Provided by: libreadonly-perl_1.04-1_all 
NAME
Readonly - Facility for creating read-only scalars, arrays, hashes
Synopsis
use Readonly;
# Read-only scalar
Readonly::Scalar $sca => $initial_value;
Readonly::Scalar my $sca => $initial_value;
# Read-only array
Readonly::Array @arr => @values;
Readonly::Array my @arr => @values;
# Read-only hash
Readonly::Hash %has => (key => value, key => value, ...);
Readonly::Hash my %has => (key => value, key => value, ...);
# or:
Readonly::Hash %has => {key => value, key => value, ...};
# You can use the read-only variables like any regular variables:
print $sca;
$something = $sca + $arr[2];
next if $has{$some_key};
# But if you try to modify a value, your program will die:
$sca = 7;
push @arr, 'seven';
delete $has{key};
# The error message is "Modification of a read-only value attempted"
# Alternate form (Perl 5.8 and later)
Readonly $sca => $initial_value;
Readonly my $sca => $initial_value;
Readonly @arr => @values;
Readonly my @arr => @values;
Readonly %has => (key => value, key => value, ...);
Readonly my %has => (key => value, key => value, ...);
# Alternate form (for Perls earlier than v5.8)
Readonly \$sca => $initial_value;
Readonly \my $sca => $initial_value;
Readonly \@arr => @values;
Readonly \my @arr => @values;
Readonly \%has => (key => value, key => value, ...);
Readonly \my %has => (key => value, key => value, ...);
Description
This is a facility for creating non-modifiable variables. This is useful for
configuration files, headers, etc. It can also be useful as a development and debugging
tool, for catching updates to variables that should not be changed.
If any of the values you pass to "Scalar", "Array", or "Hash" are references, then those
functions recurse over the data structures, marking everything as Readonly. Usually, this
is what you want: the entire structure nonmodifiable. If you want only the top level to
be Readonly, use the alternate "Scalar1", "Array1" and "Hash1" functions.
Please note that most users of Readonly will also want to install a companion module
Readonly::XS. See the "Cons" section below for more details.
Comparison with "use constant"
Perl provides a facility for creating constant values, via the constant pragma. There are
several problems with this pragma.
• The constants created have no leading sigils.
• These constants cannot be interpolated into strings.
• Syntax can get dicey sometimes. For example:
use constant CARRAY => (2, 3, 5, 7, 11, 13);
$a_prime = CARRAY[2]; # wrong!
$a_prime = (CARRAY)[2]; # right -- MUST use parentheses
• You have to be very careful in places where barewords are allowed.
For example:
use constant SOME_KEY => 'key';
%hash = (key => 'value', other_key => 'other_value');
$some_value = $hash{SOME_KEY}; # wrong!
$some_value = $hash{+SOME_KEY}; # right
(who thinks to use a unary plus when using a hash?)
• "use constant" works for scalars and arrays, not hashes.
• These constants are global ot the package in which they're declared; cannot be lexically
scoped.
• Works only at compile time.
• Can be overridden:
use constant PI => 3.14159;
...
use constant PI => 2.71828;
(this does generate a warning, however, if you have warnings enabled).
• It is very difficult to make and use deep structures (complex data structures) with "use
constant".
Comparison with typeglob constants
Another popular way to create read-only scalars is to modify the symbol table entry for
the variable by using a typeglob:
*a = \'value';
This works fine, but it only works for global variables ("my" variables have no symbol
table entry). Also, the following similar constructs do not work:
*a = [1, 2, 3]; # Does NOT create a read-only array
*a = { a => 'A'}; # Does NOT create a read-only hash
Pros
Readonly.pm, on the other hand, will work with global variables and with lexical ("my")
variables. It will create scalars, arrays, or hashes, all of which look and work like
normal, read-write Perl variables. You can use them in scalar context, in list context;
you can take references to them, pass them to functions, anything.
Readonly.pm also works well with complex data structures, allowing you to tag the whole
structure as nonmodifiable, or just the top level.
Also, Readonly variables may not be reassigned. The following code will die:
Readonly::Scalar $pi => 3.14159;
...
Readonly::Scalar $pi => 2.71828;
Cons
Readonly.pm does impose a performance penalty. It's pretty slow. How slow? Run the
"eg/benchmark.pl" script that comes with Readonly. On my test system, "use constant",
typeglob constants, and regular read/write Perl variables were all about the same speed,
and Readonly.pm constants were about 1/20 the speed.
However, there is relief. There is a companion module available, Readonly::XS. If it is
installed on your system, Readonly.pm uses it to make read-only scalars much faster. With
Readonly::XS, Readonly scalars are as fast as the other types of variables. Readonly
arrays and hashes will still be relatively slow. But it's likely that most of your
Readonly variables will be scalars.
If you can't use Readonly::XS (for example, if you don't have a C compiler, or your perl
is statically linked and you don't want to re-link it), you have to decide whether the
benefits of Readonly variables outweigh the speed issue. For most configuration variables
(and other things that Readonly is likely to be useful for), the speed issue is probably
not really a big problem. But benchmark your program if it might be. If it turns out to
be a problem, you may still want to use Readonly.pm during development, to catch changes
to variables that should not be changed, and then remove it for production:
# For testing:
Readonly::Scalar $Foo_Directory => '/usr/local/foo';
Readonly::Scalar $Bar_Directory => '/usr/local/bar';
# $Foo_Directory = '/usr/local/foo';
# $Bar_Directory = '/usr/local/bar';
# For production:
# Readonly::Scalar $Foo_Directory => '/usr/local/foo';
# Readonly::Scalar $Bar_Directory => '/usr/local/bar';
$Foo_Directory = '/usr/local/foo';
$Bar_Directory = '/usr/local/bar';
Functions
Readonly::Scalar $var => $value;
Creates a nonmodifiable scalar, $var, and assigns a value of $value to it.
Thereafter, its value may not be changed. Any attempt to modify the value will cause
your program to die.
A value must be supplied. If you want the variable to have "undef" as its value, you
must specify "undef".
If $value is a reference to a scalar, array, or hash, then this function will mark the
scalar, array, or hash it points to as being Readonly as well, and it will recursively
traverse the structure, marking the whole thing as Readonly. Usually, this is what
you want. However, if you want only the $value marked as Readonly, use "Scalar1".
If $var is already a Readonly variable, the program will die with an error about
reassigning Readonly variables.
Readonly::Array @arr => (value, value, ...);
Creates a nonmodifiable array, @arr, and assigns the specified list of values to it.
Thereafter, none of its values may be changed; the array may not be lengthened or
shortened or spliced. Any attempt to do so will cause your program to die.
If any of the values passed is a reference to a scalar, array, or hash, then this
function will mark the scalar, array, or hash it points to as being Readonly as well,
and it will recursively traverse the structure, marking the whole thing as Readonly.
Usually, this is what you want. However, if you want only the hash %@arr itself
marked as Readonly, use "Array1".
If @arr is already a Readonly variable, the program will die with an error about
reassigning Readonly variables.
Readonly::Hash %h => (key => value, key => value, ...);
Readonly::Hash %h => {key => value, key => value, ...};
Creates a nonmodifiable hash, %h, and assigns the specified keys and values to it.
Thereafter, its keys or values may not be changed. Any attempt to do so will cause
your program to die.
A list of keys and values may be specified (with parentheses in the synopsis above),
or a hash reference may be specified (curly braces in the synopsis above). If a list
is specified, it must have an even number of elements, or the function will die.
If any of the values is a reference to a scalar, array, or hash, then this function
will mark the scalar, array, or hash it points to as being Readonly as well, and it
will recursively traverse the structure, marking the whole thing as Readonly.
Usually, this is what you want. However, if you want only the hash %h itself marked
as Readonly, use "Hash1".
If %h is already a Readonly variable, the program will die with an error about
reassigning Readonly variables.
Readonly $var => $value;
Readonly @arr => (value, value, ...);
Readonly %h => (key => value, ...);
Readonly %h => {key => value, ...};
The "Readonly" function is an alternate to the "Scalar", "Array", and "Hash"
functions. It has the advantage (if you consider it an advantage) of being one
function. That may make your program look neater, if you're initializing a whole
bunch of constants at once. You may or may not prefer this uniform style.
It has the disadvantage of having a slightly different syntax for versions of Perl
prior to 5.8. For earlier versions, you must supply a backslash, because it requires
a reference as the first parameter.
Readonly \$var => $value;
Readonly \@arr => (value, value, ...);
Readonly \%h => (key => value, ...);
Readonly \%h => {key => value, ...};
You may or may not consider this ugly.
Readonly::Scalar1 $var => $value;
Readonly::Array1 @arr => (value, value, ...);
Readonly::Hash1 %h => (key => value, key => value, ...);
Readonly::Hash1 %h => {key => value, key => value, ...};
These alternate functions create shallow Readonly variables, instead of deep ones.
For example:
Readonly::Array1 @shal => (1, 2, {perl=>'Rules', java=>'Bites'}, 4, 5);
Readonly::Array @deep => (1, 2, {perl=>'Rules', java=>'Bites'}, 4, 5);
$shal[1] = 7; # error
$shal[2]{APL}='Weird'; # Allowed! since the hash isn't Readonly
$deep[1] = 7; # error
$deep[2]{APL}='Weird'; # error, since the hash is Readonly
Examples
These are a few very simple examples:
Scalars
A plain old read-only value
Readonly::Scalar $a => "A string value";
The value need not be a compile-time constant:
Readonly::Scalar $a => $computed_value;
Arrays/Lists
A read-only array:
Readonly::Array @a => (1, 2, 3, 4);
The parentheses are optional:
Readonly::Array @a => 1, 2, 3, 4;
You can use Perl's built-in array quoting syntax:
Readonly::Array @a => qw/1 2 3 4/;
You can initialize a read-only array from a variable one:
Readonly::Array @a => @computed_values;
A read-only array can be empty, too:
Readonly::Array @a => ();
Readonly::Array @a; # equivalent
Hashes
Typical usage:
Readonly::Hash %a => (key1 => 'value1', key2 => 'value2');
A read-only hash can be initialized from a variable one:
Readonly::Hash %a => %computed_values;
A read-only hash can be empty:
Readonly::Hash %a => ();
Readonly::Hash %a; # equivalent
If you pass an odd number of values, the program will die:
Readonly::Hash %a => (key1 => 'value1', "value2");
# This dies with "May not store an odd number of values in a hash"
Exports
Historically, this module exports the "Readonly" symbol into the calling program's
namespace by default. The following symbols are also available for import into your
program, if you like: "Scalar", "Scalar1", "Array", "Array1", "Hash", and "Hash1".
Requirements
Readonly::XS is recommended but not required. There are no non-core requirements.
Bug Reports
If email is better for you, my address is mentioned below but I would rather have bugs
sent through the issue tracker found at http://github.com/sanko/readonly/issues.
Please check the TODO file included with this distribution in case your bug is already
known (...I probably won't file bug reports to myself).
Acknowladgements
Thanks to Slaven Rezic for the idea of one common function (Readonly) for all three types
of variables (13 April 2002).
Thanks to Ernest Lergon for the idea (and initial code) for deeply-Readonly data
structures (21 May 2002).
Thanks to Damian Conway for the idea (and code) for making the Readonly function work a
lot smoother under perl 5.8+.
Author
Sanko Robinson <sanko@cpan.org> - http://sankorobinson.com/
CPAN ID: SANKO
Original author: Eric J. Roode, roode@cpan.org
License and Legal
Copyright (C) 2013 by Sanko Robinson <sanko@cpan.org>
Copyright (c) 2001-2004 by Eric J. Roode. All Rights Reserved.
This module is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.