trusty (3) Test::Aggregate.3pm.gz
NAME
Test::Aggregate - Aggregate "*.t" tests to make them run faster.
VERSION
Version 0.371
SYNOPSIS
use Test::Aggregate;
my $tests = Test::Aggregate->new( {
dirs => $aggregate_test_dir,
} );
$tests->run;
ok $some_data, 'Test::Aggregate also re-exports Test::More functions';
DESCRIPTION
WARNING: this is ALPHA code. The interface is not guaranteed to be stable. Further, check out
Test::Aggregate::Nested (included with this distribution). It's a more robust implementation which does
not have the same limitations as "Test::Aggregate".
A common problem with many test suites is that they can take a long time to run. The longer they run,
the less likely you are to run the tests. This module borrows a trick from "Apache::Registry" to load up
your tests at once, create a separate package for each test and wraps each package in a method named
"run_the_tests". This allows us to load perl only once and related modules only once. If you have
modules which are expensive to load, this can dramatically speed up a test suite.
DEPRECATION
For a whole variety of reasons, tests run in BEGIN/CHECK/INIT/INIT blocks are now deprecated. They cause
all sorts of test sequence headaches. Plus, they break the up-coming nested TAP work. You will have a
problem if you use this common idiom:
BEGIN {
use_ok 'My::Module' or die;
}
Instead, just "use" the module and put the "use_ok" tests in a t/load.t file or something similar and
don't aggregate it. See the following for more information: <http://use.perl.org/~Ovid/journal/38974>.
USAGE
Create a separate directory for your tests. This should not be a subdirectory of your regular test
directory. Write a small driver program and put it in your regular test directory ("t/" is the
standard):
use Test::Aggregate;
my $other_test_dir = 'aggregate_tests';
my $tests = Test::Aggregate->new( {
dirs => $other_test_dir
});
$tests->run;
ok $some_data, 'Test::Aggregate also re-exports Test::More functions';
Take your simplest tests and move them, one by one, into the new test directory and keep running the
"Test::Aggregate" program. You'll find some tests will not run in a shared environment like this. You
can either fix the tests or simply leave them in your regular test directory. See how this
distribution's tests are organized for an example.
Note that "Test::Aggregate" also exports all exported functions from "Test::More", allowing you to run
other tests after the aggregated tests have run.
use Test::Aggregate;
my $other_test_dir = 'aggregate_tests';
my $tests = Test::Aggregate->new( {
dirs => $other_test_dir
});
$tests->run;
ok !(-f 't/data/tmp.txt'), '... and our temp file should be deleted';
Some tests cannot run in an aggregate environment. These may include test for this with the
$ENV{TEST_AGGREGATE} variable:
package Some::Package;
BEGIN {
die __PACKAGE__ ." cannot run in aggregated tests"
if $ENV{TEST_AGGREGATE};
}
METHODS
"new"
my $tests = Test::Aggregate->new(
{
dirs => 'aggtests',
verbose => 1, # optional, but recommended
dump => 'dump.t', # optional
shuffle => 1, # optional
matching => qr/customer/, # optional
set_filenames => 0, # optional and not recommended
tidy => 1, # optional and experimental
test_nowarnings => 0, # optional and experimental
}
);
Creates a new "Test::Aggregate" instance. Accepts a hashref with the following keys:
• "dirs" (either this or "tests" is mandatory)
The directories to look in for the aggregated tests. This may be a scalar value of a single
directory or an array refernce of multiple directories.
• "tests" (either this or "dirs" is mandatory)
Instead of providing directories for the aggregated tests, you may supply an array reference with a
list of tests to aggregate. If both are supplied, these tests will be appended to the list of tests
found in "dirs".
The "matching" parameter does not apply to test files identified with this key.
• "verbose" (optional, but strongly recommended)
If set with a true value, each test programs success or failure will be indicated with a diagnostic
output. The output below means that "aggtests/slow_load.t" was an aggregated test which failed.
This means it's much easier to determine which aggregated tests are causing problems.
t/aggregate.........2/?
# ok - aggtests/boilerplate.t
# ok - aggtests/00-load.t
# not ok - aggtests/subs.t
# ok - aggtests/slow_load.t
t/aggregate.........ok
t/pod-coverage......ok
t/pod...............ok
Note that three possible values are allowed for "verbose":
• 0 (default)
No individual test program success or failure will be displayed.
• 1
Only failing test programs will have their failure status shown.
• 2
All test programs will have their success/failure shown.
• "dump" (optional)
You may list the name of a file to dump the aggregated tests to. This is useful if you have test
failures and need to debug why the tests failed.
• "shuffle" (optional)
Ordinarily, the tests are sorted by name and run in that order. This allows you to run them in any
order.
• "matching" (optional)
If supplied with a regular expression (requires the "qr" operator), will only run tests whose
filename matches the regular expression.
• "set_filenames" (optional)
If supplied with a true value, this will cause the following to be added for each test:
local $0 = $test_filename;
This is the default behavior.
• "findbin" (optional)
If supplied with a true value, this will cause FindBin::again() to be called before each test file.
This is turned off by default.
Note that older versions of FindBin (pre 1.47) sometimes get confused about where the bin directory
is when I set $0. I don't know why, but this is a rarely used option and only happens pre 5.8 perl,
so I'm not too worried about it. Just keep it in mind.
• "dry" (optional)
Just print the tests which will be run and the order they will be run in (obviously the order will be
random if "shuffle" is true).
• "tidy"
If supplied a true value, attempts to run "Perl::Tidy" on the source code. This is a no-op if
"Perl::Tidy" cannot be loaded. This option is "experimental". Plus, if your tests are terribly
convoluted, this could be slow and possibly buggy.
If the value of this argument is the name of a file, assumes that this file is a ".perltidyrc" file.
• "test_nowarnings"
Disables "Test::NoWarnings" (fails if the module cannot be loaded).
This is experimental and somewhat problematic. Let me know if there are any problems.
"run"
$tests->run;
Attempts to aggregate and run all tests listed in the directories specified in the constructor.
SETUP/TEARDOWN
Since "BEGIN" and "END" blocks are for the entire aggregated tests and not for each test program (see
"CAVEATS"), you might find that you need to have setup/teardown functions for tests. These are useful if
you need to setup connections to test databases, clear out temp files, or any of a variety of tasks that
your test suite might require. Here's a somewhat useless example, pulled from our tests:
#!/usr/bin/perl
use strict;
use warnings;
use lib 'lib', 't/lib';
use Test::Aggregate;
use Test::More;
my $dump = 'dump.t';
my ( $startup, $shutdown ) = ( 0, 0 );
my ( $setup, $teardown ) = ( 0, 0 );
my $tests = Test::Aggregate->new(
{
dirs => 'aggtests',
dump => $dump,
startup => sub { $startup++ },
shutdown => sub { $shutdown++ },
setup => sub { $setup++ },
teardown => sub { $teardown++ },
}
);
$tests->run;
is $startup, 1, 'Startup should be called once';
is $shutdown, 1, '... as should shutdown';
is $setup, 4, 'Setup should be called once for each test program';
is $teardown, 4, '... as should teardown';
Note that you can still dump these to a dump file. This will only work if "Data::Dump::Streamer" 1.11 or
later is installed.
There are four attributes which can be passed to the constructor, each of which expects a code reference:
• "startup"
startup => \&connect_to_database,
This function will be called before any of the tests are run. It is not run in a BEGIN block.
• "shutdown"
shutdown => \&clean_up_temp_files,
This function will be called after all of the tests are run. It will not be called in an END block.
• "setup"
setup => sub {
my $filename = shift;
# this gets run before each test program.
},
The setup function will be run before every test program. The name of the test file will be passed
as the first argument.
• "teardown"
teardown => sub {
my $filename = shift;
# this gets run after every test program.
}
The teardown function gets run after every test program. The name of the test file will be passed as
the first argument.
GLOBAL VARIABLES
You shouldn't be using global variables and a dependence on them can break your code. However, Perl
provides quite a few handy global variables which, unfortunately, can easily break your tests if you
change them in one test and another assumes an unchanged value. As a result, we localize many of Perl's
most common global variables for you, using the following syntax:
local %ENV = %ENV;
The following global variables are localized for you. Any others must be localized manually per test.
• @INC
• %ENV
• %SIG
• $/
• $_
• $|
CAVEATS
Not all tests can be included with this technique. If you have "Test::Class" tests, there is no need to
run them with this. Otherwise:
• "exit"
Don't call exit() in your aggregated tests. We now warn very verbosely if this is done, but we still
exit on the assumption that further tests cannot run.
• "__END__" and "__DATA__" tokens.
These won't work and the tests will call BAIL_OUT() if these tokens are seen. However, this
limitation does not apply to Test::Aggregate::Nested.
• "BEGIN" and "END" blocks.
Since all of the tests are aggregated together, "BEGIN" and "END" blocks will be for the scope of the
entire set of aggregated tests. If you need setup/teardown facilities, see "TEARDOWN" in SETUP.
• Syntax errors
Any syntax errors encountered will cause this program to BAIL_OUT(). This is why it's recommended
that you move your tests into your new directory one at a time: it makes it easier to figure out
which one has caused the problem.
• "no_plan"
Unfortunately, due to how this works, the plan is always "no_plan".
<http://groups.google.com/group/perl.qa/browse_thread/thread/d58c49db734844f4/cd18996391acc601?#cd18996391acc601>
for more information.
• "Test::NoWarnings"
Great module. It loves to break aggregated tests since some might have warnings when others will
not. You can disable it like this:
my $tests = Test::Aggregate->new(
dirs => 'aggtests/',
startup => sub { $INC{'Test/NoWarnings.pm'} = 1 },
);
As an alternative, you can also disable it with:
my $tests = Test::Aggregate->new({
dirs => 'aggtests',
test_nowarnings => 0,
});
We do work internally to subtract the extra test added by "Test::NoWarnings". It's painful and
experimental. Good luck.
• "Variable "$x" will not stay shared at (eval ..."
Because each test is wrapped in a method call, any of your subs which access a variable in an outer
scope will likely throw the above warning. Pass in arguments explicitly to suppress this.
Instead of:
my $x = 17;
sub foo {
my $y = shift;
return $y + $x;
}
Write this:
my $x = 17;
sub foo {
my ( $y, $x ) = @_;
return $y + $x;
}
However, consider Test::Aggregate::Nested. This warning does not apply with that module.
• Singletons
Be very careful of code which loads singletons. Oftimes those singletons in test suites may be
altered for testing purposes, but later attempts to use those singletons can fail dramatically as
they're not expecting the alterations. (Your author has painfully learned this lesson with database
connections).
DEBUGGING AGGREGATE TESTS
Before aggregating tests, make sure that you add tests one at a time to the aggregated test directory.
Attempting to add many tests to the directory at once and then experiencing a failure means it will be
much harder to track down which tests caused the failure.
Debugging aggregated tests which fail is a multi-step process. Let's say the following fails:
my $tests = Test::Aggregate->new(
{
dump => 'dump.t',
shuffle => 1,
dirs => 'aggtests',
}
);
$tests->run;
Manually run the tests
The first step is to manually run all of the tests in the "aggtests" dir.
prove -r aggtests/
If the failures appear the same, fix them just like you would fix any other test failure and then rerun
the "Test::Aggregate" code.
Sometimes this means that a different number of tests run from what the aggregted tests run. Look for
code which ends the program prematurely, such as an exception or an "exit" statement.
Run a dump file
If this does not fix your problem, create a dump file by passing "dump => $dumpfile" to the constructor
(as in the above example). Then try running this dumpfile directly to attempt to replicate the error:
prove -r $dumpfile
Tweaking the dump file
Assuming the error has been replicated, open up the dump file. The beginning of the dump file will have
some code which overrides some "Test::Builder" internals. After that, you'll see the code which runs the
tests. It will look similar to this:
if ( __FILE__ eq 'dump.t' ) {
Test::More::diag("******** running tests for aggtests/boilerplate.t ********")
if $ENV{TEST_VERBOSE};
aggtestsboilerplatet->run_the_tests;
Test::More::diag("******** running tests for aggtests/subs.t ********")
if $ENV{TEST_VERBOSE};
aggtestssubst->run_the_tests;
Test::More::diag("******** running tests for aggtests/00-load.t ********")
if $ENV{TEST_VERBOSE};
aggtests00loadt->run_the_tests;
Test::More::diag("******** running tests for aggtests/slow_load.t ********")
if $ENV{TEST_VERBOSE};
aggtestsslow_loadt->run_the_tests;
}
You can try to narrow down the problem by commenting out all of the "run_the_tests" lines and gradually
reintroducing them until you can figure out which one is actually causing the failure.
COMMON PITFALLS
My Tests Threw an Exception But Passed Anyway!
This really isn't a "Test::Aggregate" problem so much as a general Perl problem. For each test file,
"Test::Aggregate" wraps the tests in an eval and checks "my $error = $@". Unfortunately, we sometimes
get code like this:
$server->ip_address('apple');
And internally, the 'Server' class throws an exception but uses its own evals in a "DESTROY" block (or
something similar) to trap it. If the code you call uses an eval but fails to localize it, it wipes out
your eval. Neat, eh? Thus, you never get a chance to see the error. For various reasons, this tends to
impact "Test::Aggregate" when a "DESTROY" block is triggered and calls code which internally uses eval
(e.g., "DBIx::Class"). You can often fix this with:
DESTROY {
local $@ = $@; # localize but preserve the value
my $self = shift;
# do whatever you want
}
"BEGIN" and "END" blocks
Remember that since the tests are now being run at once, these blocks will no longer run on a per-test
basis, but will run for the entire aggregated set of tests. You may need to examine these individually
to determine the problem.
"CHECK" and "INIT" blocks.
Sorry, but you can't use these (just as in modperl). See perlmod for more information about them and why
they won't work.
"Test::NoWarnings"
This is a great test module. When aggregating tests together, however, it can cause pain as you'll often
discover warnings that you never new existed. For a quick fix, add this before you attempt to run your
tests:
$INC{'Test/NoWarnings.pm'} = 1;
That will disable "Test::NoWarnings", but you'll want to go in later to fix them.
Paths
Many tests make assumptions about the paths to files and moving them into a new test directory can break
this.
$0
Tests which use $0 can be problematic as the code is run in an "eval" through "Test::Aggregate" and $0
may not match expectations. This also means that it can behave differently if run directly from a dump
file.
As it turns out, you can assign to $0! We do this by default and set the $0 to the correct filename. If
you don't want this behavior, pass "set_filenames => 0" to the constructor.
Minimal test case
If you cannot solve the problem, feel free to try and create a minimal test case and send it to me
(assuming it's something I can run).
AUTHOR
Curtis Poe, "<ovid at cpan.org>"
BUGS
Please report any bugs or feature requests to "bug-test-aggregate at rt.cpan.org", or through the web
interface at <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Test-Aggregate>. I will be notified, and
then you'll automatically be notified of progress on your bug as I make changes.
SUPPORT
You can find documentation for this module with the perldoc command.
perldoc Test::Aggregate
You can also find information oneline:
<http://metacpan.org/release/Test-Aggregate>
ACKNOWLEDGEMENTS
Many thanks to mauzo (<http://use.perl.org/~mauzo/> for helping me find the 'skip_all' bug. Thanks to Johan Lindstroem for pointing me to Apache::Registry.
COPYRIGHT & LICENSE
Copyright 2007 Curtis "Ovid" Poe, all rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.