Provided by: pdl_2.007-2build1_amd64 
NAME
PDL::IO::FlexRaw -- A flexible binary I/O format for PerlDL
SYNOPSIS
use PDL;
use PDL::IO::FlexRaw;
# To obtain the header for reading (if multiple files use the
# same header, for example):
#
$hdr = PDL::IO::FlexRaw::_read_flexhdr("filename.hdr")
($x,$y,...) = readflex("filename" [, $hdr])
($x,$y,...) = mapflex("filename" [, $hdr] [, $opts])
$hdr = writeflex($file, $pdl1, $pdl2,...)
writeflexhdr($file, $hdr)
# if $PDL::IO::FlexRaw::writeflexhdr is true and
# $file is a filename, writeflexhdr() is called automatically
#
$hdr = writeflex($file, $pdl1, $pdl2,...) # need $hdr for something
writeflex($file, $pdl1, $pdl2,...) # ..if $hdr not needed
DESCRIPTION
FlexRaw is a generic method for the input and output of `raw' data arrays. In particular,
it is designed to read output from FORTRAN 77 UNFORMATTED files and the low-level C write
function, even if the files are compressed or gzipped. As in FastRaw, the data file is
supplemented by a header file (although this can be replaced by the optional $hdr
argument). More information can be included in the header file than for FastRaw -- the
description can be extended to several data objects within a single input file.
For example, to read the output of a FORTRAN program
real*4 a(4,600,600)
open (8,file='banana',status='new',form='unformatted')
write (8) a
close (8)
the header file (`banana.hdr') could look like
# FlexRaw file header
# Header word for F77 form=unformatted
Byte 1 4
# Data
Float 3 # this is ignored
4 600 600
Byte 1 4 As is this, as we've got all dims
The data can then be input using
$a = (readflex('banana'))[1];
The format of the hdr file is an extension of that used by FastRaw. Comment lines
(starting with #) are allowed, as are descriptive names (as elsewhere: byte, short,
ushort, long, float, double) for the data types -- note that case is ignored by FlexRaw.
After the type, one integer specifies the number of dimensions of the data `chunk', and
subsequent integers the size of each dimension. So the specifier above (`Float 3 4 600
600') describes our FORTRAN array. A scalar can be described as `float 0' (or `float 1
1', or `float 2 1 1', etc.).
When all the dimensions are read -- or a # appears after whitespace -- the rest of the
current input line is ignored, unless badvalues are being read or written. In that case,
the next token will be the string "badvalue" followed by the bad value used, if needed.
What about the extra 4 bytes at the head and tail, which we just threw away? These are
added by FORTRAN (at least on Suns, Alphas and Linux), and specify the number of bytes
written by each WRITE -- the same number is put at the start and the end of each chunk of
data. You may need to know all this in some cases. In general, FlexRaw tries to handle
it itself, if you simply add a line saying `f77' to the header file, before any data
specifiers:
# FlexRaw file header for F77 form=unformatted
F77
# Data
Float 3
4 600 600
-- the redundancy in FORTRAN data files even allows FlexRaw to automatically deal with
files written on other machines which use back-to-front byte ordering. This won't always
work -- it's a 1 in 4 billion chance it won't, even if you regularly read 4Gb files!
Also, it currently doesn't work for compressed files, so you can say `swap' (again before
any data specifiers) to make certain the byte order is swapped.
The optional $hdr argument allows the use of an anonymous array to give header
information, rather than using a .hdr file. For example,
$header = [
{Type => 'f77'},
{Type => 'float', NDims => 3, Dims => [ 4,600,600 ] }
];
@a = readflex('banana',$header);
reads our example file again. As a special case, when NDims is 1, Dims may be given as a
scalar.
Within PDL, readflex and writeflex can be used to write several pdls to a single file --
e.g.
use PDL;
use PDL::IO::FlexRaw;
@pdls = ($pdl1, $pdl2, ...);
$hdr = writeflex("fname",@pdls);
@pdl2 = readflex("fname",$hdr);
writeflexhdr("fname",$hdr); # not needed if $PDL::IO::FlexRaw::writeflexhdr is set
@pdl3 = readflex("fname");
-- "writeflex" produces the data file and returns the file header as an anonymous hash,
which can be written to a .hdr file using "writeflexhdr".
If the package variable $PDL::IO::FlexRaw::writeflexhdr is true, and the "writeflex" call
was with a filename and not a handle, "writeflexhdr" will be called automatically (as done
by "writefraw".
The reading of compressed data is switched on automatically if the filename requested ends
in .gz or .Z, or if the originally specified filename does not exist, but one of these
compressed forms does.
If "writeflex" and "readflex" are given a reference to a file handle as a first parameter
instead of a filename, then the data is read or written to the open filehandle. This
gives an easy way to read an arbitrary slice in a big data volume, as in the following
example:
use PDL;
use PDL::IO::FastRaw;
open(DATA, "raw3d.dat");
binmode(DATA);
# assume we know the data size from an external source
($width, $height, $data_size) = (256,256, 4);
my $slice_num = 64; # slice to look at
# Seek to slice
seek(DATA, $width*$height*$data_size * $slice_num, 0);
$pdl = readflex \*DATA, [{Dims=>[$width, $height], Type=>'long'}];
WARNING: In later versions of perl (5.8 and up) you must be sure that your file is in
"raw" mode (see the perlfunc man page entry for "binmode", for details). Both readflex
and writeflex automagically switch the file to raw mode for you -- but in code like the
snipped above, you could end up seeking the wrong byte if you forget to make the binmode()
call.
"mapflex" memory maps, rather than reads, the data files. Its interface is similar to
"readflex". Extra options specify if the data is to be loaded `ReadOnly', if the data
file is to be `Creat'-ed anew on the basis of the header information or `Trunc'-ated to
the length of the data read. The extra speed of access brings with it some limitations:
"mapflex" won't read compressed data, auto-detect f77 files, or read f77 files written by
more than a single unformatted write statement. More seriously, data alignment
constraints mean that "mapflex" cannot read some files, depending on the requirements of
the host OS (it may also vary depending on the setting of the `uac' flag on any given
machine). You may have run into similar problems with common blocks in FORTRAN.
For instance, floating point numbers may have to align on 4 byte boundaries -- if the data
file consists of 3 bytes then a float, it cannot be read. "mapflex" will warn about this
problem when it occurs, and return the PDLs mapped before the problem arose. This can be
dealt with either by reorganizing the data file (large types first helps, as a rule-of-
thumb), or more simply by using "readflex".
BUGS
The test on two dimensional byte arrays fail using g77 2.7.2, but not Sun f77. I hope
this isn't my problem!
Assumes gzip is on the PATH.
Can't auto-swap compressed files, because it can't seek on them.
The header format may not agree with that used elsewhere.
Should it handle handles?
Mapflex should warn and fallback to reading on SEGV? Would have to make sure that the
data was written back after it was `destroyed'.
FUNCTIONS
readflex
Read a binary file with flexible format specification
Usage:
($x,$y,...) = readflex("filename" [, $hdr])
($x,$y,...) = readflex(FILEHANDLE [, $hdr])
writeflex
Write a binary file with flexible format specification
Usage:
$hdr = writeflex($file, $pdl1, $pdl2,...) # or
$hdr = writeflex(FILEHANDLE, $pdl1, $pdl2,...)
# now you must call writeflexhdr()
writeflexhdr($file, $hdr)
or
$PDL::IO::FlexRaw::writeflexhdr = 1; # set so we don't have to call writeflexhdr
$hdr = writeflex($file, $pdl1, $pdl2,...) # remember, $file must be filename
writeflex($file, $pdl1, $pdl2,...) # remember, $file must be filename
writeflexhdr
Write the header file corresponding to a previous writeflex call
Usage:
writeflexhdr($file, $hdr)
$file or "filename" is the filename used in a previous writeflex
If $file is actually a "filename" then writeflexhdr() will be
called automatically if $PDL::IO::FlexRaw::writeflexhdr is true.
If writeflex() was to a FILEHANDLE, you will need to call
writeflexhdr() yourself since the filename cannot be determined
(at least easily).
mapflex
Memory map a binary file with flexible format specification
Usage:
($x,$y,...) = mapflex("filename" [, $hdr] [, $opts])
All of these options default to false unless set true:
ReadOnly - Data should be readonly
Creat - Create file if it doesn't exist
Trunc - File should be truncated to a length that conforms
with the header
_read_flexhdr
Read a FlexRaw header file and return a header structure.
Usage:
$hdr = PDL::IO::FlexRaw::_read_flexhdr($file)
Note that "_read_flexhdr" is supposed to be an internal function. It was not originally
documented and it is not tested. However, there appeared to be no other method for
obtaining a header structure from a file, so I figured I would write a small bit of
documentation on it.
Bad Value Support
As of PDL-2.4.8, PDL::IO::FlexRaw has support for reading and writing pdls with bad values
in them.
On "writeflex", a piddle argument with "$pdl->badflag == 1" will have the keyword/token
"badvalue" added to the header file after the dimension list and an additional token with
the bad value for that pdl if "$pdl->badvalue != $pdl->orig_badvalue".
On "readflex", a pdl with the "badvalue" token in the header will automatically have its
badflag set and its badvalue as well if it is not the standard default for that type.
The new badvalue support required some additions to the header structure. However, the
interface is still being finalized. For reference the current $hdr looks like this:
$hdr = {
Type => 'byte', # data type
NDims => 2, # number of dimensions
Dims => [640,480], # dims
BadFlag => 1, # is set/set badflag
BadValue => undef, # undef==default
};
$badpdl = readflex('badpdl', [$hdr]);
If you use bad values and try the new PDL::IO::FlexRaw bad value support, please let us
know via the perldl mailing list. Suggestions and feedback are also welcome.
AUTHOR
Copyright (C) Robin Williams <rjrw@ast.leeds.ac.uk> 1997. All rights reserved. There is
no warranty. You are allowed to redistribute this software / documentation under certain
conditions. For details, see the file COPYING in the PDL distribution. If this file is
separated from the PDL distribution, the copyright notice should be included in the file.
Documentation contributions copyright (C) David Mertens, 2010.