Provided by: libperl-critic-perl_1.121-1_all 
NAME
Perl::Critic - Critique Perl source code for best-practices.
SYNOPSIS
use Perl::Critic;
my $file = shift;
my $critic = Perl::Critic->new();
my @violations = $critic->critique($file);
print @violations;
DESCRIPTION
Perl::Critic is an extensible framework for creating and applying coding standards to Perl source code.
Essentially, it is a static source code analysis engine. Perl::Critic is distributed with a number of
Perl::Critic::Policy modules that attempt to enforce various coding guidelines. Most Policy modules are
based on Damian Conway's book Perl Best Practices. However, Perl::Critic is not limited to PBP and will
even support Policies that contradict Conway. You can enable, disable, and customize those Polices
through the Perl::Critic interface. You can also create new Policy modules that suit your own tastes.
For a command-line interface to Perl::Critic, see the documentation for perlcritic. If you want to
integrate Perl::Critic with your build process, Test::Perl::Critic provides an interface that is suitable
for test programs. Also, Test::Perl::Critic::Progressive is useful for gradually applying coding
standards to legacy code. For the ultimate convenience (at the expense of some flexibility) see the
criticism pragma.
Win32 and ActivePerl users can find PPM distributions of Perl::Critic at
<http://theoryx5.uwinnipeg.ca/ppms/> and Alexandr Ciornii's downloadable executable at
<http://chorny.net/perl/perlcritic.html>.
If you'd like to try Perl::Critic without installing anything, there is a web-service available at
<http://perlcritic.com>. The web-service does not yet support all the configuration features that are
available in the native Perl::Critic API, but it should give you a good idea of what it does. You can
also invoke the perlcritic web-service from the command-line by doing an HTTP-post, such as one of these:
$> lwp-request -m POST http://perlcritic.com/perl/critic.pl < MyModule.pm
$> wget -q -O - --post-file=MyModule.pm http://perlcritic.com/perl/critic.pl
$> curl --data @MyModule.pm http://perlcritic.com/perl/critic.pl
Please note that the perlcritic web-service is still alpha code. The URL and interface to the service
are subject to change.
Also, ActivePerl includes a very slick graphical interface to Perl-Critic called "perlcritic-gui". You
can get a free community edition of ActivePerl from <http://www.activestate.com>.
INTERFACE SUPPORT
This is considered to be a public class. Any changes to its interface will go through a deprecation
cycle.
CONSTRUCTOR
"new( [ -profile => $FILE, -severity => $N, -theme => $string, -include => \@PATTERNS, -exclude =>
\@PATTERNS, -top => $N, -only => $B, -profile-strictness => $PROFILE_STRICTNESS_{WARN|FATAL|QUIET},
-force => $B, -verbose => $N ], -color => $B, -pager => $string, -allow-unsafe => $B, -criticism-fatal =>
$B)"
"new()"
Returns a reference to a new Perl::Critic object. Most arguments are just passed directly into
Perl::Critic::Config, but I have described them here as well. The default value for all arguments
can be defined in your .perlcriticrc file. See the "CONFIGURATION" section for more information
about that. All arguments are optional key-value pairs as follows:
-profile is a path to a configuration file. If $FILE is not defined, Perl::Critic::Config attempts to
find a .perlcriticrc configuration file in the current directory, and then in your home directory.
Alternatively, you can set the "PERLCRITIC" environment variable to point to a file in another
location. If a configuration file can't be found, or if $FILE is an empty string, then all Policies
will be loaded with their default configuration. See "CONFIGURATION" for more information.
-severity is the minimum severity level. Only Policy modules that have a severity greater than $N
will be applied. Severity values are integers ranging from 1 (least severe violations) to 5 (most
severe violations). The default is 5. For a given "-profile", decreasing the "-severity" will
usually reveal more Policy violations. You can set the default value for this option in your
.perlcriticrc file. Users can redefine the severity level for any Policy in their .perlcriticrc
file. See "CONFIGURATION" for more information.
If it is difficult for you to remember whether severity "5" is the most or least restrictive level,
then you can use one of these named values:
SEVERITY NAME ...is equivalent to... SEVERITY NUMBER
--------------------------------------------------------
-severity => 'gentle' -severity => 5
-severity => 'stern' -severity => 4
-severity => 'harsh' -severity => 3
-severity => 'cruel' -severity => 2
-severity => 'brutal' -severity => 1
The names reflect how severely the code is criticized: a "gentle" criticism reports only the most
severe violations, and so on down to a "brutal" criticism which reports even the most minor
violations.
-theme is special expression that determines which Policies to apply based on their respective
themes. For example, the following would load only Policies that have a 'bugs' AND 'pbp' theme:
my $critic = Perl::Critic->new( -theme => 'bugs && pbp' );
Unless the "-severity" option is explicitly given, setting "-theme" silently causes the "-severity"
to be set to 1. You can set the default value for this option in your .perlcriticrc file. See the
"POLICY THEMES" section for more information about themes.
-include is a reference to a list of string @PATTERNS. Policy modules that match at least one
"m/$PATTERN/ixms" will always be loaded, irrespective of all other settings. For example:
my $critic = Perl::Critic->new(-include => ['layout'] -severity => 4);
This would cause Perl::Critic to apply all the "CodeLayout::*" Policy modules even though they have a
severity level that is less than 4. You can set the default value for this option in your
.perlcriticrc file. You can also use "-include" in conjunction with the "-exclude" option. Note
that "-exclude" takes precedence over "-include" when a Policy matches both patterns.
-exclude is a reference to a list of string @PATTERNS. Policy modules that match at least one
"m/$PATTERN/ixms" will not be loaded, irrespective of all other settings. For example:
my $critic = Perl::Critic->new(-exclude => ['strict'] -severity => 1);
This would cause Perl::Critic to not apply the "RequireUseStrict" and "ProhibitNoStrict" Policy
modules even though they have a severity level that is greater than 1. You can set the default value
for this option in your .perlcriticrc file. You can also use "-exclude" in conjunction with the
"-include" option. Note that "-exclude" takes precedence over "-include" when a Policy matches both
patterns.
-single-policy is a string "PATTERN". Only one policy that matches "m/$PATTERN/ixms" will be used.
Policies that do not match will be excluded. This option has precedence over the "-severity",
"-theme", "-include", "-exclude", and "-only" options. You can set the default value for this option
in your .perlcriticrc file.
-top is the maximum number of Violations to return when ranked by their severity levels. This must
be a positive integer. Violations are still returned in the order that they occur within the file.
Unless the "-severity" option is explicitly given, setting "-top" silently causes the "-severity" to
be set to 1. You can set the default value for this option in your .perlcriticrc file.
-only is a boolean value. If set to a true value, Perl::Critic will only choose from Policies that
are mentioned in the user's profile. If set to a false value (which is the default), then
Perl::Critic chooses from all the Policies that it finds at your site. You can set the default value
for this option in your .perlcriticrc file.
-profile-strictness is an enumerated value, one of "$PROFILE_STRICTNESS_WARN" in
Perl::Critic::Utils::Constants (the default), "$PROFILE_STRICTNESS_FATAL" in
Perl::Critic::Utils::Constants, and "$PROFILE_STRICTNESS_QUIET" in Perl::Critic::Utils::Constants.
If set to "$PROFILE_STRICTNESS_FATAL" in Perl::Critic::Utils::Constants, Perl::Critic will make
certain warnings about problems found in a .perlcriticrc or file specified via the -profile option
fatal. For example, Perl::Critic normally only "warn"s about profiles referring to non-existent
Policies, but this value makes this situation fatal. Correspondingly, "$PROFILE_STRICTNESS_QUIET" in
Perl::Critic::Utils::Constants makes Perl::Critic shut up about these things.
-force is a boolean value that controls whether Perl::Critic observes the magical "## no critic"
annotations in your code. If set to a true value, Perl::Critic will analyze all code. If set to a
false value (which is the default) Perl::Critic will ignore code that is tagged with these
annotations. See "BENDING THE RULES" for more information. You can set the default value for this
option in your .perlcriticrc file.
-verbose can be a positive integer (from 1 to 11), or a literal format specification. See
Perl::Critic::Violation for an explanation of format specifications. You can set the default value
for this option in your .perlcriticrc file.
-unsafe directs Perl::Critic to allow the use of Policies that are marked as "unsafe" by the author.
Such policies may compile untrusted code or do other nefarious things.
-color and -pager are not used by Perl::Critic but is provided for the benefit of perlcritic.
-criticism-fatal is not used by Perl::Critic but is provided for the benefit of criticism.
-color-severity-highest, -color-severity-high, -color-severity-medium, -color-severity-low, and
-color-severity-lowest are not used by Perl::Critic, but are provided for the benefit of perlcritic.
Each is set to the Term::ANSIColor color specification to be used to display violations of the
corresponding severity.
-files-with-violations and -files-without-violations are not used by Perl::Critic, but are provided
for the benefit of perlcritic, to cause only the relevant filenames to be displayed.
METHODS
"critique( $source_code )"
Runs the $source_code through the Perl::Critic engine using all the Policies that have been loaded
into this engine. If $source_code is a scalar reference, then it is treated as a string of actual
Perl code. If $source_code is a reference to an instance of PPI::Document, then that instance is
used directly. Otherwise, it is treated as a path to a local file containing Perl code. This method
returns a list of Perl::Critic::Violation objects for each violation of the loaded Policies. The
list is sorted in the order that the Violations appear in the code. If there are no violations, this
method returns an empty list.
"add_policy( -policy => $policy_name, -params => \%param_hash )"
Creates a Policy object and loads it into this Critic. If the object cannot be instantiated, it will
throw a fatal exception. Otherwise, it returns a reference to this Critic.
-policy is the name of a Perl::Critic::Policy subclass module. The 'Perl::Critic::Policy' portion of
the name can be omitted for brevity. This argument is required.
-params is an optional reference to a hash of Policy parameters. The contents of this hash reference
will be passed into to the constructor of the Policy module. See the documentation in the relevant
Policy module for a description of the arguments it supports.
" policies() "
Returns a list containing references to all the Policy objects that have been loaded into this
engine. Objects will be in the order that they were loaded.
" config() "
Returns the Perl::Critic::Config object that was created for or given to this Critic.
" statistics() "
Returns the Perl::Critic::Statistics object that was created for this Critic. The Statistics object
accumulates data for all files that are analyzed by this Critic.
FUNCTIONAL INTERFACE
For those folks who prefer to have a functional interface, The "critique" method can be exported on
request and called as a static function. If the first argument is a hashref, its contents are used to
construct a new Perl::Critic object internally. The keys of that hash should be the same as those
supported by the "Perl::Critic::new" method. Here are some examples:
use Perl::Critic qw(critique);
# Use default parameters...
@violations = critique( $some_file );
# Use custom parameters...
@violations = critique( {-severity => 2}, $some_file );
# As a one-liner
%> perl -MPerl::Critic=critique -e 'print critique(shift)' some_file.pm
None of the other object-methods are currently supported as static functions. Sorry.
CONFIGURATION
Most of the settings for Perl::Critic and each of the Policy modules can be controlled by a configuration
file. The default configuration file is called .perlcriticrc. Perl::Critic will look for this file in
the current directory first, and then in your home directory. Alternatively, you can set the
"PERLCRITIC" environment variable to explicitly point to a different file in another location. If none
of these files exist, and the "-profile" option is not given to the constructor, then all the modules
that are found in the Perl::Critic::Policy namespace will be loaded with their default configuration.
The format of the configuration file is a series of INI-style blocks that contain key-value pairs
separated by '='. Comments should start with '#' and can be placed on a separate line or after the name-
value pairs if you desire.
Default settings for Perl::Critic itself can be set before the first named block. For example, putting
any or all of these at the top of your configuration file will set the default value for the
corresponding constructor argument.
severity = 3 #Integer or named level
only = 1 #Zero or One
force = 0 #Zero or One
verbose = 4 #Integer or format spec
top = 50 #A positive integer
theme = (pbp || security) && bugs #A theme expression
include = NamingConventions ClassHierarchies #Space-delimited list
exclude = Variables Modules::RequirePackage #Space-delimited list
criticism-fatal = 1 #Zero or One
color = 1 #Zero or One
allow-unsafe = 1 #Zero or One
pager = less #pager to pipe output to
The remainder of the configuration file is a series of blocks like this:
[Perl::Critic::Policy::Category::PolicyName]
severity = 1
set_themes = foo bar
add_themes = baz
maximum_violations_per_document = 57
arg1 = value1
arg2 = value2
"Perl::Critic::Policy::Category::PolicyName" is the full name of a module that implements the policy.
The Policy modules distributed with Perl::Critic have been grouped into categories according to the table
of contents in Damian Conway's book Perl Best Practices. For brevity, you can omit the
'Perl::Critic::Policy' part of the module name.
"severity" is the level of importance you wish to assign to the Policy. All Policy modules are defined
with a default severity value ranging from 1 (least severe) to 5 (most severe). However, you may
disagree with the default severity and choose to give it a higher or lower severity, based on your own
coding philosophy. You can set the "severity" to an integer from 1 to 5, or use one of the equivalent
names:
SEVERITY NAME ...is equivalent to... SEVERITY NUMBER
----------------------------------------------------
gentle 5
stern 4
harsh 3
cruel 2
brutal 1
The names reflect how severely the code is criticized: a "gentle" criticism reports only the most severe
violations, and so on down to a "brutal" criticism which reports even the most minor violations.
"set_themes" sets the theme for the Policy and overrides its default theme. The argument is a string of
one or more whitespace-delimited alphanumeric words. Themes are case-insensitive. See "POLICY THEMES"
for more information.
"add_themes" appends to the default themes for this Policy. The argument is a string of one or more
whitespace-delimited words. Themes are case-insensitive. See "POLICY THEMES" for more information.
"maximum_violations_per_document" limits the number of Violations the Policy will return for a given
document. Some Policies have a default limit; see the documentation for the individual Policies to see
whether there is one. To force a Policy to not have a limit, specify "no_limit" or the empty string for
the value of this parameter.
The remaining key-value pairs are configuration parameters that will be passed into the constructor for
that Policy. The constructors for most Policy objects do not support arguments, and those that do should
have reasonable defaults. See the documentation on the appropriate Policy module for more details.
Instead of redefining the severity for a given Policy, you can completely disable a Policy by prepending
a '-' to the name of the module in your configuration file. In this manner, the Policy will never be
loaded, regardless of the "-severity" given to the Perl::Critic constructor.
A simple configuration might look like this:
#--------------------------------------------------------------
# I think these are really important, so always load them
[TestingAndDebugging::RequireUseStrict]
severity = 5
[TestingAndDebugging::RequireUseWarnings]
severity = 5
#--------------------------------------------------------------
# I think these are less important, so only load when asked
[Variables::ProhibitPackageVars]
severity = 2
[ControlStructures::ProhibitPostfixControls]
allow = if unless # My custom configuration
severity = cruel # Same as "severity = 2"
#--------------------------------------------------------------
# Give these policies a custom theme. I can activate just
# these policies by saying `perlcritic -theme larry`
[Modules::RequireFilenameMatchesPackage]
add_themes = larry
[TestingAndDebugging::RequireTestLables]
add_themes = larry curly moe
#--------------------------------------------------------------
# I do not agree with these at all, so never load them
[-NamingConventions::Capitalization]
[-ValuesAndExpressions::ProhibitMagicNumbers]
#--------------------------------------------------------------
# For all other Policies, I accept the default severity,
# so no additional configuration is required for them.
For additional configuration examples, see the perlcriticrc file that is included in this examples
directory of this distribution.
Damian Conway's own Perl::Critic configuration is also included in this distribution as
examples/perlcriticrc-conway.
THE POLICIES
A large number of Policy modules are distributed with Perl::Critic. They are described briefly in the
companion document Perl::Critic::PolicySummary and in more detail in the individual modules themselves.
Say "perlcritic -doc PATTERN" to see the perldoc for all Policy modules that match the regex
"m/PATTERN/ixms"
There are a number of distributions of additional policies on CPAN. If Perl::Critic doesn't contain a
policy that you want, some one may have already written it. See the "SEE ALSO" section below for a list
of some of these distributions.
POLICY THEMES
Each Policy is defined with one or more "themes". Themes can be used to create arbitrary groups of
Policies. They are intended to provide an alternative mechanism for selecting your preferred set of
Policies. For example, you may wish disable a certain subset of Policies when analyzing test programs.
Conversely, you may wish to enable only a specific subset of Policies when analyzing modules.
The Policies that ship with Perl::Critic have been broken into the following themes. This is just our
attempt to provide some basic logical groupings. You are free to invent new themes that suit your needs.
THEME DESCRIPTION
--------------------------------------------------------------------------
core All policies that ship with Perl::Critic
pbp Policies that come directly from "Perl Best Practices"
bugs Policies that that prevent or reveal bugs
certrec Policies that CERT recommends
certrule Policies that CERT considers rules
maintenance Policies that affect the long-term health of the code
cosmetic Policies that only have a superficial effect
complexity Policies that specificaly relate to code complexity
security Policies that relate to security issues
tests Policies that are specific to test programs
Any Policy may fit into multiple themes. Say "perlcritic -list" to get a listing of all available
Policies and the themes that are associated with each one. You can also change the theme for any Policy
in your .perlcriticrc file. See the "CONFIGURATION" section for more information about that.
Using the "-theme" option, you can create an arbitrarily complex rule that determines which Policies will
be loaded. Precedence is the same as regular Perl code, and you can use parentheses to enforce
precedence as well. Supported operators are:
Operator Altertative Example
-----------------------------------------------------------------
&& and 'pbp && core'
|| or 'pbp || (bugs && security)'
! not 'pbp && ! (portability || complexity)'
Theme names are case-insensitive. If the "-theme" is set to an empty string, then it evaluates as true
all Policies.
BENDING THE RULES
Perl::Critic takes a hard-line approach to your code: either you comply or you don't. In the real world,
it is not always practical (nor even possible) to fully comply with coding standards. In such cases, it
is wise to show that you are knowingly violating the standards and that you have a Damn Good Reason (DGR)
for doing so.
To help with those situations, you can direct Perl::Critic to ignore certain lines or blocks of code by
using annotations:
require 'LegacyLibaray1.pl'; ## no critic
require 'LegacyLibrary2.pl'; ## no critic
for my $element (@list) {
## no critic
$foo = ""; #Violates 'ProhibitEmptyQuotes'
$barf = bar() if $foo; #Violates 'ProhibitPostfixControls'
#Some more evil code...
## use critic
#Some good code...
do_something($_);
}
The "## no critic" annotations direct Perl::Critic to ignore the remaining lines of code until a "## use
critic" annotation is found. If the "## no critic" annotation is on the same line as a code statement,
then only that line of code is overlooked. To direct perlcritic to ignore the "## no critic"
annotations, use the "--force" option.
A bare "## no critic" annotation disables all the active Policies. If you wish to disable only specific
Policies, add a list of Policy names as arguments, just as you would for the "no strict" or "no warnings"
pragmas. For example, this would disable the "ProhibitEmptyQuotes" and "ProhibitPostfixControls"
policies until the end of the block or until the next "## use critic" annotation (whichever comes first):
## no critic (EmptyQuotes, PostfixControls)
# Now exempt from ValuesAndExpressions::ProhibitEmptyQuotes
$foo = "";
# Now exempt ControlStructures::ProhibitPostfixControls
$barf = bar() if $foo;
# Still subjected to ValuesAndExpression::RequireNumberSeparators
$long_int = 10000000000;
Since the Policy names are matched against the "## no critic" arguments as regular expressions, you can
abbreviate the Policy names or disable an entire family of Policies in one shot like this:
## no critic (NamingConventions)
# Now exempt from NamingConventions::Capitalization
my $camelHumpVar = 'foo';
# Now exempt from NamingConventions::Capitalization
sub camelHumpSub {}
The argument list must be enclosed in parentheses and must contain one or more comma-separated barewords
(e.g. don't use quotes). The "## no critic" annotations can be nested, and Policies named by an inner
annotation will be disabled along with those already disabled an outer annotation.
Some Policies like "Subroutines::ProhibitExcessComplexity" apply to an entire block of code. In those
cases, "## no critic" must appear on the line where the violation is reported. For example:
sub complicated_function { ## no critic (ProhibitExcessComplexity)
# Your code here...
}
Policies such as "Documentation::RequirePodSections" apply to the entire document, in which case
violations are reported at line 1.
Use this feature wisely. "## no critic" annotations should be used in the smallest possible scope, or
only on individual lines of code. And you should always be as specific as possible about which Policies
you want to disable (i.e. never use a bare "## no critic"). If Perl::Critic complains about your code,
try and find a compliant solution before resorting to this feature.
THE Perl::Critic PHILOSOPHY
Coding standards are deeply personal and highly subjective. The goal of Perl::Critic is to help you
write code that conforms with a set of best practices. Our primary goal is not to dictate what those
practices are, but rather, to implement the practices discovered by others. Ultimately, you make the
rules -- Perl::Critic is merely a tool for encouraging consistency. If there is a policy that you think
is important or that we have overlooked, we would be very grateful for contributions, or you can simply
load your own private set of policies into Perl::Critic.
EXTENDING THE CRITIC
The modular design of Perl::Critic is intended to facilitate the addition of new Policies. You'll need
to have some understanding of PPI, but most Policy modules are pretty straightforward and only require
about 20 lines of code. Please see the Perl::Critic::DEVELOPER file included in this distribution for a
step-by-step demonstration of how to create new Policy modules.
If you develop any new Policy modules, feel free to send them to "<jeff@imaginative-software.com>" and
I'll be happy to put them into the Perl::Critic distribution. Or if you would like to work on the
Perl::Critic project directly, check out our repository at <http://perlcritic.tigris.org>. To subscribe
to our mailing list, send a message to <mailto:dev-subscribe@perlcritic.tigris.org>.
The Perl::Critic team is also available for hire. If your organization has its own coding standards, we
can create custom Policies to enforce your local guidelines. Or if your code base is prone to a
particular defect pattern, we can design Policies that will help you catch those costly defects before
they go into production. To discuss your needs with the Perl::Critic team, just contact
"<jeff@imaginative-software.com>".
PREREQUISITES
Perl::Critic requires the following modules:
B::Keywords
Config::Tiny
Email::Address
Exception::Class
File::Spec
File::Spec::Unix
IO::String
List::MoreUtils
List::Util
Module::Pluggable
Perl::Tidy
Pod::Spell
PPI
Pod::PlainText
Pod::Select
Pod::Usage
Readonly
Scalar::Util
String::Format
Task::Weaken
Text::ParseWords
version
The following modules are optional, but recommended for complete functionality:
File::HomeDir
File::Which
CONTACTING THE DEVELOPMENT TEAM
You are encouraged to subscribe to the mailing list; send a message to
<mailto:users-subscribe@perlcritic.tigris.org>. See also the archives at
<http://perlcritic.tigris.org/servlets/SummarizeList?listName=users>. You can also contact the author at
"<jeff@imaginative-software.com>".
At least one member of the development team has started hanging around in
<irc://irc.perl.org/#perlcritic>.
You can also follow Perl::Critic on Twitter, at <https://twitter.com/perlcritic>.
SEE ALSO
There are a number of distributions of additional Policies available. A few are listed here:
Perl::Critic::More
Perl::Critic::Bangs
Perl::Critic::Lax
Perl::Critic::StricterSubs
Perl::Critic::Swift
Perl::Critic::Tics
These distributions enable you to use Perl::Critic in your unit tests:
Test::Perl::Critic
Test::Perl::Critic::Progressive
There is also a distribution that will install all the Perl::Critic related modules known to the
development team:
Task::Perl::Critic
If you want to make sure you have absolutely everything, you can use this:
Task::Perl::Critic::IncludingOptionalDependencies
BUGS
Scrutinizing Perl code is hard for humans, let alone machines. If you find any bugs, particularly false-
positives or false-negatives from a Perl::Critic::Policy, please submit them to
<https://github.com/Perl-Critic/Perl-Critic/issues>. Thanks.
Most policies will produce false-negatives if they cannot understand a particular block of code.
CREDITS
Adam Kennedy - For creating PPI, the heart and soul of Perl::Critic.
Damian Conway - For writing Perl Best Practices, finally :)
Chris Dolan - For contributing the best features and Policy modules.
Andy Lester - Wise sage and master of all-things-testing.
Elliot Shank - The self-proclaimed quality freak.
Giuseppe Maxia - For all the great ideas and positive encouragement.
and Sharon, my wife - For putting up with my all-night code sessions.
Thanks also to the Perl Foundation for providing a grant to support Chris Dolan's project to implement
twenty PBP policies. <http://www.perlfoundation.org/april_1_2007_new_grant_awards>
AUTHOR
Jeffrey Ryan Thalhammer <jeff@imaginative-software.com>
COPYRIGHT
Copyright (c) 2005-2011 Imaginative Software Systems. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl
itself. The full text of this license can be found in the LICENSE file included with this module.
perl v5.18.1 2013-11-03 Perl::Critic(3pm)