NAME

       SNMP::Info::Layer2::C1900 - SNMP Interface to data from Cisco Catalyst 1900 Network
       Switches running CatOS

AUTHOR

       Max Baker

SYNOPSIS

        # Let SNMP::Info determine the correct subclass for you.
        my $c1900 = new SNMP::Info(
                                 AutoSpecify => 1,
                                 Debug       => 1,
                                 DestHost    => 'myswitch',
                                 Community   => 'public',
                                 Version     => 1
                               )
           or die "Can't connect to DestHost.\n";

        my $class      = $c1900->class();
        print "SNMP::Info determined this device to fall under subclass : $class\n";

DESCRIPTION

       Provides abstraction to the configuration information obtainable from a Catalyst 1900
       device through SNMP.  See SNMP::Info for full documentation

       Note that most of these devices only talk SNMP version 1, but not all.

       For speed or debugging purposes you can call the subclass directly, but not after
       determining a more specific class using the method above.

        my $c1900 = new SNMP::Info::Layer2::C1900(...);

   Inherited classes
       SNMP::Info::CDP
       SNMP::Info::CiscoStats
       SNMP::Info::CiscoConfig
       SNMP::Info::Layer2

   Required MIBs
       STAND-ALONE-ETHERNET-SWITCH-MIB (ESSWITCH-MIB)
           ESSWITCH-MIB is included in the Version 1 MIBs from Cisco.

           They can be found at ftp://ftp.cisco.com/pub/mibs/v1/v1.tar.gz

   Inherited MIBs
       See "Required MIBs" in SNMP::Info::CDP for its MIB requirements.

       See "Required MIBs" in SNMP::Info::CiscoStats for its MIB requirements.

       See "Required MIBs" in SNMP::Info::CiscoConfig for its MIB requirements.

       See "Required MIBs" in SNMP::Info::Layer2 for its MIB requirements.

GLOBALS

       These are methods that return scalar value from SNMP

       $c1900->c1900_flash_status()
           Usually contains the version of the software loaded in flash.  Used by os_ver()

           "STAND-ALONE-ETHERNET-SWITCH-MIB::upgradeFlashBankStatus"

       $c1900->os()
           Returns 'catalyst'

       $c1900->os_ver()
           Returns CatOS version if obtainable.  First tries to use
           SNMP::Info::CiscoStats->os_ver() .  If that fails then it checks for the presence of
           $c1900->c1900_flash_status() and culls the version from there.

       $c1900->vendor()
           Returns 'cisco' :)

   Overrides
       $c1900->cisco_comm_indexing()
           Returns 1.  Use vlan indexing.

       $c1900->bulkwalk_no
           Return 1.  Bulkwalk is turned off for this class.

   Globals imported from SNMP::Info::CDP
       See "GLOBALS" in SNMP::Info::CDP for details.

   Globals imported from SNMP::Info::CiscoStats
       See "GLOBALS" in SNMP::Info::CiscoStats for details.

   Globals imported from SNMP::Info::CiscoConfig
       See "GLOBALS" in SNMP::Info::CiscoConfig for details.

   Globals imported from SNMP::Info::Layer2
       See "GLOBALS" in SNMP::Info::Layer2 for details.

TABLE METHODS

       These are methods that return tables of information in the form of a reference to a hash.

   Overrides
       $c1900->interfaces()
           Returns reference to the map between IID and physical Port.

       $c1900->i_duplex()
           Returns reference to map of IIDs to current link duplex

       $c1900->i_duplex_admin()
           Returns reference to hash of IIDs to admin duplex setting

       $c1900->i_name()
           Crosses "ifName" with $c1900->c1900_p_name() and returns the human set port name if
           exists.

       $c1900->i_vlan()
           Returns a mapping between the interface and the VLAN / bridge group if overlap is not
           enabled.

       $c1900->i_vlan_membership()
           Returns reference to hash of arrays: key = interface, value = array of VLAN / bridge
           group IDs.

             Example:
             my $interfaces = $c1900->interfaces();
             my $vlans      = $c1900->i_vlan_membership();

             foreach my $iid (sort keys %$interfaces) {
               my $port = $interfaces->{$iid};
               my $vlan = join(',', sort(@{$vlans->{$iid}}));
               print "Port: $port VLAN: $vlan\n";
             }

       $c1900->bp_index()
           Returns a bp_index that contains the original bp_index entries and extra entries for
           those interfaces listed in if_index, as some C1900 devices do not return complete
           bp_indexes.

   STAND-ALONE-ETHERNET-SWITCH-MIB Switch Port Table Entries:
       $c1900->c1900_p_index()
           Maps the Switch Port Table to the IID

           "swPortIfIndex"

       $c1900->c1900_p_duplex()
           Gives Port Duplex Info

           ("swPortDuplexStatus")

       $c1900->c1900_p_duplex_admin()
           Gives admin setting for Duplex Info

           ("swPortFullDuplex")

       $c1900->c1900_p_name()
           Gives human set name for port

           ("swPortName")

       $c1900->c1900_p_up_admin()
           Gives Admin status of port enabled.

           ("swPortAdminStatus")

       $c1900->c1900_p_type()
           Gives Type of port, i.e. "general-ethernet"

           ("swPortMediaCapability")

       $c1900->c1900_p_media()
           Gives the media of the port , i.e. ""fiber-sc""

           ("swPortConnectorType")

   Table Methods imported from SNMP::Info::CDP
       See "TABLE METHODS" in SNMP::Info::CDP for details.

   Table Methods imported from SNMP::Info::CiscoStats
       See "TABLE METHODS" in SNMP::Info::CiscoStats for details.

   Table Methods imported from SNMP::Info::CiscoConfig
       See "TABLE METHODS" in SNMP::Info::CiscoConfig for details.

   Table Methods imported from SNMP::Info::Layer2
       See "TABLE METHODS" in SNMP::Info::Layer2 for details.

SET METHODS

       These are methods that provide SNMP set functionality for overridden methods or provide a
       simpler interface to complex set operations.  See "SETTING DATA VIA SNMP" in SNMP::Info
       for general information on set operations.

       $c1900->set_i_duplex_admin(duplex, ifIndex)
           Sets port duplex, must be supplied with duplex and port "ifIndex".  Speed choices are
           'auto', 'half', 'full'.

             Example:
             my %if_map = reverse %{$c1900->interfaces()};
             $c1900->set_i_duplex_admin('auto', $if_map{'1'})
               or die "Couldn't change port duplex. ",$c1900->error(1);