Provided by: libncarg-dev_6.1.2-7_amd64 
NAME
CPMPXY - Maps Conpack output from a rectangular coordinate system superimposed on the data
grid to some other coordinate system.
SYNOPSIS
CALL CPMPXY (IMAP, XINP, YINP, XOTP, YOTP)
DESCRIPTION
IMAP (INTEGER, input) is zero if the object of the call is to ask CPMPXY about its
mapping capabilities, greater than zero if the object of the call is to do a
forward mapping, and less than zero if the object of the call is to do an
inverse mapping. When IMAP is non-zero, its absolute value matches the current
value of the parameter 'MAP' and identifies the mapping to be used.
XINP (REAL, input) is used in one of three ways:
• When IMAP is zero, the value INT(XINP) is the index of a mapping about
which CPMPXY is being asked to supply information.
• When IMAP is greater than zero, XINP is the X coordinate of a point on the
contour plot. If 'XC1' = 'XCM' (the default situation), then XINP will lie
in the range from 1 to M, where M is the first dimension of the array
being contoured (equal to the value of the parameter 'ZDM'); in this case,
the X coordinate will have the same range as the first index of the data
array. If the user sets 'XC1' unequal to 'XCM', then XINP will lie in the
range from 'XC1' (corresponding to an index value of 1) to 'XCM'
(corresponding to an index value of M).
• When IMAP is less than zero, XINP is the X coordinate of a point on the
contour plot, in a coordinate system consistent with the current window,
as specified by arguments 5 through 8 of the last call to the SPPS routine
SET or by the equivalent call to GKS.
YINP (REAL, input/output) is used in one of three ways:
• When IMAP is zero, CPMPXY is expected to return one of the following
values of YINP: YINP = 0. indicates that neither the forward nor the
inverse transformation is defined. YINP = 1. indicates that the forward
transformation is defined, but the inverse is not. YINP = 2. indicates
that the forward transformation is not defined, but the inverse is.
YINP = 3. indicates that both the forward and the inverse
transformations are defined.
• When IMAP is greater than zero, YINP is the Y coordinate of a point on
the contour plot. If 'YC1' = 'YCN' (the default situation), then YINP
will lie in the range from 1 to N, where N is the second dimension of
the array being contoured (equal to the value of the parameter 'ZDN');
in this case, the Y coordinate will have the same range as the second
index of the data array. If the user sets 'YC1' unequal to 'YCN', then
YINP will lie in the range from 'YC1' (corresponding to an index value
of 1) to 'YCN' (corresponding to an index value of N).
• When IMAP is less than zero, YINP is the Y coordinate of a point on the
contour plot, in a coordinate system consistent with the current
window, as specified by arguments 5 through 8 of the last call to the
SPPS routine SET or by the equivalent call to GKS.
XOTP and YOTP
(REAL, output) are used in one of two ways:
• If IMAP is greater than zero, XOTP and YOTP are the X and Y coordinates
of a point on the contour plot, in a coordinate system consistent with
the current window, as specified by arguments 5 through 8 of the last
call to the SPPS routine SET or by the equivalent call to GKS.
• When IMAP is less than zero, XOTP and YOTP are the X and Y coordinates
of a point on the contour plot. If 'XC1' = 'XCM' (the default
situation), then XOTP will lie in the range from 1 to M, where M is the
first dimension of the array being contoured (equal to the value of the
parameter 'ZDM'); in this case, the X coordinate will have the same
range as the first index of the data array. If the user sets 'XC1'
unequal to 'XCM', then XOTP will lie in the range from 'XC1'
(corresponding to an index value of 1) to 'XCM' (corresponding to an
index value of M). Similarly, if 'YC1' = 'YCN' (the default situation),
then YOTP will lie in the range from 1 to N, where N is the second
dimension of the array being contoured (equal to the value of the
parameter 'ZDN'); in this case, the Y coordinate will have the same
range as the second index of the data array. If the user sets 'YC1'
unequal to 'YCN', then YOTP will lie in the range from 'YC1'
(corresponding to an index value of 1) to 'YCN' (corresponding to an
index value of N).
In any case, if the point (XINP,YINP) cannot be mapped for any reason,
some recognizable impossible value should be returned for both of XOTP
and YOTP and the internal parameter 'ORV' should be given that value,
thereby allowing Conpack routines that call CPMPXY to determine whether
or not a point being projected is visible or not. The value used for
this purpose by the Ezmap routines MAPTRA and MAPTRI is 1.E12.
USAGE
CPMPXY is not to be called by the user. It is called by Conpack when the parameter 'MAP'
is non-zero. Each call is intended 1) to inquire whether a given mapping is defined by
CPMPXY, or 2) to map the X and Y coordinates of a single point, whose position is known
relative to the data grid, to X and Y coordinates in some other coordinate system or 3)
(as of version 3.1.3) to do the inverse mapping. The default version of CPMPXY is as
follows:
SUBROUTINE CPMPXY (IMAP,XINP,YINP,XOTP,YOTP)
IF (IMAP.EQ.0) THEN
IF (INT(XINP).GE.1.AND.INT(XINP).LE.3) THEN
YINP=3.
ELSE
YINP=0.
END IF
ELSE IF (ABS(IMAP).EQ.1) THEN
IF (IMAP.GT.0) THEN
CALL MAPTRA (YINP,XINP,XOTP,YOTP)
ELSE
CALL MAPTRI (XINP,YINP,YOTP,XOTP)
END IF
ELSE IF (ABS(IMAP).EQ.2) THEN
IF (IMAP.GT.0) THEN
XOTP=XINP*COS(.017453292519943*YINP)
YOTP=XINP*SIN(.017453292519943*YINP)
ELSE
XOTP=SQRT(XINP*XINP+YINP*YINP)
YOTP=57.2957795130823*ATAN2(YINP,XINP)
END IF
ELSE
XOTP=XINP
YOTP=YINP
END IF
RETURN
END
When CPMPXY is called with IMAP = 0, it assumes it is being
asked to return information about its mapping capabilities.
XINP is assumed to have been given the value REAL(I), where
I is the index of a mapping about which information is
desired. CPMPXY sets YINP to indicate whether the mapping
selected by I is implemented or not and whether its inverse
is implemented or not. In the case of the default version
of CPMPXY, mappings 1 through 3 are completely implemented
(both forward and reverse), so a "3." is returned as the
value of YINP; other mappings are not implemented at all,
so a "0." is returned as the value of YINP.
When CPMPXY is called with IMAP = 1, the incoming X and Y
coordinates are assumed to represent longitude and
latitude, respectively; the Ezmap routine MAPTRA is called
to find the X and Y coordinates of the projection of the
specified point on the globe, and those coordinates are
returned as the outgoing X and Y coordinates. When IMAP =
-1, the incoming X and Y coordinates are assumed to be the X
and Y coordinates of a projected point; the Ezmap routine
MAPTRI is called to find the longitude and latitude of the
original point on the globe, and those values are returned
as the outgoing X and Y coordinates.
When IMAP = 2, the incoming X and Y coordinates are assumed
to represent rho and theta (in degrees) in polar
coordinates; from these are computed the output X and Y
coordinates. When IMAP = -2, the incoming X and Y
coordinates are used to compute rho and theta and those
values are returned.
If IMAP is anything else, the input X and Y coordinates are
simply returned as the output X and Y coordinates.
A user version of CPMPXY can be made to do any desired
mapping. It should also be made, when IMAP = 0, to return
correct information about its own capabilities.
ACCESS
To use CPMPXY, load the NCAR Graphics libraries ncarg, ncarg_gks, and ncarg_c, preferably
in that order.
SEE ALSO
Online: conpack, cpback, cpchcf, cpchcl, cpchhl, cpchil, cpchll, cpcica, cpclam, cpcldm,
cpcldr, cpcltr, cpcnrc, cpdrpl, cpezct, cpgetc, cpgeti, cpgetr, cplbam, cplbdr, cpmviw,
cpmvrw, cppkcl, cppklb, cprect, cprset, cpscae, cpsetc, cpseti, cpsetr, cpsps1, cpsps2,
ncarg_cbind
Hardcopy: NCAR Graphics Contouring and Mapping Tutorial
COPYRIGHT
Copyright (C) 1987-2009
University Corporation for Atmospheric Research
The use of this Software is governed by a License Agreement.