passed as an
argument, the id file will be left open and accessible through the PIDFILE file
handle. See the WARNINGS section below.

Return Values:

On success, the first portion of the file contents
(up to 80 characters) is returned.
-1 is returned if the id file does not exist.

rollmgr_dropid()
This interface ensures that another instance of rollerd is not running and then
creates a id file for future reference.

Return Values:

1 - the id file was successfully created for this process
0 - another process is already acting as rollerd
-1 - unable to create the id file

rollmgr_rmid()
This interface deletes rollerd's id file.

Return Values:

1 - the id file was successfully deleted
0 - no id file exists
-1 - the calling process is not rollerd
-2 - unable to delete the id file

rollmgr_cmdint()
This routine informs rollerd that a command has been sent via rollmgr_sendcmd().

Return Values:

-1 - an invalid process id was found for rollerd
Anything else indicates the number of processes that were
signaled.
(This should only ever be 1.)

rollmgr_running()
This routine determines if rollerd is running and returns a value indicating the
status.

Return Values:

1 - rollerd is running.
0 - The process listed in the rollerd process id file
is not running.
-1 - Unable to get the rollerd process id.

rollmgr_halt()
This routine informs rollerd to shut down.

In the current implementation, the return code from the kill() command is returned.

-1 - an invalid process id was found for rollerd
Anything else indicates the number of processes that were
signaled.
(This should only ever be 1.)

rollmgr_phasemsg()
This routine sets the phase-message length. of phase-related log messages used by
rollerd. The valid levels are "long" and "short", with "long" being the default
value.

The long message length means that a phase description will be included with some log
messages. For example, the long form of a message about ZSK rollover phase 3 will
look like this: "ZSK phase 3 (Waiting for old zone data to expire from caches)".

The short message length means that a phase description will not be included with some
log messages. For example, the short form of a message about ZSK rollover phase 3
will look like this: "ZSK phase 3".

Return Values:

1 - the phase-message length was set
0 - an invalid phase-message length was specified

ROLLERD COMMUNICATIONS INTERFACES

rollmgr_channel(serverflag)
This interface sets up a persistent channel for communications with rollerd. If
serverflag is true, then the server's side of the channel is created. If serverflag
is false, then the client's side of the channel is created.

Currently, the connection may only be made to the localhost. This may be changed to
allow remote connections, if this is found to be needed.

Return Values:

1 - Communications channel successfully established.
0 - Unable to connect to the server.
-1 - Unable to create a Unix socket.
-2 - Unable to bind to the Unix socket. (server only)
-3 - Unable to change the permissions on the Unix socket. (server only)
-4 - Unable to listen on the Unix socket. (server only)
-5 - The socket name was longer than allowed for a Unix socket.

rollmgr_queuecmd(cmdname, value)
This interface internally remembers a command and it's optional value for later
processing. See the rollmgr_getcmd() next for further details.

rollmgr_getcmd()
rollmgr_getcmd() processes commands that need to be dealt with. If there are any
internally stored commands queued via the rollmgr_queuecmd() function, they are dealt
with first. After that it retrieves a command sent over rollerd's communications
channel by a client program. The command and the command's data are sent in each
message.

The command and the command's data are returned to the caller.

rollmgr_sendcmd(closeflag,cmd,data)
rollmgr_sendcmd() sends a command to rollerd. The command must be one of the commands
from the table below. This interface creates a communications channel to rollerd and
sends the message. The channel is not closed, in case the caller wants to receive a
response from rollerd.

The available commands and their required data are:

command data purpose
------- ---- -------
ROLLCMD_DISPLAY 1/0 start/stop rollerd's
graphical display
ROLLCMD_DSPUB zone-name a DS record has been
published
ROLLCMD_DSPUBALL none DS records published for all
zones in KSK rollover phase 5
ROLLCMD_GETSTATUS none currently unused
ROLLCMD_LOGFILE log filename change the log file
ROLLCMD_LOGLEVEL log level set a new logging level
ROLLCMD_LOGMSG log message add a message to the log
ROLLCMD_LOGTZ timezone set timezone for log messages
ROLLCMD_MERGERRFS rollrec files merge rollrec files with the
current rollrec file
ROLLCMD_PHASEMSG long/short set long or short phase
messages
ROLLCMD_QUEUELIST none returns the names and next
event time of zones in the
"soon queue
(experimental)
ROLLCMD_QUEUESTATUS none returns information about
the state of soon-queue
processing
(experimental)
ROLLCMD_ROLLALL none resume rollover for all
suspended zones
ROLLCMD_ROLLALLZSKS none force all zones to start
ZSK rollover
ROLLCMD_ROLLKSK zone-name force a zone to start
KSK rollover
ROLLCMD_ROLLREC rollrec-name change rollerd's rollrec file
ROLLCMD_ROLLZONE zone name restart rollover for a
suspended zone
ROLLCMD_ROLLZSK zone-name force a zone to start
ZSK rollover
ROLLCMD_RUNQUEUE none rollerd runs through
its queue
ROLLCMD_SHUTDOWN none stop rollerd
ROLLCMD_SIGNZONE zone sign a zone (no rollover)
ROLLCMD_SIGNZONEs all or active sign all or active zones
ROLLCMD_SKIPALL none suspend all rollovers
ROLLCMD_SKIPZONE zone name suspend rollover for a
rolling zone
ROLLCMD_SLEEPTIME seconds-count set rollerd's sleep time
ROLLCMD_SPLITRRF rollrec-name, move a set of zones from the
zone names current rollrec file into a
new rollrec file
ROLLCMD_STATUS none get status of rollerd
ROLLCMD_ZONEGROUP zonegroup name get info on all zonegroups
or a particular zonegroup
ROLLCMD_ZONELOG zone name set the logging level for
logging level a particular zone
ROLLCMD_ZONESTATUS none get status of the zones
ROLLCMD_ZSARGS zonesigner args add a (probably temporary)
zone list set of options to the signing
of a set of zones

The data aren't checked for validity by rollmgr_sendcmd(); validity checking is a
responsibility of rollerd.

If the caller does not need a response from rollerd, then closeflag should be set to
CHANNEL_CLOSE; if a response is required then closeflag should be CHANNEL_WAIT. These
values are boolean values, and the constants aren't required.

On success, 1 is returned. If an invalid command is given, 0 is returned.

rollmgr_getresp()
After executing a client command sent via rollmgr_sendcmd(), rollerd will send a
response to the client. rollmgr_getresp() allows the client to retrieve the response.

A return code and a response string are returned, in that order. Both are specific to
the command sent.

rollmgr_verifycmd(cmd)
rollmgr_verifycmd() verifies that cmd is a valid command for rollerd. 1 is returned
for a valid command; 0 is returned for an invalid command.

1 is returned for a valid command; 0 is returned for an invalid command.

rollmgr_get_phase(phasetype, phasenum)
rollmgr_get_phase() returns a description of a particular phase for a particular type
of rollover. phasetype specifies the type of rollover, and may be "KSK" or "ZSK".
phasenum specifies the phase number whose description is desired. This must be an
integer between 0 and 7 (KSK) or 0 and 4 (ZSK). If an invalid phase type or phase
number is specified, an empty string is returned.

WARNINGS

       1.  rollmgr_getid() attempts to exclusively lock the id file.  Set a timer if this matters
       to you.

       2.  rollmgr_getid() has a nice little race condition.  We should lock the file prior to
       opening it, but we can't do so without it being open.

COPYRIGHT

       Copyright 2005-2013 SPARTA, Inc.  All rights reserved.  See the COPYING file included with
       the DNSSEC-Tools package for details.

AUTHOR

       Wayne Morrison, tewok@tislabs.com

NAME

SYNOPSIS

DESCRIPTION

GENERAL INTERFACES

ROLLERD COMMUNICATIONS INTERFACES

WARNINGS

COPYRIGHT

AUTHOR

SEE ALSO