Provided by: libxml-easyobj-perl_1.12-3_all 
NAME
XML::EasyOBJ - Easy XML object navigation
VERSION
Version 1.12
SYNOPSIS
# open exisiting file
my $doc = new XML::EasyOBJ('my_xml_document.xml');
my $doc = new XML::EasyOBJ(-type => 'file', -param => 'my_xml_document.xml');
# create object from XML string
my $doc = new XML::EasyOBJ(-type => 'string', -param => $xml_source);
# create new file
my $doc = new XML::EasyOBJ(-type => 'new', -param => 'root_tag');
# read from document
my $text = $doc->some_element($index)->getString;
my $attr = $doc->some_element($index)->getAttr('foo');
my $element = $doc->some_element($index);
my @elements = $doc->some_element;
# first "some_element" element
my $elements = $doc->some_element;
# list of "some_element" elements
my @elements = $doc->some_element;
# write to document
$doc->an_element->setString('some string')
$doc->an_element->addString('some string')
$doc->an_element->setAttr('attrname', 'val')
$doc->an_element->setAttr('attr1' => 'val', 'attr2' => 'val2')
# access elements with non-name chars and the underlying DOM
my $element = $doc->getElement('foo-bar')->getElement('bar-none');
my $dom = $doc->foobar->getDomObj;
# get elements without specifying the element name
my @elements = $doc->getElement();
my $sixth_element = $doc->getElement('', 5);
# remove elements/attrs
$doc->remElement('tagname', $index);
$doc->tag_name->remAttr($attr);
# remap builtin methods
$doc->remapMethod('getString', 's');
my $text = $doc->some_element->s;
DESCRIPTION
I wrote XML::EasyOBJ a couple of years ago because it seemed to me that the DOM wasn't very "perlish" and
the DOM is difficult for us mere mortals that don't use it on a regular basis. As I only need to process
XML on an occasionally I wanted an easy way to do what I needed to do without having to refer back to DOM
documentation each time.
A quick fact list about XML::EasyOBJ:
* Runs on top of XML::DOM
* Allows access to the DOM as needed
* Simple routines to reading and writing elements/attributes
REQUIREMENTS
XML::EasyOBJ uses XML::DOM. XML::DOM is available from CPAN (www.cpan.org).
METHODS
Below is a description of the methods avialable.
new
You can create a new object from an XML file, a string of XML, or a new document. The constructor takes
a set of key value pairs as follows:
-type
The type is either "file", "string" or "new". "file" will create the object from a file source,
"string" will create the object from a string of XML code, and "new" will create a new document
object.
-param
This value depends on the -type that is passed to the constructor. If the -type is "file" this will
be the filename to open and parse. If -type is "string", this is a string of XML code. If -type is
"new", this is the name of the root element.
Creating an object from an XML file:
my $doc = new XML::EasyOBJ(-type => 'file', -param => 'my_xml_document.xml');
Creating an object from a string containing the XML source:
my $doc = new XML::EasyOBJ(-type => 'string', -param => $xml_source);
Creating a new XML document by passing the root tag name:
my $doc = new XML::EasyOBJ(-type => 'new', -param => 'root_tag');
-expref
Passing a value of 1 will force the expansion of references when grabbing string data from the XML
file. The default value is 0, not to expand references.
Obtionally you may also pass the filename to open as the first argument instead of passing the -type and
-param parameters. This is backwards compatable with early version of XML::EasyOBJ which did not handle
-type and -param parameters.
my $doc = new XML::EasyOBJ('my_xml_document.xml');
makeNewNode( NEW_TAG )
Append a new element node to the current node. Takes the tag name as the parameter and returns the
created node as a convienence.
my $p_element = $doc->body->makeNewNode('p');
remapMethod( CUR_METHOD, NEW_METHOD )
Allows you to change the name of any of the object methods. You might want to do this for convienience or
to avoid a naming collision with an element in the document.
Two parameters need to be passed; the current name of the method and the new name. Returns 1 on a
successful mapping and undef on failure. A failure can result if you don't pass two parameters if if the
"copy from" method name does not exist.
$doc->remapMethod('getString', 's');
$doc->s();
After remapping you must use the new name if you with to remap the method again. You can call the
remapMethod method from any place in the XML tree and it will always change the method globally.
In the following example $val1 and $val2 are equal:
$doc->some_element->another_element->('getString', 's');
my $val1 = $doc->s();
$doc->remapMethod('s', 'getString');
my $val2 = $doc->getString();
getString( )
Recursively extracts text from the current node and all children element nodes. Returns the extracted
text as a single scalar value. Expands entities based on if the -expref flag was supplied during object
creation.
extractText( )
Same as getString() but does not check the -expref flag. Included for compatability with inital version
of interface.
setString( STRING )
Sets the text value of the specified element. This is done by first removing all text node children of
the current element and then appending the supplied text as a new child element.
Take this XML fragment and code for example:
<p>This elment has <b>text</b> and <i>child</i> elements</p>
$doc->p->setString('This is the new text');
This will change the fragment to this:
<p><b>text</b><i>child</i>This is the new text</p>
Because the <b> and <i> tags are not text nodes they are left unchanged, and the new text is added at the
end of the specified element.
If you need more specific control on the change you should either use the getDomObj() method and use the
DOM methods directly or remove all of the child nodes and rebuild the <p> element from scratch. Also see
the addString() method.
addString( STRING )
Adds to the the text value of the specified element. This is done by appending the supplied text as a new
child element.
Take this XML fragment and code for example:
<p>This elment has <b>text</b></p>
$doc->p->addString(' and elements');
This will change the fragment to this:
<p>This elment has <b>text</b> and elements</p>
getAttr( ATTR_NAME )
Returns the value of the named attribute.
my $val = $doc->body->img->getAttr('src');
getTagName( )
Returns the tag name of the specified element. This method is useful when you are enumerating child
elements and do not know their element names.
foreach my $element ( $doc->getElement() ) {
print $element->getTagName();
}
setAttr( ATTR_NAME, ATTR_VALUE, [ATTR_NAME, ATTR_VALUE]... )
For each name/value pair passed the attribute name and value will be set for the specified element.
remAttr( ATTR_NAME )
Removes the specified attribute from the current element.
remElement( TAG_NAME, INDEX )
Removes a child element of the current element. The name of the child element and the index must be
supplied. An index of 0 will remove the first occurance of the named element, 1 the second, 2 the third,
etc.
getElement( TAG_NAME, INDEX )
Returns the node from the tag name and index. If no index is given the first child with that name is
returned. Use this method when you have element names that include characters that are not legal as a
perl method name. For example:
<foo> <!-- root element -->
<bar>
<foo-bar>test</foo-bar>
</bar>
</foo>
# "foo-bar" is not a legal method name
print $doc->bar->getElement('foo-bar')->getString();
getDomObj( )
Returns the DOM object associated with the current node. This is useful when you need fine access via the
DOM to perform a specific function.
BEGINNER QUICK START GUIDE
Introduction
You too can write XML applications, just as long as you understand the basics of XML (elements and
attributes). You can learn to write your first program that can read data from an XML file in a mere 10
minutes.
Assumptions
It is assumed that you are familiar with the structure of the document that you are reading. Next, you
must know the basics of perl lists, loops, and how to call a function. You must also have an XML
document to read.
Simple eh?
Loading the XML document
use XML::EasyOBJ;
my $doc = new XML::EasyOBJ('my_xml_document.xml') || die "Can't make object";
Replace the string "my_xml_document.xml" with the name of your XML document. If the document is in
another directory you will need to specify the path to it as well.
The variable $doc is an object, and represents our root XML element in the document.
Reading text with getString
Each element becomes an object. So lets assume that the XML page looks like this:
<table>
<record>
<rec2 foo="bar">
<field1>field1a</field1>
<field2>field2b</field2>
<field3>field3c</field3>
</rec2>
<rec2 foo="baz">
<field1>field1d</field1>
<field2>field2e</field2>
<field3>field3f</field3>
</rec2>
</record>
</table>
As mentioned in he last step, the $doc object is the root element of the XML page. In this case the root
element is the "table" element.
To read the text of any field is as easy as navigating the XML elements. For example, lets say that we
want to retrieve the text "field2e". This text is in the "field2" element of the SECOND "rec2" element,
which is in the FIRST "record" element.
So the code to print that value it looks like this:
print $doc->record(0)->rec2(1)->field2->getString;
The "getString" method returns the text within an element.
We can also break it down like this:
# grab the FIRST "record" element (index starts at 0)
my $record = $doc->record(0);
# grab the SECOND "rec2" element within $record
my $rec2 = $record->rec2(1);
# grab the "field2" element from $rec2
# NOTE: If you don't specify an index, the first item
# is returned and in this case there is only 1.
my $field2 = $rec2->field2;
# print the text
print $field2->getString;
Reading XML attributes with getAttr
Looking at the example in the previous step, can you guess what this code will print?
print $doc->record(0)->rec2(0)->getAttr('foo');
print $doc->record(0)->rec2(1)->getAttr('foo');
If you couldn't guess, they will print out the value of the "foo" attribute of the first and second rec2
elements.
Looping through elements
Lets take our example in the previous step where we printed the attribute values and rewrite it to use a
loop. This will allow it to print all of the "foo" attributes no matter how many "rec2" elements we have.
foreach my $rec2 ( $doc->record(0)->rec2 ) {
print $rec2->getAttr('foo');
}
When we call $doc->record(0)->rec2 this way (i.e. in list context), the module will return a list of
"rec2" elements.
That's it!
You are now an XML programmer! *start rejoicing now*
PROGRAMMING NOTES
When creating a new instance of XML::EasyOBJ it will return an object reference on success, or undef on
failure. Besides that, ALL methods will always return a value. This means that if you specify an element
that does not exist, it will still return an object reference (and create that element automagically).
This is just another way to lower the bar, and make this module easier to use.
You will run into problems if you have XML tags which are named after perl's special subroutine names
(i.e. "DESTROY", "AUTOLOAD"), or if they are named after subroutines used in the module ( "getString",
"getAttr", etc ). You can get around this by using the getElement() method of using the remapMethod()
method which can be used on every object method (except AUTOLOAD and DESTROY).
AUTHOR/COPYRIGHT
Copyright (C) 2000-2002 Robert Hanson <rhanson@blast.net>
This library is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.
SEE ALSO
XML::DOM
perl v5.10.0 2009-11-07 EasyOBJ(3pm)