Provided by: libscope-upper-perl_0.24-1_amd64 
NAME
Scope::Upper - Act on upper scopes.
VERSION
Version 0.24
SYNOPSIS
"reap", "localize", "localize_elem", "localize_delete" and "WORDS" :
package Scope;
use Scope::Upper qw<
reap localize localize_elem localize_delete
:words
>;
sub new {
my ($class, $name) = @_;
localize '$tag' => bless({ name => $name }, $class) => UP;
reap { print Scope->tag->name, ": end\n" } UP;
}
# Get the tag stored in the caller namespace
sub tag {
my $l = 0;
my $pkg = __PACKAGE__;
$pkg = caller $l++ while $pkg eq __PACKAGE__;
no strict 'refs';
${$pkg . '::tag'};
}
sub name { shift->{name} }
# Locally capture warnings and reprint them with the name prefixed
sub catch {
localize_elem '%SIG', '__WARN__' => sub {
print Scope->tag->name, ': ', @_;
} => UP;
}
# Locally clear @INC
sub private {
for (reverse 0 .. $#INC) {
# First UP is the for loop, second is the sub boundary
localize_delete '@INC', $_ => UP UP;
}
}
...
package UserLand;
{
Scope->new("top"); # initializes $UserLand::tag
{
Scope->catch;
my $one = 1 + undef; # prints "top: Use of uninitialized value..."
{
Scope->private;
eval { require Cwd };
print $@; # prints "Can't locate Cwd.pm in @INC
} # (@INC contains:) at..."
require Cwd; # loads Cwd.pm
}
} # prints "top: done"
"unwind" and "want_at" :
package Try;
use Scope::Upper qw<unwind want_at :words>;
sub try (&) {
my @result = shift->();
my $cx = SUB UP; # Point to the sub above this one
unwind +(want_at($cx) ? @result : scalar @result) => $cx;
}
...
sub zap {
try {
my @things = qw<a b c>;
return @things; # returns to try() and then outside zap()
# not reached
};
# not reached
}
my @stuff = zap(); # @stuff contains qw<a b c>
my $stuff = zap(); # $stuff contains 3
"uplevel" :
package Uplevel;
use Scope::Upper qw<uplevel CALLER>;
sub target {
faker(@_);
}
sub faker {
uplevel {
my $sub = (caller 0)[3];
print "$_[0] from $sub()";
} @_ => CALLER(1);
}
target('hello'); # "hello from Uplevel::target()"
"uid" and "validate_uid" :
use Scope::Upper qw<uid validate_uid>;
my $uid;
{
$uid = uid();
{
if ($uid eq uid(UP)) { # yes
...
}
if (validate_uid($uid)) { # yes
...
}
}
}
if (validate_uid($uid)) { # no
...
}
DESCRIPTION
This module lets you defer actions at run-time that will take place when the control flow
returns into an upper scope. Currently, you can:
• hook an upper scope end with "reap" ;
• localize variables, array/hash values or deletions of elements in higher contexts with
respectively "localize", "localize_elem" and "localize_delete" ;
• return values immediately to an upper level with "unwind", "yield" and "leave" ;
• gather information about an upper context with "want_at" and "context_info" ;
• execute a subroutine in the setting of an upper subroutine stack frame with "uplevel"
;
• uniquely identify contexts with "uid" and "validate_uid".
FUNCTIONS
In all those functions, $context refers to the target scope.
You have to use one or a combination of "WORDS" to build the $context passed to these
functions. This is needed in order to ensure that the module still works when your
program is ran in the debugger. The only thing you can assume is that it is an absolute
indicator of the frame, which means that you can safely store it at some point and use it
when needed, and it will still denote the original scope.
"reap"
reap { ... };
reap { ... } $context;
&reap($callback, $context);
Adds a destructor that calls $callback (in void context) when the upper scope represented
by $context ends.
"localize"
localize $what, $value;
localize $what, $value, $context;
Introduces a "local" delayed to the time of first return into the upper scope denoted by
$context. $what can be :
• A glob, in which case $value can either be a glob or a reference. "localize" follows
then the same syntax as "local *x = $value". For example, if $value is a scalar
reference, then the "SCALAR" slot of the glob will be set to $$value - just like
"local *x = \1" sets $x to 1.
• A string beginning with a sigil, representing the symbol to localize and to assign to.
If the sigil is '$', "localize" follows the same syntax as "local $x = $value", i.e.
$value isn't dereferenced. For example,
localize '$x', \'foo' => HERE;
will set $x to a reference to the string 'foo'. Other sigils ('@', '%', '&' and '*')
require $value to be a reference of the corresponding type.
When the symbol is given by a string, it is resolved when the actual localization
takes place and not when "localize" is called. Thus, if the symbol name is not
qualified, it will refer to the variable in the package where the localization
actually takes place and not in the one where the "localize" call was compiled. For
example,
{
package Scope;
sub new { localize '$tag', $_[0] => UP }
}
{
package Tool;
{
Scope->new;
...
}
}
will localize $Tool::tag and not $Scope::tag. If you want the other behaviour, you
just have to specify $what as a glob or a qualified name.
Note that if $what is a string denoting a variable that wasn't declared beforehand,
the relevant slot will be vivified as needed and won't be deleted from the glob when
the localization ends. This situation never arises with "local" because it only
compiles when the localized variable is already declared. Although I believe it
shouldn't be a problem as glob slots definedness is pretty much an implementation
detail, this behaviour may change in the future if proved harmful.
"localize_elem"
localize_elem $what, $key, $value;
localize_elem $what, $key, $value, $context;
Introduces a "local $what[$key] = $value" or "local $what{$key} = $value" delayed to the
time of first return into the upper scope denoted by $context. Unlike "localize", $what
must be a string and the type of localization is inferred from its sigil. The two only
valid types are array and hash ; for anything besides those, "localize_elem" will throw an
exception. $key is either an array index or a hash key, depending of which kind of
variable you localize.
If $what is a string pointing to an undeclared variable, the variable will be vivified as
soon as the localization occurs and emptied when it ends, although it will still exist in
its glob.
"localize_delete"
localize_delete $what, $key;
localize_delete $what, $key, $context;
Introduces the deletion of a variable or an array/hash element delayed to the time of
first return into the upper scope denoted by $context. $what can be:
• A glob, in which case $key is ignored and the call is equivalent to "local *x".
• A string beginning with '@' or '%', for which the call is equivalent to respectively
"local $a[$key]; delete $a[$key]" and "local $h{$key}; delete $h{$key}".
• A string beginning with '&', which more or less does "undef &func" in the upper scope.
It's actually more powerful, as &func won't even "exists" anymore. $key is ignored.
"unwind"
unwind;
unwind @values, $context;
Returns @values from the subroutine, eval or format context pointed by or just above
$context, and immediately restarts the program flow at this point - thus effectively
returning @values to an upper scope. If @values is empty, then the $context parameter is
optional and defaults to the current context (making the call equivalent to a bare
"return;") ; otherwise it is mandatory.
The upper context isn't coerced onto @values, which is hence always evaluated in list
context. This means that
my $num = sub {
my @a = ('a' .. 'z');
unwind @a => HERE;
# not reached
}->();
will set $num to 'z'. You can use "want_at" to handle these cases.
"yield"
yield;
yield @values, $context;
Returns @values from the context pointed by or just above $context, and immediately
restarts the program flow at this point. If @values is empty, then the $context parameter
is optional and defaults to the current context ; otherwise it is mandatory.
"yield" differs from "unwind" in that it can target any upper scope (besides a "s///e"
substitution context) and not necessarily a sub, an eval or a format. Hence you can use
it to return values from a "do" or a "map" block :
my $now = do {
local $@;
eval { require Time::HiRes } or yield time() => HERE;
Time::HiRes::time();
};
my @uniq = map {
yield if $seen{$_}++; # returns the empty list from the block
...
} @things;
Like for "unwind", the upper context isn't coerced onto @values. You can use the fifth
value returned by "context_info" to handle context coercion.
"leave"
leave;
leave @values;
Immediately returns @values from the current block, whatever it may be (besides a "s///e"
substitution context). "leave" is actually a synonym for "yield HERE", while "leave
@values" is a synonym for "yield @values, HERE".
Like for "yield", you can use the fifth value returned by "context_info" to handle context
coercion.
"want_at"
my $want = want_at;
my $want = want_at $context;
Like "wantarray" in perlfunc, but for the subroutine, eval or format context located at or
just above $context.
It can be used to revise the example showed in "unwind" :
my $num = sub {
my @a = ('a' .. 'z');
unwind +(want_at(HERE) ? @a : scalar @a) => HERE;
# not reached
}->();
will rightfully set $num to 26.
"context_info"
my ($package, $filename, $line, $subroutine, $hasargs,
$wantarray, $evaltext, $is_require, $hints, $bitmask,
$hinthash) = context_info $context;
Gives information about the context denoted by $context, akin to what "caller" in perlfunc
provides but not limited only to subroutine, eval and format contexts. When $context is
omitted, it defaults to the current context.
The returned values are, in order :
• (index 0) : the namespace in use when the context was created ;
• (index 1) : the name of the file at the point where the context was created ;
• (index 2) : the line number at the point where the context was created ;
• (index 3) : the name of the subroutine called for this context, or "undef" if this is
not a subroutine context ;
• (index 4) : a boolean indicating whether a new instance of @_ was set up for this
context, or "undef" if this is not a subroutine context ;
• (index 5) : the context (in the sense of "wantarray" in perlfunc) in which the context
(in our sense) is executed ;
• (index 6) : the contents of the string being compiled for this context, or "undef" if
this is not an eval context ;
• (index 7) : a boolean indicating whether this eval context was created by "require",
or "undef" if this is not an eval context ;
• (index 8) : the value of the lexical hints in use when the context was created ;
• (index 9) : a bit string representing the warnings in use when the context was created
;
• (index 10) : a reference to the lexical hints hash in use when the context was created
(only on perl 5.10 or greater).
"uplevel"
my @ret = uplevel { ...; return @ret };
my @ret = uplevel { my @args = @_; ...; return @ret } @args, $context;
my @ret = &uplevel($callback, @args, $context);
Executes the code reference $callback with arguments @args as if it were located at the
subroutine stack frame pointed by $context, effectively fooling "caller" and "die" into
believing that the call actually happened higher in the stack. The code is executed in
the context of the "uplevel" call, and what it returns is returned as-is by "uplevel".
sub target {
faker(@_);
}
sub faker {
uplevel {
map { 1 / $_ } @_;
} @_ => CALLER(1);
}
my @inverses = target(1, 2, 4); # @inverses contains (0, 0.5, 0.25)
my $count = target(1, 2, 4); # $count is 3
Note that if @args is empty, then the $context parameter is optional and defaults to the
current context ; otherwise it is mandatory.
Sub::Uplevel also implements a pure-Perl version of "uplevel". Both are identical, with
the following caveats :
• The Sub::Uplevel implementation of "uplevel" may execute a code reference in the
context of any upper stack frame. The Scope::Upper version can only uplevel to a
subroutine stack frame, and will croak if you try to target an "eval" or a format.
• Exceptions thrown from the code called by this version of "uplevel" will not be caught
by "eval" blocks between the target frame and the uplevel call, while they will for
Sub::Uplevel's version. This means that :
eval {
sub {
local $@;
eval {
sub {
uplevel { die 'wut' } CALLER(2); # for Scope::Upper
# uplevel(3, sub { die 'wut' }) # for Sub::Uplevel
}->();
};
print "inner block: $@";
$@ and exit;
}->();
};
print "outer block: $@";
will print "inner block: wut..." with Sub::Uplevel and "outer block: wut..." with
Scope::Upper.
• Sub::Uplevel globally overrides the Perl keyword "caller", while Scope::Upper does
not.
A simple wrapper lets you mimic the interface of "uplevel" in Sub::Uplevel :
use Scope::Upper;
sub uplevel {
my $frame = shift;
my $code = shift;
my $cxt = Scope::Upper::CALLER($frame);
&Scope::Upper::uplevel($code => @_ => $cxt);
}
Albeit the three exceptions listed above, it passes all the tests of Sub::Uplevel.
"uid"
my $uid = uid;
my $uid = uid $context;
Returns an unique identifier (UID) for the context (or dynamic scope) pointed by $context,
or for the current context if $context is omitted. This UID will only be valid for the
life time of the context it represents, and another UID will be generated next time the
same scope is executed.
my $uid;
{
$uid = uid;
if ($uid eq uid()) { # yes, this is the same context
...
}
{
if ($uid eq uid()) { # no, we are one scope below
...
}
if ($uid eq uid(UP)) { # yes, UP points to the same scope as $uid
...
}
}
}
# $uid is now invalid
{
if ($uid eq uid()) { # no, this is another block
...
}
}
For example, each loop iteration gets its own UID :
my %uids;
for (1 .. 5) {
my $uid = uid;
$uids{$uid} = $_;
}
# %uids has 5 entries
The UIDs are not guaranteed to be numbers, so you must use the "eq" operator to compare
them.
To check whether a given UID is valid, you can use the "validate_uid" function.
"validate_uid"
my $is_valid = validate_uid $uid;
Returns true if and only if $uid is the UID of a currently valid context (that is, it
designates a scope that is higher than the current one in the call stack).
my $uid;
{
$uid = uid();
if (validate_uid($uid)) { # yes
...
}
{
if (validate_uid($uid)) { # yes
...
}
}
}
if (validate_uid($uid)) { # no
...
}
CONSTANTS
"SU_THREADSAFE"
True iff the module could have been built when thread-safety features.
WORDS
Constants
"TOP"
my $top_context = TOP;
Returns the context that currently represents the highest scope.
"HERE"
my $current_context = HERE;
The context of the current scope.
Getting a context from a context
For any of those functions, $from is expected to be a context. When omitted, it defaults
to the current context.
"UP"
my $upper_context = UP;
my $upper_context = UP $from;
The context of the scope just above $from.
"SUB"
my $sub_context = SUB;
my $sub_context = SUB $from;
The context of the closest subroutine above $from. Note that $from is returned if it is
already a subroutine context ; hence "SUB SUB == SUB".
"EVAL"
my $eval_context = EVAL;
my $eval_context = EVAL $from;
The context of the closest eval above $from. Note that $from is returned if it is already
an eval context ; hence "EVAL EVAL == EVAL".
Getting a context from a level
Here, $level should denote a number of scopes above the current one. When omitted, it
defaults to 0 and those functions return the same context as "HERE".
"SCOPE"
my $context = SCOPE;
my $context = SCOPE $level;
The $level-th upper context, regardless of its type.
"CALLER"
my $context = CALLER;
my $context = CALLER $level;
The context of the $level-th upper subroutine/eval/format. It kind of corresponds to the
context represented by "caller $level", but while e.g. "caller 0" refers to the caller
context, "CALLER 0" will refer to the top scope in the current context.
Examples
Where "reap" fires depending on the $cxt :
sub {
eval {
sub {
{
reap \&cleanup => $cxt;
...
} # $cxt = SCOPE(0) = HERE
...
}->(); # $cxt = SCOPE(1) = UP = SUB = CALLER(0)
...
}; # $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1)
...
}->(); # $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
Where "localize", "localize_elem" and "localize_delete" act depending on the $cxt :
sub {
eval {
sub {
{
localize '$x' => 1 => $cxt;
# $cxt = SCOPE(0) = HERE
...
}
# $cxt = SCOPE(1) = UP = SUB = CALLER(0)
...
}->();
# $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1)
...
};
# $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
}->();
# $cxt = SCOPE(4), UP SUB UP SUB = UP SUB EVAL = UP CALLER(2) = TOP
...
Where "unwind", "yield", "want_at", "context_info" and "uplevel" point to depending on the
$cxt:
sub {
eval {
sub {
{
unwind @things => $cxt; # or yield @things => $cxt
# or uplevel { ... } $cxt
...
}
...
}->(); # $cxt = SCOPE(0) = SCOPE(1) = HERE = UP = SUB = CALLER(0)
...
}; # $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1) (*)
...
}->(); # $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
# (*) Note that uplevel() will croak if you pass that scope frame,
# because it cannot target eval scopes.
EXPORT
The functions "reap", "localize", "localize_elem", "localize_delete", "unwind", "yield",
"leave", "want_at", "context_info" and "uplevel" are only exported on request, either
individually or by the tags ':funcs' and ':all'.
The constant "SU_THREADSAFE" is also only exported on request, individually or by the tags
':consts' and ':all'.
Same goes for the words "TOP", "HERE", "UP", "SUB", "EVAL", "SCOPE" and "CALLER" that are
only exported on request, individually or by the tags ':words' and ':all'.
CAVEATS
Be careful that local variables are restored in the reverse order in which they were
localized. Consider those examples:
local $x = 0;
{
reap sub { print $x } => HERE;
local $x = 1;
...
}
# prints '0'
...
{
local $x = 1;
reap sub { $x = 2 } => HERE;
...
}
# $x is 0
The first case is "solved" by moving the "local" before the "reap", and the second by
using "localize" instead of "reap".
The effects of "reap", "localize" and "localize_elem" can't cross "BEGIN" blocks, hence
calling those functions in "import" is deemed to be useless. This is an hopeless case
because "BEGIN" blocks are executed once while localizing constructs should do their job
at each run. However, it's possible to hook the end of the current scope compilation with
B::Hooks::EndOfScope.
Some rare oddities may still happen when running inside the debugger. It may help to use
a perl higher than 5.8.9 or 5.10.0, as they contain some context-related fixes.
Calling "goto" to replace an "uplevel"'d code frame does not work :
• for a "perl" older than the 5.8 series ;
• for a "DEBUGGING" "perl" run with debugging flags set (as in "perl -D ...") ;
• when the runloop callback is replaced by another module.
In those three cases, "uplevel" will look for a "goto &sub" statement in its callback and,
if there is one, throw an exception before executing the code.
Moreover, in order to handle "goto" statements properly, "uplevel" currently has to suffer
a run-time overhead proportional to the size of the callback in every case (with a small
ratio), and proportional to the size of all the code executed as the result of the
"uplevel" call (including subroutine calls inside the callback) when a "goto" statement is
found in the "uplevel" callback. Despite this shortcoming, this XS version of "uplevel"
should still run way faster than the pure-Perl version from Sub::Uplevel.
DEPENDENCIES
perl 5.6.1.
A C compiler. This module may happen to build with a C++ compiler as well, but don't rely
on it, as no guarantee is made in this regard.
XSLoader (core since perl 5.6.0).
SEE ALSO
"local" in perlfunc, "Temporary Values via local()" in perlsub.
Alias, Hook::Scope, Scope::Guard, Guard.
Sub::Uplevel.
Continuation::Escape is a thin wrapper around Scope::Upper that gives you a continuation
passing style interface to "unwind". It's easier to use, but it requires you to have
control over the scope where you want to return.
Scope::Escape.
AUTHOR
Vincent Pit, "<perl at profvince.com>", <http://www.profvince.com>.
You can contact me by mail or on "irc.perl.org" (vincent).
BUGS
Please report any bugs or feature requests to "bug-scope-upper at rt.cpan.org", or through
the web interface at <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Scope-Upper>. I will
be notified, and then you'll automatically be notified of progress on your bug as I make
changes.
SUPPORT
You can find documentation for this module with the perldoc command.
perldoc Scope::Upper
Tests code coverage report is available at
<http://www.profvince.com/perl/cover/Scope-Upper>.
ACKNOWLEDGEMENTS
Inspired by Ricardo Signes.
Thanks to Shawn M. Moore for motivation.
COPYRIGHT & LICENSE
Copyright 2008,2009,2010,2011,2012,2013 Vincent Pit, all rights reserved.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.