Provided by: libpoe-component-ikc-perl_0.2305-1_all 
NAME
POE::Component::IKC::Responder - POE IKC state handler
SYNOPSIS
use POE;
use POE::Component::IKC::Responder;
create_ikc_responder();
...
$kernel->post('IKC', 'post', $to_state, $state);
$ikc->publish('my_name', [qw(state1 state2 state3)]);
DESCRIPTION
This module implements POE IKC state handling. The responder handles posting states to foreign kernels
and calling states in the local kernel at the request of foreign kernels.
There are 2 interfaces to the responder. Either by sending states to the 'IKC' session or the object
interface. While the latter is faster, the better behaved, because POE is a cooperative system.
STATES/METHODS
"spawn"
POE::Component::IKC::Responder->spawn();
This function creates the Responder session and object. Normally, POE::Component::IKC::Client or
POE::Component::IKC::Server does this for you. But in some applications you want to make sure that the
Responder is up and running before then.
"post"
Sends an state request to a foreign kernel. Returns logical true if the state was sent and logical false
if it was unable to send the request to the foreign kernel. This does not mean that the foreign kernel
was able to post the state, however. Parameters are as follows :
"foreign_state"
Specifier for the foreign state. See POE::Component::IKC::Specifier.
"parameters"
A reference to anything you want the foreign state to get as ARG0. If you want to specify several
parameters, use an array ref and have the foreign state dereference it.
$kernel->post('IKC', 'post',
{kernel=>'Syslog', session=>'logger', state=>'log'},
[$faculty, $priority, $message];
or
$ikc->post('poe://Syslog/logger/log', [$faculty, $priority, $message]);
This logs an state with a hypothetical logger.
See the "PROXY SENDER" below.
"call"
This is identical to "post", except it has a 3rd parameter that describes what state should receive the
return value from the foreign kernel.
$kernel->post('IKC', 'call',
'poe://Pulse/timeserver/time', '',
'poe:get_time');
or
$ikc->call({kernel=>'Pulse', session=>'timeserver', state=>'time'},
'', 'poe://me/get_time');
This asks the foreign kernel 'Pulse' for the time. 'get_time' state in the current session is posted
with whatever the foreign state returned.
You do not have to publish callback messages, because they are temporarily published. How temporary?
They can be posted from a remote kernel ONCE only. This, of course, is a problem because someone else
could get in a post before the callback. Such is life.
"foreign_state"
Identical to the "post" "foreign_state" parameter.
"parameters"
Identical to the "post" "parameters" parameter.
"rsvp"
Event identification for the callback. That is, this state is called with the return value of the
foreign state. Can be a "foreign_state" specifier or simply the name of an state in the current
session.
$kernel->call('IKC', 'post',
{kernel=>'e-comm', session=>'CC', state=>'check'},
{CC=>$cc, expiry=>$expiry}, folder=>$holder},
'is_valid');
# or
$ikc->call('poe://e-comm/CC/check',
{CC=>$cc, expiry=>$expiry}, folder=>$holder},
'poe://me/is_valid');
This asks the e-comm server to check if a credit card number is "well formed". Yes, this would probably
be massive overkill.
The "rsvp" state does not need to be published. IKC keeps track of the rsvp state and will allow the
foreign kernel to post to it.
See the "PROXY SENDER" below.
"default"
Sets the default foreign kernel. You must be connected to the foreign kernel first.
Unique parameter is the name of the foreign kernel kernel.
Returns logical true on success.
"register"
Registers foreign kernel names with the responder. This is done during the negociation phase of IKC and
is normaly handled by "IKC::Channel". Will define the default kernel if no previous default kernel
exists.
First parameter is either a single kernel name. Second optional parameter is an array ref of kernel
aliases to be registered.
"unregister"
Unregisters one or more foreign kernel names with the responder. This is done when the foreign kernel
disconnects by POE::Component::IKC::Channel. If this is the default kernel, there is no more default
kernel.
First parameter is either a single kernel name or a kernel alias. Second optional parameter is an array
ref of kernel aliases to be unregistered. This second parameter is a tad silly, because if you
unregister a remote kernel, it goes without saying that all it's aliases get unregistered also.
"register_local"
Registers new aliases for local kernel with the responder. This is done internally by
POE::Component::IKC::Server and POE::Component::IKC::Client. Will NOT define the default kernel.
First and only parameter is an array ref of kernel aliases to be registered.
"publish"
Tell IKC that some states in the current session are available for use by foreign sessions.
"session"
A session alias by which the foreign kernels will call it. The alias must already have been registered
with the local kernel.
"states"
Arrayref of states that foreign kernels may post.
$kernel->post('IKC', 'publish', 'me', [qw(foo bar baz)]);
# or
$ikc->publish('me', [qw(foo bar baz)]);
"retract"
Tell IKC that some states should no longer be available for use by foreign sessions. You do not have to
retract all published states.
"session"
Same as in "publish"
"states"
Same as in "publish". If not supplied, *all* published states are retracted.
$kernel->post('IKC', 'retract', 'me', [qw(foo mibble dot)]);
# or
$ikc->retract('me', [qw(foo)]);
"published"
$list=$kernel->call(IKC=>'published', $session);
Returns a list of all the published states.
$hash=$kernel->call(IKC=>'published');
Returns a hashref, keyed on session IDs. Values are arrayref of states published by that session.
"session"
A session alias that you wish the list of states for.
"subscribe"
Subscribe to foreign sessions or states. When you have subscribed to a foreign session, a proxy session
is created on the local kernel that will allow you to post to it like any other local session.
"specifiers"
An arrayref of the session or state specifiers you wish to subscribe to. While the wildcard '*'
kernel may be used, only the first kernel that acknowledges the subscription will be proxied.
"callback"
Either a state (for the state interface) or a coderef (for the object interface) that is posted (or
called) when all subscription requests have either been replied to, or have timed out.
When called, it has a single parameter, an arrayref of all the specifiers that IKC was able to
subscribe to. It is up to you to see if you have enough of the foreign sessions or states to get the
job done, or if you should give up.
While "callback" isn't required, it makes a lot of sense to use it because it is only way to find out
when the proxy sessions become available.
Example :
$ikc->subscribe([qw(poe://Pulse/timeserver)],
sub { $kernel->post('poe://Pulse/timeserver', 'connect') });
(OK, that's a bad example because we don't check if we actually managed to subscribe or not.)
$kernel->post('IKC', 'subscribe',
[qw(poe://e-comm/CC poe://TouchNet/validation
poe://Cantax/JDE poe://Informatrix/JDE)
],
'poe:subscribed',
);
# and in state 'subscribed'
sub subscribed
{
my($kernel, $specs)=@_[KERNEL, ARG0];
if(@$specs != 4)
{
die "Unable to find all the foreign sessions needed";
}
$kernel->post('poe://Cantax/JDE', 'write', {...somevalues...});
}
This is a bit of a mess. You might want to use the "subscribe" parameter to "spawn" instead.
Subscription receipt timeout is currently set to 120 seconds.
"unsubscribe"
Reverse of the "subscribe" method. However, it is currently not documented well.
"ping"
Responds with 'PONG'. This is auto-published, so it can be called from remote kernels to see if the
local kernel is still around. In fact, I don't see any other use for this.
$kernel->post('poe://remote/IKC', 'ping', 'some_state');
$kernel->delay('some_state', 60); # timeout
sub some_state
{
my($pong)=$_[ARG0];
return if $pong; # all is cool
# YOW! Remote kernel timed out. RUN AROUND SCREAMING!
}
"shutdown"
Hopefully causes IKC and all peripheral sessions to dissapear in a puff of smoke. At the very least, any
sessions left will be either not related to IKC or barely breathing (that is, only have aliases keeping
them from GC). This should allow you to sanely shut down your process.
"monitor"
Allows a session to monitor the state of remote kernels. Currently, a session is informed when a remote
kernel is registered, unregistered, subscribed to or unsubscribed from. One should make sure that the
IKC alias exists before trying to monitor. Do this by calling POE::Component::IKC::Responder->spawn or
in an "on_connect" callback.
$kernel->post('IKC', 'monitor', $remote_kernel_id, $states);
$remote_kernel_id
Name or alias or IKC specifier of the remote kernel you wish to monitor. You can also specify "*" to
monitor ALL remote kernels. If you do, your monitor will be called several times for a given kernel.
This is because a kernel has one name and many aliases. For example, a remote kernel will have a
unique ID within the local kernel, a name (passed to or generated by create_ikc_{kernel,client}) and a
globaly unique ID assigned by the remote kernel via $kernel->ID. This suprises some people, but see
the short note after the explanation of the callback parameters.
Note: An effort has been made to insure that when monitoring "*", "register" is first called with the
remote kernel's unique ID, and subsequent calls are aliases. This can't be guaranteed at this time,
however.
$states
Hashref that specifies what callback states are called when something interesting happens. If $state
is empty or undef, the session will no longer monitor the given remote kernel.
Callback states
The following states can be monitored:
"register"
Called when a remote kernel or alias is registered. This is equivalent to when the connection
phase is finished.
"unregister"
Called when a remote kernel or alias is unregistered. This is equivalent to when the remote kernel
disconnects.
"subscribe"
Called when IKC succeeds in subscribing to a remote session. ARG3 is an IKC::Specifier of what was
subscribed to. Use this for posting to the proxy session.
"unsubscribe"
Called when IKC succeeds in unsubscribing from a remote session.
"shutdown"
You are informed whenever someone tries to do a sane shutdown of IKC and all peripheral sessions.
This will called only once, after somebody posts an IKC/shutdown event.
"data"
Little bit of data (can be scalar or reference) that is passed to the callback. This allows you to
more magic.
The callback states are called the following parameters :
"ARG0"
Name of the kernel that was passed to poe://*/IKC/monitor
"ARG1"
ID or alias of remote kernel from IKC's point of view.
"ARG2"
A flag. If this is true, then ARG1 is the remote kernel unique ID, if false, then ARG1 is an
alias. This is mostly useful when monitoring "*" and is in fact a bit bloatful.
"ARG3"
"$state->{data}" ie any data you want.
"ARG4" ... "ARGN"
Callback-specific parameters. See above.
Most of the time, ARG0 and ARG1 will be the same. Exceptions are if you are monitoring "*" or if you
supplied a full IKC event specifier to IKC/monitor rather then just a plain kernel name.
Short note about monitoring all kernels with "*"
There are 2 reasons circonstances in which you will be monitoring all remote kernels : names known in
advance and names unknown in advance.
If you know kernel names in advance, you might be better off monitoring a given kernel name. However,
you might prefer doing a case-like compare on ARG1 (with regexes, say). This would be useful for
clustering, where various redundant kernels could follow a naming convention like [application]-[host],
so you could compare "ARG1" with "/^credit-/" to find out if you want to set up specific things for that
kernel.
Not knowing the name of a kernel in advance, you could be doing some sort of autodiscovery or maybe just
monitoring for debuging, logging or book-keeping purposes. You obviously don't want to do autodiscovery
for every alias of every kernel, only for the "cannonical name", hence the need for ARG2.
Short note the second
You are more then allowed (in fact, you are encouraged) to use the same callback states when monitoring
multiple kernels. In this case, you will find ARG0 useful for telling them apart.
$kernel->post('IKC', 'monitor', '*',
{register=>'remote_register',
unregister=>'remote_unregister',
subscribe=>'remote_subscribe',
unsubscribe=>'remote_unsubscribe',
data=>'magic box'});
Now remote_{register,unregister,subscribe,unsubscribe} is called for any remote kernel.
$kernel->post('IKC', 'monitor', 'Pulse', {register=>'pulse_connected'});
"pulse_connected" will be called in current session when you succeed in connecting to a kernel called
'Pulse'.
$kernel->post('IKC', 'monitor', '*');
Session is no longer monitoring all kernels, only 'Pulse'.
$kernel->post('IKC', 'monitor', 'Pulse', {});
Now we aren't even interested in 'Pulse';
EXPORTED FUNCTIONS
"create_ikc_responder"
This function creates the Responder session and object. However, you don't need to call this directly,
because POE::Component::IKC::Client or POE::Component::IKC::Server does this for you.
Deprecated, use "spawn".
PROXY SENDER
Event handlers invoked via IKC will have a proxy SENDER session. You may use it to post back to the
remote session.
$poe_kernel->post( $_[SENDER], 'response', @args );
Normally this proxy session is available during the invocation of the event handler. You may claim it
for longer by setting an external reference:
$heap->{remote} = $_[SENDER]->ID;
$poe_kernel->refcount_increment( $heap->{remote}, 'MINE' );
POE::Component::IKC will detect this and create a new proxy session for future calls. It will then be UP
TO YOU to free the session:
$poe_kernel->refcount_decrement( $heap->{remote}, 'MINE' );
Note that you will have to publish any events that will be posted back.
BUGS
Sending session references and coderefs to a foreign kernel is a bad idea. At some point it would be
desirable to recurse through the paramerters and and turn any session references into state specifiers.
The "rsvp" state in call is a bit problematic. IKC allows it to be posted to once, but doesn't check to
see if the foreign kernel is the right one.
"retract" does not currently tell foreign kernels that have subscribed to a session/state about the
retraction.
"call()"ing a state in a proxied foreign session doesn't work, for obvious reasons.
AUTHOR
Philip Gwyn, <perl-ikc at pied.nu>
COPYRIGHT AND LICENSE
Copyright 1999-2011 by Philip Gwyn. All rights reserved.
This library is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.
See <http://www.perl.com/language/misc/Artistic.html>
SEE ALSO
POE, POE::Component::IKC::Server, POE::Component::IKC::Client, POE::Component::IKC::ClientLite,
POE::Component::IKC::Channel, POE::Component::IKC::Proxy, POE::Component::IKC::Freezer,
POE::Component::IKC::Specifier.
perl v5.18.1 2013-02-11 IKC::Responder(3pm)