Provided by: libwww-curl-perl_4.15-1build3_amd64 
NAME
WWW::Curl - Perl extension interface for libcurl
SYNOPSIS
use WWW::Curl;
print $WWW::Curl::VERSION;
DESCRIPTION
WWW::Curl is a Perl extension interface for libcurl.
DOCUMENTATION
This module provides a Perl interface to libcurl. It is not intended to be a standalone
module and because of this, the main libcurl documentation should be consulted for API
details at <http://curl.haxx.se>. The documentation you're reading right now only contains
the Perl specific details, some sample code and the differences between the C API and the
Perl one.
WWW::Curl::Easy
The name might be confusing, it originates from libcurl. This is not an ::Easy module in
the sense normally used on CPAN.
Here is a small snippet of making a request with WWW::Curl::Easy.
use strict;
use warnings;
use WWW::Curl::Easy;
my $curl = WWW::Curl::Easy->new;
$curl->setopt(CURLOPT_HEADER,1);
$curl->setopt(CURLOPT_URL, 'http://example.com');
# A filehandle, reference to a scalar or reference to a typeglob can be used here.
my $response_body;
$curl->setopt(CURLOPT_WRITEDATA,\$response_body);
# Starts the actual request
my $retcode = $curl->perform;
# Looking at the results...
if ($retcode == 0) {
print("Transfer went ok\n");
my $response_code = $curl->getinfo(CURLINFO_HTTP_CODE);
# judge result and next action based on $response_code
print("Received response: $response_body\n");
} else {
# Error code, type of error, error message
print("An error happened: $retcode ".$curl->strerror($retcode)." ".$curl->errbuf."\n");
}
See curl_easy_setopt(3) for details of "setopt()".
WWW::Curl::Multi
use strict;
use warnings;
use WWW::Curl::Easy;
use WWW::Curl::Multi;
my %easy;
my $curl = WWW::Curl::Easy->new;
my $curl_id = '13'; # This should be a handle unique id.
$easy{$curl_id} = $curl;
my $active_handles = 0;
$curl->setopt(CURLOPT_PRIVATE,$curl_id);
# do the usual configuration on the handle
...
my $curlm = WWW::Curl::Multi->new;
# Add some easy handles
$curlm->add_handle($curl);
$active_handles++;
while ($active_handles) {
my $active_transfers = $curlm->perform;
if ($active_transfers != $active_handles) {
while (my ($id,$return_value) = $curlm->info_read) {
if ($id) {
$active_handles--;
my $actual_easy_handle = $easy{$id};
# do the usual result/error checking routine here
...
# letting the curl handle get garbage collected, or we leak memory.
delete $easy{$id};
}
}
}
}
This interface is different than what the C API does. $curlm->perform is non-blocking and
performs requests in parallel. The method does a little work and then returns control,
therefor it has to be called periodically to get the job done. It's return value is the
number of unfinished requests.
When the number of unfinished requests changes compared to the number of active handles,
$curlm->info_read should be checked for finished requests. It returns one handle and it's
return value at a time, or an empty list if there are no more finished requests.
$curlm->info_read calls remove_handle on the given easy handle automatically, internally.
The easy handle will still remain available until it goes out of scope, this action just
detaches it from multi.
Please make sure that the easy handle does not get garbage collected until after the multi
handle finishes processing it, or bad things happen.
The multi handle does not need to be cleaned up, when it goes out of scope it calls the
required cleanup methods automatically.
It is possible to use $curlm->add_handle to add further requests to be processed after
$curlm->perform has been called. WWW::Curl::Multi doesn't care about the order. It is
possible to process all requests for a multi handle and then add a new batch of easy
handles for processing.
WWW::Curl::Share
use WWW::CURL::Share;
my $curlsh = new WWW::Curl::Share;
$curlsh->setopt(CURLSHOPT_SHARE, CURL_LOCK_DATA_COOKIE);
$curlsh->setopt(CURLSHOPT_SHARE, CURL_LOCK_DATA_DNS);
$curl->setopt(CURLOPT_SHARE, $curlsh);
$curlsh->setopt(CURLSHOPT_UNSHARE, CURL_LOCK_DATA_COOKIE);
$curlsh->setopt(CURLSHOPT_UNSHARE, CURL_LOCK_DATA_DNS);
WWW::Curl::Share is an extension to WWW::Curl::Easy which makes it possible to use a
single cookies/dns cache for several Easy handles.
It's usable methods are:
$curlsh = new WWW::Curl::Share
This method constructs a new WWW::Curl::Share object.
$curlsh->setopt(CURLSHOPT_SHARE, $value );
Enables share for:
CURL_LOCK_DATA_COOKIE use single cookies database
CURL_LOCK_DATA_DNS use single DNS cache
$curlsh->setopt(CURLSHOPT_UNSHARE, $value );
Disable share for given $value (see CURLSHOPT_SHARE)
$curlsh->strerror( ErrNo )
This method returns a string describing the CURLSHcode error
code passed in the argument errornum.
This is how you enable sharing for a specific WWW::Curl::Easy handle:
$curl->setopt(CURLOPT_SHARE, $curlsh)
Attach share object to WWW::Curl::Easy instance
WWW::Curl::Form
use WWW::Curl::Form;
my $curlf = WWW::Curl::Form->new;
$curlf->formaddfile($filename, 'attachment', "multipart/form-data");
$curlf->formadd("FIELDNAME", "VALUE");
$curl->setopt(CURLOPT_HTTPPOST, $curlf);
Its usable methods are:
$curlf = new WWW::Curl::Form
This method constructs a new WWW::Curl::Form object.
$curlf->formadd(FIELDNAME, VALUE)
This method adds a field with a given value, to the form that is being submitted.
$curlf->formaddfile(FILENAME, DESCRIPTION, TYPE)
This method will add a file to the form. The description is the name of the field
that you form expects the data to be submitted in.
COMPATIBILITY
curl_easy_setopt
Most of the options should work, however some might not. Please send reports, tests
and patches to fix those.
curl_easy_escape
Not implemented. Since equivalent Perl code is easily produced, this method will only
made available for interface completeness, if ever.
curl_easy_init
Used only internally. The standard Perl way of initializing an object should be used,
"my $curl = WWW::Curl::Easy->new;".
curl_easy_cleanup
Used only internally. Curl object cleanup happens when the handle goes out of scope.
curl_easy_duphandle
Should be working for most cases, however do not change the value of options which
accept a list/arrayref value on a duped handle, otherwise memory leaks or crashes will
happen. This behaviour will be fixed in the future.
curl_easy_pause
Not implemented.
curl_easy_reset
Not implemented.
curl_easy_unescape
Not implemented. Trivial Perl replacements are available.
curl_escape
Not implemented and won't be as this method is considered deprecated.
curl_formadd
Seems to be working.
curl_formaddfile
Seems to be working.
curl_formfree
Used internally. Not exposed through the public API, as this call has no relevance to
Perl code.
curl_free
Used internally. Not exposed through the public API, as this call has no relevance to
Perl code.
curl_getdate
Not implemented. This function is easily replaced by Perl code and as such, most
likely it won't be implemented.
curl_global_cleanup
Only used internally, not exposed through the public API.
curl_global_init
Only used internally, not exposed through the public API.
curl_global_init_mem
Not implemented.
curl_global_cleanup
Only used internally and called automatically upon exit.
curl_slist_append
Only used internally, not exposed through the public API.
curl_slist_free_all
Only used internally, not exposed through the public API.
curl_unescape
Not implemented and won't be, as this method is considered deprecated.
curl_version
Seems to work.
curl_version_info
Not yet implemented.
curl_multi_*
Most methods are either not exposed through the WWW::Curl::Multi API or they behave
differently than it's C counterpart. Please see the section about WWW::Curl::Multi
above.
curl_multi_fdset
This method returns three arrayrefs: the read, write and exception fds libcurl knows
about. In the case of no file descriptors in the given set, an empty array is
returned.
NUANCES
Header output for redirects
It might be surprising that if "CURLOPT_FOLLOWLOCATION" is set and header output was
enabled, headers show up for all http responses. The reasoning behind that and possible
code adjustments are outlined here: <https://rt.cpan.org/Ticket/Display.html?id=61569>.
CURLOPT_PRIVATE
Despite what the libcurl manual says, in Perl land, only string values are suitable for
this option.
ADDITIONAL METHODS
On WWW::Curl::Easy objects
pushopt
Like "setopt" but instead of overriding any previously set values it adds it to the
end. Can be used with "CURLOPT_HTTPHEADER", "CURLOPT_QUOTE" and "CURLOPT_POSTQUOTE".
USAGE CASES
WWW::Curl is a thin binding on top of libcurl, to make using libcurl possible from Perl
land. Because of this, the module is less like Perl and more like C in coding style.
There is a new module, <http://search.cpan.org/perldoc?WWW::Curl::Simple>, which wraps
this module into a more Perlish and userfriendly package.
The standard Perl WWW module, LWP should probably be used in most cases to work with HTTP
or FTP from Perl. However, there are some cases where LWP doesn't perform well. One is
speed and the other is parallelism. WWW::Curl is much faster, uses much less CPU cycles
and it's capable of non-blocking parallel requests.
In some cases, for example when building a web crawler, cpu usage and parallel downloads
are important considerations. It can be desirable to use WWW::Curl to do the heavy-lifting
of a large number of downloads and wrap the resulting data into a Perl-friendly structure
by HTTP::Response or use WWW::Curl::Simple to do that for you.
CHANGES
Version 4.01 - 4.07 adds several bugfixes and extends functionality coverage. See Changes
file.
Version 4.00 added new documentation, the build system changed to Module::Install, the
test suite was rewritten to use Test::More, a new calling syntax for WWW::Curl::Multi was
added, memory leak and other bugfixes added, Perl 5.6 and libcurl 7.10.8 as minimum
requirements for this module were set.
Version 3.12 is a bugfix for a missing Share.pm.in file in the release.
Version 3.11 added WWW::Curl::Share.
Version 3.10 adds the WWW::Curl::Share interface by Anton Federov and large file options
after a contribution from Mark Hindley.
Version 3.02 adds some backwards compatibility for scripts still using 'WWW::Curl::easy'
names.
Version 3.01 added some support for pre-multi versions of libcurl.
Version 3.00 adds WWW::Curl::Multi interface, and new module names following perl
conventions (WWW::Curl::Easy rather than WWW::Curl::easy), by Sebastian Riedel <sri at
cpan.org>.
Version 2.00 of WWW::Curl::easy is a renaming of the previous version (named Curl::easy),
to follow CPAN naming guidelines, by Cris Bailiff.
Versions 1.30, a (hopefully) threadable, object-oriented, multiple-callback compatible
version of Curl::easy was substantially reworked from the previous Curl::easy release
(1.21) by Cris Bailiff.
AUTHORS
Currently maintained by Cris Bailiff <c.bailiff+curl at devsecure.com> and Balint
Szilakszi <szbalint at cpan.org>.
Original Author Georg Horn <horn@koblenz-net.de>, with additional callback, pod and test
work by Cris Bailiff <c.bailiff+curl@devsecure.com> and Forrest Cahoon
<forrest.cahoon@merrillcorp.com>. Sebastian Riedel added ::Multi and Anton Fedorov
(datacompboy <at> mail.ru) added ::Share. Balint Szilakszi repackaged the module into a
more modern form.
COPYRIGHT
Copyright (C) 2000-2005,2008-2010 Daniel Stenberg, Cris Bailiff, Sebastian Riedel, Balint
Szilakszi et al.
You may opt to use, copy, modify, merge, publish, distribute and/or sell copies of the
Software, and permit persons to whom the Software is furnished to do so, under the terms
of the MPL or the MIT/X-derivate licenses. You may pick one of these licenses.
SEE ALSO
<http://curl.haxx.se>
<http://search.cpan.org/perldoc?WWW::Curl::Simple>
libcurl(3)
The development source code is also available:
<http://github.com/szbalint/WWW--Curl/tree/master>