NAME

       Vend::Payment::MCVE - Interchange MCVE support

SYNOPSIS

           &charge=mcve

               or

           [charge mode=mcve param1=value1 param2=value2]

               or

           mcve($mode, $opt);

PREREQUISITES

           MCVE.pm

       The MCVE libraries are available free at http://www.mcve.com/

DESCRIPTION

       MCVE, Mainstreet Credit Verification Engine is a high performance software application
       designed to provide quality, in-house, Credit Card processing FROM Linux, FreeBSD,
       OpenBSD, IBM AIX, Sun Solaris, SCO OpenServer/UnixWare, and Mac OS X platforms to
       established clearing houses.  The MCVE C & Perl library software can be downloaded free of
       charge from http://mcve.com.  This module was developed and tested with the server
       software installed on HotConnect.net (http://www.hotconnect.net).  Hot Connect, Inc. is an
       Interchange friendly Web Hosting, E-Commerce, and Internet Services company.

       The Vend::Payment::MCVE module implements the mcve() routine for use with Interchange. It
       is compatible on a call level with the other Interchange payment modules.

       To enable this module, place this directive in "interchange.cfg":

           Require module Vend::Payment::MCVE

       This must be in interchange.cfg or a file included from it.

       Make sure CreditCardAuto is off (default in Interchange demos).

       The mode can be named anything, but the "gateway" parameter must be set to "mcve". To make
       it the default payment gateway for all credit card transactions in a specific catalog, you
       can set in "catalog.cfg":

           Variable   MV_PAYMENT_MODE  mcve

       It uses several of the standard settings from Interchange payment. Any time we speak of a
       setting, it is obtained either first from the tag/call options, then from an Interchange
       order Route named for the mode, then finally a default global payment variable, For
       example, the "id" parameter would be specified by:

           [charge mode=mcve name=mcve_configname]

       or

           Route mcve name mcve_configname

       or

           Variable MV_PAYMENT_NAME      mcve_configname

       The active settings are:

           Variable   MV_PAYMENT_MODE mcve
           Variable   MV_PAYMENT_NAME mcve_username
           Variable   MV_PAYMENT_PASSWD mcve_password
           Variable   MV_PAYMENT_HOST sv1.carlc.com
           Variable   MV_PAYMENT_PORT 8333
           Variable   MV_PAYMENT_COUNTER etc/mcve_id.counter
           Variable   MV_PAYMENT_COUNTER_START 100
           Variable   MV_PAYMENT_SALE_ON_AUTH 1
           Variable   MV_PAYMENT_NO_SALE_BAD_AVS 0
           Variable   MV_PAYMENT_NO_SALE_BAD_CVV2 0
           Variable   MV_PAYMENT_SUCCESS_ON_ANY 0

       name
           Your MCVE configuration username, set up when MCVE was configured/installed on the
           machine. Global parameter is MV_PAYMENT_NAME.

       no_sale_bad_avs
           Normally Interchange charge modules do an authorization, and if successful, do a sale.
           This module is configurable for a different models, where transactions are not
           automatically saled.

       sale_on_auth
           The storekeeper may not wish to sale a transaction if the AVS is bad.

       success_on_any
           Alternatively the storekeeper may wish to cause any transaction to appear to be a
           successful sale.  The storekeeper would have to contact buyers with bad credit card
           information and manually redo the sale.  The motivation is to make sure no one
           attempts a sale and gives up for any reason.   This mode of operation, set with
           MV_PAYMENT_SUCCESS_ON_ANY is not commonly used.

       transaction
           The type of transaction to be run. Valid values are:

               Interchange mode    MCVE mode
               ----------------    -----------------
               auth                auth
               sale                sale

           Not supported yet:

               return              return
               reverse             reverse
               void                void

       counter, counter_start
           Currently this is not being used, and Interchange is generating id's.

               Route   mcve  counter        etc/mcve_id.counter
               Route   mcve  counter_start  100

   Troubleshooting
       Try the instructions above, with a test credit card number from your payment processor.

       Then try a sale with the card number "4111 1111 1111 1111" and a valid expiration date.
       The sale should be denied, and the reason should be in [data session payment_error].

       If nothing works:

       Make sure you "Require"d the module in interchange.cfg:

           Require module Vend::Payment::MCVE

       Make sure MCVE is installed and working.

       Check the error logs, both catalog and global.

       Make sure you set your payment parameters properly.

       Try an order, then put this code in a page:

           [calc]
               $Tag->uneval( { ref => $Session->{payment_result} );
           [/calc]

       That should show what happened.

BUGS

       There is actually nothing *in* Vend::Payment::MCVE. It changes packages to Vend::Payment
       and places things there.

AUTHORS

       MCVE modifications by tom@readyink.com for Carlc Internet Services

CREDITS

       Derived from CCVS.pm template, and others.