Ubuntu Manpage: X11::Protocol::Ext::MIT_SCREEN_SAVER

Provided by: libx11-protocol-other-perl_28-1_all

NAME

       X11::Protocol::Ext::MIT_SCREEN_SAVER - external screen saver support

SYNOPSIS

        use X11::Protocol;
        my $X = X11::Protocol->new;
        $X->init_extension('MIT-SCREEN-SAVER')
          or print "MIT-SCREEN-SAVER extension not available";

DESCRIPTION

       The MIT-SCREEN-SAVER extension allows a client screen saver program to draw a screen
       saver.  Any client can listen for screen saver activation too.

       A screen saver program registers itself and desired window attributes with
       "MitScreenSaverSetAttributes()" and selects saver notify events with
       "MitScreenSaverSelectInput()".  There can only be one external saver program at any one
       time.

       See examples/mit-screen-saver-external.pl in the X11-Protocol-Other sources for a complete
       screen saver program.

       See the core "SetScreenSaver()" for the usual screen idle timeout, saver cycle period, and
       the "Blank" or "Internal" builtin saver styles.  See the core "ForceScreenSaver()" to
       forcibly turn on the screen saver.

REQUESTS

The following requests are made available with an "init_extension()" per "EXTENSIONS" in
X11::Protocol.

my $bool = $X->init_extension('MIT-SCREEN-SAVER');

"($server_major, $server_minor) = $X->MitScreenSaverQueryVersion ($client_major,
$client_minor)"
Negotiate a protocol version with the server. $client_major and $client_minor is what
the client would like, the returned $server_major and $server_minor is what the server
will do, which will be the closest to the client requested version that the server
supports.

The code in this module supports 1.0. The intention would be to automatically
negotiate within "init_extension()" if/when necessary.

"($state, $window, $til_or_since, $idle, $event_mask, $kind) = $X->MitScreenSaverQueryInfo
($drawable)"
Return information about the screen saver on the screen of $drawable (an integer XID).

$state is an enum string "Off", "On", or "Disabled", per "MitScreenSaverState" below.

$window is the screen saver window, or "None". When this window exists it's an
override-redirect child of the root window but it doesn't appear in the "QueryTree()"
children of the root. This window exists when an External saver is activated but
might not exist at other times (in which case $window is "None").

$til_or_since is a period in milliseconds. If $state is "Off" then it's how long
until the saver will be activated due to idle. If $state is "On" then it's how long
in milliseconds since the saver was activated. But see "BUGS" below.

$idle is how long in milliseconds the screen has been idle. In the X.org servers this
is also available as an "IDLETIME" counter in the SYNC extension (see
X11::Protocol::Ext::SYNC).

$event_mask is the current client's mask as set by "MitScreenSaverSelectInput()"
below.

$kind is an enum string "Blanked", "Internal" or "External" for how the saver is being
done now or how it will be done when next activated, per "MitScreenSaverKind" below.

"$X->MitScreenSaverSelectInput ($drawable, $event_mask)"
Select "MitScreenSaverNotify" events from the screen of $drawable (an XID).
$event_mask has two bits,

bitpos bitval
NotifyMask 0 0x01
CycleMask 1 0x02

There's no pack function for these yet, so just give the integer bitvals, for example
0x03 for both.

"$X->MitScreenSaverSetAttributes ($drawable, $class, $depth, $visual, $x, $y, $width,
$height, $border_width, key => value, ...)"
Setup the screen saver window on the screen of $drawable (an XID).

The arguments are the same as the core "CreateWindow()", except there's no new XID to
create and the parent window is always the root window on the screen of $drawable
($drawable could be the root window already).

This setup makes the saver "External" kind on its next activation. If the saver is
currently active then it's not changed. The client can listen for
"MitScreenSaverNotify" (see "EVENTS" below) to know when the saver is activated. The
saver window XID is reported in that Notify and exposures etc can be selected on it at
that time to know when to draw, unless perhaps a background pixel or pixmap in this
"MitScreenSaverSetAttributes()" is enough.

Only one client at a time can setup a saver window like this. If another has done so
then an "Access" error results.

"$X->MitScreenSaverUnsetAttributes ($drawable)"
Unset the screen saver window. If the client did not set the window then do nothing.

This changes the saver from "External" kind back to the server builtin. If the screen
saver is currently active then that happens immediately.

At client shutdown an Unset is done automatically, unless "RetainPermanent" closedown
mode.

EVENTS

       "MitScreenSaverNotify" events are sent to the client when selected by
       "MitScreenSaverSelectInput()" above.  These events report when the screen saver state
       changes.  The event has the usual fields

           name             "MitScreenSaverNotify"
           synthetic        true if from a SendEvent
           code             integer opcode
           sequence_number  integer

       and event-specific fields

           state         "Off", "On", "Cycle"
           time          server timestamp (integer)
           root          root window of affected screen (XID)
           window        the screen saver window (XID)
           kind          "Blanked", "Internal", "External"
           forced        integer 0 or 1

       "state" is "Off" if the saver has turned off or "On" if it turned on.  "forced" is 1 if
       the change was due to a "ForceScreenSaver()" request rather than user activity/inactivity.
       On/Off events are selected by NotifyMask to "MitScreenSaverSelectInput()" above.

       "state" is "Cycle" if the saver cycling period has expired, which means it's time to show
       something different.  This is selected by CycleMask to "MitScreenSaverSelectInput()"
       above.

       "kind" is the current saver kind per "MitScreenSaverKind" below.

ENUM TYPES

       The following types are available for "$X->interp()" and "$X->num()" after
       "init_extension()".

       MitScreenSaverKind
               "Blanked"    0     video output turned off
               "Internal"   1     server builtin saver
               "External"   2     external saver client

       MitScreenSaverState
           The state of the screen saver, as returned by "MitScreenSaverQueryInfo()" and in
           "MitScreenSaverNotify" events.

               "Off"         0
               "On"          1
               "Cycle"       2
               "Disabled"    3

       For example,

           my $num = $X->num("MitScreenSaverKind", "External");
           # sets $num to 2

BUGS

       In XFree86 and X.org servers through to circa X.org 1.10, if the screen saver is activated
       with a "ForceScreenSaver()" request then the $til_or_since from
       "MitScreenSaverQueryInfo()" is a big number, apparently being a negative for the future
       time when it would have activated due to idle.  There's no attempt to do anything about
       that here.

       Also in these servers when the saver is "On" the idle timeout apparently continues to fire
       too, so the "since" of $til_or_since is only since the last firing, as if screen saver was
       re-activated, not the time since first activated, or something like that.

HOME PAGE

       <http://user42.tuxfamily.org/x11-protocol-other/index.html>

LICENSE

       Copyright 2011, 2012, 2013 Kevin Ryde

       X11-Protocol-Other is free software; you can redistribute it and/or modify it under the
       terms of the GNU General Public License as published by the Free Software Foundation;
       either version 3, or (at your option) any later version.

       X11-Protocol-Other is distributed in the hope that it will be useful, but WITHOUT ANY
       WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
       PURPOSE.  See the GNU General Public License for more details.

       You should have received a copy of the GNU General Public License along with
       X11-Protocol-Other.  If not, see <http://www.gnu.org/licenses/>.